Impact Recruitment Group Software Engineer Interview Guide

The 60-second brief

As a Software Engineer at Impact Recruitment Group, you are tasked with building the technical foundation that drives our recruitment ecosystem. This role is critical to our mission of streamlining the hiring journey, requiring you to develop scalable, efficient, and reliable software solutions that support high-volume data processing and seamless user interactions. You will operate at the intersection of complex algorithmic challenges and practical system design. Whether you are optimizing backend pipelines or refining frontend interfaces, your contributions directly impact how we connect talent with opportunity. We look for engineers who possess both the technical depth to solve challenging engineering problems and the strategic mindset to build systems that stand the test of time. ##### Tip The interview process at Impact Recruitment Group is rigorous but focused.

This guide is scoped to a Software Engineer candidate at Impact Recruitment Group.

Focus areas

• Data Structures & Algorithms (DSA)
• System Design
• JavaScript (JS)

Where to focus your preparation

No round sequence has been reported for Impact Recruitment Group. Confirm the format with your recruiter.

Preparation focus

No round sequence has been reported for this company, so confirm the format with your recruiter and work the reported questions below.

What to demonstrate

• Breadth across the topics this company reports testing
• Whether you confirm the format before preparing for it

How to prepare

• Ask the recruiter for the sequence, the duration of each stage and whether you will be writing code
• Work the reported questions below and time yourself

Where candidates lose points

Communication is key

If you get stuck, talk through your thought process. Interviewers often look for how you handle ambiguity rather than just the final answer.

Know your resume

Every project you list is fair game for a deep dive. Be prepared to explain the architecture, the challenges, and the outcomes in detail.

Ask questions

Use the time at the end of the interview to ask about the team’s current challenges or the company’s engineering culture. It shows genuine interest.

Professionalism matters

Treat every interaction, from the initial email to the final interview, with the same level of professionalism and respect you expect in return.

Questions & practice

How would you optimize a search algorithm to find a target sum within a specific array index range?

Medium · Data Structures and Algorithms

Approach

1. Restate the input: its shape, its size, and what is guaranteed about it.
2. Name the brute-force solution and its complexity before improving on it.
3. Choose the data structure from the access pattern, not from familiarity.
4. State the target complexity and say which constraint rules the naive version out.

Follow-up

• How does this change if the input no longer fits in memory?
• What is the worst case, and how likely is it on real data?

Explain your approach to solving backtracking problems efficiently.

Medium · Data Structures and Algorithms

Approach

1. Restate the input: its shape, its size, and what is guaranteed about it.
2. Name the brute-force solution and its complexity before improving on it.
3. Choose the data structure from the access pattern, not from familiarity.
4. State the target complexity and say which constraint rules the naive version out.

Follow-up

• How does this change if the input no longer fits in memory?
• What is the worst case, and how likely is it on real data?

Can you implement a solution for a common LeetCode-style problem using JavaScript or Python?

Medium · Data Structures and Algorithms

Approach

1. Restate the input: its shape, its size, and what is guaranteed about it.
2. Name the brute-force solution and its complexity before improving on it.
3. Choose the data structure from the access pattern, not from familiarity.
4. State the target complexity and say which constraint rules the naive version out.

Follow-up

• How does this change if the input no longer fits in memory?
• What is the worst case, and how likely is it on real data?

How do you decide between different data structures when optimizing for memory versus speed?

Medium · Data Structures and Algorithms

Approach

1. Say what the runtime actually does before reasoning about the code.
2. Name what is shared across threads and what owns each piece of state.
3. Identify the window where an invariant is briefly untrue.
4. Distinguish a value from a reference to it, and say which one you handed out.

Follow-up

• What happens if two callers reach this at the same time?
• Where could this allocate more than you expect?

Explain the key differences and use cases for SQL versus NoSQL databases.

Medium · System Design and Architecture

Approach

1. Name the grain you start from and join outward from it.
2. Check whether any join is one-to-many before aggregating, or the sums inflate.
3. Say which index the query would use, and what makes it unusable.
4. Handle the rows that do not match: that is usually the actual question.

Follow-up

• How does the query change if that join becomes one-to-many?
• What happens to this when the table is ten times larger?

Find version gaps and relay lag with window functions

Medium · window functions · event tables · frame semantics

outbox_event holds event_id, aggregate_type, aggregate_id, aggregate_version, event_type, payload, status ('pending','published','dead'), attempts, created_at, published_at. A projection is missing rows and you must decide whether the relay skipped events or the consumer dropped them. Write three queries over the last seven days: one listing every aggregate_id whose published aggregate_version sequence has a hole, one giving per-day counts with a running total, and one returning the newest published event per aggregate. For each, say where the window function is evaluated relative to WHERE and LIMIT. PostgreSQL 16.

