Interview guides · JPL/NASA

JPL/NASA Software Engineer Interview Guide

Code reading practice for JPL/NASA software engineer prep: work out what unfamiliar code does before judging it.

The 60-second brief

A Software Engineer at the Jet Propulsion Laboratory (JPL) plays a critical role in the exploration of space, contributing to missions that expand human knowledge of the universe. Unlike typical commercial software roles, engineering at JPL/NASA requires developing software that must operate under extreme environmental constraints, with zero tolerance for failure. Whether you are writing embedded flight software for Mars rovers, architecting cloud-based ground data systems to ingest petabytes of telemetry, or building modeling tools for deep-space missions, your code will directly impact the success of active space exploration.

Treat capacity estimation as a conversion skill rather than a table to memorise: turn a user count and an action rate into requests per second and bytes per day, then name the component that number breaks first. The figure only matters if it changes the design.

Focus areas

Bound blast radius with per-tenant concurrency limits
Scope every query and cache key by tenant
Make every write idempotent under client retries

Overview

The engineering challenges at JPL/NASA span multiple domains, meaning that software is highly integrated with hardware, systems engineering, and scientific instruments. Engineers here operate at the intersection of cutting-edge technology and rigorous physical sciences. The systems you build will serve scientists, mission operators, and the global research community, making the role highly collaborative, intellectually demanding, and strategically vital to national and international space endeavors.

To succeed as a Software Engineer at JPL/NASA, you must possess not only technical excellence but also a deep curiosity and a commitment to precision. The laboratory values engineers who can think from first principles, adapt to ambiguous and unprecedented challenges, and maintain a rigorous standard of quality. This guide outlines the exact expectations, interview structures, and evaluation criteria you will encounter during the hiring process.

The JPL/NASA interview process

JPL/NASA candidates report 4 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Resume Review

Half of this call is the part candidates treat as small talk: start date, notice period, work authorisation and its timing, location and time zone, on-call, and the number. Those are what kill offers late, after several engineers have each spent a day. Surfacing a hard constraint now costs you nothing and occasionally buys you something, since a loop compressed to fit a competing deadline can usually only be arranged if it is asked for early. The common failure is deflecting the compensation question twice, then discovering at offer stage that the band never reached your number.

What to demonstrate

Whether your hard constraints are compatible with the role before a loop gets booked: earliest start, notice period, what authorisation you hold and when it needs action, days on site, willingness to carry a pager
Whether you give a compensation range with something behind it, such as current total compensation or a competing timeline, rather than leaving the band untested
Whether your stated timeline is real, since a competing deadline raised now is something scheduling can sometimes work around and the same deadline raised at offer stage usually is not

How to prepare

Write each constraint down in one line before the call and state them as facts rather than negotiating them live under a question you were not expecting
Set your range from two or three current data points for that level and location, and name the structure you are quoting in, so the number is comparable to the one they are holding
If another process is running, say where it stands and by when, and ask directly whether this loop can be scheduled inside that window

Preliminary Screening

You cannot drill a format you do not know, so put the preparation into material that travels. Three pieces of your own work, each rehearsed until you can take a follow-up you did not anticipate, will carry a conversation or a code walkthrough equally well. Specificity is what separates that from filler. A number needs its definition before it means anything: a p99 is over some window and measured at some hop, and a server-side figure excludes the queueing and network time a client would see. The number you cannot qualify is the one to leave out.

What to demonstrate

Whether your examples carry detail only someone who did the work would hold, such as what the binding constraint actually was, which alternative you rejected and why it was worse, and what you measured on each side of the change
Whether a number survives one follow-up, meaning you can say what it was measured over and whether it moved because of your change or merely alongside it
Whether a failure is described with the specific change that followed it, rather than a lesson stated in general terms
Whether your part in a team effort is stated accurately, including what other people did

How to prepare

Write a page on each of three projects covering the constraint, the option you rejected, the measurement before and after, and what went wrong. Cut any line you cannot take a follow-up on, since you are writing the parts you will be pressed on rather than a summary.
Recover the real figures while you still have access: request volume, data size, latency with its percentile and window, team size, timeline. Note where each came from, whether a dashboard, a design document or memory, and mark the estimates so you can say which they are out loud.
Take your weakest project story to someone who works in a different area and have them ask why four times in succession. The point where you run out of answer is the part to go and re-read before the round.

Technical Evaluation

The same problem is scored by two different mechanisms depending on the format, and preparing for one does not cover the other. With a person watching, partial progress is visible and a hint is a correction you can absorb; silence is the expensive failure, because nobody can read a half-written function. With an automated grader there is no partial credit for what you were about to do, nobody to ask, and the worked examples in the prompt are the entire specification. Read them as a contract, down to whether an empty result should be an empty list or no output at all.

