Standex Software Engineer Interview Guide

The 60-second brief

A Software Engineer at Standex operates at the intersection of high-precision engineering and industrial innovation. You are responsible for developing the digital and technical frameworks that support our global manufacturing operations, ranging from product design to complex quality control processes. Your work directly influences how we maintain the rigorous standards expected in our specialized markets, such as food service equipment, engraving, and electronics. This role is critical to the Standex mission of delivering "Value-Added" solutions. You will not just be writing code; you will be solving physical-world problems through software, collaborating with cross-functional teams to automate processes, improve data accuracy, and refine manufacturing workflows.

This guide is scoped to a Software Engineer candidate at Standex.

Focus areas

• Software Engineering (General)
• Quality Engineering
• Testing Strategy

The Standex interview process

Standex candidates report 4 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

Initial conversations to assess candidate's fit and technical strength.

What to demonstrate

• Initial conversations to assess candidate's fit and technical strength
• Depth in Software Engineering (General)

How to prepare

• Be able to walk your CV end to end in two minutes, and say why this company specifically.
• Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Discussions

In-depth technical discussions with team leads and hiring managers.

What to demonstrate

• In-depth technical discussions with team leads and hiring managers
• Depth in Software Engineering (General)

How to prepare

• Answer aloud and timed: Explain your process for integrating software solutions with existing hardware or manufacturing equipment.
• Answer aloud and timed: What specific tools or programming languages do you use to optimize data collection?

Behavioral Assessment

Evaluation of how candidates handle pressure and contribute to a team.

What to demonstrate

• Evaluation of how candidates handle pressure and contribute to a team
• Depth in Software Engineering (General)

How to prepare

• Prepare three examples from your own work, each with a decision you made and an outcome you can quantify.
• Re-read the description of the behavioral assessment above and write down what you would ask to confirm before it.

Final Decision

Final review and decision-making process based on all assessments.

What to demonstrate

• Final review and decision-making process based on all assessments
• Depth in Software Engineering (General)

How to prepare

• Answer aloud and timed: Describe a situation where you had to pivot your strategy due to unexpected technical constraints.
• Answer aloud and timed: How do you balance the need for speed with the requirement for long-term system maintainability?

Where candidates lose points

Contextualize your answers

Always tie your technical experience back to the impact it had on the business or the end product.

Own your mistakes

If asked about a past failure, focus on what you learned and how you changed your process as a result.

Know the products

Research the specific Standex business unit you are interviewing with to understand their unique market and engineering challenges.

Ask meaningful questions

Use your interview time to ask about the team’s current technical hurdles or the company’s engineering culture.

Questions & practice

Identify the heaviest tenants in a five-minute window under memory pressure

Medium · top-k · heavy hitters · streaming

The edge service handles about 3,000 requests per second across roughly 50,000 tenants, peaking near 9,000. Expose the 50 heaviest tenants by request count over the trailing five minutes so limits can be tightened before one tenant's backfill starves the fleet. You may not retain five minutes of raw records. Give the exact solution and its memory, then the bounded-memory approximation with its error stated as a formula, and say which you would ship and at what tenant cardinality that choice changes.

Approach

1. Do the exact version first, because it is affordable at this cardinality: a ring of 300 one-second counters per tenant, advanced lazily, is 1,200 bytes of counters per tenant and roughly 60 to 90 MB for 50,000 tenants with overhead. Carry a running total and subtract the bucket you overwrite so a window read is O(1) rather than 300 adds.
2. Extract the top 50 with a size-k min-heap over the tenant sums: O(d log k) for d tenants, against O(d log d) to sort them all. Maintaining the heap continuously instead of on query requires a tenant-to-heap-index map, because incrementing a count already inside the heap means sifting from a known position, and without that map you rebuild the heap on every request.
3. State the approximation precisely rather than gesturing at sketches. Misra-Gries with m counters retains every item whose true count exceeds N/(m+1), and each retained count underestimates the truth by at most N/(m+1). With m = 1,000 and N = 900,000 requests in the window the error is roughly 900 requests, which is fine for spotting a tenant sending 50,000 and useless for ranking two tenants 200 apart.
4. Say what breaks when the window slides: Misra-Gries and Space-Saving are insert-only and cannot be decremented as records age out. The workable construction is one summary per sub-window, say ten seconds, with 30 summaries merged at query time, and the merged error is the sum of the per-summary errors, so the bound degrades linearly in the number of sub-windows.

