Interview guides · Iunu

Iunu Software Engineer Interview Guide

Iunu Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

At Iunu, a Software Engineer is at the intersection of advanced computer vision, machine learning, and large-scale data systems. You are not just writing code; you are building the infrastructure that powers the future of autonomous agriculture. Your work directly impacts how our systems perceive, analyze, and optimize plant health, requiring a high degree of technical precision and a passion for solving complex, real-world problems. This role is critical to our mission of digitizing the greenhouse. You will be responsible for building robust, scalable, and maintainable systems that handle massive datasets generated by our proprietary hardware.

This guide is scoped to a Software Engineer candidate at Iunu.

Focus areas

Full-stack Development
Software Engineering (General)
Staff-Level Software Engineering

Where to focus your preparation

No round sequence has been reported for Iunu. Confirm the format with your recruiter.

Preparation focus

No round sequence has been reported for this company, so confirm the format with your recruiter and work the reported questions below.

What to demonstrate

Breadth across the topics this company reports testing
Whether you confirm the format before preparing for it

How to prepare

Ask the recruiter for the sequence, the duration of each stage and whether you will be writing code
Work the reported questions below and time yourself

Where candidates lose points

Own your narrative

Be prepared to discuss your resume in detail. Every project you list is an opportunity to showcase your depth of knowledge.

Ask meaningful questions

Use your interview time to learn about our challenges. Asking about our technical debt or upcoming roadmap shows that you are already thinking like a team member.

Clarify the ambiguity

If an interviewer asks an open-ended question, take a moment to ask clarifying questions before jumping into a solution. This demonstrates a structured and thoughtful approach.

Your interviewers are looking for a colleague, not just a coder

Show your personality and your passion for our mission alongside your technical skills.

Questions & practice

Canonicalise a request body into a stable idempotency fingerprint

Medium · parsing · canonicalisation · hashing

idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.

Approach

Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.

Follow-up

A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
Where does the fingerprint get computed relative to request decompression and the body-size limit?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

Diff a projection against the primary without per-row point reads

Hard · reconciliation · range hashing · throttling

The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.

Approach

Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.

Follow-up

The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?

Replace offset paging on the resource feed with keyset

Easy · keyset pagination · composite index · sort order

resource holds resource_id, tenant_id, owner_user_id, title, body_ref, version, status ('draft','active','archived','deleted'), created_at, updated_at, deleted_at, with an index on (tenant_id, status, updated_at DESC, resource_id DESC). The listing endpoint returns active resources for one tenant, newest update first, 50 per page, today with LIMIT 50 OFFSET n. Tenants reach page 400 and rows are created while they read. Write the keyset query, define what the cursor carries and how it is encoded, and say which part of the index each predicate uses. Assume PostgreSQL 16.

Approach

Name the two failures separately. OFFSET 20000 makes the server produce and discard 20,000 rows, so page cost grows with depth rather than with page size. Independently, any write that changes how many rows sort above the offset moves the window between two fetches, and the direction decides which anomaly you get: an insert lands at the head of updated_at DESC and pushes already-returned rows down past the boundary, so they are returned a second time; a delete above the offset, or a row whose updated_at is bumped above the cursor, pulls rows up and one is never returned at all. Nothing in the response reveals either.
Write the seek: WHERE tenant_id = $1 AND status = 'active' AND (updated_at, resource_id) < ($2, $3) ORDER BY updated_at DESC, resource_id DESC LIMIT 50. The row-value comparison is one index range rather than a disjunction, and both columns are NOT NULL, which is what makes that comparison well defined.
Map each predicate onto the index: tenant_id and status are equality on the leading columns, (updated_at, resource_id) is the range, and the ORDER BY matches the index order so no Sort node appears and the scan stops after 50 rows. The DESC in the definition only matters for mixed directions — a plain ascending btree on the same columns is read backwards for this query.
Put both sort columns in the cursor and nothing the client can tamper with into another tenant: base64 of (updated_at, resource_id), validated server-side, with tenant_id taken from the principal.

Follow-up

The client asks for 'jump to page 400'. What do you offer instead, and what does the honest version cost?
Sort order becomes user-selectable across four columns. How many indexes is that, and which would you refuse to add?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.

Follow-up

A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?

