Interview guides · Gilmour Space Technologies

Gilmour Space Technologies Software Engineer Interview Questions & Guide 2026

A prep plan for Gilmour Space Technologies software engineer candidates: answer first, read the solution second, repeat the misses later.

The 60-second brief

As a Software Engineer at Gilmour Space Technologies, you are at the heart of Australia’s most ambitious private space enterprise. You are not just writing code; you are building the intelligence that guides launch vehicles into orbit. Whether you are working on Avionics, Flight Software, or Electrical Systems, your contributions directly impact the safety, reliability, and mission success of cutting-edge aerospace hardware.

Browser-facing seats are not covered by algorithm practice. Scope in state ownership, what the page does on a slow or failed request, and how you would diagnose something that renders correctly but feels slow.

Focus areas

Make every write idempotent under client retries
Bound blast radius with per-tenant concurrency limits
Keep money in integer minor units

Overview

This role requires a blend of high-level systems thinking and low-level precision. You will operate in a fast-paced, mission-critical environment where software must interface seamlessly with complex mechanical and electrical components. The work is challenging and requires a deep commitment to excellence, as every line of code is tested against the unforgiving constraints of space flight.

The Gilmour Space Technologies interview process

Gilmour Space Technologies candidates report 2 rounds · ≈ 2-4 weeks. The stages below are what candidates describe, not a published process.

Initial Technical Screening

Input bounds are the part of the prompt most often skimmed, and they usually contain the answer. They tell you which complexity class is admissible, which narrows the search before you have thought about the problem itself. As a rough planning figure, a compiled language does on the order of 10^8 simple operations per second and an interpreted one roughly an order of magnitude less. So n up to about twenty admits enumerating subsets, a few thousand admits a quadratic pass, and a million admits neither: you need near-linear, or linear with a log factor. If the bounds are missing, ask for them.

What to demonstrate

Whether the approach is justified by the stated input size rather than by whichever pattern you recognised first
Whether you ask about the properties that change the algorithm: whether the input arrives sorted, whether duplicates occur, whether values are bounded integers, whether it all fits in memory
Whether you can name the bottleneck in your own solution and what would remove it, even when you deliberately leave it in place
Whether a claimed speedup is real, since memoising a recursion only helps when subproblems genuinely overlap and the state can be keyed cheaply

How to prepare

For each algorithm you rely on, write down the largest n it handles in roughly a second, then check two of those figures by timing them in the language you will actually type in
For two weeks, write one line naming your target complexity and the bound that justifies it before you write any code, then compare that line with what you ended up submitting
Practise the conversion backwards: given a required O(n log n), list the mechanisms that get you there (sorting, a heap, an ordered map, divide and conquer) and choose by what the problem needs to query, not by what you used last

Deep-Dive Sessions

Because the format is not fixed, the first job in the room is classification. Listen to the opening question and decide what it is: a probe into work you have already described, a fresh problem to solve now, or a conversation about how you operate. Each wants a different register, and the common failure is forcing a rehearsed structure onto a question that did not ask for it. Running a full design ritual on a ten-minute debugging question reads as not listening. When you cannot tell which it is, ask how long they want to spend and answer at that depth.

What to demonstrate

Whether the shape of your answer matches the question, so a yes-or-no gets answered before it is justified and an open prompt gets a direction before a detour
Whether you check how much depth is wanted instead of deciding for them, and whether you stop when the answer is complete rather than continuing until someone interrupts
Whether you can be redirected in the middle of an answer without restarting it from the beginning
Whether a question outside your experience gets an honest boundary followed by reasoning from what you do know, instead of a confident answer with nothing behind it

How to prepare

Rehearse one project at three lengths, roughly thirty seconds, three minutes, and a full walkthrough at the depth of a design review, and practise switching between them when someone interrupts mid-telling
Have someone ask you five questions of deliberately mixed type in one sitting without telling you the types, and score only whether you identified each one correctly before you started answering
Draft the sentence you will use to check depth, along the lines of asking whether the short version is useful here or they want the detail, and use it in a real conversation this week so the day of the round is not its first outing

