Hya Tech Software Engineer Interview Guide

The 60-second brief

At Hya Tech, the Software Engineer role—specifically within our industrial automation and precision manufacturing divisions—is a cornerstone of our technical operations. You are not just writing code; you are bridging the gap between digital logic and physical machinery. Whether you are working as a PLC Programmer or a VMC Programmer, your contributions directly dictate the efficiency, safety, and precision of our production environments. This role is critical because you are responsible for the heartbeat of our automated systems. You will face complex challenges involving real-time hardware interaction, logic optimization, and machine-level performance tuning. We look for engineers who are passionate about the intersection of software engineering and mechanical execution, ensuring our systems operate with the highest level of reliability and output quality.

This guide is scoped to a Software Engineer candidate at Hya Tech.

Focus areas

• PLC (Programmable Logic Controller)
• PLC Programming
• VMC (Vertical Machining Center)

The Hya Tech interview process

Hya Tech candidates report 4 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Technical Screening

Initial assessment focusing on technical skills relevant to the Software Engineer role.

What to demonstrate

• Initial assessment focusing on technical skills relevant to the Software Engineer role
• Depth in PLC (Programmable Logic Controller)

How to prepare

• Answer aloud and timed: Explain the difference between various PLC scanning cycles.
• Answer aloud and timed: How do you optimize a VMC program to reduce cycle time while maintaining precision?

Project Experience Discussion

In-depth discussion about specific projects from your resume, including challenges and technical choices.

What to demonstrate

• In-depth discussion about specific projects from your resume
• Including challenges and technical choices

How to prepare

• Answer aloud and timed: Describe your process for troubleshooting a logic fault in an automated production line.
• Answer aloud and timed: Which communication protocols are you most comfortable implementing in an industrial environment?

Behavioral Interview

Exploration of your collaborative mindset and situational responses in a team environment.

What to demonstrate

• Exploration of your collaborative mindset and situational responses in a team environment
• Depth in PLC (Programmable Logic Controller)

How to prepare

• Prepare three examples from your own work, each with a decision you made and an outcome you can quantify.
• Re-read the description of the behavioral interview above and write down what you would ask to confirm before it.

Final Assessment

Comprehensive evaluation to assess overall fit and readiness for the role.

What to demonstrate

• Comprehensive evaluation to assess overall fit and readiness for the role
• Depth in PLC (Programmable Logic Controller)

How to prepare

• Answer aloud and timed: How do you ensure your code remains maintainable and readable for other engineers?
• Answer aloud and timed: Describe a situation where you had to debug a system under tight time constraints.

Where candidates lose points

Focus on the "Why

Don't just explain how you solved a problem; explain why you chose one approach over another.

Master your Resume

Every project you list is fair game for a deep-dive technical question.

Think Safety First

Always frame your technical solutions within the context of safety standards and protocols.

Questions & practice

Identify the heaviest tenants in a five-minute window under memory pressure

Medium · top-k · heavy hitters · streaming

The edge service handles about 3,000 requests per second across roughly 50,000 tenants, peaking near 9,000. Expose the 50 heaviest tenants by request count over the trailing five minutes so limits can be tightened before one tenant's backfill starves the fleet. You may not retain five minutes of raw records. Give the exact solution and its memory, then the bounded-memory approximation with its error stated as a formula, and say which you would ship and at what tenant cardinality that choice changes.

Approach

1. Do the exact version first, because it is affordable at this cardinality: a ring of 300 one-second counters per tenant, advanced lazily, is 1,200 bytes of counters per tenant and roughly 60 to 90 MB for 50,000 tenants with overhead. Carry a running total and subtract the bucket you overwrite so a window read is O(1) rather than 300 adds.
2. Extract the top 50 with a size-k min-heap over the tenant sums: O(d log k) for d tenants, against O(d log d) to sort them all. Maintaining the heap continuously instead of on query requires a tenant-to-heap-index map, because incrementing a count already inside the heap means sifting from a known position, and without that map you rebuild the heap on every request.
3. State the approximation precisely rather than gesturing at sketches. Misra-Gries with m counters retains every item whose true count exceeds N/(m+1), and each retained count underestimates the truth by at most N/(m+1). With m = 1,000 and N = 900,000 requests in the window the error is roughly 900 requests, which is fine for spotting a tenant sending 50,000 and useless for ranking two tenants 200 apart.
4. Say what breaks when the window slides: Misra-Gries and Space-Saving are insert-only and cannot be decremented as records age out. The workable construction is one summary per sub-window, say ten seconds, with 30 summaries merged at query time, and the merged error is the sum of the per-summary errors, so the bound degrades linearly in the number of sub-windows.

