Gstek Software Engineer Interview Guide

The 60-second brief

As a Software Engineer at Gstek, you serve as a pivotal member of a dedicated design and integration team responsible for high-stakes test systems. You are not just writing code; you are building the infrastructure that enables the engineering, design, and integration of complex Radio Frequency (RF) data acquisition test systems. Your work directly impacts the readiness of fleet forces and the performance of critical defense technology, including radar, Electronic Warfare, and communication systems. This role requires a unique intersection of software development and systems engineering. You will be expected to bridge the gap between abstract technical requirements and physical hardware performance, often working in test facilities or supporting shipyard installations.

This guide is scoped to a Software Engineer candidate at Gstek.

Focus areas

• C++
• RF Data Acquisition
• C

Where to focus your preparation

No round sequence has been reported for Gstek. Confirm the format with your recruiter.

Preparation focus

No round sequence has been reported for this company, so confirm the format with your recruiter and work the reported questions below.

What to demonstrate

• Breadth across the topics this company reports testing
• Whether you confirm the format before preparing for it

How to prepare

• Ask the recruiter for the sequence, the duration of each stage and whether you will be writing code
• Work the reported questions below and time yourself

Where candidates lose points

Own your projects

When discussing your experience, use the "STAR" method (Situation, Task, Action, Result) to keep your answers concise and impactful.

Highlight your documentation skills

In this role, your documentation is as important as your code. Mention how you keep your technical records clean and accessible for your team.

Prepare for the physical aspect

Show enthusiasm for the hands-on nature of the job. Mentioning your comfort with field environments can set you apart from candidates who only have office-based software experience.

Questions & practice

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

1. Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
2. Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
3. State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
4. Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

• The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
• A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

Identify the heaviest tenants in a five-minute window under memory pressure

Medium · top-k · heavy hitters · streaming

The edge service handles about 3,000 requests per second across roughly 50,000 tenants, peaking near 9,000. Expose the 50 heaviest tenants by request count over the trailing five minutes so limits can be tightened before one tenant's backfill starves the fleet. You may not retain five minutes of raw records. Give the exact solution and its memory, then the bounded-memory approximation with its error stated as a formula, and say which you would ship and at what tenant cardinality that choice changes.

Approach

1. Do the exact version first, because it is affordable at this cardinality: a ring of 300 one-second counters per tenant, advanced lazily, is 1,200 bytes of counters per tenant and roughly 60 to 90 MB for 50,000 tenants with overhead. Carry a running total and subtract the bucket you overwrite so a window read is O(1) rather than 300 adds.
2. Extract the top 50 with a size-k min-heap over the tenant sums: O(d log k) for d tenants, against O(d log d) to sort them all. Maintaining the heap continuously instead of on query requires a tenant-to-heap-index map, because incrementing a count already inside the heap means sifting from a known position, and without that map you rebuild the heap on every request.
3. State the approximation precisely rather than gesturing at sketches. Misra-Gries with m counters retains every item whose true count exceeds N/(m+1), and each retained count underestimates the truth by at most N/(m+1). With m = 1,000 and N = 900,000 requests in the window the error is roughly 900 requests, which is fine for spotting a tenant sending 50,000 and useless for ranking two tenants 200 apart.
4. Say what breaks when the window slides: Misra-Gries and Space-Saving are insert-only and cannot be decremented as records age out. The workable construction is one summary per sub-window, say ten seconds, with 30 summaries merged at query time, and the merged error is the sum of the per-summary errors, so the bound degrades linearly in the number of sub-windows.

Follow-up

• The heaviest tenant is heavy because of one export job rather than user traffic. Should the limiter treat those as the same tenant?
• Two tenants sit tied at the boundary of the top 50. Does your answer flap, and does the flapping matter?

Collapse a redelivered event batch into per-aggregate high-water marks

Easy · hashing · at-least-once · aggregation

You drain a batch of up to 5,000,000 events, each (aggregate_id BIGINT, aggregate_version INT, event_type, payload). The log guarantees order within one aggregate only; the batch merges 64 partitions, and a relay failover has redelivered a range, so an older version for an aggregate can appear after a newer one. Given a map of last_applied_version per aggregate, produce the events worth applying, at most one per (aggregate_id, version), plus the count discarded. Target O(n) time. State the memory for 2,000,000 distinct aggregates and what you do when it does not fit.