Where candidates lose points

One shared connection pool for every tenant and every query class

A single tenant with a large table and a missing index can occupy every connection with slow queries, and every other tenant then waits in connection acquisition -- a queue invisible in database metrics, because the database itself looks healthy while the application starves. Containment is bulkheads: separate pools or per-tenant concurrency caps for interactive requests, background jobs and exports, a statement timeout low enough that a pathological query dies before it accumulates, and an idle-in-transaction timeout so a stuck client cannot pin a connection and its locks indefinitely. One caveat worth knowing in advance: if a transaction-pooling proxy sits in front of the database, session-scoped behaviour changes, so session-level advisory locks and settings applied outside a transaction do not survive the way they do on a direct connection.

Checking a quota with a select and then writing

Under read-committed isolation, two concurrent transactions both observe a count below the limit and both insert, so the limit is exceeded by exactly the concurrency. Repeatable read does not rescue it either: it provides a stable snapshot, and this is write skew, which snapshot isolation permits by design. The options are serialisable isolation, which detects the conflict and aborts one transaction with a serialisation failure and therefore obliges the caller to retry; a single statement with the predicate inside the write; or a constraint that makes the surplus insert fail outright. The reason this pattern survives review is that it is correct in every test that runs one request at a time.

Sorting when the problem never required a total order

Match the algorithm to the guarantee actually needed: the top k comes from a size-k heap in O(n log k) time and O(k) space, distinctness needs a set rather than an ordering, and a small bounded integer key range admits a linear counting pass. A full O(n log n) sort is the right default only when you genuinely need everything in order.

Abandoning working code to chase the optimal solution

Get the straightforward version correct, state its complexity, and only then optimise, keeping the working version until the faster one passes the same cases. A correct quadratic solution with a stated path to linear beats a half-written optimal one that never ran.

Questions & practice

Schedule ordered webhook retries with a heap of subscription queues

Medium · heap · scheduling · backoff · head-of-line-blocking

Design the in-memory scheduler for webhook delivery. Up to 20 million rows sit in status pending or failed_retryable across 200,000 subscriptions, each row carrying next_attempt_at and attempt_count, and each endpoint having a circuit breaker. Deliveries for one subscription must be attempted in order, so at most one attempt per subscription may be in flight. Support due(now), complete(delivery, outcome) and insert(delivery) in O(log S), where S is the subscription count rather than the delivery count. Give the backoff formula you schedule retries with.

Approach

Key the global heap by subscription, not by delivery. Each subscription owns a FIFO of its due deliveries in event order; the heap holds one entry per eligible subscription, keyed by its head's next_attempt_at. That is 200,000 heap entries instead of 20 million, and it makes the one-in-flight rule structural rather than a check somebody can forget.
due(now): peek the minimum. If its key is in the future, sleep until then instead of spinning. Otherwise pop it, move the subscription into an in-flight set, and do not re-push it. A subscription absent from the heap cannot be dispatched twice, which is precisely how ordering is preserved.
complete: on success, drop the head and re-push the subscription keyed by its new head, or leave it out when the queue empties. On a retryable failure, increment attempt_count and set next_attempt_at = now + uniform(0, min(cap, base * 2^attempt)), sampled uniformly across the whole interval. That is full jitter; deterministic backoff re-synchronises the herd you just created.
Circuit breaker: park the subscription in a second heap keyed by its half-open time, so an endpoint dead for six hours costs one heap entry and zero attempts rather than consuming worker slots. Admit exactly one probe at half-open and close the breaker only on its success.
Say the price of the ordering guarantee out loud. One in-flight attempt per subscription means an endpoint answering in 10 seconds drains at 0.1 deliveries/second however many workers you run, and its backlog grows until it recovers. If the customer does not need order, allow k in flight and document delivery as unordered; that is the trade, and it is a product decision.
All three operations are O(log S) with O(S) resident heap memory and the queues themselves backed by the store. The database-backed equivalent is a partial index on (subscription_id, next_attempt_at) where status in ('pending','failed_retryable') claimed with FOR UPDATE SKIP LOCKED, and the write-back must be fenced on lease_token so a worker that stalled and resumed cannot overwrite a newer attempt.

