Interview guides · Planet Dds

Planet Dds Software Engineer Interview Guide

Planet Dds Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

As a Software Engineer at Planet Dds, you are at the forefront of modernizing dental practice management through innovative, AI-powered solutions. Your work directly impacts how dental professionals manage patient care, clinical workflows, and administrative efficiency. By building robust, scalable software, you contribute to a platform that serves as the backbone for thousands of practices, requiring a balance of technical precision and user-centric design. This role is critical because Planet Dds operates at the intersection of complex healthcare data and cutting-edge automation. You will be expected to tackle challenges involving system architecture, integration, and the implementation of AI tooling to drive business value.

This guide is scoped to a Software Engineer candidate at Planet Dds.

Focus areas

Technical Interviews
Take-home Projects
Conversational / Discussion-Based Technical Interviewing

The Planet Dds interview process

Planet Dds candidates report 4 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

The process begins with a review of your application to assess fit for the role.

What to demonstrate

The process begins with a review of your application to assess fit for the role
Depth in Technical Interviews

How to prepare

Be able to walk your CV end to end in two minutes, and say why this company specifically.
Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Interviews

You will engage in discussions with technical peers to evaluate your engineering expertise.

What to demonstrate

You will engage in discussions with technical peers to evaluate your engineering expertise
Depth in Technical Interviews

How to prepare

Answer aloud and timed: What is your experience with integrating third-party AI tooling into existing legacy systems?
Answer aloud and timed: How do you ensure high availability and data integrity in your software designs?

Leadership Interviews

Interviews with engineering and occasionally executive leadership to ensure a well-rounded evaluation.

What to demonstrate

Interviews with engineering and occasionally executive leadership to ensure a well-rounded evaluation
Depth in Technical Interviews

How to prepare

Answer aloud and timed: Can you explain the trade-offs between different database architectures for a high-traffic application?
Answer aloud and timed: Describe a time you had to explain a complex technical issue to a non-technical stakeholder.

Final Management Discussions

Final discussions with management to review your fit and potential contributions to the team.

What to demonstrate

Final discussions with management to review your fit and potential contributions to the team
Depth in Technical Interviews

How to prepare

Answer aloud and timed: How do you handle feedback from peers during a code review?
Answer aloud and timed: Tell us about a project where you had to pivot your strategy due to changing requirements.

Where candidates lose points

Be honest about your experience

If you are unfamiliar with a specific tool, explain how you would go about learning it rather than guessing.

Prepare your questions

Use your interviews to learn about our challenges; asking thoughtful questions about our AI implementation shows high engagement.

Focus on impact

Whether discussing a past project or a technical challenge, always tie your answer back to the value delivered to the user or the business.

Questions & practice

Collapse a redelivered event batch into per-aggregate high-water marks

Easy · hashing · at-least-once · aggregation

You drain a batch of up to 5,000,000 events, each (aggregate_id BIGINT, aggregate_version INT, event_type, payload). The log guarantees order within one aggregate only; the batch merges 64 partitions, and a relay failover has redelivered a range, so an older version for an aggregate can appear after a newer one. Given a map of last_applied_version per aggregate, produce the events worth applying, at most one per (aggregate_id, version), plus the count discarded. Target O(n) time. State the memory for 2,000,000 distinct aggregates and what you do when it does not fit.

Approach

One pass, one hash map from aggregate_id to the highest version kept, and a discard counter. An event whose version is at or below last_applied_version for its aggregate is dropped without further work, which is the whole reason the event carries its version rather than a delta. O(n) expected time, O(d) space in distinct aggregates.
Keep the maximum, never the last occurrence. The redelivered range means the final appearance of an aggregate in the batch can be an older version than one seen earlier in the same batch, so last-wins applies stale state over newer state and the projection regresses with no error anywhere.
Cost the memory instead of calling it large: an 8-byte key plus a 4-byte version is 12 bytes of payload, and an open-addressed table held at a 0.7 load factor costs roughly 17 bytes per entry before per-slot metadata, so 2,000,000 aggregates is tens of megabytes in a native layout and several times that in a runtime that boxes both key and value.
If the distinct set exceeds memory, partition on hash(aggregate_id) mod P and reduce each partition independently. Every event for one aggregate hashes to the same partition, so the per-partition result is exact and the merge is concatenation rather than a second reduction.

Follow-up

The payload is a patch rather than a snapshot, so applying only the highest version loses the intermediate changes. What changes in your reduction?
How do you detect that version 7 arrived while version 6 was never delivered, and what should the consumer do about the gap?

Canonicalise a request body into a stable idempotency fingerprint

Medium · parsing · canonicalisation · hashing

idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.

Approach

Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.

Follow-up

A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
Where does the fingerprint get computed relative to request decompression and the body-size limit?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.

Follow-up

A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?

Denormalise tenant onto revisions and backfill it live

Hard · denormalisation · online migration · backfill

resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.

Approach

Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.

Follow-up

The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
How do you verify the backfill actually finished, given rows are still being inserted while it runs?

How would you approach connecting and managing storage devices within a virtualized environment?

Medium · Technical Domain & Infrastructure

Approach

Fix the scope first: who calls this, how often, and what they do when it fails.
Name the read and write paths separately; they rarely have the same bottleneck.
Choose a partition key and say what query it makes expensive.
State the consistency you need, and where you are willing to be stale.