Follow-up

• The heaviest tenant is heavy because of one export job rather than user traffic. Should the limiter treat those as the same tenant?
• Two tenants sit tied at the boundary of the top 50. Does your answer flap, and does the flapping matter?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

1. Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
2. Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
3. State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
4. Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

• The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
• A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

Archive a resource graph without breaking live references or recursing

Medium · graph traversal · topological order · tenant isolation

Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.

Approach

1. Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
2. Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
3. Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
4. Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.

Follow-up

• The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
• The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?

Keep soft-deleted accounts from blocking re-registration

Easy · soft delete · unique constraints · engine differences

app_user holds user_id, tenant_id, email CITEXT, password_hash (NULL for SSO principals), email_verified_at, auth_version, status ('invited','active','suspended','deactivated'), created_at, updated_at, deleted_at. Two live accounts for one address inside a tenant must be impossible, but an address freed by a soft delete must be reusable, and the same tenant may delete and re-register it repeatedly. Write the uniqueness DDL for PostgreSQL 16, then the equivalent for MySQL 8 where partial indexes do not exist, and say what each permits once three deleted rows already hold that address.

Approach

1. Start from what is actually unique: not (tenant_id, email), but (tenant_id, email) among live rows. PostgreSQL says that directly — CREATE UNIQUE INDEX app_user_live_email ON app_user (tenant_id, email) WHERE deleted_at IS NULL. A full constraint over the same two columns burns the address permanently the first time someone deletes an account.
2. Keep case-insensitivity in the type or the index, never in the application: CITEXT as given, or UNIQUE (tenant_id, lower(email)) as an expression index where the extension is unavailable. A case-sensitive unique column is exactly how two accounts for one human appear.
3. For MySQL 8 the predicate has to move inside the key: add a discriminator column that is a constant 0 while the row is live and is set to user_id on delete, with UNIQUE (tenant_id, email, deleted_marker). Live rows share the constant and still collide; deleted rows differ from each other and stop colliding.
4. State the NULL variant and its dependency: leaving the marker NULL for deleted rows also works, because a unique index treats NULLs as distinct — true in MySQL, and true in PostgreSQL only under the default NULLS DISTINCT, which PostgreSQL 15 lets you reverse. Check the polarity against the three existing deleted rows: constant-on-live is what preserves the collision you want, and reversing it silently admits duplicate live accounts.

Follow-up

• A deleted account re-registers with the same address the next day. Do the old resource rows follow the new user_id, and how does the API keep the two principals apart?
• How do you honour an erasure request while resource_revision.actor_user_id still references this table?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

1. One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
2. Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
3. State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
4. Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.

Follow-up

• A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
• Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?

How do you ensure your code or software designs meet strict quality and compliance standards?

Medium · Technical & Domain Expertise

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

Explain your process for integrating software solutions with existing hardware or manufacturing equipment.

Medium · Technical & Domain Expertise

Approach

1. Say who the caller is and what they do when the call fails halfway.
2. Define the identity of a request so a retry cannot double-apply it.
3. Separate accepted, pending, failed and confirmed; they are different facts.
4. Design the error taxonomy before the success shape; callers branch on it.

Follow-up

• What happens if the caller retries after a timeout?
• How does a client discover it is on an old version of this contract?

What specific tools or programming languages do you use to optimize data collection?

Medium · Technical & Domain Expertise

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How do you approach the testing phase when developing software for critical infrastructure?

Medium · Technical & Domain Expertise

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

Walk me through your design process when starting a new project from scratch.

Medium · Problem-Solving & Methodology

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

Describe a situation where you had to pivot your strategy due to unexpected technical constraints.

Medium · Problem-Solving & Methodology

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How do you balance the need for speed with the requirement for long-term system maintainability?

Medium · Problem-Solving & Methodology

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

One customer endpoint stalls deliveries to every other destination

Medium · bulkhead · timeouts · saturation

The egress service delivers about 1.5k webhooks/second across 40,000 destinations, with a per-destination concurrency cap of 4 and a 10-second connect-plus-read timeout. Throughput falls to 300/second, queue depth climbs, and p99 delivery latency for unaffected destinations goes from 200 ms to minutes, while the error rate barely moves. One tenant holds 900 destination rows whose URLs share a hostname that now answers in 9.5 seconds. Explain the mechanism with the arithmetic, then give the containment in the order you would apply it.

