Interview guides · Hostaway

Hostaway Software Engineer Interview Questions & Guide 2026

Concurrency drills for Hostaway software engineer prep: races, lock ordering, and what a check-then-act sequence assumes.

The 60-second brief

As a Software Engineer at Hostaway, you are joining a pivotal team dedicated to scaling the leading property management software for the vacation rental industry. Your work directly impacts how thousands of hosts and property managers automate their operations, manage bookings, and communicate with guests across global markets.

State every complexity claim with the assumption sitting under it. Hash lookup is O(1) on average and only for a hash that spreads your actual keys; comparison-based sorting cannot beat n log n, though counting or radix sort can when the keys are bounded integers.

Focus areas

Bound every outbound call with a timeout
Paginate large result sets with keyset cursors
Detect concurrent edits instead of losing writes

Overview

This role requires a blend of technical precision and pragmatic problem-solving. You will contribute to a complex, high-traffic platform, navigating the challenges of feature development, system reliability, and architectural optimization. Whether you are building new integrations or refining existing backend logic, your work is central to maintaining Hostaway’s competitive edge in a fast-paced, evolving industry.

The Hostaway interview process

Hostaway candidates report 3 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Recruiter Screen

The person on this call usually cannot evaluate your code and does not need to. They write a short paragraph, and that paragraph is what a hiring manager skims when deciding who to put on your loop. So the test is not whether your work was hard, it is whether a non-engineer can repeat it correctly. Name systems by what they did rather than by their internal codename, give each project a shape (what was breaking, what you changed, what happened after), and keep the whole walkthrough near ninety seconds. Depth that cannot survive a paraphrase reads as vagueness.

What to demonstrate

Whether a non-engineer can restate your projects without distorting them, since their paraphrase is what travels to the hiring manager, not your sentences
Whether each project has a shape rather than a stack list: the failure or constraint, the change you made, the result and how it was measured
Whether you can say what was yours inside a team project without either inflating it or disappearing into the plural

How to prepare

Rewrite each headline project as two sentences with no internal system names and no acronyms outside your company, then say them to someone outside engineering and have them repeat them back. Fix whatever came back wrong
Attach one measured number to each project: the baseline, the change, and the window it was measured over. Where nothing was ever measured, say that plainly rather than reaching for a plausible percentage
Time the background walkthrough against a clock. If it runs past two minutes, compress the earliest role to a single clause and spend the recovered time on the most recent one

Technical Assessment

Input bounds are the part of the prompt most often skimmed, and they usually contain the answer. They tell you which complexity class is admissible, which narrows the search before you have thought about the problem itself. As a rough planning figure, a compiled language does on the order of 10^8 simple operations per second and an interpreted one roughly an order of magnitude less. So n up to about twenty admits enumerating subsets, a few thousand admits a quadratic pass, and a million admits neither: you need near-linear, or linear with a log factor. If the bounds are missing, ask for them.

What to demonstrate

Whether the approach is justified by the stated input size rather than by whichever pattern you recognised first
Whether you ask about the properties that change the algorithm: whether the input arrives sorted, whether duplicates occur, whether values are bounded integers, whether it all fits in memory
Whether you can name the bottleneck in your own solution and what would remove it, even when you deliberately leave it in place
Whether a claimed speedup is real, since memoising a recursion only helps when subproblems genuinely overlap and the state can be keyed cheaply

How to prepare

For each algorithm you rely on, write down the largest n it handles in roughly a second, then check two of those figures by timing them in the language you will actually type in
For two weeks, write one line naming your target complexity and the bound that justifies it before you write any code, then compare that line with what you ended up submitting
Practise the conversion backwards: given a required O(n log n), list the mechanisms that get you there (sorting, a heap, an ordered map, divide and conquer) and choose by what the problem needs to query, not by what you used last

Technical Discussions

What this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.