Worked solution (30 min)

Define the four structures explicitly: queues: subscription_id -> deque[delivery], ready: min-heap of (next_attempt_at, subscription_id), inflight: set[subscription_id], breaker: min-heap of (half_open_at, subscription_id).
Write down the invariant you will assert after every operation: a subscription appears in at most one of ready, inflight and breaker, never in two.
Implement due, complete and insert, then simulate 200,000 subscriptions with Zipf-distributed queue depths totalling 20 million deliveries.
Add one endpoint that always times out after 10 seconds and one that always answers in 20 ms, then measure the fast endpoint's throughput with and without the per-endpoint breaker.
Instrument heap size across the run.

Expected result: Heap size stays at or below 200,000 regardless of the 20 million deliveries. The fast endpoint's throughput is unaffected by the dead one once the breaker trips. The dead endpoint's deliveries accumulate in their own deque and cost exactly one heap entry.

Verify it yourself

The asserted invariant never fires under concurrent workers.
Replaying the same delivery set twice produces identical per-subscription ordering, even though the interleaving across subscriptions differs.
Replacing full jitter with fixed backoff makes retry attempts cluster visibly in a histogram of attempt timestamps.

Follow-up

One subscription has 4 million queued deliveries. What stops it from starving the other 199,999, and what does your heap look like under that load?
A customer requests redelivery of last Tuesday's events. Where do those rows enter your structure, and what keeps them from reordering live traffic?
The process restarts. How much state do you rebuild, and what stops every subscription from being attempted in the same second?

Hold a tenant to a trailing sixty-second request limit

Medium · sliding-window · two-pointer · rate-limiting · tenant-skew

The gateway must hold each tenant to R requests in any trailing 60 seconds, in aggregate across three regions and every pod, within a budget of under 10 ms added p99. Peak is 30,000 requests/second across 200,000 active tenants, and traffic is heavily skewed toward a handful of them. Give an exact single-process algorithm with its amortised per-request cost and its memory per tenant, then a bounded-memory approximation and the worst-case overshoot it actually admits. Say what the distributed version does when the counter store is unreachable.

Approach

Exact, single process: a per-tenant deque of request timestamps. On arrival, pop from the front while front <= now - 60s, then admit if the remaining length is below R and push. Each timestamp is pushed once and popped once, so the cost is O(1) amortised. The O(R) version is the one that re-filters the whole deque on every request.
Quote the memory. R = 1,000 across 200,000 active tenants is up to 2 x 10^8 timestamps at 8 bytes, about 1.6 GB, and that is the worst case rather than the mean, because the long tail of small tenants holds almost nothing. Skew helps you here and hurts you in the sharding decision.
Bounded alternative, with its real bound stated: a fixed 60-second counter is O(1) memory but admits close to 2R across a 60-second span straddling a boundary. The weighted two-bucket estimate, prev * (60 - elapsed)/60 + cur, is better on smooth traffic but assumes the previous window's arrivals were uniform; an adversary packing them at the end of that window is undercounted and can still approach 2R. Say that rather than calling it exact.
Token bucket is the usual gateway answer and a different contract: O(1) state per tenant (tokens, last_refill), a sustained rate, and a deliberate burst allowance equal to the bucket size. Choose it when a burst is acceptable and the log when the limit is contractual.
Distributed: the limit is per tenant in aggregate, so a local bucket of R/N per pod is wrong in both directions under skew. A tenant landing on one pod is throttled at R/N, and a tenant spread evenly across pods exceeds R. The shared check must be a single atomic round trip, one script or one increment-and-compare, never read-then-write, and it must fit inside the 10 ms p99 budget.
Decide the unavailable case in advance and write it down. Failing open keeps the product up and lets a tenant exceed its limit for the duration; failing closed converts a counter-store outage into a full outage. Most gateways fail open on rate limits and closed on authorisation, and those are two separate decisions made separately.

