Madison Energy Infrastructure Software Engineer Interview Guide

The 60-second brief

A Software Engineer (specifically in a Performance Engineer capacity) at Madison Energy Infrastructure is a critical technical role focused on ensuring the scalability, reliability, and efficiency of our energy management systems. You will be responsible for optimizing complex software architectures that underpin our infrastructure, ensuring that our platforms can handle the high-throughput demands of the modern energy sector. Your work directly impacts the stability of our operational technology, directly influencing how we monitor and manage energy distribution. This role is not just about writing code; it is about architectural precision, identifying bottlenecks, and implementing performance-driven solutions that allow our systems to remain performant under heavy load. You will be a key contributor to the technical excellence that defines Madison Energy Infrastructure.

This guide is scoped to a Software Engineer candidate at Madison Energy Infrastructure.

Focus areas

• Performance Engineering
• Application Performance Tuning
• Profiling and Benchmarking

The Madison Energy Infrastructure interview process

Madison Energy Infrastructure candidates report 2 rounds over 2-4 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

Gauge your background and fit for the role.

What to demonstrate

• Gauge your background and fit for the role
• Depth in Performance Engineering

How to prepare

• Be able to walk your CV end to end in two minutes, and say why this company specifically.
• Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Deep Dives

Engage in coding, system design, and performance-specific case studies.

What to demonstrate

• Engage in coding, system design, and performance-specific case studies
• Depth in Performance Engineering

How to prepare

• Answer aloud and timed: How do you approach profiling a system that is experiencing intermittent latency spikes?
• Answer aloud and timed: What metrics do you prioritize when monitoring the health of a distributed system?

Where candidates lose points

Prepare your stories

Use the STAR method (Situation, Task, Action, Result) to frame your behavioral answers, ensuring you highlight your personal contribution to performance wins.

Focus on trade-offs

In every architectural discussion, always mention the trade-offs of your proposed solution. There is rarely a "perfect" answer, only the best one for the current constraints.

Ask questions

At the end of every interview, ask thoughtful questions about the team's current performance challenges or the technical stack. This shows genuine interest and maturity.

Be honest about gaps

If you don't know the answer to a specific technical question, explain how you would go about finding the answer. We value problem-solving instincts over rote memorization.

Questions & practice

How do you identify a memory leak in a high-concurrency application?

Medium · Technical and Performance Engineering

Approach

1. Say what the runtime actually does before reasoning about the code.
2. Name what is shared across threads and what owns each piece of state.
3. Identify the window where an invariant is briefly untrue.
4. Distinguish a value from a reference to it, and say which one you handed out.

Follow-up

• What happens if two callers reach this at the same time?
• Where could this allocate more than you expect?

Explain the trade-offs between vertical and horizontal scaling in an energy infrastructure context.

Medium · Technical and Performance Engineering

Approach

1. Say what the runtime actually does before reasoning about the code.
2. Name what is shared across threads and what owns each piece of state.
3. Identify the window where an invariant is briefly untrue.
4. Distinguish a value from a reference to it, and say which one you handed out.

Follow-up

• What happens if two callers reach this at the same time?
• Where could this allocate more than you expect?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

1. Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
2. Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
3. State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
4. Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

• The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
• A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

1. One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
2. Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
3. State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
4. Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.

Follow-up

• A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
• Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?

Replace offset paging on the resource feed with keyset

Easy · keyset pagination · composite index · sort order

resource holds resource_id, tenant_id, owner_user_id, title, body_ref, version, status ('draft','active','archived','deleted'), created_at, updated_at, deleted_at, with an index on (tenant_id, status, updated_at DESC, resource_id DESC). The listing endpoint returns active resources for one tenant, newest update first, 50 per page, today with LIMIT 50 OFFSET n. Tenants reach page 400 and rows are created while they read. Write the keyset query, define what the cursor carries and how it is encoded, and say which part of the index each predicate uses. Assume PostgreSQL 16.

Approach

1. Name the two failures separately. OFFSET 20000 makes the server produce and discard 20,000 rows, so page cost grows with depth rather than with page size. Independently, any write that changes how many rows sort above the offset moves the window between two fetches, and the direction decides which anomaly you get: an insert lands at the head of updated_at DESC and pushes already-returned rows down past the boundary, so they are returned a second time; a delete above the offset, or a row whose updated_at is bumped above the cursor, pulls rows up and one is never returned at all. Nothing in the response reveals either.
2. Write the seek: WHERE tenant_id = $1 AND status = 'active' AND (updated_at, resource_id) < ($2, $3) ORDER BY updated_at DESC, resource_id DESC LIMIT 50. The row-value comparison is one index range rather than a disjunction, and both columns are NOT NULL, which is what makes that comparison well defined.
3. Map each predicate onto the index: tenant_id and status are equality on the leading columns, (updated_at, resource_id) is the range, and the ORDER BY matches the index order so no Sort node appears and the scan stops after 50 rows. The DESC in the definition only matters for mixed directions — a plain ascending btree on the same columns is read backwards for this query.
4. Put both sort columns in the cursor and nothing the client can tamper with into another tenant: base64 of (updated_at, resource_id), validated server-side, with tenant_id taken from the principal.

