cswork / libraryOpen practice workspace

Interview guides · SomaLogic Operating

SomaLogic Operating Software Engineer Interview Guide

SomaLogic Operating Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

As a Software Engineer at SomaLogic Operating, you will be at the forefront of developing and enhancing the advanced analytical tools that drive our innovative health solutions. This role is critical to the company as it contributes directly to the development of software systems that enable cutting-edge proteomics research and applications, impacting patient care and scientific discovery. Your work will directly influence how our products operate, optimizing them for reliability, scalability, and user experience. In this position, you will collaborate with multi-disciplinary teams, including data scientists and biologists, to create software that interprets complex biological data. The challenges you face will range from improving data processing algorithms to developing user-friendly interfaces, all while maintaining a focus on quality and efficiency.

This guide is scoped to a Software Engineer candidate at SomaLogic Operating.

Focus areas

  • Technical Interviewing (Code Review)
  • Portfolio / Project Presentation
  • Technical Communication

The SomaLogic Operating interview process

SomaLogic Operating candidates report 3 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening Call

A call with HR to evaluate your background and fit for the role.

What to demonstrate

  • A call with HR to evaluate your background and fit for the role
  • Depth in Technical Interviewing (Code Review)

How to prepare

  • Be able to walk your CV end to end in two minutes, and say why this company specifically.
  • Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Interview

Present your prior projects and demonstrate your technical capabilities.

What to demonstrate

  • Present your prior projects and demonstrate your technical capabilities
  • Depth in Technical Interviewing (Code Review)

How to prepare

  • Answer aloud and timed: Can you explain the difference between synchronous and asynchronous programming?
  • Answer aloud and timed: Describe a challenging technical problem you faced and how you resolved it.

Multiple Team Interviews

Interviews with team members to discuss your experience and potential contributions.

What to demonstrate

  • Interviews with team members to discuss your experience and potential contributions
  • Depth in Technical Interviewing (Code Review)

How to prepare

  • Answer aloud and timed: What are the key considerations when developing scalable applications?
  • Answer aloud and timed: How would you design a system to handle real-time data processing?

Where candidates lose points

Practice Coding

Regularly practice coding problems on platforms such as LeetCode or HackerRank to sharpen your algorithm skills.

Understand the Company

Research SomaLogic Operating thoroughly; understand its products, mission, and the industries it serves.

Prepare Your Projects

Be ready to discuss your past projects in detail, including challenges faced and how you overcame them.

Ask Insightful Questions

Prepare thoughtful questions for your interviewers that demonstrate your interest in the role and the company.

Questions & practice

Can you explain the difference between synchronous and asynchronous programming?

Medium · Technical / Domain Questions

Approach

  1. Say what the runtime actually does before reasoning about the code.
  2. Name what is shared across threads and what owns each piece of state.
  3. Identify the window where an invariant is briefly untrue.
  4. Distinguish a value from a reference to it, and say which one you handed out.

Follow-up

  • What happens if two callers reach this at the same time?
  • Where could this allocate more than you expect?

Write a function to reverse a linked list.

Medium · Coding / Algorithms

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Given a string, find the longest substring without repeating characters.

Medium · Coding / Algorithms

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

How would you implement a binary search algorithm?

Medium · Coding / Algorithms

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Solve a problem involving sorting and searching in an array.

Medium · Coding / Algorithms

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Explain the time and space complexity of your solutions.

Medium · Coding / Algorithms

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Explain why the owner filter ignores the listing index

Medium · composite index · query plans · sort elimination

The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.

Approach

  1. Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
  2. For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
  3. Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
  4. Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.

Follow-up

  • 90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
  • A dashboard runs this for 40 owners in one page load. What changes about the design?

Denormalise tenant onto revisions and backfill it live

Hard · denormalisation · online migration · backfill

resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.

Approach

  1. Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
  2. Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
  3. Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
  4. Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.

Follow-up

  • The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
  • How do you verify the backfill actually finished, given rows are still being inserted while it runs?

What design patterns have you used, and how have they benefited your projects?

Medium · Technical / Domain Questions

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

Describe a challenging technical problem you faced and how you resolved it.