Follow-up

One tenant sends 40% of all traffic. What does that do to a single counter key, and what do you shard on instead?
Quotas rather than rate limits: the check is select used; if used < limit then insert. Name the isolation level that still permits the overshoot, and the two fixes.
How do you return an accurate Retry-After from the exact algorithm without a second scan?

Locate a billing reconciliation gap without rescanning ninety million events

Hard · reconciliation · dimensional-bisection · watermarks · hypothesis-testing

A tenant's sealed invoice total is 0.4% below the sum of its raw usage_event rows for the period. That tenant has 90 million events over 30 days in a table partitioned daily on ingested_at, and its rollups carry source_max_ingested_at, revision and sealed_at. Recomputing all 30 days from raw is correct, and you are not going to do it. Give the procedure that locates the divergent (workspace, sku, hour) cell, the cost of each probe, and the one query you run before any of it.

Approach

Run the free query first. Sum raw quantity for the period restricted to ingested_at <= source_max_ingested_at of the sealed rollups, and compare that against the unrestricted sum. The rollup stores the watermark precisely so this can be answered without a scan. If the whole 0.4% sits above the watermark, nothing is broken: it is late data, it becomes an adjustment line, and the investigation ends in one query.
Only if the gap survives that test do you bisect, and you bisect by dimension rather than by rows. Compare 30 per-day totals, then inside the offending day compare the 6 SKUs, then the workspaces, then the 24 hours. That is roughly 30 + 6 + W + 24 grouped probes, each an indexed range scan over one daily partition for one tenant, against O(N) per attempt for the naive re-fold.
Quantify why naive is not merely slow but unusable mid-incident: at a generous 200,000 rows/second sequential, 90 million rows is about 7.5 minutes per attempt, you will want ten attempts, and every one competes for I/O on the same partitions live ingest is writing. The diagnostic worsens the backlog it is diagnosing.
Before fetching each comparison, state what it would look like under each hypothesis. Two adjacent hours off by equal and opposite amounts is occurred_at versus ingested_at bucketing. A whole day offset by exactly N hours is a timezone applied at the wrong layer. A gap confined to one SKU in one workspace is an environment filter. The same (tenant_id, idempotency_key) present in two ingested_day partitions is the dedup horizon losing a retry that crossed midnight.
Make the next bisection cheap by storing the aggregate you keep recomputing. A per-(tenant_id, ingested_day) count and quantity checksum turns step two from thirty probes into one read, and it is the same number the reconciliation job already produces.
Whatever you find, the sealed period does not change value. The correction is an adjustment line pointing at the line it reverses, carrying its own source_rollup_watermark, because the original invoice is the evidence of what the customer was charged.

Follow-up

The gap is 0.4% in one direction on one day and 0.4% the other way the next day. What does that shape rule in, and what does it rule out?
How do you distinguish a duplicate from a restatement, given revision and recomputed_at on the rollup?
Ingest is still running while you investigate. What makes your two numbers comparable at all?

Decide which facts an invoice line copies instead of joining

Medium · denormalisation · immutable records · foreign keys · rounding

invoice_line_item already denormalises tenant_id, which is reachable through invoice_id, and stores amount_minor even though quantity times unit_price_micros would recompute it. A reviewer asks you to normalise both away, and separately asks whether the tenant's legal name and billing address should be copied onto the invoice header. Decide each case. For every field you keep denormalised, name the read pattern or the invariant that justifies it, the anomaly the copy can develop, and the mechanism that prevents that anomaly here.