Approach

1. Look at saturation before errors. A flat error rate with collapsing throughput says nothing is failing, things are waiting, so the first signal to pull is in-flight request count or pool wait time rather than the error counter. This is the distinction that decides the whole investigation.
2. Group in-flight work by resolved host, not by destination id. The cap is keyed per destination row, so 900 rows sharing one hostname buy 3,600 concurrent slots against a single host, each held for 9.5 seconds. The bulkhead was never a bulkhead for that host, and grouping by the wrong dimension is why the dashboard looked healthy.
3. Do the arithmetic in both directions. Required concurrency is arrival rate times latency, so 1.5k/second at 200 ms needs about 300 in flight, which is entirely consumed by 3,600 slow slots; conversely whatever concurrency is left sustains rate equals concurrency divided by 9.5 seconds, which is the 300/second you are seeing. Matching both numbers is what promotes this from a plausible story to the mechanism.
4. Explain why the circuit breaker never helped. It opens on consecutive failures, and a 9.5-second response inside a 10-second timeout is a success. Slow is not failing, so an error-rate breaker cannot see this; you need a slow-call ratio, a deadline propagated from the caller's remaining budget, or a concurrency limiter.

Follow-up

• The host recovers to 80 ms. How long does the queue take to drain, and what does the drain do to the recovered host?
• Where should the 10-second timeout number actually come from?

Suggested practice checklist

Built from the rounds and topics Standex candidates report.

Day 1 — Map the Standex loop

• Write out the reported sequence: Initial Screening, Technical Discussions, Behavioral Assessment, Final Decision.
• For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 4 reported rounds, with the weakest marked.

Day 2 — Work Software Engineering (General)

• Spend the session on Software Engineering (General), which Standex candidates report being tested on.
• Write one worked example in Software Engineering (General) and time yourself on it.

Deliverable: One timed worked example in Software Engineering (General).

Day 3 — Work Quality Engineering

• Spend the session on Quality Engineering, which Standex candidates report being tested on.
• Write one worked example in Quality Engineering and time yourself on it.

Deliverable: One timed worked example in Quality Engineering.

Day 4 — Work Testing Strategy

• Spend the session on Testing Strategy, which Standex candidates report being tested on.
• Write one worked example in Testing Strategy and time yourself on it.

Deliverable: One timed worked example in Testing Strategy.

Day 5 — Answer out loud: Technical & Domain Expertise

• Answer aloud, timed: Describe a time you had to troubleshoot a complex technical issue under a tight deadline.
• Answer aloud, timed: How do you ensure your code or software designs meet strict quality and compliance standards?

Deliverable: Spoken answers to 2 reported Technical & Domain Expertise question(s), under time.

Day 6 — Answer out loud: Problem-Solving & Methodology

• Answer aloud, timed: Walk me through your design process when starting a new project from scratch.
• Answer aloud, timed: Describe a situation where you had to pivot your strategy due to unexpected technical constraints.

Deliverable: Spoken answers to 2 reported Problem-Solving & Methodology question(s), under time.

Day 7 — Answer out loud: Behavioral & Collaboration

• Answer aloud, timed: Give an example of how you explained a highly technical concept to a non-technical stakeholder.
• Answer aloud, timed: Describe a time you disagreed with a team member on a technical approach; how did you resolve it?

Deliverable: Spoken answers to 2 reported Behavioral & Collaboration question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Describe a time you had to troubleshoot a complex technical issue under a tight deadline.

Medium · Technical & Domain Expertise

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Tell me about a time you identified a process inefficiency and developed a software-based solution.

Medium · Problem-Solving & Methodology

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Give an example of how you explained a highly technical concept to a non-technical stakeholder.

Medium · Behavioral & Collaboration

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Describe a time you disagreed with a team member on a technical approach; how did you resolve it?

Medium · Behavioral & Collaboration

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

What steps do you take to ensure your work is well-documented and accessible to others?

Medium · Behavioral & Collaboration

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?