What to demonstrate

Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly

How to prepare

Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live

Where candidates lose points

Assuming an isolation level prevents the anomaly you actually have

Isolation levels are named by the SQL standard but implemented differently, so any claim about one is only true of a named engine. PostgreSQL defaults to READ COMMITTED, where every statement takes a fresh snapshot, so two statements inside one transaction can legitimately disagree about the same row. Its REPEATABLE READ is snapshot isolation: it removes non-repeatable and phantom reads but permits write skew, where two transactions each read a set, each conclude their own write is safe, both commit, and the combined result violates a constraint that no single row expresses. Only SERIALIZABLE closes that, and it closes it by aborting a transaction with a serialization failure (SQLSTATE 40001), which means the guarantee is theoretical unless the application has a retry loop. InnoDB's REPEATABLE READ is a different mechanism again - plain SELECTs read a consistent snapshot while locking reads and writes see the latest committed row - so a read-modify-write inside one transaction can act on a value that the transaction's own earlier SELECT never returned.

Choosing an index from the columns a query mentions rather than from how it filters and orders

A composite B-tree index on (a, b, c) can be seeked only as a left prefix: equality on a, then equality on b, then a range or an ordering on c. A query that filters on b alone cannot seek into it at all and at best gets a full scan of the index; a query that filters a and ranges on b gets no benefit from c, because the index is only sorted by c within a fixed (a, b) pair. The practical consequence is that one index per column is close to useless for multi-predicate queries while a single correctly ordered composite index turns a scan into a lookup. The ordering half is what gets missed: if the index cannot satisfy the ORDER BY, the database must read every matching row and sort before the limit can apply, so a LIMIT 20 over a million matching rows still reads a million rows.

Naming no test cases at all

State what you would test before being asked: empty input, a single element, all elements equal, the maximum permitted size, and the input that exercises the branch you just wrote. It costs thirty seconds and is much of what separates someone who has shipped code from someone who has only solved puzzles.

Writing code before the input contract is pinned down

Before the first line, state the types, the size bounds, whether duplicates, negatives or an empty input are possible, whether the input is sorted, whether you may mutate it, and what the function returns when nothing matches. Every one of those answers changes the code, and discovering one at minute twenty costs a rewrite you no longer have time for.

Questions & practice

Diff a projection against the primary without per-row point reads

Hard · reconciliation · range hashing · throttling

The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.

Approach

Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.
Pin the comparison to a point in time or it reports lag as drift: consider only rows whose updated_at is older than now minus a lag margin, and re-check each candidate mismatch individually before repairing. At 1,200 writes per second a diff without this reports thousands of false positives, and an unattended repairer would then overwrite live rows with stale values.
Make the run resumable and throttled: batch by range key, persist the last completed range, and watch a signal such as replica lag or primary CPU, pausing rather than pressing on. A reconciliation that cannot be stopped and resumed gets killed halfway and restarted from zero, which is how a repair becomes an incident.

Follow-up

The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?
How would you run this continuously at low cost instead of only as incident response?

Merge partitioned event streams into one ordered feed with bounded lateness

Hard · k-way merge · watermarks · out-of-order streams

The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.

Approach

Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.
Choose the late-event policy from what the projection is keyed on. The projection upserts on (aggregate_id, aggregate_version) and discards a version it has already applied, so a late event is safe to apply out of order and correctness never depended on the merge at all. Apply it, recompute the affected feed page, and count lateness so the 30-second budget can be re-derived from data rather than folklore.
Say what the merge does not buy: ordering is guaranteed within one aggregate by the log's partitioning, and no watermark makes the cross-aggregate order authoritative. Two events from different aggregates in the same millisecond have no true order, so the feed's order is a presentation choice that must be stable rather than correct.

Worked solution (35 min)

Write the heap comparator on (occurred_at, event_id) and the per-partition head refill.
Write the watermark computation and the emit-loop condition, then list which buffered events are held at a chosen instant.
Compute the buffer at 4,000 events per second, 30 seconds and 1 KB per event, and state what fraction of a worker's heap that represents.
Add the idle-partition marker and trace the watermark with one silent partition, both with and without the marker.
Write the late-event path and name the key that makes applying it safe.