What to demonstrate

In a live session, whether your commentary tracks what your hands are doing, and whether a hint redirects you or gets defended against
In an automated one, whether you cover the cases the examples do not show, since the hidden cases are where the score moves
Whether you manage the clock on purpose: abandoning an approach that is not converging while there is still time to write something simpler that finishes

How to prepare

Have someone hand you a problem and feed you one deliberately wrong hint. Practise testing it against a concrete case instead of accepting or rejecting it on authority.
Do one timed run a week in a plain browser editor with autocomplete, linting and your own snippets switched off, which is closer to what these environments give you
For the automated format, write the harness before the solution: a main that feeds the worked examples plus an empty and a single-element case and prints expected against actual, so a wrong submission is caught by you first

Panel Interview

Where the day includes a partner from product, design or data, that conversation is weighted like the technical ones and prepared for least. They are deciding one thing: whether having you in the room makes their decisions cheaper. That means options with costs attached, not implementation detail and not "it depends". An estimate someone can plan against — a range, the assumption that would push it to the high end, and what you would drop to hit the low one — is worth more than a confident single number, which everyone present already knows is wrong.

What to demonstrate

Whether an estimate comes as a range with the assumption most likely to break it, and states what a specific scope cut would actually buy
Whether a technical constraint is handed over as a choice with consequences on their side, rather than as a verdict they have no standing to argue with
Whether you establish what decision is on the table before proposing anything
Whether risk is raised while it can still change the plan, with the trigger that would confirm it, instead of reported afterwards as a slip

How to prepare

Take a project that shipped late and write the two-sentence warning you could have given three weeks earlier, naming what you would have needed decided at that point
Rehearse one estimate out loud until it arrives in three parts: the range, the single assumption that would blow it, and the smallest thing you would cut to protect the date
Rewrite an objection you have actually made — the "we can't do that" version — as two options with their costs, so the choice ends up with the person who owns it

Where candidates lose points

Holding money in a floating-point type, or rounding it more than once

Binary floating point cannot represent 0.01 or 0.1 exactly, so sums drift and two code paths that should agree disagree by cents nobody can trace back. The fix is integer minor units or an exact decimal type end to end, with sub-cent rates expressed as scaled integers such as micro-units, because a per-request price genuinely is smaller than a cent. The second half of the trap is rounding position: rounding each line and then summing gives a different total from summing and rounding once, and half-up and half-even diverge systematically across many lines, so rounding must happen at one named place and every downstream reader must carry the rounded value rather than recompute it from quantity and rate.

Treating a timed-out write as a failed write

A timeout says the response did not arrive, not that the work did not happen; the server may well have committed and then lost the connection. Retrying a non-idempotent create after a timeout is the standard way to end up with two of something, and those duplicates land precisely when the system is already degraded and least able to absorb them. The discipline is to treat a timeout as unknown: either the write carries an idempotency key so the retry is safe by construction, or the client re-reads authoritative state before deciding what to do, and the interface says unknown rather than showing a failure that invites a second click.

A cache with no invalidation story

Say how an entry goes stale, how long you can serve it stale, and what happens when many requests miss the same key at the same instant. One popular key expiring under load sends every concurrent request to the origin together; single-flight coalescing, jittered expiry, or serving stale while revalidating are the standard answers.

Issuing one query per row of a result set

Fetch related rows in a single batched query keyed by the ids you already hold, or join them into the original query. A per-row round trip multiplies network latency by the row count, and it looks perfectly fine against the ten rows in your development database.

Questions & practice

Locate a billing reconciliation gap without rescanning ninety million events

Hard · reconciliation · dimensional-bisection · watermarks · hypothesis-testing

A tenant's sealed invoice total is 0.4% below the sum of its raw usage_event rows for the period. That tenant has 90 million events over 30 days in a table partitioned daily on ingested_at, and its rollups carry source_max_ingested_at, revision and sealed_at. Recomputing all 30 days from raw is correct, and you are not going to do it. Give the procedure that locates the divergent (workspace, sku, hour) cell, the cost of each probe, and the one query you run before any of it.

