cswork / libraryOpen practice workspace

Interview guides · Obsidian Solutions Group

Obsidian Solutions Group Software Engineer Interview Guide

Obsidian Solutions Group Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

A Software Engineer at Obsidian Solutions Group plays a vital role in supporting the mission-critical objectives of the U.S. Department of State and the broader defense and intelligence community. You are not just writing code; you are building technical countermeasures, research-driven software, and specialized tools that directly impact national security and the protection of personnel, property, and information. This role sits at the intersection of software development and hardware integration. You will collaborate with technicians and hardware engineers to address emerging threats, requiring a deep understanding of radio frequency systems, IoT vulnerabilities, and high-performance computing.

This guide is scoped to a Software Engineer candidate at Obsidian Solutions Group.

Focus areas

  • Software-defined radio (SDR)
  • Radio Frequency (RF) countermeasures
  • C/C++

The Obsidian Solutions Group interview process

Obsidian Solutions Group candidates report 3 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

An initial assessment to evaluate candidate qualifications and fit for the role.

What to demonstrate

  • An initial assessment to evaluate candidate qualifications and fit for the role
  • Depth in Software-defined radio (SDR)

How to prepare

  • Be able to walk your CV end to end in two minutes, and say why this company specifically.
  • Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Interviews

One or more rounds of interviews focused on practical problem-solving skills conducted by senior engineering staff.

What to demonstrate

  • One or more rounds of interviews focused on practical problem-solving skills conducted by senior engineering staff
  • Depth in Software-defined radio (SDR)

How to prepare

  • Answer aloud and timed: What is your process for integrating software with hardware platforms like Raspberry Pi or Arduino?
  • Answer aloud and timed: How do you approach debugging and securing software defined radio systems?

Security Clearance Discussion

Discussions regarding the candidate's ability to obtain and maintain necessary security clearances.

What to demonstrate

  • Discussions regarding the candidate's ability to obtain and maintain necessary security clearances
  • Depth in Software-defined radio (SDR)

How to prepare

  • Answer aloud and timed: Explain your experience with computer graphic APIs like OpenGL in the context of system visualization or data analysis.
  • Answer aloud and timed: Walk us through a time you had to research an emerging technology and propose a solution to mitigate a potential vulnerability.

Where candidates lose points

Structure your answers

Use the STAR method (Situation, Task, Action, Result) to keep your behavioral answers concise and impactful.

Highlight your security mindset

Whenever discussing a project, mention how you considered the security implications of your code or design.

Be clear about your hardware experience

Even if your background is primarily software, emphasize any projects that involved hardware integration, as this is a key differentiator.

Focus on the mission

Understand the mission of the Bureau of Diplomatic Security; demonstrating that you care about the "why" behind your code will make you stand out.

Questions & practice

Canonicalise a request body into a stable idempotency fingerprint

Medium · parsing · canonicalisation · hashing

idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.

Approach

  1. Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
  2. Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
  3. Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
  4. Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.

Follow-up

  • A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
  • Where does the fingerprint get computed relative to request decompression and the body-size limit?

Merge partitioned event streams into one ordered feed with bounded lateness

Hard · k-way merge · watermarks · out-of-order streams

The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.

Approach

  1. Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
  2. Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
  3. Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
  4. Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.

Follow-up

  • The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
  • The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?

Diff a projection against the primary without per-row point reads

Hard · reconciliation · range hashing · throttling

The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.

Approach

  1. Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
  2. Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
  3. For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
  4. Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.

Follow-up

  • The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
  • Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?

Stop tag and share joins from fanning out a page

Medium · join fan-out · semi-joins · many-to-many

resource_tag is (resource_id, tag_id) with PK (resource_id, tag_id); resource_share is (resource_id, shared_with_user_id, permission). The tagged-and-shared listing inner-joins resource to both, filters tenant_id, tag_id = ANY($2) and shared_with_user_id = $3, orders by updated_at DESC and takes 50. Pages come back with fewer than 50 distinct resources and the total in the header is far too high. Explain the row multiplication, rewrite both the page query and the count query so each is correct, and name the index each one needs. PostgreSQL 16.

Approach

  1. Do the arithmetic against the predicates that are actually there. An inner join emits one row per matching child row, and both joins are filtered: tag_id = ANY($2) admits only the requested tags, shared_with_user_id = $3 admits one user's share rows. So a resource holding three of the requested tags and shared with $3 once yields three rows, not one — the multiplier is its count of matching tags times its share rows for that single user, and that second factor is 1 unless the table admits duplicate (resource_id, shared_with_user_id) pairs. LIMIT 50 then limits rows rather than resources, and COUNT(*) counts pairs — the header is the product, not the population.
  2. Reject DISTINCT as the fix. It deduplicates after the product has been built, so the planner must materialise and sort the fanned-out set before the LIMIT can apply, and it leaves any SUM or AVG in the same select list wrong.
  3. Rewrite both filters as semi-joins, keeping resource as the only row source: AND EXISTS (SELECT 1 FROM resource_tag rt WHERE rt.resource_id = r.resource_id AND rt.tag_id = ANY($2)) and the same shape against resource_share. A semi-join stops at the first match per resource and preserves the driving index order, so ORDER BY updated_at DESC, resource_id DESC LIMIT 50 still stops after 50 rows.
  4. Count with the same predicates and no join at all: SELECT count(*) FROM resource r WHERE r.tenant_id = $1 AND r.status = 'active' AND EXISTS (...) AND EXISTS (...). Nothing multiplies a resource, so the number is the population.