Expected result: A 64-way min-heap merge at O(n log P) with a deterministic (occurred_at, event_id) comparator, a watermark of the per-partition minimum less 30 seconds gating emission, a stated buffer of 120,000 events and roughly 120 MB, idle markers so a silent partition cannot freeze the watermark, and a late-event policy justified by the projection's idempotency on (aggregate_id, aggregate_version).

Verify it yourself

Feeding the partitions in an adversarial interleaving produces the same output sequence as feeding them in timestamp order.
Silencing one partition stalls output without the idle marker and does not stall it with the marker.
Applying a late event twice leaves the projection byte-identical, which is what permits the out-of-order path to exist.

Follow-up

The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?
One partition is ten minutes behind because its producer is slow. Do you stall the feed or emit without it?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.
Expire idle destinations, or memory grows with every destination ever seen rather than with the live set. Hold the rings in a bounded LRU keyed on destination_id and treat a miss as no history, which is the correct default for an endpoint that has been silent for a minute.
Keep the half-open probe out of the window arithmetic. After the circuit opens, one probe per interval decides whether to close it, and folding that single success into a window that still holds a 100 percent failure history would reopen the destination on one data point.

Follow-up

The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?
How would you make the window survive a process restart, and is it worth the cost?

Replace offset paging on the resource feed with keyset

Easy · keyset pagination · composite index · sort order

resource holds resource_id, tenant_id, owner_user_id, title, body_ref, version, status ('draft','active','archived','deleted'), created_at, updated_at, deleted_at, with an index on (tenant_id, status, updated_at DESC, resource_id DESC). The listing endpoint returns active resources for one tenant, newest update first, 50 per page, today with LIMIT 50 OFFSET n. Tenants reach page 400 and rows are created while they read. Write the keyset query, define what the cursor carries and how it is encoded, and say which part of the index each predicate uses. Assume PostgreSQL 16.

Approach

Name the two failures separately. OFFSET 20000 makes the server produce and discard 20,000 rows, so page cost grows with depth rather than with page size. Independently, any write that changes how many rows sort above the offset moves the window between two fetches, and the direction decides which anomaly you get: an insert lands at the head of updated_at DESC and pushes already-returned rows down past the boundary, so they are returned a second time; a delete above the offset, or a row whose updated_at is bumped above the cursor, pulls rows up and one is never returned at all. Nothing in the response reveals either.
Write the seek: WHERE tenant_id = $1 AND status = 'active' AND (updated_at, resource_id) < ($2, $3) ORDER BY updated_at DESC, resource_id DESC LIMIT 50. The row-value comparison is one index range rather than a disjunction, and both columns are NOT NULL, which is what makes that comparison well defined.
Map each predicate onto the index: tenant_id and status are equality on the leading columns, (updated_at, resource_id) is the range, and the ORDER BY matches the index order so no Sort node appears and the scan stops after 50 rows. The DESC in the definition only matters for mixed directions — a plain ascending btree on the same columns is read backwards for this query.
Put both sort columns in the cursor and nothing the client can tamper with into another tenant: base64 of (updated_at, resource_id), validated server-side, with tenant_id taken from the principal.
State the residual honestly. Keyset is stable against concurrent inserts and deletes, but not against a row whose updated_at changes mid-scroll — that row moves in the ordering and can be seen twice. If the feed must be a snapshot, order by an immutable key or bound the page set with updated_at <= the cursor's start value.
Keep a total out of the page path. A tenant-wide COUNT(*) is the scan keyset just removed; fetch LIMIT 51 and return has_more instead.

