Interview guides · Humana Italia Spa

Humana Italia Spa Software Engineer Interview Guide

Humana Italia Spa Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

As a Software Engineer at Humana Italia Spa, you are a critical architect of the digital solutions that empower our healthcare mission. You will be responsible for designing, developing, and maintaining robust software systems that streamline internal operations and enhance the quality of care for our users. This role sits at the intersection of complex data management and user-centric design, requiring a high degree of technical precision and an unwavering commitment to reliability. Your work will directly influence the scalability and performance of Humana Italia Spa's technology stack. Whether you are optimizing existing workflows, integrating cloud-based services, or troubleshooting high-stakes architectural challenges, your contributions ensure that our technological infrastructure remains responsive and secure.

This guide is scoped to a Software Engineer candidate at Humana Italia Spa.

Focus areas

Behavioral Interviews
Cloud Computing
Coding Assessments / OA

The Humana Italia Spa interview process

Humana Italia Spa candidates report 3 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

Gauge your background and interest in the position.

What to demonstrate

Gauge your background and interest in the position
Depth in Behavioral Interviews

How to prepare

Be able to walk your CV end to end in two minutes, and say why this company specifically.
Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Evaluations

Deeper assessments of your technical capabilities.

What to demonstrate

Deeper assessments of your technical capabilities
Depth in Behavioral Interviews

How to prepare

Answer aloud and timed: Why are you interested in the healthcare technology sector specifically?
Answer aloud and timed: Describe a time you worked under highly stressful conditions; how did you maintain your output?

Panel Interviews

Interviews with engineers, architects, and hiring managers to assess fit and skills.

What to demonstrate

Interviews with engineers, architects, and hiring managers to assess fit and skills
Depth in Behavioral Interviews

How to prepare

Answer aloud and timed: How do you stay updated with emerging technologies like AI, and how have you applied them?
Answer aloud and timed: Can you describe your experience with cloud platforms, specifically in troubleshooting and architecture?

Where candidates lose points

Prioritize Clarity

When answering technical questions, explain your thought process out loud. We are often more interested in how you reach a solution than the solution itself.

Be Prepared for Panels

You may be interviewed by multiple people simultaneously. Address your answers to the entire group, maintaining eye contact and ensuring everyone feels included.

Know Your Resume

You will be asked to explain specific decisions you made in past projects. Be ready to defend your technical choices and discuss the outcomes.

Research the Industry

Understanding the specific challenges of the healthcare sector, such as data privacy and compliance, will set you apart from other candidates.

Questions & practice

Find overlapping job attempts and peak concurrency from lease records

Medium · sweep line · intervals · leases

A day of job_run history yields about 50,000,000 attempt records: (job_run_id, job_type, attempt, started_at, finished_at which is NULL when the worker died, lease_expires_at). Leases expire on a clock, so a job that outran its lease ran twice. Produce (a) every job_run_id whose attempts overlapped in wall-clock time and (b) the peak number of simultaneously running attempts per job_type with the minute it occurred. Target O(n log n). State how you treat a NULL finished_at and what clock skew does to your answer.

Approach

Define the interval before sorting anything: an attempt occupies [started_at, COALESCE(finished_at, lease_expires_at)). finished_at is observed and lease_expires_at is only a promise, so every attempt without a finish contributes an estimate and the whole result is a lower bound on overlap rather than an exact count.
For peak concurrency, sweep: emit 2n endpoints, sort by (timestamp, kind) with ends ordered before starts at equal timestamps, then walk the sequence maintaining a counter per job_type and record each type's maximum with its timestamp. O(n log n) dominated by the sort, O(n) space, or O(1) extra if the sort is external and the walk streams.
For overlap detection, do not compare attempts pairwise. A single global sort by (job_run_id, started_at) gives both the grouping and the order; within a group, keep the maximum end seen so far and report an overlap exactly when the next start is less than that running maximum, which is one linear pass after the sort.
Half-open intervals matter and are easy to get wrong: with closed intervals an attempt ending at the same millisecond another begins reads as concurrency two, and across 50,000,000 records that artefact swamps the real signal.

Follow-up

A handler is not idempotent and you have found 400 overlapping jobs. Which of them actually caused damage, and what would you query to find out?
Peak concurrency for one job_type is 4 against a configured cap of 4. Is the cap working, or is the data hiding attempts that never started?

Canonicalise a request body into a stable idempotency fingerprint

Medium · parsing · canonicalisation · hashing

idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.

Approach

Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.

Follow-up

A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
Where does the fingerprint get computed relative to request decompression and the body-size limit?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

Denormalise tenant onto revisions and backfill it live

Hard · denormalisation · online migration · backfill

resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.

Approach

Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.

Follow-up

The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
How do you verify the backfill actually finished, given rows are still being inserted while it runs?

Explain why the owner filter ignores the listing index

Medium · composite index · query plans · sort elimination

The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.

Approach

Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.

Follow-up

90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
A dashboard runs this for 40 owners in one page load. What changes about the design?

What is your process for designing a scalable system architecture from the ground up?

Medium · Technical and Domain Knowledge

Approach

Fix the scope first: who calls this, how often, and what they do when it fails.
Name the read and write paths separately; they rarely have the same bottleneck.
Choose a partition key and say what query it makes expensive.
State the consistency you need, and where you are willing to be stale.

Follow-up

What breaks first when traffic grows ten times?
How does this behave when that dependency is down for an hour?

How do you ensure your code remains maintainable and efficient as project requirements evolve?

Medium · Technical and Domain Knowledge

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Explain your approach to debugging a complex UI issue in a production environment.

Medium · Technical and Domain Knowledge

Approach

Establish what changed and when, before forming any theory.
Pick a bisection that eliminates candidates whichever way it turns out.
Check the instrumentation before believing the symptom.
Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

What would you look at first, and what would it rule out?
How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the rounds and topics Humana Italia Spa candidates report.

Day 1 — Map the Humana Italia Spa loop

Write out the reported sequence: Initial Screening, Technical Evaluations, Panel Interviews.
For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 3 reported rounds, with the weakest marked.

Day 2 — Work Behavioral Interviews

Spend the session on Behavioral Interviews, which Humana Italia Spa candidates report being tested on.
Write one worked example in Behavioral Interviews and time yourself on it.

Deliverable: One timed worked example in Behavioral Interviews.

Day 3 — Work Cloud Computing

Spend the session on Cloud Computing, which Humana Italia Spa candidates report being tested on.
Write one worked example in Cloud Computing and time yourself on it.

Deliverable: One timed worked example in Cloud Computing.

Day 4 — Work Coding Assessments / OA

Spend the session on Coding Assessments / OA, which Humana Italia Spa candidates report being tested on.
Write one worked example in Coding Assessments / OA and time yourself on it.

Deliverable: One timed worked example in Coding Assessments / OA.

Day 5 — Answer out loud: Behavioral and Culture Fit

Answer aloud, timed: Tell me about a time you had to convince your teammates to adopt a new technical approach.
Answer aloud, timed: How do you manage conflict when working within a multi-disciplinary team?

Deliverable: Spoken answers to 2 reported Behavioral and Culture Fit question(s), under time.

Day 6 — Answer out loud: Technical and Domain Knowledge

Answer aloud, timed: Can you describe your experience with cloud platforms, specifically in troubleshooting and architecture?
Answer aloud, timed: How do you handle security concerns when designing interactions between APIs and user interfaces?

Deliverable: Spoken answers to 2 reported Technical and Domain Knowledge question(s), under time.

Day 7 — Dry run for Humana Italia Spa

Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.