SiloSmashers Software Engineer Interview Guide

The 60-second brief

As a Software Engineer at SiloSmashers, you serve as a critical architect of technical solutions that bolster high-stakes IT infrastructure. You are not just writing code; you are building, testing, and deploying complex applications that enable large-scale data processing, statistical modeling, and advanced analytics. Your work directly influences how the organization manages its operational efficiency and technical capabilities. This role is uniquely positioned at the intersection of hands-on development and strategic architectural oversight. Whether you are integrating third-party components, automating maintenance tasks, or modifying existing systems for better performance, you will operate under the guidance of lead architects while taking ownership of the full software development life cycle.

This guide is scoped to a Software Engineer candidate at SiloSmashers.

Focus areas

• Software Development Life Cycle (SDLC)
• Application Design
• Application Development

The SiloSmashers interview process

SiloSmashers candidates report 3 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Screening Call

Initial call to align on your background and the specific requirements of the role.

What to demonstrate

• Initial call to align on your background and the specific requirements of the role
• Depth in Software Development Life Cycle (SDLC)

How to prepare

• Be able to walk your CV end to end in two minutes, and say why this company specifically.
• Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Deep Dives

Series of interviews focusing on technical skills and system architecture.

What to demonstrate

• Series of interviews focusing on technical skills and system architecture
• Depth in Software Development Life Cycle (SDLC)

How to prepare

• Answer aloud and timed: What is your process for ensuring quality assurance and testing in a large-scale data processing environment?
• Answer aloud and timed: How do you balance the need for custom capabilities versus utilizing off-the-shelf software solutions?

Behavioral Assessments

Evaluations to assess your behavioral fit and aptitude for an agile environment.

What to demonstrate

• Evaluations to assess your behavioral fit and aptitude for an agile environment
• Depth in Software Development Life Cycle (SDLC)

How to prepare

• Prepare three examples from your own work, each with a decision you made and an outcome you can quantify.
• Re-read the description of the behavioral assessments above and write down what you would ask to confirm before it.

Where candidates lose points

Prepare for "What If" scenarios

Our interviewers love to ask how you would handle a sudden change in requirements or a failure in a production environment.

Connect to the mission

Show that you understand the importance of the IT infrastructure work we do and how your code supports the broader mission objectives.

Be clear about your role in a team

When discussing your accomplishments, clearly distinguish between your individual contributions and the work of the team.

Practice your "Technical Storytelling

Be able to explain a complex technical problem you solved as if you were presenting it to a lead architect.

Questions & practice

Identify the heaviest tenants in a five-minute window under memory pressure

Medium · top-k · heavy hitters · streaming

The edge service handles about 3,000 requests per second across roughly 50,000 tenants, peaking near 9,000. Expose the 50 heaviest tenants by request count over the trailing five minutes so limits can be tightened before one tenant's backfill starves the fleet. You may not retain five minutes of raw records. Give the exact solution and its memory, then the bounded-memory approximation with its error stated as a formula, and say which you would ship and at what tenant cardinality that choice changes.

Approach

1. Do the exact version first, because it is affordable at this cardinality: a ring of 300 one-second counters per tenant, advanced lazily, is 1,200 bytes of counters per tenant and roughly 60 to 90 MB for 50,000 tenants with overhead. Carry a running total and subtract the bucket you overwrite so a window read is O(1) rather than 300 adds.
2. Extract the top 50 with a size-k min-heap over the tenant sums: O(d log k) for d tenants, against O(d log d) to sort them all. Maintaining the heap continuously instead of on query requires a tenant-to-heap-index map, because incrementing a count already inside the heap means sifting from a known position, and without that map you rebuild the heap on every request.
3. State the approximation precisely rather than gesturing at sketches. Misra-Gries with m counters retains every item whose true count exceeds N/(m+1), and each retained count underestimates the truth by at most N/(m+1). With m = 1,000 and N = 900,000 requests in the window the error is roughly 900 requests, which is fine for spotting a tenant sending 50,000 and useless for ranking two tenants 200 apart.
4. Say what breaks when the window slides: Misra-Gries and Space-Saving are insert-only and cannot be decremented as records age out. The workable construction is one summary per sub-window, say ten seconds, with 30 summaries merged at query time, and the merged error is the sum of the per-summary errors, so the bound degrades linearly in the number of sub-windows.

Follow-up

• The heaviest tenant is heavy because of one export job rather than user traffic. Should the limiter treat those as the same tenant?
• Two tenants sit tied at the boundary of the top 50. Does your answer flap, and does the flapping matter?

Find overlapping job attempts and peak concurrency from lease records

Medium · sweep line · intervals · leases

A day of job_run history yields about 50,000,000 attempt records: (job_run_id, job_type, attempt, started_at, finished_at which is NULL when the worker died, lease_expires_at). Leases expire on a clock, so a job that outran its lease ran twice. Produce (a) every job_run_id whose attempts overlapped in wall-clock time and (b) the peak number of simultaneously running attempts per job_type with the minute it occurred. Target O(n log n). State how you treat a NULL finished_at and what clock skew does to your answer.