Approach

Split the question into two kinds of copy, because they fail differently. A copy of a currently mutable fact is a cache: it drifts and needs invalidation. A copy of a fact frozen at write time is not a cache at all, it is the record of what happened, and normalising it away destroys information the source no longer holds.
Keep tenant_id on the line. It costs 8 bytes, it leads every index on the table so no read is ever accidentally cross-tenant, and it turns a wrong join into an empty result rather than another tenant's money. Prevent the drift structurally: a unique constraint on invoice (invoice_id, tenant_id) plus a composite foreign key from the line on (invoice_id, tenant_id) makes a mismatched pair impossible, so the database enforces agreement instead of a code review.
Keep amount_minor. Rounding must happen exactly once, at a named site, with a stated mode (half-even here). If readers recompute from quantity and unit_price_micros, every reader owns a rounding decision, and half-up and half-even diverge systematically across thousands of lines rather than cancelling out. A check constraint can bound the stored value but deliberately cannot re-derive it.
Copy the legal name and billing address onto the invoice header, written once and never updated. The statement must show what was true when it was sealed, and the tenant record will change afterwards. This is a snapshot for the same reason source_rollup_watermark is stored per line: without it, nobody can reconstruct what the customer was told.
Name the read pattern that pays for all of it. Rendering, dispute response and export are per-tenant, per-period reads over thousands of lines that would otherwise join back to slowly changing dimensions that no longer hold the historical value. The write side is a once-per-period batch, so the extra columns cost nothing that matters.
Concede the case where the reviewer is right: a mutable operational attribute such as the tenant's current plan name has no business on a line. If a report wants it, join. If a statement needs the plan as of the period, that is another snapshot and it belongs on the header with the rest.

Follow-up

Write the composite foreign key and the unique constraint it requires on the parent. What does it cost on every line insert, and what does it do to a bulk load?
A tenant is renamed after being invoiced. Which rows change, and what does the customer see on last quarter's PDF?
Where does currency live, and what breaks if a tenant's billing currency changes between two periods?

Enforce a concurrent-run quota that survives simultaneous requests

Medium · isolation levels · write skew · quotas · lock contention

A plan allows at most 20 concurrently running rows in job_run per tenant. The table holds run_id, tenant_id, workspace_id, status (queued, leased, running, succeeded, failed, timed_out, cancelled, lost), lease_token, leased_until, started_at and finished_at. Today the service runs select count(*) from job_run where tenant_id = $1 and status = 'running', compares the result to 20, then inserts. Under load a tenant exceeds the cap by exactly the number of concurrent requests. Name the anomaly, say which isolation levels do and do not prevent it, and give a version that holds, as SQL.

Approach

Name it: write skew. Each transaction reads a predicate (the count of running rows), neither modifies what the other read, and both then insert rows that jointly violate an invariant no single row expresses. Read committed permits it. So does repeatable read, because snapshot isolation's first-updater-wins check fires only on conflicting row updates, and these are inserts touching disjoint rows.
Enumerate the fixes with their real costs. SERIALIZABLE works: PostgreSQL's SSI tracks the predicate read and aborts one transaction with SQLSTATE 40001, which obliges the caller to retry and makes the abort rate rise with contention on a hot tenant. Folding the predicate into the write as insert ... select ... where (select count(*) ...) < 20 narrows the race to the statement's snapshot but does not close it under read committed.
Give the version that holds at read committed: serialise on a row both transactions must touch. update tenant_concurrency set running = running + 1 where tenant_id = $1 and running < 20 returning running updates zero rows when the cap is reached, and zero rows is the rejection. This works because at read committed a blocked UPDATE re-evaluates its WHERE clause against the newly committed row; at repeatable read the same statement raises a serialisation error instead, so the isolation level changes the calling contract.
State the cost you just bought. That row is now a per-tenant serialisation point, so admission throughput for the tenant is bounded by one divided by the lock hold time; at a 2 ms hold that is roughly 500 admissions/second. Keep the critical section to the single UPDATE, with no network call or scheduling decision inside the transaction, and decrement in the same transaction that writes the terminal status.
Close the leak the status enum implies: a run can end as lost, so a crashed worker otherwise consumes a slot forever. Reconcile on a schedule against status = 'running' and leased_until < now(), and treat the counter as a fast path over job_run, which stays the system of record.

Worked solution (25 min)

Seed a tenant with 19 running rows, then fire 8 concurrent sessions each running the select-then-insert, and count the resulting running rows.
Repeat at REPEATABLE READ and confirm the count still exceeds 20.
Repeat at SERIALIZABLE, count the 40001 aborts, and note that without a retry loop those requests fail rather than queue.
Implement the atomic counter UPDATE, re-run the 8-way test, and confirm exactly 20 running rows with zero over-admissions.
Kill a worker mid-run, let the lease expire, and check whether the slot comes back without intervention.