Follow-up

• The heaviest tenant is heavy because of one export job rather than user traffic. Should the limiter treat those as the same tenant?
• Two tenants sit tied at the boundary of the top 50. Does your answer flap, and does the flapping matter?

Canonicalise a request body into a stable idempotency fingerprint

Medium · parsing · canonicalisation · hashing

idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.

Approach

1. Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
2. Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
3. Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
4. Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.

Follow-up

• A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
• Where does the fingerprint get computed relative to request decompression and the body-size limit?

Collapse a redelivered event batch into per-aggregate high-water marks

Easy · hashing · at-least-once · aggregation

You drain a batch of up to 5,000,000 events, each (aggregate_id BIGINT, aggregate_version INT, event_type, payload). The log guarantees order within one aggregate only; the batch merges 64 partitions, and a relay failover has redelivered a range, so an older version for an aggregate can appear after a newer one. Given a map of last_applied_version per aggregate, produce the events worth applying, at most one per (aggregate_id, version), plus the count discarded. Target O(n) time. State the memory for 2,000,000 distinct aggregates and what you do when it does not fit.

Approach

1. One pass, one hash map from aggregate_id to the highest version kept, and a discard counter. An event whose version is at or below last_applied_version for its aggregate is dropped without further work, which is the whole reason the event carries its version rather than a delta. O(n) expected time, O(d) space in distinct aggregates.
2. Keep the maximum, never the last occurrence. The redelivered range means the final appearance of an aggregate in the batch can be an older version than one seen earlier in the same batch, so last-wins applies stale state over newer state and the projection regresses with no error anywhere.
3. Cost the memory instead of calling it large: an 8-byte key plus a 4-byte version is 12 bytes of payload, and an open-addressed table held at a 0.7 load factor costs roughly 17 bytes per entry before per-slot metadata, so 2,000,000 aggregates is tens of megabytes in a native layout and several times that in a runtime that boxes both key and value.
4. If the distinct set exceeds memory, partition on hash(aggregate_id) mod P and reduce each partition independently. Every event for one aggregate hashes to the same partition, so the per-partition result is exact and the merge is concatenation rather than a second reduction.

Follow-up

• The payload is a patch rather than a snapshot, so applying only the highest version loses the intermediate changes. What changes in your reduction?
• How do you detect that version 7 arrived while version 6 was never delivered, and what should the consumer do about the gap?

Explain why the owner filter ignores the listing index

Medium · composite index · query plans · sort elimination

The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.

Approach

1. Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
2. For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
3. Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
4. Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.

Follow-up

• 90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
• A dashboard runs this for 40 owners in one page load. What changes about the design?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

1. Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
2. Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
3. Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
4. State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.

Follow-up

• A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
• The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?

Explain the difference between various PLC scanning cycles.

Medium · Technical Domain Knowledge

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How do you optimize a VMC program to reduce cycle time while maintaining precision?

Medium · Technical Domain Knowledge

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

Which communication protocols are you most comfortable implementing in an industrial environment?

Medium · Technical Domain Knowledge

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How do you ensure your code remains maintainable and readable for other engineers?

Medium · Problem-Solving & Execution

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

What steps do you take to validate a new program before it goes live on production machinery?

Medium · Problem-Solving & Execution

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How do you balance the need for high-speed operation with the requirement for machine longevity?

Medium · Problem-Solving & Execution

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

Describe your process for troubleshooting a logic fault in an automated production line.