Approach

1. Define the interval before sorting anything: an attempt occupies [started_at, COALESCE(finished_at, lease_expires_at)). finished_at is observed and lease_expires_at is only a promise, so every attempt without a finish contributes an estimate and the whole result is a lower bound on overlap rather than an exact count.
2. For peak concurrency, sweep: emit 2n endpoints, sort by (timestamp, kind) with ends ordered before starts at equal timestamps, then walk the sequence maintaining a counter per job_type and record each type's maximum with its timestamp. O(n log n) dominated by the sort, O(n) space, or O(1) extra if the sort is external and the walk streams.
3. For overlap detection, do not compare attempts pairwise. A single global sort by (job_run_id, started_at) gives both the grouping and the order; within a group, keep the maximum end seen so far and report an overlap exactly when the next start is less than that running maximum, which is one linear pass after the sort.
4. Half-open intervals matter and are easy to get wrong: with closed intervals an attempt ending at the same millisecond another begins reads as concurrency two, and across 50,000,000 records that artefact swamps the real signal.

Follow-up

• A handler is not idempotent and you have found 400 overlapping jobs. Which of them actually caused damage, and what would you query to find out?
• Peak concurrency for one job_type is 4 against a configured cap of 4. Is the cap working, or is the data hiding attempts that never started?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

1. Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
2. Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
3. State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
4. Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

• The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
• A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

Stop tag and share joins from fanning out a page

Medium · join fan-out · semi-joins · many-to-many

resource_tag is (resource_id, tag_id) with PK (resource_id, tag_id); resource_share is (resource_id, shared_with_user_id, permission). The tagged-and-shared listing inner-joins resource to both, filters tenant_id, tag_id = ANY($2) and shared_with_user_id = $3, orders by updated_at DESC and takes 50. Pages come back with fewer than 50 distinct resources and the total in the header is far too high. Explain the row multiplication, rewrite both the page query and the count query so each is correct, and name the index each one needs. PostgreSQL 16.

Approach

1. Do the arithmetic against the predicates that are actually there. An inner join emits one row per matching child row, and both joins are filtered: tag_id = ANY($2) admits only the requested tags, shared_with_user_id = $3 admits one user's share rows. So a resource holding three of the requested tags and shared with $3 once yields three rows, not one — the multiplier is its count of matching tags times its share rows for that single user, and that second factor is 1 unless the table admits duplicate (resource_id, shared_with_user_id) pairs. LIMIT 50 then limits rows rather than resources, and COUNT(*) counts pairs — the header is the product, not the population.
2. Reject DISTINCT as the fix. It deduplicates after the product has been built, so the planner must materialise and sort the fanned-out set before the LIMIT can apply, and it leaves any SUM or AVG in the same select list wrong.
3. Rewrite both filters as semi-joins, keeping resource as the only row source: AND EXISTS (SELECT 1 FROM resource_tag rt WHERE rt.resource_id = r.resource_id AND rt.tag_id = ANY($2)) and the same shape against resource_share. A semi-join stops at the first match per resource and preserves the driving index order, so ORDER BY updated_at DESC, resource_id DESC LIMIT 50 still stops after 50 rows.
4. Count with the same predicates and no join at all: SELECT count(*) FROM resource r WHERE r.tenant_id = $1 AND r.status = 'active' AND EXISTS (...) AND EXISTS (...). Nothing multiplies a resource, so the number is the population.

Follow-up

• The filter changes from 'any of these tags' to 'all of these tags'. Rewrite it and state what it costs relative to the ANY form.
• A resource can be shared with the same user twice under different permissions. Does your count change, and should it?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

1. Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
2. Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
3. Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
4. State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.

Follow-up

• A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
• The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?

How do you approach the programmatic integration of third-party components into an existing infrastructure?

Medium · Technical Proficiency & Application Deve

Approach

1. Say who the caller is and what they do when the call fails halfway.
2. Define the identity of a request so a retry cannot double-apply it.
3. Separate accepted, pending, failed and confirmed; they are different facts.
4. Design the error taxonomy before the success shape; callers branch on it.

Follow-up

• What happens if the caller retries after a timeout?
• How does a client discover it is on an old version of this contract?

What is your process for ensuring quality assurance and testing in a large-scale data processing environment?

Medium · Technical Proficiency & Application Deve

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How do you balance the need for custom capabilities versus utilizing off-the-shelf software solutions?

Medium · Technical Proficiency & Application Deve

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How do you approach the design phase when working under the direction of lead architects?

Medium · Architectural & Analytical Thinking

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

How do you conduct resource estimation for a new software development project?

