Interview guides · Hindusthan Electric House

Hindusthan Electric House Software Engineer Interview Guide

Hindusthan Electric House Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

The role of a Software Engineer at Hindusthan Electric House is uniquely positioned at the intersection of traditional electrical engineering and modern digital solutions. You will be responsible for developing and maintaining the software systems that drive the operational efficiency of the company’s manufacturing and electrical infrastructure. This is not a typical pure-software role; it requires a deep appreciation for the hardware, control systems, and industrial machinery that form the backbone of the organization. Your work will directly impact the reliability and performance of critical industrial components, including circuit breakers, synchronous machines, and various instrumentation systems.

This guide is scoped to a Software Engineer candidate at Hindusthan Electric House.

Focus areas

Electrical Power Concepts (Real, Apparent, Complex Power)
Instrumentation - Thermocouples (Principle)
Power Factor

The Hindusthan Electric House interview process

Hindusthan Electric House candidates report 4 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

Review of candidate credentials to determine eligibility for further assessment.

What to demonstrate

Review of candidate credentials to determine eligibility for further assessment
Depth in Electrical Power Concepts (Real, Apparent, Complex Power)

How to prepare

Be able to walk your CV end to end in two minutes, and say why this company specifically.
Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Aptitude Test

Standardized test administered through external vendors to evaluate general aptitude.

What to demonstrate

Standardized test administered through external vendors to evaluate general aptitude
Depth in Electrical Power Concepts (Real, Apparent, Complex Power)

How to prepare

Answer aloud and timed: What is the working principle of a synchronous machine?
Answer aloud and timed: How does a Buchholz relay function within a system?

Technical Interview

Face-to-face interview focusing on technical depth and practical engineering skills.

What to demonstrate

Face-to-face interview focusing on technical depth and practical engineering skills
Depth in Electrical Power Concepts (Real, Apparent, Complex Power)

How to prepare

Answer aloud and timed: Can you explain the differences between servo motors and induction motors?
Answer aloud and timed: What are the principles behind thermocouple operation?

HR Interview

Discussion with HR to assess cultural fit and behavioral alignment with the company.

What to demonstrate

Discussion with HR to assess cultural fit and behavioral alignment with the company
Depth in Electrical Power Concepts (Real, Apparent, Complex Power)

How to prepare

Answer aloud and timed: How do you manage calibration for flow, level, and pressure transmitters?
Answer aloud and timed: What are the operating ranges and applications for air circuit breakers?

Where candidates lose points

Review your resume

Be prepared to answer questions about every project listed on your resume in detail.

Master the basics

Refresh your knowledge on standard electrical and mechanical laws; these are the most common technical "gatekeepers."

Focus on the 'Why'

When explaining a project, focus on the rationale behind your technical choices rather than just the implementation.

Be professional and clear

The interviewers value direct, honest communication over jargon.

Questions & practice

Merge partitioned event streams into one ordered feed with bounded lateness

Hard · k-way merge · watermarks · out-of-order streams

The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.

Approach

Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.

Follow-up

The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?

Collapse a redelivered event batch into per-aggregate high-water marks

Easy · hashing · at-least-once · aggregation

You drain a batch of up to 5,000,000 events, each (aggregate_id BIGINT, aggregate_version INT, event_type, payload). The log guarantees order within one aggregate only; the batch merges 64 partitions, and a relay failover has redelivered a range, so an older version for an aggregate can appear after a newer one. Given a map of last_applied_version per aggregate, produce the events worth applying, at most one per (aggregate_id, version), plus the count discarded. Target O(n) time. State the memory for 2,000,000 distinct aggregates and what you do when it does not fit.

Approach

One pass, one hash map from aggregate_id to the highest version kept, and a discard counter. An event whose version is at or below last_applied_version for its aggregate is dropped without further work, which is the whole reason the event carries its version rather than a delta. O(n) expected time, O(d) space in distinct aggregates.
Keep the maximum, never the last occurrence. The redelivered range means the final appearance of an aggregate in the batch can be an older version than one seen earlier in the same batch, so last-wins applies stale state over newer state and the projection regresses with no error anywhere.
Cost the memory instead of calling it large: an 8-byte key plus a 4-byte version is 12 bytes of payload, and an open-addressed table held at a 0.7 load factor costs roughly 17 bytes per entry before per-slot metadata, so 2,000,000 aggregates is tens of megabytes in a native layout and several times that in a runtime that boxes both key and value.
If the distinct set exceeds memory, partition on hash(aggregate_id) mod P and reduce each partition independently. Every event for one aggregate hashes to the same partition, so the per-partition result is exact and the merge is concatenation rather than a second reduction.

Follow-up

The payload is a patch rather than a snapshot, so applying only the highest version loses the intermediate changes. What changes in your reduction?
How do you detect that version 7 arrived while version 6 was never delivered, and what should the consumer do about the gap?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

Why do you want to join Hindusthan Electric House?

Medium · Behavioral & General Aptitude

Approach

Name the grain you start from and join outward from it.
Check whether any join is one-to-many before aggregating, or the sums inflate.
Say which index the query would use, and what makes it unusable.
Handle the rows that do not match: that is usually the actual question.

Follow-up

How does the query change if that join becomes one-to-many?
What happens to this when the table is ten times larger?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.

Follow-up

A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?