Approach

Run the free query first. Sum raw quantity for the period restricted to ingested_at <= source_max_ingested_at of the sealed rollups, and compare that against the unrestricted sum. The rollup stores the watermark precisely so this can be answered without a scan. If the whole 0.4% sits above the watermark, nothing is broken: it is late data, it becomes an adjustment line, and the investigation ends in one query.
Only if the gap survives that test do you bisect, and you bisect by dimension rather than by rows. Compare 30 per-day totals, then inside the offending day compare the 6 SKUs, then the workspaces, then the 24 hours. That is roughly 30 + 6 + W + 24 grouped probes, each an indexed range scan over one daily partition for one tenant, against O(N) per attempt for the naive re-fold.
Quantify why naive is not merely slow but unusable mid-incident: at a generous 200,000 rows/second sequential, 90 million rows is about 7.5 minutes per attempt, you will want ten attempts, and every one competes for I/O on the same partitions live ingest is writing. The diagnostic worsens the backlog it is diagnosing.
Before fetching each comparison, state what it would look like under each hypothesis. Two adjacent hours off by equal and opposite amounts is occurred_at versus ingested_at bucketing. A whole day offset by exactly N hours is a timezone applied at the wrong layer. A gap confined to one SKU in one workspace is an environment filter. The same (tenant_id, idempotency_key) present in two ingested_day partitions is the dedup horizon losing a retry that crossed midnight.
Make the next bisection cheap by storing the aggregate you keep recomputing. A per-(tenant_id, ingested_day) count and quantity checksum turns step two from thirty probes into one read, and it is the same number the reconciliation job already produces.
Whatever you find, the sealed period does not change value. The correction is an adjustment line pointing at the line it reverses, carrying its own source_rollup_watermark, because the original invoice is the evidence of what the customer was charged.

Follow-up

The gap is 0.4% in one direction on one day and 0.4% the other way the next day. What does that shape rule in, and what does it rule out?
How do you distinguish a duplicate from a restatement, given revision and recomputed_at on the rollup?
Ingest is still running while you investigate. What makes your two numbers comparable at all?

Parse and verify a timestamped multi-signature webhook header

Easy · parsing · hmac · constant-time-compare · replay-protection

An inbound webhook carries a signature header of at most 1 KiB shaped t=<unix seconds>,v1=<64 hex chars>, with up to five v1 values during secret rotation and possibly unknown scheme keys. You hold the raw request body bytes and the currently active signing secrets. Write the parser and the verifier: accept when any active secret reproduces a signature and the timestamp is within a five-minute tolerance in either direction, reject otherwise. Single left-to-right pass over the header, no regular expression. State what is inside the MAC and why.

Approach

Parse in one scan: split on ,, then on the first = only, since a value may itself contain = under a future scheme. Accept t exactly once and treat a second t as a reject rather than last-wins. Push every v1 onto a short list and ignore any other key, so a v2 can be introduced later without breaking this verifier.
Say what is signed: HMAC-SHA256 over the exact byte string <t>.<raw body bytes>, yielding 32 bytes or 64 hex characters. The timestamp sits inside the MAC because otherwise an attacker replays yesterday's body with its still-valid signature and only has to edit the header timestamp.
Hash the bytes as received. Verifying against a re-serialised JSON body is the usual defect: key order, whitespace and number formatting all change the bytes while the parsed objects compare equal, so signatures fail for honest senders and the popular 'fix' is to stop checking.
Compare in constant time over fixed-length digests. Decode the hex to 32 bytes, accumulate acc |= a[i] ^ b[i] across the whole length, and test acc == 0 at the end. Evaluate every candidate without an early exit; at five candidates that is five HMACs over the body, linear in body size and negligible beside the network.
Apply the tolerance as a two-sided bound, rejecting when |now - t| > 300 seconds. A sender whose clock runs ahead of yours is an ordinary case, and an unbounded future timestamp is a free replay window.
Complexity: O(L) over the header producing k candidates, plus k HMACs at O(|body|) each. Space is O(k) beyond the body itself. Do the cheap rejections, including the tolerance check, before any cryptography runs.

Worked solution (15 min)

Write the grammar on one line before coding: header := field (',' field)*, field := key '=' value, split on the first = only.
Implement the parser to return {t: int, v1: [hex, ...]}, rejecting a missing t, a duplicate t, any v1 that is not 64 hex characters, and a header over 1 KiB, all before any cryptography runs.
Implement the verifier: for each active secret compute HMAC-SHA256(secret, f'{t}.'.encode() + raw_body), compare it in constant time against each parsed v1, and OR the results with no early exit.
Test with a valid signature; the same body with t moved 400 seconds into the past; the same body with t 400 seconds into the future; a header carrying an unknown v2= alongside a valid v1; and a body re-serialised with different JSON key order.

Expected result: The valid case accepts. Both out-of-tolerance cases reject, including the future one. The unknown v2 field is ignored and the v1 still verifies. The re-serialised body fails, which is correct and is exactly why the raw bytes must be retained.