Approach

1. One pass, one hash map from aggregate_id to the highest version kept, and a discard counter. An event whose version is at or below last_applied_version for its aggregate is dropped without further work, which is the whole reason the event carries its version rather than a delta. O(n) expected time, O(d) space in distinct aggregates.
2. Keep the maximum, never the last occurrence. The redelivered range means the final appearance of an aggregate in the batch can be an older version than one seen earlier in the same batch, so last-wins applies stale state over newer state and the projection regresses with no error anywhere.
3. Cost the memory instead of calling it large: an 8-byte key plus a 4-byte version is 12 bytes of payload, and an open-addressed table held at a 0.7 load factor costs roughly 17 bytes per entry before per-slot metadata, so 2,000,000 aggregates is tens of megabytes in a native layout and several times that in a runtime that boxes both key and value.
4. If the distinct set exceeds memory, partition on hash(aggregate_id) mod P and reduce each partition independently. Every event for one aggregate hashes to the same partition, so the per-partition result is exact and the merge is concatenation rather than a second reduction.

Follow-up

• The payload is a patch rather than a snapshot, so applying only the highest version loses the intermediate changes. What changes in your reduction?
• How do you detect that version 7 arrived while version 6 was never delivered, and what should the consumer do about the gap?

Explain why the owner filter ignores the listing index

Medium · composite index · query plans · sort elimination

The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.

Approach

1. Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
2. For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
3. Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
4. Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.

Follow-up

• 90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
• A dashboard runs this for 40 owners in one page load. What changes about the design?

Keep soft-deleted accounts from blocking re-registration

Easy · soft delete · unique constraints · engine differences

app_user holds user_id, tenant_id, email CITEXT, password_hash (NULL for SSO principals), email_verified_at, auth_version, status ('invited','active','suspended','deactivated'), created_at, updated_at, deleted_at. Two live accounts for one address inside a tenant must be impossible, but an address freed by a soft delete must be reusable, and the same tenant may delete and re-register it repeatedly. Write the uniqueness DDL for PostgreSQL 16, then the equivalent for MySQL 8 where partial indexes do not exist, and say what each permits once three deleted rows already hold that address.

Approach

1. Start from what is actually unique: not (tenant_id, email), but (tenant_id, email) among live rows. PostgreSQL says that directly — CREATE UNIQUE INDEX app_user_live_email ON app_user (tenant_id, email) WHERE deleted_at IS NULL. A full constraint over the same two columns burns the address permanently the first time someone deletes an account.
2. Keep case-insensitivity in the type or the index, never in the application: CITEXT as given, or UNIQUE (tenant_id, lower(email)) as an expression index where the extension is unavailable. A case-sensitive unique column is exactly how two accounts for one human appear.
3. For MySQL 8 the predicate has to move inside the key: add a discriminator column that is a constant 0 while the row is live and is set to user_id on delete, with UNIQUE (tenant_id, email, deleted_marker). Live rows share the constant and still collide; deleted rows differ from each other and stop colliding.
4. State the NULL variant and its dependency: leaving the marker NULL for deleted rows also works, because a unique index treats NULLs as distinct — true in MySQL, and true in PostgreSQL only under the default NULLS DISTINCT, which PostgreSQL 15 lets you reverse. Check the polarity against the three existing deleted rows: constant-on-live is what preserves the collision you want, and reversing it silently admits duplicate live accounts.

Follow-up

• A deleted account re-registers with the same address the next day. Do the old resource rows follow the new user_id, and how does the API keep the two principals apart?
• How do you honour an erasure request while resource_revision.actor_user_id still references this table?

How have you utilized C, C++, or Java to manage instrumentation control in previous projects?

Medium · Technical and Domain Proficiency

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How do you ensure your code remains maintainable and scalable within a long-term SDLC?