Expected result: Write skew identified; read committed and repeatable read both permit it; serialisable prevents it at the price of 40001 retries; the working read-committed version is update tenant_concurrency set running = running + 1 where tenant_id = $1 and running < 20 returning running, whose zero-row result is the rejection, plus a reconciliation path for runs that terminate as 'lost'.

Verify it yourself

At 8x concurrency against a cap of 20, running rows never exceed 20.
The rejection returns zero rows rather than raising, so it is distinguishable from an error in the caller.
Killing a worker does not permanently consume a slot.
The counter and select count(*) from job_run where status = 'running' agree after reconciliation.

Follow-up

Write the retry loop for the SERIALIZABLE version. What does the caller see when it keeps aborting, and what bounds the retries?
Two regions each keep a counter. What is the effective cap, and what does admission do when the counter store is unreachable?
The cap changes mid-flight on a plan upgrade. Do running jobs get killed, and what does the counter row look like during the change?

How do you balance modularity with the need for low-latency execution in avionics?

Medium · system design and architecture

Approach

Fix the scope first: who calls this, how often, and what they do when it fails.
Name the failure you are designing for, then the recovery path.
Name the read and write paths separately; they rarely have the same bottleneck.

Follow-up

How does this behave when that dependency is down for an hour?
What would you drop to keep the system up under load?

Describe your process for architecting a software stack that interacts with high-speed electrical hardware.

Medium · system design and architecture

Approach

Name the failure you are designing for, then the recovery path.
Choose a partition key and say what query it makes expensive.
Fix the scope first: who calls this, how often, and what they do when it fails.

Follow-up

How does this behave when that dependency is down for an hour?
What breaks first when traffic grows ten times?

How would you design a fault-tolerant system to handle sensor failure during flight?

Medium · system design and architecture

Approach

Name the read and write paths separately; they rarely have the same bottleneck.
Fix the scope first: who calls this, how often, and what they do when it fails.
Choose a partition key and say what query it makes expensive.

Follow-up

What would you drop to keep the system up under load?
How does this behave when that dependency is down for an hour?

How do you ensure real-time performance in flight-critical software?

Medium

Approach

State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Clarify what is being asked and what a complete answer contains.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

How do you approach unit testing for hardware-in-the-loop (HIL) simulations?

Medium

Approach

Clarify what is being asked and what a complete answer contains.
Work from the requirement backwards to the design.
Say what you would check first and why it is the highest-information step.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Metering ingest that survives a six-hour producer replay

Hard · idempotency · dedup horizon · partitioning · watermarks

metering-ingest consumes usage events at-least-once - 250M/day, 10-40k/second at peak - and folds them into usage_rollup_hourly keyed (tenant_id, workspace_id, sku, hour_start). usage_event is partitioned daily on ingested_at with unique (ingested_day, tenant_id, idempotency_key). A producer outage ends in a six-hour replay that re-sends events already ingested, some of whose originals crossed midnight. Design the consumer: partitioning, where the acknowledgement sits relative to the commit, the deduplication horizon and its storage cost, and how the rollup watermark advances. Nothing may be double-counted and nothing may be silently dropped.