Verify it yourself

Timing the comparison over 10,000 mismatching signatures that differ at the first character versus the last shows no separation you can measure.
Removing t from the MAC input makes an old captured body with its original signature pass. Write that test, watch it pass, then put t back.
Every rejection except the signature mismatch itself returns before an HMAC is computed.

Follow-up

The body is 40 MB. What changes about where you verify, and what can you do before the whole body has arrived?
A customer reports that signatures fail for exactly the requests whose body contains a non-ASCII character. What is your first hypothesis?
How do you rotate the signing secret with no failed deliveries, and how long do both secrets stay live?

Find peak concurrent sandbox usage from run intervals

Medium · sweep-line · intervals · concurrency-caps · null-semantics

Given up to 5 million job_run rows for one tenant over one day, with run_id, started_at, finished_at, status and wall_clock_limit_seconds, report the maximum number of sandboxes running at once, the earliest instant that maximum is reached, and the first run_id that would breach a per-tenant cap of C. started_at is null while a run is queued; finished_at is null both for runs still executing and for runs in status lost. Treat a run as occupying [started_at, finished_at). Give the complexity and state how you handle each null.

Approach

Turn each run into two sweep events, (started_at, +1) and (end, -1), then sort the 2n events by timestamp with -1 ordered before +1 at equal timestamps. That tie-break is what makes the interval half-open, so a run finishing at 10:00:00 and one starting at 10:00:00 never overlap.
Decide each null out loud before sweeping, because each choice moves the answer. A null started_at means queued and contributes nothing. A null finished_at with status running or leased is clipped to the window end. Status lost has no observed end at all, so clip it at started_at + wall_clock_limit_seconds on the grounds that the supervisor owns the timeout, and record that you did. The table's check (finished_at is null or started_at is not null) guarantees you never see an end without a start.
Sweep once, maintaining a running counter, the maximum, and the timestamp at which the maximum was first attained (update peak_at only on a strict increase, or you will report the last such instant instead of the earliest). Capture the first run_id whose +1 takes the counter to C+1 during the same sweep rather than in a second pass.
Complexity: O(n log n) dominated by the sort, O(n) space. If rows already arrive ordered by started_at, a min-heap of end times gives O(n log k) time and O(k) space with k the peak concurrency, which is the better shape when the rows come from an index scan on (tenant_id, started_at).
If second resolution is acceptable, counting-sort the endpoints into an 86,400-slot delta array and prefix-sum it: O(n + T) time and O(T) space, which beats the comparison sort at 5 million rows. It answers only at second granularity, so state which resolution the cap is defined in.

Follow-up

Now report peak concurrency per tenant for 10,000 tenants from one globally sorted stream. What changes about memory and about the sort?
The cap has to be enforced at dispatch rather than reported afterwards. What does the admission check look like, and where does it race?
How would you answer 'peak concurrency within any 5-minute window' without re-sorting?

Migrate a live partitioned event table without blocking ingest

Hard · online migration · ddl locks · expand and contract · partitioning

usage_event is range-partitioned daily on ingested_at, holds roughly 250M rows per day across 400 live partitions, and is written at 10-40k rows/second. Two changes are required: quantity must move from double precision to numeric(20,6), and a new environment column must become NOT NULL with a default of 'production'. Ingest cannot stop. Give the ordered plan, naming for each step the lock it takes, what that lock blocks, and roughly how long it is held. Identify the one step that cannot be rolled back cleanly once traffic depends on it.

Approach

Classify the two changes before planning anything. Adding a column with a non-volatile default has been metadata-only since PostgreSQL 11, so it is cheap. Changing double precision to numeric is not binary-coercible, so alter column ... type rewrites every partition under ACCESS EXCLUSIVE and rebuilds its indexes; on this volume that is hours of blocked ingest and is simply not an option, which is why the plan is expand-and-contract rather than one statement.
Expand: add quantity_numeric numeric(20,6) and environment with its default on the parent. Both are catalogue-only but both take a brief ACCESS EXCLUSIVE that cascades to partitions, so run each with lock_timeout set to a second or two and retry on failure. A queued ACCESS EXCLUSIVE request blocks every reader behind it, which is how a metadata-only change turns into an outage.
Dual-write: deploy producer code that populates both columns on every insert, and leave it running before anything reads the new column. This is the step that cannot be reverted cleanly. Once readers depend on quantity_numeric, reverting the writer leaves rows with a null there, and the gap is only discoverable by re-reading the old column, which the readers have stopped doing.
Backfill older partitions in batches keyed on the primary key, oldest first, committing every few thousand rows with a pause between batches, and skipping the partition still receiving writes until it rotates. Each batch is an ordinary UPDATE taking row locks only. The cost is bloat and WAL rather than blocking, so watch dead tuples and let autovacuum keep pace instead of wrapping 400 partitions in one transaction.
Make NOT NULL cheap with the three-step form: add constraint ... check (environment is not null) not valid (brief ACCESS EXCLUSIVE, no scan), then validate constraint (SHARE UPDATE EXCLUSIVE, scans while reads and writes continue), then set not null, which from PostgreSQL 12 uses the validated check and skips its own full scan. Do this per partition, then on the parent.
Switch and contract: move reads to the new column behind a flag, verify over a full period that both columns agree on freshly written rows, drop the old column (metadata-only), and only then remove the dual-write. Any index on the new column goes on with CREATE INDEX CONCURRENTLY per partition, since CIC is not supported on a partitioned parent: create the parent index with ONLY, build each child concurrently, then ALTER INDEX ... ATTACH PARTITION until the parent index becomes valid.