Medium · Technical and Domain Proficiency

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

How do you approach debugging software that interacts directly with physical RF hardware?

Medium · Technical and Domain Proficiency

Approach

1. Establish what changed and when, before forming any theory.
2. Pick a bisection that eliminates candidates whichever way it turns out.
3. Check the instrumentation before believing the symptom.
4. Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

• What would you look at first, and what would it rule out?
• How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the topics and questions Gstek candidates report; no round sequence has been reported.

Day 1 — Establish the Gstek format

• No round sequence has been reported, so ask your recruiter for the sequence, the duration of each stage and whether you will write code.

Deliverable: A written reply from your recruiter confirming the format.

Day 2 — Work C++

• Spend the session on C++, which Gstek candidates report being tested on.
• Write one worked example in C++ and time yourself on it.

Deliverable: One timed worked example in C++.

Day 3 — Work RF Data Acquisition

• Spend the session on RF Data Acquisition, which Gstek candidates report being tested on.
• Write one worked example in RF Data Acquisition and time yourself on it.

Deliverable: One timed worked example in RF Data Acquisition.

Day 4 — Work C

• Spend the session on C, which Gstek candidates report being tested on.
• Write one worked example in C and time yourself on it.

Deliverable: One timed worked example in C.

Day 5 — Answer out loud: Technical and Domain Proficiency

• Answer aloud, timed: How have you utilized C, C++, or Java to manage instrumentation control in previous projects?
• Answer aloud, timed: Can you explain your experience with Digital Signal Processing (DSP) and how it integrates into automated data acquisition?

Deliverable: Spoken answers to 2 reported Technical and Domain Proficiency question(s), under time.

Day 6 — Rehearse your own examples

• Prepare three examples from your own work where you made the decision, each with the outcome you can quantify.

Deliverable: Three examples written out, each with a number attached.

Day 7 — Dry run for Gstek

• Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Can you explain your experience with Digital Signal Processing (DSP) and how it integrates into automated data

Medium · Technical and Domain Proficiency

Can you explain your experience with Digital Signal Processing (DSP) and how it integrates into automated data acquisition?

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

What is your experience with software development tools like MATLAB, LabWindows/CVI, or IntelliJ?

Medium · Technical and Domain Proficiency

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Estimate work you have never done and defend the range

Hard · estimation · backfills · expand-contract

You are asked to estimate a change you have never attempted: add a column to a 100-million-row table, populate it, move reads across, and drop the old shape. Give a range with the assumptions that generate it, including batch size, the signal your backfill throttles on, and wall-clock hours, and name the three unknowns that would move the number most. Then describe a real estimate you gave under comparable ignorance: how you expressed its uncertainty, what you committed to, and how wrong you turned out to be.

Approach

1. Decompose into independently deployable steps before estimating anything: add the column nullable, write both shapes, backfill in batches, verify, move reads, stop writing the old shape, drop it. That is four deploys spread over days, and the calendar estimate is dominated by them rather than by the loop's runtime.
2. Do the arithmetic aloud for the part that has arithmetic in it: batch size times number of batches times per-batch duration, at a write rate the primary can absorb alongside roughly 1.2k writes per second of production traffic. The loop is throttled by replication lag and lock waits, not by how fast it can issue statements.
3. Price the schema step by its lock rather than its statement duration. In PostgreSQL an ALTER TABLE taking ACCESS EXCLUSIVE waits for every open transaction on that table while later queries queue behind it, so a millisecond change issued during a thirty-second analytics query stalls that table for thirty seconds. Adding a nullable column with a non-volatile default avoids a rewrite from version 11; a new index wants CREATE INDEX CONCURRENTLY, which cannot run inside a transaction block and leaves an invalid index behind if it fails.
4. Express the answer as a range whose endpoints each trace to a stated assumption, then name the cheapest experiment that collapses it, which is almost always running one real batch against the real table and multiplying.

Follow-up

• How do you verify the backfill genuinely finished, given rows written by production traffic while it ran?
• Where does the backfill resume from after a worker is killed mid-batch, and what makes that resume point trustworthy?