Isar Aerospace Software Engineer Interview Guide

The 60-second brief

As a Software Engineer at Isar Aerospace, you are at the cutting edge of European space technology. You are not just writing code; you are building the digital infrastructure that enables reliable, cost-efficient access to space. Whether you are developing Flight Software that controls rocket systems in real-time or building the Ground Systems that monitor launch telemetry, your work has a direct, tangible impact on the success of every mission. The role demands a rare blend of high-performance engineering and mission-critical reliability. You will work in a fast-paced environment where software must interface seamlessly with complex hardware, requiring deep technical rigor and an unwavering commitment to safety. This position is ideal for engineers who thrive on solving high-stakes challenges where precision is non-negotiable and innovation is a daily requirement.

This guide is scoped to a Software Engineer candidate at Isar Aerospace.

Focus areas

• C++
• Flight Software
• Real-Time Systems

The Isar Aerospace interview process

Isar Aerospace candidates report 2 rounds over 2-4 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

A preliminary assessment to gauge your background and fit for the role.

What to demonstrate

• A preliminary assessment to gauge your background and fit for the role
• Depth in C++

How to prepare

• Be able to walk your CV end to end in two minutes, and say why this company specifically.
• Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Deep-Dive Technical Rounds

In-depth interviews focusing on coding proficiency, system design skills, and architectural thinking.

What to demonstrate

• In-depth interviews focusing on coding proficiency, system design skills, and architectural thinking
• Depth in C++

How to prepare

• Answer aloud and timed: How do you ensure thread safety when working with multiple asynchronous processes?
• Answer aloud and timed: Describe your approach to debugging race conditions in a multithreaded environment.

Where candidates lose points

Show your work

When solving a problem, talk through your thought process out loud. We are as interested in your reasoning as we are in the final code.

Think about failure

Always consider what happens when something goes wrong. In aerospace, "happy path" coding is rarely enough.

Be ready for depth

If you list a technology on your resume, expect to be questioned on how it works under the hood.

Questions & practice

How do you optimize memory usage for real-time systems?

Medium · Technical & C++ Proficiency

Approach

1. Say what the runtime actually does before reasoning about the code.
2. Name what is shared across threads and what owns each piece of state.
3. Identify the window where an invariant is briefly untrue.
4. Distinguish a value from a reference to it, and say which one you handed out.

Follow-up

• What happens if two callers reach this at the same time?
• Where could this allocate more than you expect?

How do you ensure thread safety when working with multiple asynchronous processes?

Medium · Technical & C++ Proficiency

Approach

1. Say what the runtime actually does before reasoning about the code.
2. Name what is shared across threads and what owns each piece of state.
3. Identify the window where an invariant is briefly untrue.
4. Distinguish a value from a reference to it, and say which one you handed out.

Follow-up

• What happens if two callers reach this at the same time?
• Where could this allocate more than you expect?

Describe your approach to debugging race conditions in a multithreaded environment.

Medium · Technical & C++ Proficiency

Approach

1. Say what the runtime actually does before reasoning about the code.
2. Name what is shared across threads and what owns each piece of state.
3. Identify the window where an invariant is briefly untrue.
4. Distinguish a value from a reference to it, and say which one you handed out.

Follow-up

• What happens if two callers reach this at the same time?
• Where could this allocate more than you expect?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

1. One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
2. Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
3. State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
4. Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.

Follow-up

• A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
• Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?

Denormalise tenant onto revisions and backfill it live

Hard · denormalisation · online migration · backfill

resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.

Approach

1. Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
2. Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
3. Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
4. Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.

Follow-up

• The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
• How do you verify the backfill actually finished, given rows are still being inserted while it runs?

Explain the difference between stack and heap allocation in the context of flight software.

Medium · Technical & C++ Proficiency

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How would you implement a robust error-handling mechanism for a critical hardware interface?

Medium · Technical & C++ Proficiency

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How would you design a telemetry system that handles high-frequency data streams?

Medium · System Design & Architecture

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

Describe how you would ensure system modularity to allow for rapid iteration on hardware components.

Medium · System Design & Architecture

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

How do you approach designing for high availability in a distributed ground-control network?

Medium · System Design & Architecture

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

What strategies would you use to simulate hardware behavior for unit testing?