Follow-up

A CREATE INDEX CONCURRENTLY fails halfway through the partition list. What state is the table in, how do you detect it, and what do you run?
The producer computes quantity itself. What happens to a request already in flight when the dual-write deploy lands, and does it matter?
Give two queries that prove the backfill is complete: one cheap enough to run every minute, one authoritative.

Explain why the metering dashboard scans every daily partition

Medium · indexing · partition pruning · sargability · tenant skew

usage_event is range-partitioned daily on ingested_at and holds tenant_id, workspace_id, environment, sku, quantity numeric(20,6), occurred_at and ingested_at. The only relevant index is on (occurred_at). A dashboard runs select sku, sum(quantity) from usage_event where tenant_id = $1 and date_trunc('hour', occurred_at) >= $2 and environment = 'production' group by sku, and EXPLAIN shows a sequential scan of every partition. Give each distinct reason, rewrite the predicate so an index can serve it, propose the index, and state the write cost its column order adds.

Approach

Separate the three causes rather than blaming one. First, date_trunc('hour', occurred_at) wraps the column, so the predicate is not sargable against a btree on the bare column. Second, pruning keys off ingested_at while the query constrains occurred_at, so no partition can be excluded. Third, even made sargable, (occurred_at) is not tenant-leading, so for one tenant among thousands the scan reads the whole time range and discards nearly all of it.
Rewrite the bound carefully, because the obvious rewrite is only conditionally equivalent. date_trunc('hour', x) >= $2 equals x >= $2 only when $2 is already hour-aligned; for an arbitrary $2 it means x >= date_trunc('hour', $2) + interval '1 hour'. Normalise the parameter in the caller and leave the column bare.
Restore pruning with a second, redundant predicate on the partition key: ingested_at >= $2 - interval '<late-data horizon>'. State both sides of it. It prunes to a handful of partitions, and it silently omits any event whose ingest lagged past that horizon, which is precisely what a producer replay produces. Either document the horizon as a stated bound, or partition on occurred_at and move the problem into the dedup window instead.
Propose (tenant_id, occurred_at) include (sku, quantity) per partition. A partial index where environment = 'production' mostly saves size rather than selectivity, since production dominates the three environments; take it if non-production is a meaningful share and skip it otherwise.
Price the write path honestly. At roughly 250M rows/day each extra index is another insert plus WAL per row, and a tenant-leading key scatters inserts across one hot leaf per active tenant instead of appending to a single rightmost leaf, so page dirtying and random I/O both rise. An INCLUDE payload widens every leaf entry and enlarges the index accordingly.
Add the index-only-scan caveat before someone reports it as a regression: on a freshly appended table the visibility map is not yet set for recent pages, so the INCLUDE columns still cost heap fetches until autovacuum has been through, and the newest hour is exactly the data the dashboard reads.

Worked solution (30 min)

Build 30 daily partitions with skewed tenants, one holding about 40% of the rows, then ANALYZE.
Run explain (analyze, buffers) on the original query and record how many partitions were scanned and the rows removed by filter.
Apply the rewritten predicate and the index, re-run, and confirm the plan lists only the partitions inside the ingested_at bound.
Re-run with $2 set to a non-hour-aligned timestamp and confirm the rewritten and original predicates return identical rows.
Insert an event with ingested_at six hours past occurred_at and check whether the pruning predicate excludes it.

Expected result: Three causes named separately: a non-sargable date_trunc, pruning on ingested_at against a predicate on occurred_at, and a non-tenant-leading index. A rewrite to occurred_at >= <hour-normalised $2> plus a redundant ingested_at >= $2 - horizon, an index on (tenant_id, occurred_at) including sku and quantity, a per-row write cost stated, and the late-data omission the pruning predicate introduces stated as a known bound.