Worked solution (25 min)

Seed one tenant with 500k active resources, 2% of them sharing an identical updated_at.
Time LIMIT 50 OFFSET 0 against OFFSET 20000 and record rows-read from EXPLAIN (ANALYZE, BUFFERS) for each.
Page the whole set with the keyset query while an insert-only writer adds 100 rows/second, collecting resource_ids, and repeat the run with OFFSET.
Repeat both runs under a second writer profile that also deletes 20 rows/second from pages already returned and bumps updated_at on 20 more, and diff each collected id set against the rows that existed for the whole run.
Remove resource_id from the cursor so the seek degrades to updated_at < $2, and re-run the tie-heavy section of the feed.

Expected result: Keyset reads about 50 index entries per page and its latency is flat from page 1 to page 10,000; under both writer profiles the collected ids contain no duplicate and omit no row that existed for the whole scroll. OFFSET at page 400 reads 20,050 rows to return 50. Under the insert-only writer it repeats rows and skips none — an insert can only push a row down past the boundary — and only the second profile, whose deletes and updated_at bumps move rows up past the cursor, also makes it skip. Without the tie-break, the seek is updated_at < $2, which drops every still-unread row sharing the boundary timestamp.

Verify it yourself

EXPLAIN shows an Index Scan with no Sort node — a Sort means the ORDER BY is not satisfied by the index.
Buffers read per page stays constant as page depth grows.
Ids collected across the scroll are unique, and complete for rows untouched during the run.

Follow-up

The client asks for 'jump to page 400'. What do you offer instead, and what does the honest version cost?
Sort order becomes user-selectable across four columns. How many indexes is that, and which would you refuse to add?
What does the cursor do when the row it points at has since been deleted?

Denormalise tenant onto revisions and backfill it live

Hard · denormalisation · online migration · backfill

resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.

Approach

Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.
Step three, backfill: batch by primary key rather than by created_at so the cursor is dense and resumable — UPDATE resource_revision rr SET tenant_id = r.tenant_id FROM resource r WHERE r.resource_id = rr.resource_id AND rr.revision_id > $1 AND rr.revision_id <= $1 + 5000 AND rr.tenant_id IS NULL — committing per batch and persisting the cursor. Throttle on replica replay lag and on dead-tuple count, since each batch writes 5,000 new row versions. Run the backfill before the index exists so those updates can stay HOT.
Step four, index then enforce then contract: CREATE INDEX CONCURRENTLY (cannot run inside a transaction block, scans the table twice, waits on open transactions, and leaves an INVALID index to drop concurrently if it fails); ADD CONSTRAINT ... CHECK (tenant_id IS NOT NULL) NOT VALID, then VALIDATE CONSTRAINT, which takes only SHARE UPDATE EXCLUSIVE, after which SET NOT NULL uses the validated check instead of re-scanning on PostgreSQL 12 and later. Only then move the audit reads onto the column and, in a later deploy, delete the join path.

Follow-up

The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
How do you verify the backfill actually finished, given rows are still being inserted while it runs?
A resource must now be movable between tenants. What does that do to the composite foreign key and to the revisions already written?

What specific value do you believe you can contribute to our engineering team?

Medium

Approach

Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.
State your assumptions explicitly before working the problem.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

How do you approach starting a new initiative or project?

Medium

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

In which circumstances would you choose to adopt a new technology?

Medium

Approach

State your assumptions explicitly before working the problem.
Clarify what is being asked and what a complete answer contains.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Relay committed events to the log without gaps or reordering

Medium · transactional outbox · at-least-once · ordering · leases

outbox_event rows are written in the same transaction as the state change and carry aggregate_type, aggregate_id, aggregate_version, payload and status, with a partial index on (created_at, event_id) WHERE status = 'pending'. The relay publishes about 4k events/second to a partitioned append-only log keyed by aggregate_id, with one leader per partition range holding a lease. Consumers must never miss an event; they may see one twice. Design the claim-publish-mark loop, and state exactly what consumers observe when a leader's lease expires while it is mid-batch.