Follow-up

  • The filter changes from 'any of these tags' to 'all of these tags'. Rewrite it and state what it costs relative to the ANY form.
  • A resource can be shared with the same user twice under different permissions. Does your count change, and should it?

Denormalise tenant onto revisions and backfill it live

Hard · denormalisation · online migration · backfill

resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.

Approach

  1. Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
  2. Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
  3. Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
  4. Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.

Follow-up

  • The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
  • How do you verify the backfill actually finished, given rows are still being inserted while it runs?

How have you utilized C/C++ or Python to solve complex, low-level system problems?

Medium · Technical Proficiency and Domain Knowled

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

What is your process for integrating software with hardware platforms like Raspberry Pi or Arduino?

Medium · Technical Proficiency and Domain Knowled

Approach

  1. Say who the caller is and what they do when the call fails halfway.
  2. Define the identity of a request so a retry cannot double-apply it.
  3. Separate accepted, pending, failed and confirmed; they are different facts.
  4. Design the error taxonomy before the success shape; callers branch on it.

Follow-up

  • What happens if the caller retries after a timeout?
  • How does a client discover it is on an old version of this contract?

Walk us through a time you had to research an emerging technology and propose a solution to mitigate a potenti

Medium · Problem-Solving and System Design

Walk us through a time you had to research an emerging technology and propose a solution to mitigate a potential vulnerability.

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

How do you prioritize tasks when working on multiple projects with tight deadlines in a fast-paced environment

Medium · Problem-Solving and System Design

How do you prioritize tasks when working on multiple projects with tight deadlines in a fast-paced environment?

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

Describe a situation where you had to bridge the gap between hardware requirements and software capabilities.

Medium · Problem-Solving and System Design

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

How do you stay current with evolving IoT trends and security threats?

Medium · Problem-Solving and System Design

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

How do you approach debugging and securing software defined radio systems?

Medium · Technical Proficiency and Domain Knowled

Approach

  1. Establish what changed and when, before forming any theory.
  2. Pick a bisection that eliminates candidates whichever way it turns out.
  3. Check the instrumentation before believing the symptom.
  4. Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

  • What would you look at first, and what would it rule out?
  • How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the rounds and topics Obsidian Solutions Group candidates report.

Day 1 — Map the Obsidian Solutions Group loop

  • Write out the reported sequence: Initial Screening, Technical Interviews, Security Clearance Discussion.
  • For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 3 reported rounds, with the weakest marked.

Day 2 — Work Software-defined radio (SDR)

  • Spend the session on Software-defined radio (SDR), which Obsidian Solutions Group candidates report being tested on.
  • Write one worked example in Software-defined radio (SDR) and time yourself on it.

Deliverable: One timed worked example in Software-defined radio (SDR).

Day 3 — Work Radio Frequency (RF) countermeasures

  • Spend the session on Radio Frequency (RF) countermeasures, which Obsidian Solutions Group candidates report being tested on.
  • Write one worked example in Radio Frequency (RF) countermeasures and time yourself on it.

Deliverable: One timed worked example in Radio Frequency (RF) countermeasures.

Day 4 — Work C/C++

  • Spend the session on C/C++, which Obsidian Solutions Group candidates report being tested on.
  • Write one worked example in C/C++ and time yourself on it.

Deliverable: One timed worked example in C/C++.

Day 5 — Answer out loud: Technical Proficiency and Domain Knowledge

  • Answer aloud, timed: How have you utilized C/C++ or Python to solve complex, low-level system problems?
  • Answer aloud, timed: Describe your experience with Linux-based software development and how you optimize performance in those environments.

Deliverable: Spoken answers to 2 reported Technical Proficiency and Domain Knowledge question(s), under time.

Day 6 — Answer out loud: Problem-Solving and System Design

  • Answer aloud, timed: Walk us through a time you had to research an emerging technology and propose a solution to mitigate a potential vulnerability.
  • Answer aloud, timed: How do you prioritize tasks when working on multiple projects with tight deadlines in a fast-paced environment?

Deliverable: Spoken answers to 2 reported Problem-Solving and System Design question(s), under time.

Day 7 — Answer out loud: Behavioral and Collaborative Skills

  • Answer aloud, timed: Tell us about a time you collaborated with field users to refine a software solution.
  • Answer aloud, timed: How do you handle feedback from hardware engineers or technicians when your proposed software design faces constraints?

Deliverable: Spoken answers to 2 reported Behavioral and Collaborative Skills question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Describe your experience with Linux-based software development and how you optimize performance in those envir

Medium · Technical Proficiency and Domain Knowled

Describe your experience with Linux-based software development and how you optimize performance in those environments.

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Explain your experience with computer graphic APIs like OpenGL in the context of system visualization or data

Medium · Technical Proficiency and Domain Knowled

Explain your experience with computer graphic APIs like OpenGL in the context of system visualization or data analysis.

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Tell us about a time you collaborated with field users to refine a software solution.

Medium · Behavioral and Collaborative Skills

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you handle feedback from hardware engineers or technicians when your proposed software design faces con

Medium · Behavioral and Collaborative Skills

How do you handle feedback from hardware engineers or technicians when your proposed software design faces constraints?

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Describe your approach to working independently while remaining aligned with a larger team's mission objective

Medium · Behavioral and Collaborative Skills

Describe your approach to working independently while remaining aligned with a larger team's mission objectives.

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?