Medium · Architectural & Analytical Thinking

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

What steps do you take to ensure your code architecture is scalable and aligned with long-term infrastructure

Medium · Architectural & Analytical Thinking

What steps do you take to ensure your code architecture is scalable and aligned with long-term infrastructure goals?

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

Read latency spikes on a sixty-second sawtooth

Medium · cache stampede · single-flight · ttl

The cached listing read path serves about 14k reads/second at an 85% hit rate. p99 sits at 35 ms for 57 seconds, jumps to 900 ms for 3, and repeats. During each spike the primary shows several hundred identical listing queries starting within the same millisecond, all carrying one large tenant's id. Cache entries use a 60-second TTL. Give the mechanism, the ordered checks, the fix, and the correctness hazard your fix must not introduce.

Approach

1. Match the period to a configured number before theorising about load. A spike every 60 seconds against a 60-second TTL is an entry expiring, and you confirm it by correlating spike timestamps with the entry's write time rather than with the traffic curve. If the period had matched a cron or a GC interval instead, this is a different investigation.
2. Establish the concurrency of the miss. Several hundred identical queries in one millisecond means the miss path has no coalescing: every request that arrives between expiry and repopulation recomputes. The herd size is that key's arrival rate times its recompute time, so at 1.2k reads/second for the hot key and a 250 ms recompute you expect about 300 concurrent misses, which matches what is observed.
3. Add single-flight on the miss path so one caller per key recomputes under a short-lived lock while the rest wait for its result. Prefer stale-while-revalidate where the read tolerates it: return the expired value immediately and refresh asynchronously, which removes the latency spike rather than serialising it into a queue of waiters.
4. De-synchronise the keys. Write TTLs with jitter, for example 60 seconds plus or minus 10%, so a deploy or a mass invalidation does not align every key on the same second and turn a per-key herd into a fleet-wide one.

Follow-up

• The same sawtooth appears on a key that is invalidated on write rather than expired. Is that the same bug?
• How does your answer change if the recompute takes 4 seconds instead of 250 ms?

Suggested practice checklist

Built from the rounds and topics SiloSmashers candidates report.

Day 1 — Map the SiloSmashers loop

• Write out the reported sequence: Screening Call, Technical Deep Dives, Behavioral Assessments.
• For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 3 reported rounds, with the weakest marked.

Day 2 — Work Software Development Life Cycle (SDLC)

• Spend the session on Software Development Life Cycle (SDLC), which SiloSmashers candidates report being tested on.
• Write one worked example in Software Development Life Cycle (SDLC) and time yourself on it.

Deliverable: One timed worked example in Software Development Life Cycle (SDLC).

Day 3 — Work Application Design

• Spend the session on Application Design, which SiloSmashers candidates report being tested on.
• Write one worked example in Application Design and time yourself on it.

Deliverable: One timed worked example in Application Design.

Day 4 — Work Application Development

• Spend the session on Application Development, which SiloSmashers candidates report being tested on.
• Write one worked example in Application Development and time yourself on it.

Deliverable: One timed worked example in Application Development.

Day 5 — Answer out loud: Technical Proficiency & Application Development

• Answer aloud, timed: How do you approach the programmatic integration of third-party components into an existing infrastructure?
• Answer aloud, timed: Can you describe a time you had to modify existing code to significantly enhance its performance or functionality?

Deliverable: Spoken answers to 2 reported Technical Proficiency & Application Development question(s), under time.

Day 6 — Answer out loud: Architectural & Analytical Thinking

• Answer aloud, timed: How do you approach the design phase when working under the direction of lead architects?
• Answer aloud, timed: Describe your experience with computationally intensive statistical modeling or advanced analytics.

Deliverable: Spoken answers to 2 reported Architectural & Analytical Thinking question(s), under time.

Day 7 — Answer out loud: Behavioral & Leadership

• Answer aloud, timed: Describe a time you recommended a process improvement that significantly automated operations or maintenance.
• Answer aloud, timed: How do you approach knowledge transfer and mentoring junior team members?

Deliverable: Spoken answers to 2 reported Behavioral & Leadership question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Can you describe a time you had to modify existing code to significantly enhance its performance or functional

Medium · Technical Proficiency & Application Deve

Can you describe a time you had to modify existing code to significantly enhance its performance or functionality?

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Explain your experience with the Microsoft 365 Power Platform and SharePoint in an enterprise environment.

Medium · Technical Proficiency & Application Deve

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Describe your experience with computationally intensive statistical modeling or advanced analytics.

Medium · Architectural & Analytical Thinking

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Describe a time you recommended a process improvement that significantly automated operations or maintenance.

Medium · Behavioral & Leadership

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

How do you approach knowledge transfer and mentoring junior team members?

Medium · Behavioral & Leadership

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Tell me about a time you had to participate in a technical project milestone review. How did you handle feedba

Medium · Behavioral & Leadership

Tell me about a time you had to participate in a technical project milestone review. How did you handle feedback?

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?