Approach

Claim with SELECT ... WHERE status='pending' ORDER BY created_at, event_id LIMIT $batch FOR UPDATE SKIP LOCKED inside a transaction. SKIP LOCKED lets several relay workers share a range without serialising on each other's rows, and the partial index keeps the claim proportional to the backlog rather than to a table that is overwhelmingly published rows. At 4k/second a batch of 500 is eight claims per second, each an index scan of 500 entries.
Publish before marking, never the reverse, and say why it is a choice. Marking first loses the event outright if the process dies in the gap, and the loss is silent - nothing remains to retry, and it surfaces later as a projection missing a row. Publishing first can repeat the event, and repetition is what every consumer is already built to survive. That single ordering is the whole at-least-once guarantee.
Preserve the only ordering on offer. Partition by aggregate_id and never publish two events for one aggregate concurrently: claim in (created_at, event_id) order and publish sequentially within an aggregate, or hash aggregate_id to a worker slot. Order across aggregates is not available at any price here, which is why the event carries aggregate_version and the full fact rather than a delta - a consumer can then discard what it has already applied without coordinating with anyone.
State the failover behaviour precisely, because it is the consistency-versus-availability decision in this design. A lease expires because the holder is slow, and no mechanism distinguishes that from dead, so for the length of the lease window two leaders can publish the same claimed batch. The system accepts duplicates to avoid stalling publication for every aggregate in the range whenever one worker pauses. Consumers deduplicate on (aggregate_id, aggregate_version) and drop anything at or below what they have applied.
Bound the failure paths and pick the right alarm. A row that fails to publish increments attempts, records last_error, and moves to 'dead' after a limit so one poison payload cannot block the backlog behind it. Alert on the age of the oldest pending row, not on the relay's error rate: the failure worth catching is a relay reporting itself healthy while nothing is being published.

Worked solution (25 min)

Write the claim statement and check it against the partial index: which columns it seeks on, how many entries it touches, and what two concurrent workers do to each other.
Write both orderings of publish and mark, and for each state what exists after a crash at every point in the loop.
Write the consumer's dedupe rule on (aggregate_id, aggregate_version) and test it against a replayed batch of 500.
Compute the backlog after a 40-minute outage and the batch rate needed to drain it while 4k/second continues to arrive.

Expected result: A claim using FOR UPDATE SKIP LOCKED over the partial index in (created_at, event_id) order, publish to the aggregate_id partition, then mark published - in that order, accepting duplicates on lease expiry. Per-aggregate order is preserved by never publishing an aggregate concurrently; cross-aggregate order is explicitly not guaranteed. Failures increment attempts and terminate at 'dead'. The alarm is the age of the oldest pending row.

Verify it yourself

Killing the relay mid-batch produces duplicates on restart and no gap.
The claim query's plan uses the partial index and reads at most batch-size entries regardless of table size.
Two relay workers on the same range never block on each other's rows.
Events for one aggregate_id arrive in aggregate_version order, and no consumer relies on order across aggregates.

Follow-up

The relay is down 40 minutes and 9.6 million rows are pending. What does catch-up do to the primary, and what changes in the claim loop to survive it?
A consumer insists it never received an event. Which single query settles whether the relay lost it, and what does each answer look like?
Delivery is at-least-once. What would exactly-once require end to end, and why is that a property of the consumer rather than of the relay?

Every query on one table stalls for forty seconds mid-deploy

Medium · lock contention · ddl · migrations · postgres

During a release on PostgreSQL, every query touching resource times out for about 40 seconds and then recovers with no intervention. The release ran one migration, ALTER TABLE resource ADD COLUMN archived_reason TEXT, and the migration log shows it completing in 6 ms. Unrelated tables showed no change in error rate. Explain how a 6 ms statement caused a 40-second stall, give the ordered checks you would run on a live system to confirm it, and give the migration procedure that prevents a repeat.