Medium · Technical Domain Knowledge

Approach

1. Establish what changed and when, before forming any theory.
2. Pick a bisection that eliminates candidates whichever way it turns out.
3. Check the instrumentation before believing the symptom.
4. Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

• What would you look at first, and what would it rule out?
• How would you tell a cause from a coincidence here?

Describe a situation where you had to debug a system under tight time constraints.

Medium · Problem-Solving & Execution

Approach

1. Establish what changed and when, before forming any theory.
2. Pick a bisection that eliminates candidates whichever way it turns out.
3. Check the instrumentation before believing the symptom.
4. Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

• What would you look at first, and what would it rule out?
• How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the rounds and topics Hya Tech candidates report.

Day 1 — Map the Hya Tech loop

• Write out the reported sequence: Technical Screening, Project Experience Discussion, Behavioral Interview, Final Assessment.
• For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 4 reported rounds, with the weakest marked.

Day 2 — Work PLC (Programmable Logic Controller)

• Spend the session on PLC (Programmable Logic Controller), which Hya Tech candidates report being tested on.
• Write one worked example in PLC (Programmable Logic Controller) and time yourself on it.

Deliverable: One timed worked example in PLC (Programmable Logic Controller).

Day 3 — Work PLC Programming

• Spend the session on PLC Programming, which Hya Tech candidates report being tested on.
• Write one worked example in PLC Programming and time yourself on it.

Deliverable: One timed worked example in PLC Programming.

Day 4 — Work VMC (Vertical Machining Center)

• Spend the session on VMC (Vertical Machining Center), which Hya Tech candidates report being tested on.
• Write one worked example in VMC (Vertical Machining Center) and time yourself on it.

Deliverable: One timed worked example in VMC (Vertical Machining Center).

Day 5 — Answer out loud: Technical Domain Knowledge

• Answer aloud, timed: Explain the difference between various PLC scanning cycles.
• Answer aloud, timed: How do you optimize a VMC program to reduce cycle time while maintaining precision?

Deliverable: Spoken answers to 2 reported Technical Domain Knowledge question(s), under time.

Day 6 — Answer out loud: Problem-Solving & Execution

• Answer aloud, timed: Tell me about a time you identified a bottleneck in a manufacturing process. What was your solution?
• Answer aloud, timed: How do you ensure your code remains maintainable and readable for other engineers?

Deliverable: Spoken answers to 2 reported Problem-Solving & Execution question(s), under time.

Day 7 — Dry run for Hya Tech

• Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

How do you handle safety interlocks when programming complex machinery?

Medium · Technical Domain Knowledge

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Tell me about a time you identified a bottleneck in a manufacturing process. What was your solution?

Medium · Problem-Solving & Execution

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Ship under a deadline and bound the debt you chose

Medium · pagination · technical debt · tradeoffs

You have four days to ship a tenant-facing listing endpoint. The version you would defend uses keyset pagination over (tenant_id, status, updated_at DESC, resource_id DESC); the version you can finish uses LIMIT/OFFSET with no matching index. Describe a deadline call you actually made of this shape: what you shipped, what you knowingly deferred, how you bounded the damage with a mechanism rather than an intention, and the specific numeric condition that would force the follow-up. Name who you told and where you wrote it down.

Approach

1. Name the deferred failure precisely instead of calling it slow. OFFSET n makes the database produce and discard n rows, so cost grows with page depth; without an index matching the sort, every matching row is read and sorted before the limit applies; and rows inserted between two page fetches shift across the boundary so items are skipped or repeated with nothing in the response to signal it.
2. Bound the blast radius with something mechanical rather than a promise: cap maximum page depth, cap page size, restrict the endpoint to one internal caller, or keep it behind a flag. State which failure each cap removes and which it leaves standing.
3. Attach a number to the trigger and wire it to an alarm: the first tenant crossing N resources, or the endpoint's p99 crossing its share of the 400 ms budget, so the debt announces itself instead of waiting to be remembered.
4. Write it where the next engineer looks, which is the code and the ticket, not a chat message: what was deferred, why, the cap, and the trigger.

Follow-up

• At what page depth does the offset version breach your latency budget, given your page size and row counts?
• What breaks first when you switch to keyset pagination later, and what does a client holding an old page token see?