Medium · Technical / Domain Questions

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

What are the key considerations when developing scalable applications?

Medium · Technical / Domain Questions

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

How would you design a system to handle real-time data processing?

Medium · System Design / Architecture

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

Discuss how you would approach scaling a web application.

Medium · System Design / Architecture

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

What factors would you consider when designing a RESTful API?

Medium · System Design / Architecture

Approach

  1. Say who the caller is and what they do when the call fails halfway.
  2. Define the identity of a request so a retry cannot double-apply it.
  3. Separate accepted, pending, failed and confirmed; they are different facts.
  4. Design the error taxonomy before the success shape; callers branch on it.

Follow-up

  • What happens if the caller retries after a timeout?
  • How does a client discover it is on an old version of this contract?

How do you ensure the security of a software application?

Medium · System Design / Architecture

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

If a critical feature fails just before a release, what steps would you take?

Medium · Problem-Solving / Case Studies

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

How would you approach optimizing a slow-running application?

Medium · Problem-Solving / Case Studies

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

Describe a project where you had to navigate ambiguity.

Medium · Problem-Solving / Case Studies

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

If you were given incomplete requirements, how would you proceed?

Medium · Problem-Solving / Case Studies

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

Propose a solution for reducing latency in a distributed system.

Medium · Problem-Solving / Case Studies

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

How do you approach debugging an application?

Medium · Technical / Domain Questions

Approach

  1. Establish what changed and when, before forming any theory.
  2. Pick a bisection that eliminates candidates whichever way it turns out.
  3. Check the instrumentation before believing the symptom.
  4. Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

  • What would you look at first, and what would it rule out?
  • How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the rounds and topics SomaLogic Operating candidates report.

Day 1 — Map the SomaLogic Operating loop

  • Write out the reported sequence: Initial Screening Call, Technical Interview, Multiple Team Interviews.
  • For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 3 reported rounds, with the weakest marked.

Day 2 — Work Technical Interviewing (Code Review)

  • Spend the session on Technical Interviewing (Code Review), which SomaLogic Operating candidates report being tested on.
  • Write one worked example in Technical Interviewing (Code Review) and time yourself on it.

Deliverable: One timed worked example in Technical Interviewing (Code Review).

Day 3 — Work Portfolio / Project Presentation

  • Spend the session on Portfolio / Project Presentation, which SomaLogic Operating candidates report being tested on.
  • Write one worked example in Portfolio / Project Presentation and time yourself on it.

Deliverable: One timed worked example in Portfolio / Project Presentation.

Day 4 — Work Technical Communication

  • Spend the session on Technical Communication, which SomaLogic Operating candidates report being tested on.
  • Write one worked example in Technical Communication and time yourself on it.

Deliverable: One timed worked example in Technical Communication.

Day 5 — Answer out loud: Technical / Domain Questions

  • Answer aloud, timed: How do you approach debugging an application?
  • Answer aloud, timed: What design patterns have you used, and how have they benefited your projects?

Deliverable: Spoken answers to 2 reported Technical / Domain Questions question(s), under time.

Day 6 — Answer out loud: System Design / Architecture

  • Answer aloud, timed: How would you design a system to handle real-time data processing?
  • Answer aloud, timed: Discuss how you would approach scaling a web application.

Deliverable: Spoken answers to 2 reported System Design / Architecture question(s), under time.

Day 7 — Answer out loud: Behavioral / Leadership

  • Answer aloud, timed: Tell me about a time when you had to work with a difficult team member.
  • Answer aloud, timed: How do you prioritize your tasks when managing multiple projects?

Deliverable: Spoken answers to 2 reported Behavioral / Leadership question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Describe a time you had to modify an existing system architecture. What was your approach?

Medium · System Design / Architecture

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Tell me about a time when you had to work with a difficult team member.

Medium · Behavioral / Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you prioritize your tasks when managing multiple projects?

Medium · Behavioral / Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Describe an instance where you had to advocate for your technical perspective.

Medium · Behavioral / Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

What motivates you to excel in your work?

Medium · Behavioral / Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you handle feedback or criticism of your work?

Medium · Behavioral / Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?