Approach

Separate the statement's duration from the lock's duration. ADD COLUMN with no default is a catalogue-only change and genuinely runs in milliseconds, but it requires ACCESS EXCLUSIVE, and it cannot acquire that until every transaction already touching the table has finished.
Account for the queueing, which is the part that surprises people. A lock request that is waiting blocks later requests for conflicting modes behind it rather than letting them overtake, so one long-open transaction holds the DDL and the DDL holds all the traffic. The stall length is set by the longest open transaction, not by the size of the change.
Confirm on a live system in this order: pg_stat_activity for that table ordered by xact_start, looking for the oldest transaction and specifically for state = idle in transaction; then pg_locks where granted = false to find the waiter; then join them on pid to name blocker and blocked. pg_blocking_pids() does that join for you and is the fastest single call.
Prevent rather than merely time it better. Set lock_timeout to a second or two on the migration session so the DDL abandons the queue after a bounded wait and is retried, instead of holding it for as long as the oldest transaction lives. Be exact about what that buys: queries arriving during the wait still queue behind the pending ACCESS EXCLUSIVE request, so each attempt costs them up to one lock_timeout of added latency. The outage goes from 40 seconds to about one second per attempt, not to zero. Also run migrations away from deploy-time peaks, and put a statement timeout and an idle-in-transaction timeout on the analytics role that opens the long transactions.
Know the lock each change takes, since the mitigation differs by change. A column with a non-volatile default is a metadata-only change from PostgreSQL 11 and still needs the brief ACCESS EXCLUSIVE; an index needs CREATE INDEX CONCURRENTLY, which cannot run inside a transaction block and leaves an INVALID index to drop if it fails; a check or foreign key is added NOT VALID and then VALIDATE CONSTRAINT as a separate statement under a weaker lock.

Follow-up

The same release also wants NOT NULL on that column. What is the sequence that gets there without a long lock?
Your lock_timeout retry fails ten times in a row because the analytics transaction is always open. What do you change?
How does this differ on MySQL with InnoDB online DDL, and what is the equivalent of the waiting-lock queue there?

Suggested practice checklist

Day one measures instead of guessing, under a fixed rubric, and the remaining hours are allocated in proportion to the gaps before any studying begins. The allocation is deliberately not renegotiated midweek, because the area that feels worst on day three is usually the one that is moving.

Day 1 — Diagnostic, scored before you study anything

Sit a 110-minute diagnostic in four blocks: forty-five minutes on two coding problems, twenty-five on one design prompt taken to interface and data model, twenty of short-answer fundamentals, and twenty delivering two behavioural answers aloud.
Score each block from 0 to 3 on a fixed rubric where 3 is correct and fluent, 2 is correct but slow or prompted, 1 is partially correct and 0 is stuck, grading the artifact rather than how the attempt felt.
Allocate days two to five in proportion to 3 minus each block's score, write the allocation down, and commit to leaving it alone.

Deliverable: A scored rubric and a fixed hour allocation for the rest of the week.

Day 2 — Largest gap: find the boundary rather than the subject

Split the weakest area into named sub-skills and rate each separately. For coding those are restating the problem, choosing the structure, stating the invariant, turning the invariant into loop bounds, handling empty and single-element input, and accounting for complexity out loud.
Attempt three items positioned just above where the rating drops off, and for each write the first move you failed to make.
Re-attempt one of them from blank four hours later with nothing open.

Deliverable: A sub-skill map with the two blocking sub-skills circled.

Day 3 — Drill the blocking sub-skill by repeating the shape

Do eight short repetitions of the same shape rather than eight different problems, so what gets practised is the pattern and not the puzzle.
State the rule you now hold in one sentence, then test it against a case built to break it, a sliding window over an array containing negative values, or a cache-aside read path whose invalidation message is dropped.
Have someone else read your one-sentence rule and find the precondition you left out.

Deliverable: One rule statement with its preconditions attached and one counterexample that would have caught the incomplete version.

Day 4 — Second gap, plus maintenance on the strongest area

Run the same sub-skill decomposition on the second-largest gap in half the time.
Spend twenty-five timed minutes on the block you scored highest, choosing the hardest item you can still finish rather than a warm-up.
Write whether each area fails you on recall, on setup, or on execution, and set the fix accordingly: repetition for recall, a written checklist for setup, timed work for execution.