Approach

1. Gaps: compute lead(aggregate_version) OVER (PARTITION BY aggregate_id ORDER BY aggregate_version) in a subquery, then filter next_version <> aggregate_version + 1 in the outer query. Window functions are evaluated after WHERE, GROUP BY and HAVING and before the outer ORDER BY and LIMIT, so the predicate cannot sit in the same WHERE clause and PostgreSQL 16 has no QUALIFY.
2. Say what the seven-day filter does to the answer: it truncates every partition, so the first row per aggregate has no predecessor inside the window and a hole spanning the boundary is invisible. Widen the window, or join to resource.version as the authority for the true maximum.
3. Running total: SELECT date_trunc('day', created_at) AS d, count() AS n, sum(count()) OVER (ORDER BY date_trunc('day', created_at) ROWS UNBOUNDED PRECEDING). An aggregate inside a window call is legal because grouping runs before windowing. The grouping key is unique per row here so ROWS and RANGE agree, but write the frame anyway — over ungrouped rows with tied timestamps the default RANGE frame pulls in every peer row and the total jumps.
4. Newest per aggregate: DISTINCT ON (aggregate_id) ... ORDER BY aggregate_id, aggregate_version DESC is the cheap PostgreSQL-only form when an index matches that order; row_number() OVER (PARTITION BY aggregate_id ORDER BY aggregate_version DESC) = 1 is the portable form and needs a subquery for the same evaluation-order reason as the gap query.

Follow-up

• Relay failover redelivers events. Does a duplicate break the gap query, and how would you detect one from this table alone?
• Turn the gap check into a continuous monitor rather than a query someone runs after an incident. What does it watch?

Rebuild the search projection while it serves nine thousand queries

Medium · projections · eventual consistency · rebuild

The read-model service answers about 9k queries/second at a 120 ms p99 from a projection built off the event log, normally under 2 seconds behind. A mapping change forces a full rebuild from resource_revision, during which apply lag rises to minutes. Writes continue at 1.2k/second and events at 4k/second. Design the rebuild: how the new index is populated and cut over, how position is tracked per log partition, what the API returns alongside results so a client can tell a stale answer from a current one, and the criterion for cutting over.

Approach

1. Build into a second index and swap an alias rather than mutating the live one. The rebuild is then reversible by pointing the alias back, so a bad mapping costs a wasted rebuild instead of an outage. The price is peak storage for two full copies and double apply load during catch-up, and both numbers should be stated up front rather than discovered when disk fills.
2. Track position per log partition, not globally. Order is guaranteed only within an aggregate's partition, so progress is a vector, and the only number safe to publish is taken from the least advanced partition - the slowest one is what bounds completeness. Publishing the most advanced partition's position declares the projection current while another partition sits twenty minutes behind.
3. Make apply idempotent so the backfill and the live tail can overlap without a freeze. Each document records the aggregate_version it reflects, and any event at or below that version is discarded. This is why the event carries the full fact and not a delta: a delta cannot be discarded safely, and a consumer that calls back to read current state applies a state newer than the event it is processing, which is how a projection ends up with changes applied out of order.
4. Turn lag into a contract instead of a surprise. Return the watermark with every result set, and return the version produced by a write so the client can compare the two. A client that wrote version 7 and receives results at a watermark older than its own commit can show that its change is still landing, rather than rendering the previous value as current. Blocking the read until the projection catches up would convert a staleness problem into an availability problem at 9k queries/second, and choosing not to do that is the trade.

Follow-up

• The rebuilt index disagrees with the primary tables for 300 documents. Which is authoritative, and how do you decide without freezing writes?
• The rebuild doubles load on the log and pushes the projection p99 from 120 ms to 400 ms. What do you throttle, and which signal sets how much?

Shard by tenant when one tenant outgrows a single shard

Hard · sharding · hot partition · routing

One primary holds resource, resource_revision, outbox_event and idempotency_key for every tenant and is at its write ceiling at 1.2k writes/second. tenant_id leads every index. Shard across eight primaries. One tenant holds 22% of all rows and by itself exceeds a single shard's write capacity. Design the routing, the split of that tenant, and the online move of a tenant between shards with writes continuing. State what breaks for queries that are tenant-scoped today, and exactly what a write must do when it arrives at the old shard after the cutover.