Shard by tenant when one tenant outgrows a single shard

Hard · sharding · hot partition · routing

One primary holds resource, resource_revision, outbox_event and idempotency_key for every tenant and is at its write ceiling at 1.2k writes/second. tenant_id leads every index. Shard across eight primaries. One tenant holds 22% of all rows and by itself exceeds a single shard's write capacity. Design the routing, the split of that tenant, and the online move of a tenant between shards with writes continuing. State what breaks for queries that are tenant-scoped today, and exactly what a write must do when it arrives at the old shard after the cutover.

Approach

Route on a unit smaller than a tenant from the start. Make the routing key (tenant_id, bucket) with a fixed bucket count - 64 over eight shards - and keep a directory mapping each (tenant_id, bucket) to a shard, carrying a version and cached in every service. An ordinary tenant has all 64 buckets pointing at one shard and behaves exactly as it does today; only the hot tenant has its buckets spread. Hashing tenant_id alone spreads tenants evenly, gives you no way to move one, and has no answer at all for a tenant larger than a node. The bucket count is the part you cannot change later without rehashing rows, so pick it well above the shard count and rebalance by moving buckets, not by re-bucketing.
For the tenant that exceeds one node, its buckets must land on different shards - that is the whole point of bucketing it, and buckets confined to its own shard would rename the rows while leaving every write on the node whose ceiling it already exceeds. Size it from measured numbers rather than from its row share: 22% of rows says nothing about write rate. The current primary tops out near 1.2k writes/second on this hardware and workload, so a tenant peaking at W writes/second needs its buckets spread over at least ceil(W / headroom-per-shard) shards, where the divisor is the share of each shard's ceiling you are willing to give it while that shard still serves other tenants - not the full 1.2k. Size on its peak, not its mean.
Fix the co-location invariant at the right grain. What must commit in one transaction is a resource, its resource_revision row and its outbox_event row, so the bucket is a property of the resource: derive it once at creation and stamp it into resource_id, and every later revision and event routes with its parent for free. Per-tenant co-location was never the requirement, and mistaking it for one is what makes a tenant look unsplittable. What genuinely breaks is an invariant spanning two resources of one tenant - a per-tenant counter, uniqueness across its resources - which now needs either a home-shard table or two-phase commit, and 2PC at this write rate is not a serious option.
Keep the idempotency constraint arbitrating, because it is now enforced per shard. PRIMARY KEY (tenant_id, idempotency_key) only continues to reject a retry if the same key always lands on the same shard, so derive the create-path bucket from hash(tenant_id, idempotency_key) and mint the new resource_id inside that bucket, which also puts the key row and the resource it guards in one transaction. A bucket chosen from anything that differs between a request and its retry - a timestamp, the worker id, a client-supplied resource id - splits one key across two shards, both inserts succeed, and the write endpoint's retry safety is silently gone.

Follow-up

The fence lasts 90 seconds instead of 4 because the final delta keeps growing. What is happening, and what do you do while the tenant is fenced?
Two tenants must merge into one account. What does that cost under this scheme, and which step is not reversible?

Choose what to break when replication lag reaches forty seconds

Hard · replication lag · read-after-write · consistency vs availability

Reads are served from two replicas: 14k requests/second, about 85% absorbed by cache, so roughly 2.1k reads/second reach the database. Writes go to the primary at 1.2k/second. A tenant's backfill drives replication lag from under 100 ms to 40 seconds and it is still climbing. Sessions that have just written are pinned to the primary. Decide, endpoint class by endpoint class, whether to serve stale, fail, or route to the primary, and justify each choice with the load it adds to the primary. Then state what you would have built beforehand.

Approach

Establish blast radius before cause, because mitigation and diagnosis have different deadlines. The decisive arithmetic is what happens if the database reads move to the primary: 2.1k reads/second on top of 1.2k writes/second roughly triples its operation count, on the node already absorbing the backfill that caused this. Reads and writes are not equal in cost, so treat that as an argument against a blanket move rather than as a capacity model - but it is enough to rule out routing everything to the primary.
Classify endpoints by what staleness costs, not by how important they feel. Reads whose staleness is invisible - listings, search, counters - stay on the replica and return the watermark so the client can tell. Reads that immediately follow that same session's write keep their primary pin, which is a small bounded slice of traffic rather than the whole 2.1k/second. Reads that feed a decision with a side effect - authorisation, quota, the read half of a read-modify-write - must not be stale at all, because a 40-second-old permission row is the stale-permission failure wearing a different costume; those go to the primary or fail.
Shed instead of queueing. If the must-be-fresh class alone exceeds the primary's headroom, refuse its lowest-value slice with 503 and a retry-after. A request queued behind a saturated primary holds a connection for a client that has already given up, and the retry storm that follows is what turns degradation into an outage. Bound the connection pool per role so the read fallback cannot consume the write path's connections - that bulkhead is the single decision that determines whether writes survive the next ten minutes.
Attack the cause in parallel, since it is the one thing that can be stopped. The backfill is the load generator. A backfill that reads replication lag as its throttle signal and pauses above a threshold would have made this a non-event, with batch sizes small enough that each batch's write volume is a fraction of what a replica can apply per second. That is most of the answer to what should have existed beforehand.