Deliverable: A second sub-skill map plus a one-line failure diagnosis for each area.

Day 5 — The gap that is not a skill

Record one technical and one behavioural answer, then count two things in the playback: seconds before your first clarifying question, and sentences you began without knowing where they would end.
Practise saying that you do not know, followed by how you would find out, without letting it soften into a guess, and practise stating a complexity or an estimate before being asked for it.
Redeliver one answer under a hard ninety-second cap, which forces structure ahead of detail.

Deliverable: Two recordings with a counted reduction in time-to-first-question.

Day 6 — Retest under day-one conditions

Sit the same 110-minute structure with new prompts of comparable difficulty and score it on the identical rubric.
For any block that did not move, change the method rather than adding hours: a block stuck at 1 usually means the practice was too varied, not too short.
Write down which single block you would still lose the offer on.

Deliverable: A second scored rubric placed beside the first, with one named remaining risk.

Day 7 — Full loop under interview conditions

Run a sixty-minute mock over the two blocks that moved least, with an interviewer briefed to interrupt and change direction mid-answer.
Write the recovery script for going blank: restate the question, state your assumption, name the first thing you would check.
Say every rule from the week aloud without reading it, and cut any you cannot state in a single sentence, since a rule you have to reconstruct mid-answer will not survive an interruption.

Deliverable: A one-page card holding the recovery script and only the rules you could state from memory.

Risky changes and the reversal path

For anything that touched live traffic, be ready to say how you would have undone it: a flag, a staged rollout, dual writes with the old path still authoritative. Once the old column is dropped or the source rows are overwritten there is no reverse, so name what you kept a copy of and for how long.

Can you explain your experience with specific web frameworks?

Medium · behavioural and engineering judgement

Approach

Give the blast radius: what could have broken, and what you measured.
Pick a story where you made the decision, not one where you watched it.
Close with what you would do differently, concretely.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

How do you handle deep technical questions regarding language-specific quirks?

Medium · behavioural and engineering judgement

Approach

Close with what you would do differently, concretely.
State the situation in two sentences and spend the rest on the reasoning.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

Ship under a deadline and bound the debt you chose

Medium · pagination · technical debt · tradeoffs

You have four days to ship a tenant-facing listing endpoint. The version you would defend uses keyset pagination over (tenant_id, status, updated_at DESC, resource_id DESC); the version you can finish uses LIMIT/OFFSET with no matching index. Describe a deadline call you actually made of this shape: what you shipped, what you knowingly deferred, how you bounded the damage with a mechanism rather than an intention, and the specific numeric condition that would force the follow-up. Name who you told and where you wrote it down.

Approach

Name the deferred failure precisely instead of calling it slow. OFFSET n makes the database produce and discard n rows, so cost grows with page depth; without an index matching the sort, every matching row is read and sorted before the limit applies; and rows inserted between two page fetches shift across the boundary so items are skipped or repeated with nothing in the response to signal it.
Bound the blast radius with something mechanical rather than a promise: cap maximum page depth, cap page size, restrict the endpoint to one internal caller, or keep it behind a flag. State which failure each cap removes and which it leaves standing.
Attach a number to the trigger and wire it to an alarm: the first tenant crossing N resources, or the endpoint's p99 crossing its share of the 400 ms budget, so the debt announces itself instead of waiting to be remembered.
Write it where the next engineer looks, which is the code and the ticket, not a chat message: what was deferred, why, the cap, and the trigger.
Report what actually happened in your real example, including the case where the trigger never fired and the debt was correctly never repaid.

Follow-up

At what page depth does the offset version breach your latency budget, given your page size and row counts?
What breaks first when you switch to keyset pagination later, and what does a client holding an old page token see?
Who would have overruled you if you had asked for two more days, and did you ask?