Verify it yourself

The plan lists only partitions inside the ingested_at bound.
Rows removed by filter on the index scan is small relative to rows returned.
The rewritten and original predicates agree for both hour-aligned and non-aligned bounds.
A deliberately late-ingested event is visible or omitted exactly as the stated horizon predicts.

Follow-up

CREATE INDEX CONCURRENTLY is not supported on a partitioned parent. Give the sequence that gets this index onto 400 existing partitions without blocking ingest.
One tenant holds 200 times the median row count and the dashboard still times out for them with the index in place. What changes?
Should this read hit usage_rollup_hourly instead? State what that costs in freshness and what the watermark lets you promise.

Explain how recursion works and describe what happens to the recursive call stack during execution.

Medium

Approach

State your assumptions explicitly before working the problem.
Clarify what is being asked and what a complete answer contains.
Say what you would check first and why it is the highest-information step.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

How would you approach designing a software interface for system operators who need to monitor critical hardware components in real time?

Medium

Approach

Work from the requirement backwards to the design.
Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Webhook fan-out with per-endpoint isolation and backoff

Medium · fan-out · backpressure · circuit breaker · ordering

One domain event fans out to every matching subscription, producing a webhook_delivery row per (subscription_id, event_id, redelivery_seq). Peak unique event rate is 20k/second; attempts run five to ten times that once fan-out and retries are counted. One customer endpoint has returned 503 for six hours and its backlog holds days of events; every other customer must be unaffected. Design the delivery system: how a worker claims work, the backoff schedule, the per-endpoint circuit breaker, the queue partitioning, and whether you offer ordering per subscription. State the delivery guarantee in one sentence.

Approach

State the guarantee first, because it determines the rest: at-least-once with a stable event_id, and the consumer documented as responsible for idempotency. Exactly-once over HTTP is not deliverable - the 200 can be lost after the customer has already committed - so any design that promises it is either lying or is really offering at-most-once.
Partition work per subscription rather than into one global pool, with a concurrency cap per subscription. With a shared pool, the endpoint that has been dead for six hours consumes workers on retries that will fail, and every other customer's delivery latency rises: head-of-line blocking across tenants is the exact failure being designed against here.
Claim by compare-and-set with a fencing token: UPDATE webhook_delivery SET status = 'in_flight', lease_token = $new, leased_until = now() + interval '60 seconds' WHERE delivery_id = $1 AND status IN ('pending','failed_retryable') AND (leased_until IS NULL OR leased_until < now()), and make the terminal write carry AND lease_token = $new so a paused worker's late write is rejected rather than overwriting a newer attempt. Find due work through the partial index on next_attempt_at WHERE status IN ('pending','failed_retryable'), so the scan is proportional to live rows rather than to the terminal rows that outnumber them by orders of magnitude.
Use full jitter: sleep uniformly in [0, min(cap, base x 2^(attempt-1))]. Plain exponential backoff hands a recovering endpoint its entire backlog as one synchronised herd and knocks it over again; full jitter de-correlates it. Then check the schedule actually spans the retention you promise - with base 1 s and a 3,600 s cap, twenty attempts have an expected total elapsed time of only about 4.6 hours, so a twenty-four-hour promise needs roughly fifty-nine attempts or a larger cap.
Trip a circuit per endpoint on consecutive failures or a failure ratio over a rolling window: stop dispatching, push next_attempt_at out or mark new deliveries dropped_circuit_open, and half-open with exactly one probe rather than a batch. Bound the backlog explicitly with a per-subscription cap or retention, and decide in advance whether a recovered endpoint receives six hours of events at full rate or a pointer telling it to fetch what it missed.
Offer ordering only as an opt-in mode of one in-flight attempt per subscription, and price it honestly: with parallel attempts a retried event overtakes a newer one, so ordering requires serialisation, and serialisation means one slow endpoint blocks its own queue entirely. That converts a shared problem into that customer's own problem, which is the right place for it, but it is still a real cost.

Worked solution (35 min)

Compute the attempt rate: 20k unique events/second x mean fan-out x retry multiplier, and size worker pools and the per-subscription concurrency cap from it.
Write the claim statement and the terminal write, and point at the clause that rejects a resumed worker's stale write.
Tabulate the backoff for attempts 1 to 20 with base 1 s and cap 3,600 s, take the expected value of each full-jitter sleep as half its ceiling, and sum to get total expected elapsed coverage.
Decide the policy for a subscription down six hours: events buffered, bytes held, and what the customer actually receives when it returns.

