Interview guides · SierTeK

SierTeK Software Engineer Interview Guide

SierTeK Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

As a Software Engineer at SierTeK, you are a critical contributor to the technological infrastructure that powers our mission-critical operations. This role is not merely about writing code; it is about architecting robust, scalable, and secure solutions that directly support our clients' complex requirements. Whether you are working as a Database Developer or a Web Developer, your output serves as the backbone for operational efficiency and data integrity. You will operate within a fast-paced, mission-focused environment where your technical decisions have a tangible impact on project delivery. SierTeK values engineers who can bridge the gap between abstract requirements and functional, high-quality software. You will be expected to demonstrate technical versatility, a proactive problem-solving mindset, and the ability to thrive in a collaborative team setting.

This guide is scoped to a Software Engineer candidate at SierTeK.

Focus areas

Software Engineering (General)
Programming Experience
Database Development

The SierTeK interview process

SierTeK candidates report 4 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

The process begins with an initial screening to assess candidate fit.

What to demonstrate

The process begins with an initial screening to assess candidate fit
Depth in Software Engineering (General)

How to prepare

Be able to walk your CV end to end in two minutes, and say why this company specifically.
Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Behavioral Discussion

Candidates engage in conversation-heavy discussions about their professional journey.

What to demonstrate

Candidates engage in conversation-heavy discussions about their professional journey
Depth in Software Engineering (General)

How to prepare

Prepare three examples from your own work, each with a decision you made and an outcome you can quantify.
Re-read the description of the behavioral discussion above and write down what you would ask to confirm before it.

Technical Deep-Dive

Candidates discuss past projects and technical experiences relevant to the Software Engineer position.

What to demonstrate

Candidates discuss past projects and technical experiences relevant to the Software Engineer position
Depth in Software Engineering (General)

How to prepare

Answer aloud and timed: Why are you interested in joining SierTeK as a Software Engineer?
Answer aloud and timed: What programming languages are you most proficient in, and why?

Final Interview Stages

The process culminates in final interview stages to ensure mutual fit.

What to demonstrate

The process culminates in final interview stages to ensure mutual fit
Depth in Software Engineering (General)

How to prepare

Answer aloud and timed: How do you approach debugging or troubleshooting a piece of code that is failing in production?
Answer aloud and timed: What is your experience with database management or web development frameworks?

Where candidates lose points

Own your story

Be prepared to speak in detail about any project listed on your resume. If you mention it, be ready to explain the "why" behind every technical choice.

Be conversational

The interviewers are looking for a colleague. Don't be afraid to ask questions about the team's current challenges or the project goals.

Focus on the "how

When describing past work, emphasize your process—how you identified the problem, how you chose the solution, and how you validated the result.

Prepare a few questions for the interviewer

Asking about the team's tech stack or the biggest challenges they are currently facing shows that you are already thinking like a member of the team.

Questions & practice

Find overlapping job attempts and peak concurrency from lease records

Medium · sweep line · intervals · leases

A day of job_run history yields about 50,000,000 attempt records: (job_run_id, job_type, attempt, started_at, finished_at which is NULL when the worker died, lease_expires_at). Leases expire on a clock, so a job that outran its lease ran twice. Produce (a) every job_run_id whose attempts overlapped in wall-clock time and (b) the peak number of simultaneously running attempts per job_type with the minute it occurred. Target O(n log n). State how you treat a NULL finished_at and what clock skew does to your answer.

Approach

Define the interval before sorting anything: an attempt occupies [started_at, COALESCE(finished_at, lease_expires_at)). finished_at is observed and lease_expires_at is only a promise, so every attempt without a finish contributes an estimate and the whole result is a lower bound on overlap rather than an exact count.
For peak concurrency, sweep: emit 2n endpoints, sort by (timestamp, kind) with ends ordered before starts at equal timestamps, then walk the sequence maintaining a counter per job_type and record each type's maximum with its timestamp. O(n log n) dominated by the sort, O(n) space, or O(1) extra if the sort is external and the walk streams.
For overlap detection, do not compare attempts pairwise. A single global sort by (job_run_id, started_at) gives both the grouping and the order; within a group, keep the maximum end seen so far and report an overlap exactly when the next start is less than that running maximum, which is one linear pass after the sort.
Half-open intervals matter and are easy to get wrong: with closed intervals an attempt ending at the same millisecond another begins reads as concurrency two, and across 50,000,000 records that artefact swamps the real signal.

Follow-up

A handler is not idempotent and you have found 400 overlapping jobs. Which of them actually caused damage, and what would you query to find out?
Peak concurrency for one job_type is 4 against a configured cap of 4. Is the cap working, or is the data hiding attempts that never started?

Diff a projection against the primary without per-row point reads

Hard · reconciliation · range hashing · throttling

The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.

Approach

Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.

Follow-up

The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.

Follow-up

A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?

Denormalise tenant onto revisions and backfill it live

Hard · denormalisation · online migration · backfill

resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.

Approach

Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.

Follow-up

The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
How do you verify the backfill actually finished, given rows are still being inserted while it runs?

What programming languages are you most proficient in, and why?

Medium · Technical Fundamentals

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

How do you ensure your code is maintainable and scalable?

Medium · Technical Fundamentals

Approach

Fix the scope first: who calls this, how often, and what they do when it fails.
Name the read and write paths separately; they rarely have the same bottleneck.
Choose a partition key and say what query it makes expensive.
State the consistency you need, and where you are willing to be stale.

Follow-up

What breaks first when traffic grows ten times?
How does this behave when that dependency is down for an hour?

Can you explain a concept you recently learned and how you applied it to a project?

Medium · Technical Fundamentals

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

How do you approach debugging or troubleshooting a piece of code that is failing in production?

Medium · Technical Fundamentals

Approach

Establish what changed and when, before forming any theory.
Pick a bisection that eliminates candidates whichever way it turns out.
Check the instrumentation before believing the symptom.
Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

What would you look at first, and what would it rule out?
How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the rounds and topics SierTeK candidates report.

Day 1 — Map the SierTeK loop

Write out the reported sequence: Initial Screening, Behavioral Discussion, Technical Deep-Dive, Final Interview Stages.
For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 4 reported rounds, with the weakest marked.

Day 2 — Work Software Engineering (General)

Spend the session on Software Engineering (General), which SierTeK candidates report being tested on.
Write one worked example in Software Engineering (General) and time yourself on it.

Deliverable: One timed worked example in Software Engineering (General).

Day 3 — Work Programming Experience

Spend the session on Programming Experience, which SierTeK candidates report being tested on.
Write one worked example in Programming Experience and time yourself on it.

Deliverable: One timed worked example in Programming Experience.

Day 4 — Work Database Development

Spend the session on Database Development, which SierTeK candidates report being tested on.
Write one worked example in Database Development and time yourself on it.

Deliverable: One timed worked example in Database Development.

Day 5 — Answer out loud: Behavioral and Experience-Based Questions

Answer aloud, timed: Tell me about your previous work experience and how it prepared you for this role.
Answer aloud, timed: Can you describe a challenging technical project you worked on and how you overcame the obstacles?

Deliverable: Spoken answers to 2 reported Behavioral and Experience-Based Questions question(s), under time.

Day 6 — Answer out loud: Technical Fundamentals

Answer aloud, timed: What programming languages are you most proficient in, and why?
Answer aloud, timed: How do you approach debugging or troubleshooting a piece of code that is failing in production?

Deliverable: Spoken answers to 2 reported Technical Fundamentals question(s), under time.

Day 7 — Dry run for SierTeK

Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.