Follow-up

Lag returns to normal in nine minutes. Which mitigation do you remove first, and which one stays permanently?
A user reports their change did not save, and the write committed. Trace the path that produces that report and name the signal that would have shown it before the report arrived.

Read latency spikes on a sixty-second sawtooth

Medium · cache stampede · single-flight · ttl

The cached listing read path serves about 14k reads/second at an 85% hit rate. p99 sits at 35 ms for 57 seconds, jumps to 900 ms for 3, and repeats. During each spike the primary shows several hundred identical listing queries starting within the same millisecond, all carrying one large tenant's id. Cache entries use a 60-second TTL. Give the mechanism, the ordered checks, the fix, and the correctness hazard your fix must not introduce.

Approach

Match the period to a configured number before theorising about load. A spike every 60 seconds against a 60-second TTL is an entry expiring, and you confirm it by correlating spike timestamps with the entry's write time rather than with the traffic curve. If the period had matched a cron or a GC interval instead, this is a different investigation.
Establish the concurrency of the miss. Several hundred identical queries in one millisecond means the miss path has no coalescing: every request that arrives between expiry and repopulation recomputes. The herd size is that key's arrival rate times its recompute time, so at 1.2k reads/second for the hot key and a 250 ms recompute you expect about 300 concurrent misses, which matches what is observed.
Add single-flight on the miss path so one caller per key recomputes under a short-lived lock while the rest wait for its result. Prefer stale-while-revalidate where the read tolerates it: return the expired value immediately and refresh asynchronously, which removes the latency spike rather than serialising it into a queue of waiters.
De-synchronise the keys. Write TTLs with jitter, for example 60 seconds plus or minus 10%, so a deploy or a mass invalidation does not align every key on the same second and turn a per-key herd into a fleet-wide one.

Follow-up

The same sawtooth appears on a key that is invalidated on write rather than expired. Is that the same bug?
How does your answer change if the recompute takes 4 seconds instead of 250 ms?

Suggested practice checklist

Built from the topics and questions Iunu candidates report; no round sequence has been reported.

Day 1 — Establish the Iunu format

No round sequence has been reported, so ask your recruiter for the sequence, the duration of each stage and whether you will write code.

Deliverable: A written reply from your recruiter confirming the format.

Day 2 — Work Full-stack Development

Spend the session on Full-stack Development, which Iunu candidates report being tested on.
Write one worked example in Full-stack Development and time yourself on it.

Deliverable: One timed worked example in Full-stack Development.

Day 3 — Work Software Engineering (General)

Spend the session on Software Engineering (General), which Iunu candidates report being tested on.
Write one worked example in Software Engineering (General) and time yourself on it.

Deliverable: One timed worked example in Software Engineering (General).

Day 4 — Work Staff-Level Software Engineering

Spend the session on Staff-Level Software Engineering, which Iunu candidates report being tested on.
Write one worked example in Staff-Level Software Engineering and time yourself on it.

Deliverable: One timed worked example in Staff-Level Software Engineering.

Day 5 — Answer out loud: Behavioral and Team Dynamics

Answer aloud, timed: Tell me about a time you had to explain a complex technical issue to a non-technical stakeholder.
Answer aloud, timed: Describe a situation where you disagreed with a team member on a technical approach. How did you resolve it?

Deliverable: Spoken answers to 2 reported Behavioral and Team Dynamics question(s), under time.

Day 6 — Rehearse your own examples

Prepare three examples from your own work where you made the decision, each with the outcome you can quantify.

Deliverable: Three examples written out, each with a number attached.

Day 7 — Dry run for Iunu

Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.