Follow-up

• The client asks for 'jump to page 400'. What do you offer instead, and what does the honest version cost?
• Sort order becomes user-selectable across four columns. How many indexes is that, and which would you refuse to add?

What metrics do you prioritize when monitoring the health of a distributed system?

Medium · Technical and Performance Engineering

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

Describe your process for optimizing a slow-running SQL query or API endpoint.

Medium · Technical and Performance Engineering

Approach

1. Say who the caller is and what they do when the call fails halfway.
2. Define the identity of a request so a retry cannot double-apply it.
3. Separate accepted, pending, failed and confirmed; they are different facts.
4. Design the error taxonomy before the success shape; callers branch on it.

Follow-up

• What happens if the caller retries after a timeout?
• How does a client discover it is on an old version of this contract?

How would you design a data ingestion pipeline for real-time energy sensor data?

Medium · System Design and Architecture

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

Explain your strategy for ensuring high availability in a system with multiple dependencies.

Medium · System Design and Architecture

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

How do you design for fault tolerance in a distributed environment?

Medium · System Design and Architecture

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

What are the considerations for data consistency versus availability in a system like ours?

Medium · System Design and Architecture

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

How do you approach profiling a system that is experiencing intermittent latency spikes?

Medium · Technical and Performance Engineering

Approach

1. Establish what changed and when, before forming any theory.
2. Pick a bisection that eliminates candidates whichever way it turns out.
3. Check the instrumentation before believing the symptom.
4. Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

• What would you look at first, and what would it rule out?
• How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the rounds and topics Madison Energy Infrastructure candidates report.

Day 1 — Map the Madison Energy Infrastructure loop

• Write out the reported sequence: Initial Screening, Technical Deep Dives.
• For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 2 reported rounds, with the weakest marked.

Day 2 — Work Performance Engineering

• Spend the session on Performance Engineering, which Madison Energy Infrastructure candidates report being tested on.
• Write one worked example in Performance Engineering and time yourself on it.

Deliverable: One timed worked example in Performance Engineering.

Day 3 — Work Application Performance Tuning

• Spend the session on Application Performance Tuning, which Madison Energy Infrastructure candidates report being tested on.
• Write one worked example in Application Performance Tuning and time yourself on it.

Deliverable: One timed worked example in Application Performance Tuning.

Day 4 — Work Profiling and Benchmarking

• Spend the session on Profiling and Benchmarking, which Madison Energy Infrastructure candidates report being tested on.
• Write one worked example in Profiling and Benchmarking and time yourself on it.

Deliverable: One timed worked example in Profiling and Benchmarking.

Day 5 — Answer out loud: Technical and Performance Engineering

• Answer aloud, timed: How do you identify a memory leak in a high-concurrency application?
• Answer aloud, timed: Explain the trade-offs between vertical and horizontal scaling in an energy infrastructure context.

Deliverable: Spoken answers to 2 reported Technical and Performance Engineering question(s), under time.

Day 6 — Answer out loud: System Design and Architecture

• Answer aloud, timed: How would you design a data ingestion pipeline for real-time energy sensor data?
• Answer aloud, timed: Explain your strategy for ensuring high availability in a system with multiple dependencies.

Deliverable: Spoken answers to 2 reported System Design and Architecture question(s), under time.

Day 7 — Answer out loud: Behavioral and Problem-Solving

• Answer aloud, timed: Tell me about a time you had to explain a complex technical performance issue to a non-technical stakeholder.
• Answer aloud, timed: Describe a situation where you had to make a trade-off between speed of delivery and technical performance.

Deliverable: Spoken answers to 2 reported Behavioral and Problem-Solving question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Tell me about a time you had to explain a complex technical performance issue to a non-technical stakeholder.

Medium · Behavioral and Problem-Solving

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Describe a situation where you had to make a trade-off between speed of delivery and technical performance.

Medium · Behavioral and Problem-Solving

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

How do you handle disagreements on architectural direction with your peers?

Medium · Behavioral and Problem-Solving

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?