Approach

1. Route on a unit smaller than a tenant from the start. Make the routing key (tenant_id, bucket) with a fixed bucket count - 64 over eight shards - and keep a directory mapping each (tenant_id, bucket) to a shard, carrying a version and cached in every service. An ordinary tenant has all 64 buckets pointing at one shard and behaves exactly as it does today; only the hot tenant has its buckets spread. Hashing tenant_id alone spreads tenants evenly, gives you no way to move one, and has no answer at all for a tenant larger than a node. The bucket count is the part you cannot change later without rehashing rows, so pick it well above the shard count and rebalance by moving buckets, not by re-bucketing.
2. For the tenant that exceeds one node, its buckets must land on different shards - that is the whole point of bucketing it, and buckets confined to its own shard would rename the rows while leaving every write on the node whose ceiling it already exceeds. Size it from measured numbers rather than from its row share: 22% of rows says nothing about write rate. The current primary tops out near 1.2k writes/second on this hardware and workload, so a tenant peaking at W writes/second needs its buckets spread over at least ceil(W / headroom-per-shard) shards, where the divisor is the share of each shard's ceiling you are willing to give it while that shard still serves other tenants - not the full 1.2k. Size on its peak, not its mean.
3. Fix the co-location invariant at the right grain. What must commit in one transaction is a resource, its resource_revision row and its outbox_event row, so the bucket is a property of the resource: derive it once at creation and stamp it into resource_id, and every later revision and event routes with its parent for free. Per-tenant co-location was never the requirement, and mistaking it for one is what makes a tenant look unsplittable. What genuinely breaks is an invariant spanning two resources of one tenant - a per-tenant counter, uniqueness across its resources - which now needs either a home-shard table or two-phase commit, and 2PC at this write rate is not a serious option.
4. Keep the idempotency constraint arbitrating, because it is now enforced per shard. PRIMARY KEY (tenant_id, idempotency_key) only continues to reject a retry if the same key always lands on the same shard, so derive the create-path bucket from hash(tenant_id, idempotency_key) and mint the new resource_id inside that bucket, which also puts the key row and the resource it guards in one transaction. A bucket chosen from anything that differs between a request and its retry - a timestamp, the worker id, a client-supplied resource id - splits one key across two shards, both inserts succeed, and the write endpoint's retry safety is silently gone.

Follow-up

• The fence lasts 90 seconds instead of 4 because the final delta keeps growing. What is happening, and what do you do while the tenant is fenced?
• Two tenants must merge into one account. What does that cost under this scheme, and which step is not reversible?

Read latency spikes on a sixty-second sawtooth

Medium · cache stampede · single-flight · ttl

The cached listing read path serves about 14k reads/second at an 85% hit rate. p99 sits at 35 ms for 57 seconds, jumps to 900 ms for 3, and repeats. During each spike the primary shows several hundred identical listing queries starting within the same millisecond, all carrying one large tenant's id. Cache entries use a 60-second TTL. Give the mechanism, the ordered checks, the fix, and the correctness hazard your fix must not introduce.

Approach

1. Match the period to a configured number before theorising about load. A spike every 60 seconds against a 60-second TTL is an entry expiring, and you confirm it by correlating spike timestamps with the entry's write time rather than with the traffic curve. If the period had matched a cron or a GC interval instead, this is a different investigation.
2. Establish the concurrency of the miss. Several hundred identical queries in one millisecond means the miss path has no coalescing: every request that arrives between expiry and repopulation recomputes. The herd size is that key's arrival rate times its recompute time, so at 1.2k reads/second for the hot key and a 250 ms recompute you expect about 300 concurrent misses, which matches what is observed.
3. Add single-flight on the miss path so one caller per key recomputes under a short-lived lock while the rest wait for its result. Prefer stale-while-revalidate where the read tolerates it: return the expired value immediately and refresh asynchronously, which removes the latency spike rather than serialising it into a queue of waiters.
4. De-synchronise the keys. Write TTLs with jitter, for example 60 seconds plus or minus 10%, so a deploy or a mass invalidation does not align every key on the same second and turn a per-key herd into a fleet-wide one.

Follow-up

• The same sawtooth appears on a key that is invalidated on write rather than expired. Is that the same bug?
• How does your answer change if the recompute takes 4 seconds instead of 250 ms?

Suggested practice checklist

Built from the topics and questions Impact Recruitment Group candidates report; no round sequence has been reported.

Day 1 — Establish the Impact Recruitment Group format

• No round sequence has been reported, so ask your recruiter for the sequence, the duration of each stage and whether you will write code.