Expected result: At-least-once with a stable event_id; per-subscription lanes with a concurrency cap; lease-and-fence claiming; full jitter whose schedule matches the retention promised - with base 1 s and a one-hour cap, twenty attempts covers only about 4.6 hours of expected elapsed time, so twenty-four hours needs roughly fifty-nine attempts or a larger cap; a per-endpoint breaker with a single half-open probe; ordering offered only as opt-in single-in-flight with head-of-line blocking named as its price.

Verify it yourself

Sum the expected sleeps in your schedule and compare against the retention window you promised the customer. If the two numbers disagree, one of them is wrong and it is usually the promise.
Execute the terminal write with a stale lease_token and confirm it affects zero rows. If it succeeds, the lease was doing the work alone and the token is decorative.
The dead endpoint's backlog must not be visible in any queue another subscription's workers poll. If one index scan serves all subscriptions, the isolation is nominal.

Follow-up

The endpoint recovers. Does it receive six hours of events at full rate, and what does that do to it?
Trace the exact code path by which an event belonging to one tenant could be signed and sent to another tenant's endpoint.
A customer insists they never received an event your row marks delivered. What evidence do you have, and what does payload_digest let you prove?

Metering partition crash-loops and the sealing watermark freezes

Medium · poison message · at-least-once · dead-letter queue

One metering-ingest partition has stopped advancing. Lag grows linearly, the consumer restarts about every 40 seconds, and the same offset appears in every startup log while other partitions stay healthy. Events are committed in batches of a few thousand and the acknowledgement follows the commit. Sealing is six hours away and source_max_ingested_at for that partition's tenants is frozen. Give an ordered checklist, a containment action available within minutes, and the durable fix, saying what each does to exactly-once accounting.

Approach

Distinguish a poison record from a capacity problem in one measurement: compare the offset and the exception across restarts. An identical pair every time is deterministic failure on one record, whereas a throughput problem still advances the offset between crashes.
Read the record from a separate consumer group so the bytes can be inspected without perturbing the stuck consumer, then classify the defect: schema violation, a quantity failing the non-negative check, a null workspace, an unmappable SKU enum, or a payload past a size limit. That classification decides whether this is a producer bug or a missing consumer guard.
Account for batch granularity before acting. With commits of a few thousand, one bad record fails thousands of good ones, so the blast radius is the batch. Halve the batch around the offset to isolate the record, or move to per-record error isolation so the radius becomes the record.
Contain by diverting that record to a dead-letter store with its raw bytes and offset, then resume. This is safe here precisely because the acknowledgement follows the commit: the good records from the failed batch are re-consumed and absorbed by the uniqueness check on (tenant_id, idempotency_key) rather than counted twice.
Make the fix durable with per-record error isolation, a bounded poison counter, and an alert on dead-letter rate rather than on lag alone, since lag only reveals this after the sealing margin has already been eaten.
Check the horizon before replaying anything. The unique index lives on a daily-partitioned table and therefore includes the partition key, so it deduplicates within a day only; a replay landing on a later ingest day needs the separate dedup store or it double-counts into a tenant's bill.

Follow-up

Move the acknowledgement before the commit and describe exactly what is lost and what is duplicated in each of the two crash windows.
Sealing is in six hours and the partition will not drain in time. What do you seal on, and what does the invoice have to record so the difference is explainable later?
A producer replays two weeks of events next month. Which part of your fix stops holding, and what is the dedup horizon you would actually configure?

Suggested practice checklist

For someone fluent in a dynamic language who has shipped real work but has never had to say what the runtime is doing underneath. The week is built on measuring and deliberately breaking things, because the questions that expose this background are the ones where the interviewer asks why a second time.

Day 1 — Measure before reasoning

Take a slow piece of your own code, write down in advance where you believe the time goes, then profile it and record how wrong the guess was. The cost is usually an allocation you did not notice or an accidental quadratic membership test.
Replace one list membership test inside a loop with a set and measure at a thousand, ten thousand and a hundred thousand elements, confirming the shape of the curve rather than only that it got faster.
Write down the three quantities you can now measure instead of assert: wall time, peak memory, and call count for the function you suspected.

Deliverable: A before-and-after profile of real code plus a written note on the size of the gap between the guess and the measurement.

Day 2 — References, copies, and the bugs they produce

Write the function with a mutable default argument, call it three times, and explain the accumulating result: the default is evaluated once when the function is defined, so every call shares one object.
Build a nested structure, take a shallow copy, mutate an inner element, and show that both views changed, because a shallow copy duplicates the container and not the elements. Then fix it with a deep copy and state the cost you just accepted.
Write two functions, one mutating its argument in place and one rebinding the local name, and predict the caller's view of each before running it. That single distinction produces most of the bugs that pass their tests.