Medium · System Design & Architecture

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

Exports duplicate a row range about once a week

Hard · leases · clock skew · idempotency

Roughly once a week an export writes a file containing a duplicated range of rows. The affected job_run rows show attempt = 1, status = succeeded, one started_at, and a lease_owner naming a different host from the one whose logs show the job starting. Leases last 30 seconds and are heartbeated every 10 from inside the handler; lease_expires_at is computed on the worker and compared against the database's now(). Find the mechanism, and give a fix that holds even if you cannot fix the clocks.

Approach

1. Start from the fact that eliminates the obvious answer. attempt = 1 means no retry was recorded, so this is not a re-run after failure; two workers ran the same row concurrently and the takeover path never touched the counter. lease_owner naming a host other than the one that started the job is the same statement from the other side.
2. Enumerate the mechanisms that cause a premature takeover, then find the signal that separates them. Either the lease genuinely expired because the heartbeat did not fire, which is what happens when the heartbeat runs on the handler's own thread and the handler makes a long blocking call, or it only appeared expired because two clocks disagree, since lease_expires_at is written from the worker's clock and evaluated against the database's. The discriminator is the distribution: incidents clustered on the longest exports indict the heartbeat, incidents clustered on one host indict skew. Measure both, and measure each host's offset against the database directly.
3. Read the reclaim query precisely. In PostgreSQL now() is transaction start time, not statement time, so a reclaimer holding a long transaction compares against an older timestamp than expected; clock_timestamp() is the statement-time function. This is worth ruling in or out before you redesign anything, because it changes which rows look expired.
4. Remove the second clock rather than trying to synchronise it. Issue and extend the lease in the database, with lease_expires_at = now() + interval '30 seconds' in both the claim and the heartbeat, so exactly one clock is ever compared and worker skew stops mattering to this predicate.

Follow-up

• The displaced worker has already streamed half the file to object storage. What makes that side effect safe to repeat?
• You now count takeovers. What alert fires on that counter, and at what threshold?

Suggested practice checklist

Built from the rounds and topics Isar Aerospace candidates report.

Day 1 — Map the Isar Aerospace loop

• Write out the reported sequence: Initial Screening, Deep-Dive Technical Rounds.
• For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 2 reported rounds, with the weakest marked.

Day 2 — Work C++

• Spend the session on C++, which Isar Aerospace candidates report being tested on.
• Write one worked example in C++ and time yourself on it.

Deliverable: One timed worked example in C++.

Day 3 — Work Flight Software

• Spend the session on Flight Software, which Isar Aerospace candidates report being tested on.
• Write one worked example in Flight Software and time yourself on it.

Deliverable: One timed worked example in Flight Software.

Day 4 — Work Real-Time Systems

• Spend the session on Real-Time Systems, which Isar Aerospace candidates report being tested on.
• Write one worked example in Real-Time Systems and time yourself on it.

Deliverable: One timed worked example in Real-Time Systems.

Day 5 — Answer out loud: Technical & C++ Proficiency

• Answer aloud, timed: How do you optimize memory usage for real-time systems?
• Answer aloud, timed: Explain the difference between stack and heap allocation in the context of flight software.

Deliverable: Spoken answers to 2 reported Technical & C++ Proficiency question(s), under time.

Day 6 — Answer out loud: System Design & Architecture

• Answer aloud, timed: How would you design a telemetry system that handles high-frequency data streams?
• Answer aloud, timed: Describe how you would ensure system modularity to allow for rapid iteration on hardware components.

Deliverable: Spoken answers to 2 reported System Design & Architecture question(s), under time.

Day 7 — Answer out loud: Behavioral & Problem Solving

• Answer aloud, timed: Describe a time you had to troubleshoot a critical failure under tight deadlines.
• Answer aloud, timed: How do you manage technical debt while maintaining a rapid development pace?

Deliverable: Spoken answers to 2 reported Behavioral & Problem Solving question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Describe a time you had to troubleshoot a critical failure under tight deadlines.

Medium · Behavioral & Problem Solving

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

How do you manage technical debt while maintaining a rapid development pace?

Medium · Behavioral & Problem Solving

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Give an example of a time you had to explain a complex technical trade-off to a non-technical stakeholder.

Medium · Behavioral & Problem Solving

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

How do you prioritize tasks when faced with conflicting requirements from hardware and software teams?

Medium · Behavioral & Problem Solving

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?