Deliverable: A written reply from your recruiter confirming the format.

Day 2 — Work Data Structures & Algorithms (DSA)

• Spend the session on Data Structures & Algorithms (DSA), which Impact Recruitment Group candidates report being tested on.
• Write one worked example in Data Structures & Algorithms (DSA) and time yourself on it.

Deliverable: One timed worked example in Data Structures & Algorithms (DSA).

Day 3 — Work System Design

• Spend the session on System Design, which Impact Recruitment Group candidates report being tested on.
• Write one worked example in System Design and time yourself on it.

Deliverable: One timed worked example in System Design.

Day 4 — Work JavaScript (JS)

• Spend the session on JavaScript (JS), which Impact Recruitment Group candidates report being tested on.
• Write one worked example in JavaScript (JS) and time yourself on it.

Deliverable: One timed worked example in JavaScript (JS).

Day 5 — Answer out loud: Data Structures and Algorithms

• Answer aloud, timed: How would you optimize a search algorithm to find a target sum within a specific array index range?
• Answer aloud, timed: Explain your approach to solving backtracking problems efficiently.

Deliverable: Spoken answers to 2 reported Data Structures and Algorithms question(s), under time.

Day 6 — Answer out loud: System Design and Architecture

• Answer aloud, timed: Explain the key differences and use cases for SQL versus NoSQL databases.

Deliverable: Spoken answers to 1 reported System Design and Architecture question(s), under time.

Day 7 — Dry run for Impact Recruitment Group

• Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

How do you handle dynamic programming challenges in a high-pressure coding environment?

Medium · Data Structures and Algorithms

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Tell callers you do not own that their integration breaks

Medium · deprecation · compatibility · stakeholders

A field in a write endpoint's response must change shape. You own the endpoint; you do not own the four internal callers or the outbound webhook consumers who read it. Describe a deprecation you were responsible for: what you shipped first, how you established who was actually reading the field, the window you gave and what set its length, what you did about the consumer who never moved, and how you decided removal was safe. Name the signal you used, not the announcement you sent.

Approach

1. Establish the reader set empirically rather than from a wiki of owners: per-field usage counters keyed by principal, or access logs attributed to a consumer. State the blind spot of whichever you pick, since a consumer that reads the field only on a monthly job will not appear in a week of logs.
2. Ship additive first. Populate the new field alongside the old one so no reader is forced to move, which is also what keeps a rolling deploy safe, because old and new instances answer the same requests at the same time and a rollback must still find the old shape present.
3. Set the window from the slowest legitimate consumer's release cadence, not from your calendar, and decide separately what to do for a consumer with no release process at all, such as an external webhook endpoint you can only email.
4. Convert silence into evidence before you rely on it: a short, low-traffic removal window that makes a still-dependent consumer fail visibly and loudly while you are watching, rather than at three in the morning after you have moved on.

Follow-up

• How would you detect a consumer that reads the field only during a monthly export?
• One caller refuses to move and has a commercial relationship behind it. What changes in your plan and what does not?

Ship under a deadline and bound the debt you chose

Medium · pagination · technical debt · tradeoffs

You have four days to ship a tenant-facing listing endpoint. The version you would defend uses keyset pagination over (tenant_id, status, updated_at DESC, resource_id DESC); the version you can finish uses LIMIT/OFFSET with no matching index. Describe a deadline call you actually made of this shape: what you shipped, what you knowingly deferred, how you bounded the damage with a mechanism rather than an intention, and the specific numeric condition that would force the follow-up. Name who you told and where you wrote it down.

Approach

1. Name the deferred failure precisely instead of calling it slow. OFFSET n makes the database produce and discard n rows, so cost grows with page depth; without an index matching the sort, every matching row is read and sorted before the limit applies; and rows inserted between two page fetches shift across the boundary so items are skipped or repeated with nothing in the response to signal it.
2. Bound the blast radius with something mechanical rather than a promise: cap maximum page depth, cap page size, restrict the endpoint to one internal caller, or keep it behind a flag. State which failure each cap removes and which it leaves standing.
3. Attach a number to the trigger and wire it to an alarm: the first tenant crossing N resources, or the endpoint's p99 crossing its share of the 400 ms budget, so the debt announces itself instead of waiting to be remembered.
4. Write it where the next engineer looks, which is the code and the ticket, not a chat message: what was deferred, why, the cap, and the trigger.

Follow-up

• At what page depth does the offset version breach your latency budget, given your page size and row counts?
• What breaks first when you switch to keyset pagination later, and what does a client holding an old page token see?