Deliverable: Three small programs whose output you predicted correctly before running, each with a one-line statement of the rule underneath.

Day 3 — Types, once, in a language that checks them

Port one module you have already written, roughly a hundred lines, into a statically typed language, and record every place the compiler demanded an answer your original had left implicit: a value that can be absent, a numeric width, a case never handled.
Write the same signature in both languages and state what the static one guarantees before the program runs and what it does not, since it will not save you from a wrong algorithm or an index out of range.
Write the difference between an interface satisfied by declaration and one satisfied structurally, with one case each where the other approach would miss the mistake.

Deliverable: One module in two languages plus a list of the questions the type checker forced you to answer.

Day 4 — Concurrency, starting with what actually runs at the same time

Run the same CPU-bound function across four threads and four processes and measure both. Under the default CPython build the threaded version will not speed up, because only one thread executes bytecode at a time; the process version will. Check which build you are on first, since free-threaded builds remove that lock and change the result.
Then run a blocking I/O workload across four threads and measure it speeding up, because the interpreter releases that lock around blocking calls, which is why treating threads as useless is wrong as a general claim.
Build the lost update: two threads each incrementing a shared counter a hundred thousand times, and show a final value below the expected sum, because an increment is a load, an add and a store and the thread can be suspended between them. Fix it with a lock and then measure what the lock costs.

Deliverable: Three measurements, threads against processes on CPU work, threads on I/O work, and a demonstrated lost update, each with the mechanism written underneath.

Day 5 — Debugging as a procedure rather than an instinct

Work one real failure as a bisection: find a revision or an input size where it is good and one where it is bad, halve repeatedly, and state the two assumptions bisection needs, that the property changes exactly once across the range and that the test is reliable.
Minimise one failing input to the smallest version that still fails, and record how many rounds it took.
Keep a hypothesis log for one bug in three columns, what I believe, what would disprove it, what I observed, and stop yourself the first time you are about to change two things at once.

Deliverable: One bug worked to root cause with a written hypothesis log and a minimised reproducing input.

Day 6 — Tests that catch the bug you are about to write

Implement an LRU cache with a capacity bound, then write the three test cases that would catch an off-by-one in eviction: insert exactly capacity items and assert nothing was evicted, insert one more and assert the least recently used key is the one gone, and read an old key just before that insert so the eviction victim changes.
Add a property test comparing your implementation against a deliberately slow reference, an ordered list scanned linearly, over a few thousand random operation sequences, because a slow reference finds the cases you would not have thought to write.
Write one numeric test that fails under exact equality and passes with a tolerance, and state why the tolerance has to be relative rather than absolute once the magnitudes grow.

Deliverable: An LRU implementation with three boundary tests, one property test against a slow reference, and one tolerance-based numeric test.

Day 7 — Debug something broken, out loud

Have someone plant three defects in a two-hundred-line program, an off-by-one, a shared mutable state bug, and a wrong error-handling path, then find them while narrating, under a fixed rule: state the hypothesis before touching anything.
Time each one and record which tool found it, reading, a printed value, a debugger, or a test, because the question asked in interviews is how you would find it rather than what it was.
Write the sentence you will use when you do not yet know the cause, one that names the next measurement instead of offering a guess.

Deliverable: A recorded debugging session with time-to-find per defect and the method that found each.

Disagreement needs an outcome you did not choose

Conflict answers where you were right and everyone came round are the weakest ones. Stronger: the evidence you went and collected, what would have changed your mind, and what you did in the weeks after the call went against you. Implementing a design you argued against, properly, is a specific and checkable behaviour.

How do you handle memory management and prevent memory leaks in languages like C++ or Java?

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Name the disagreement and how you resolved it with evidence.
Give the blast radius: what could have broken, and what you measured.

Follow-up

How did you know your change caused the improvement?
What would you do differently if you ran that again?

How do you handle a situation where a critical deadline is approaching, but your software still has unresolved bugs?

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

Describe a time when you had to explain a highly complex technical concept to a non-technical stakeholder or teammate.

Medium · behavioural and engineering judgement

Approach

Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.
Pick a story where you made the decision, not one where you watched it.

Follow-up

What did you decide not to do, and why?
What would you do differently if you ran that again?

Tell me about a past programming project where you had to learn a completely new technology or language on the job. How did you approach it?

Medium · behavioural and engineering judgement

Approach

Give the blast radius: what could have broken, and what you measured.
Close with what you would do differently, concretely.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?