Follow-up

What breaks first when traffic grows ten times?
How does this behave when that dependency is down for an hour?

How do you ensure high availability and data integrity in your software designs?

Medium · Technical Domain & Infrastructure

Approach

Fix the scope first: who calls this, how often, and what they do when it fails.
Name the read and write paths separately; they rarely have the same bottleneck.
Choose a partition key and say what query it makes expensive.
State the consistency you need, and where you are willing to be stale.

Follow-up

What breaks first when traffic grows ten times?
How does this behave when that dependency is down for an hour?

Can you explain the trade-offs between different database architectures for a high-traffic application?

Medium · Technical Domain & Infrastructure

Approach

Fix the scope first: who calls this, how often, and what they do when it fails.
Name the read and write paths separately; they rarely have the same bottleneck.
Choose a partition key and say what query it makes expensive.
State the consistency you need, and where you are willing to be stale.

Follow-up

What breaks first when traffic grows ten times?
How does this behave when that dependency is down for an hour?

p99 jumped on one listing filter while p50 stayed flat

Medium · query planning · composite index · percentiles

After a release that added an owner_user_id filter to the resource listing, p99 rose from 90 ms to 1.9 s while p50 stayed at 40 ms. Traffic and row counts are unchanged. resource carries the index (tenant_id, status, updated_at DESC, resource_id DESC). The new query filters tenant_id and owner_user_id, orders by updated_at DESC, resource_id DESC, and takes 20 rows. On PostgreSQL, explain the shape of the regression, prove it from a query plan, and give the index you would add.

Approach

Start from the shape. A flat p50 with a moved p99 means a subset of requests changed cost, not all of them, so the first job is naming the subset. Bucket the endpoint's latency by the tenant's row count; the natural hypothesis is that large tenants are a small share of requests and all of the tail.
Get the plan for the new query on a large tenant with EXPLAIN (ANALYZE, BUFFERS). Expect an index scan over the tenant's range, a filter discarding most of it, then a Sort feeding the Limit, possibly reporting Sort Method: external merge Disk. Read actual rows on the scan node, not estimated.
Explain why the existing index cannot serve it. A composite B-tree is seekable only as a left prefix, and with no equality predicate on status the scan cannot treat updated_at as an ordering, because rows in the tenant's range are ordered by status first. Everything matching must be read and sorted before LIMIT 20 can apply, so a tenant with 400,000 rows pays 400,000 rows to return 20.
Add (tenant_id, owner_user_id, updated_at DESC, resource_id DESC). Equality on the first two columns leaves the index ordered by updated_at within that pair, so the plan becomes an index scan that stops after 20 rows with no Sort node. PostgreSQL can scan a B-tree backwards, so the DESC markers matter only if the two sort columns ever disagree in direction; keeping them explicit documents the order the keyset cursor depends on.

Follow-up

The endpoint paginates with OFFSET. What does page 500 cost with your index, and what does the keyset version cost?
How would you have caught this before release, given that a 10,000-row seed database produces the same plan shape at an unnoticeable cost?

Suggested practice checklist

Built from the rounds and topics Planet Dds candidates report.

Day 1 — Map the Planet Dds loop

Write out the reported sequence: Initial Screening, Technical Interviews, Leadership Interviews, Final Management Discussions.
For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 4 reported rounds, with the weakest marked.

Day 2 — Work Technical Interviews

Spend the session on Technical Interviews, which Planet Dds candidates report being tested on.
Write one worked example in Technical Interviews and time yourself on it.

Deliverable: One timed worked example in Technical Interviews.

Day 3 — Work Take-home Projects

Spend the session on Take-home Projects, which Planet Dds candidates report being tested on.
Write one worked example in Take-home Projects and time yourself on it.

Deliverable: One timed worked example in Take-home Projects.

Day 4 — Work Conversational / Discussion-Based Technical Interviewing

Spend the session on Conversational / Discussion-Based Technical Interviewing, which Planet Dds candidates report being tested on.
Write one worked example in Conversational / Discussion-Based Technical Interviewing and time yourself on it.

Deliverable: One timed worked example in Conversational / Discussion-Based Technical Interviewing.

Day 5 — Answer out loud: Technical Domain & Infrastructure

Answer aloud, timed: How would you approach connecting and managing storage devices within a virtualized environment?
Answer aloud, timed: Can you describe a time you had to optimize a piece of code for better performance?

Deliverable: Spoken answers to 2 reported Technical Domain & Infrastructure question(s), under time.

Day 6 — Answer out loud: Behavioral & Cultural Fit

Answer aloud, timed: Describe a time you had to explain a complex technical issue to a non-technical stakeholder.
Answer aloud, timed: How do you handle feedback from peers during a code review?

Deliverable: Spoken answers to 2 reported Behavioral & Cultural Fit question(s), under time.

Day 7 — Dry run for Planet Dds

Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Can you describe a time you had to optimize a piece of code for better performance?

Medium · Technical Domain & Infrastructure

Approach

Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

What is your experience with integrating third-party AI tooling into existing legacy systems?

Medium · Technical Domain & Infrastructure

Approach

Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?