Approach

Choose the acknowledgement position deliberately and name what each choice costs. Acknowledging after the fold commits makes the consumer at-least-once: a crash between the two replays the batch and produces duplicates, which are ordinary and absorbable. Acknowledging first makes it at-most-once: a crash between the two drops revenue with no error raised anywhere and no way to detect it later. Take at-least-once and design everything downstream to absorb duplicates.
Put the dedup and the fold in one transaction so there is no window between them. Insert the batch into usage_event with ON CONFLICT DO NOTHING, take the rows actually inserted, and fold only those into usage_rollup_hourly with an upsert on (tenant_id, workspace_id, sku, hour_start) bucketed by occurred_at, not ingested_at. A batch of about 2,000 rows is one round trip and one index probe per event.
Attack the partition-key flaw head on: the unique index includes ingested_day because a unique index on a partitioned table must contain the partition key, so the same (tenant_id, idempotency_key) re-sent after midnight is a different index entry and passes. Deduplicate instead against a store keyed (tenant_id, idempotency_key) with no date component, whose horizon exceeds the producer's maximum retry window plus the longest replay you intend to support. At 14 days that is 250M x 14 = 3.5 billion keys, which is a dedicated key-value store, not a larger index on the same table. The alternative - partitioning usage_event on (tenant_id, occurred_day) so the natural key is stable - fixes dedup but loses pruning on ingest time and makes retention by dropping partitions awkward.
Partition the consumer by hash of tenant_id so one tenant's replay stalls only its own partitions, and give replay traffic a separate lower-priority lane so live ingest keeps its latency. The cost is explicit: that tenant's watermark lags while the replay drains, and everything gated on the watermark waits for it.
Define the watermark as a property of committed work, not of wall-clock time: per partition it is the largest occurred_at such that every event with a smaller occurred_at has committed, and the sealing decision uses the minimum across partitions. Record source_max_ingested_at on every rollup row so any number can prove what it did and did not include, and keep restatement legal only while status = 'open' - after sealed_at the value is frozen and a late event becomes an invoice adjustment instead.

Worked solution (40 min)

Write the consumer loop in pseudocode with the acknowledgement after the commit, then annotate each line with what is lost or duplicated if the process dies exactly there.
Size the dedup store: events/day x horizon_days keys, bytes per key including the tenant prefix, and the resulting memory or disk. Compare that cost against simply extending retention on the partitioned table and say why the latter does not fix the problem.
Take one event ingested at 23:59:58 and replayed at 00:00:04 and work out its fate under (a) the partitioned unique index alone and (b) the separate dedup store.
Write the per-partition watermark formula, then what the seal uses, then what a single stalled partition does to sealing.

Expected result: An at-least-once consumer acknowledging after the commit; deduplication on (tenant_id, idempotency_key) in a store whose horizon of at least 14 days exceeds max retry window plus supported replay length, sized at roughly 3.5 billion keys; tenant-hashed partitions with replay on a separate lane; a per-partition watermark with sealing gated on the minimum across partitions; source_max_ingested_at written on every rollup row.

Verify it yourself

The midnight-crossing retry must be rejected by whatever you chose. If the table's unique index is your only dedup, it is accepted and the invoice is wrong by exactly that event.
You should be able to name a distinct failure for acknowledge-before-commit and for acknowledge-after-commit. If both sound the same, the position was not actually chosen.
quantity_sum for any (tenant, workspace, sku, hour) must be reproducible by re-aggregating usage_event filtered to ingested_at <= source_max_ingested_at. If it is not reproducible, the rollup is an opinion rather than a projection.

Follow-up

The dedup store is lost entirely. What can you still guarantee, and how do you rebuild it from what remains?
A replay delivers events for an hour that is already sealed. Trace exactly what happens to them, row by row.
One partition is stuck on a poison message, so the minimum-across-partitions watermark never advances and no tenant can be sealed. What is your escape hatch and what does it cost in correctness?

One tenant's counter writes stall the whole connection pool

Medium · lock contention · connection pool · multi-tenancy

A change that made a per-tenant usage counter correct now produces site-wide latency whenever one large tenant writes: unrelated endpoints time out waiting for a connection while database CPU stays low and no statement is slow. The change wraps the counter update in a transaction that takes SELECT ... FOR UPDATE on one row, calls an external pricing service, then updates and commits. Give an ordered checklist, the arithmetic that bounds that tenant's write rate, and three repairs with the cost each one accepts.

Approach

Separate waiting from working. Low database CPU alongside high application latency points at a queue, so instrument connection-acquisition wait separately from query execution time; that queue forms in the application and is invisible in database metrics, which is why the database looks healthy throughout.
Confirm the lock rather than assuming it: sample waiting sessions and group by wait event, relation and tuple. Contention concentrated on one tuple belonging to one tenant is the signature; a deadlock would instead show the database aborting transactions after its detection timeout, which is not happening here.
Do the arithmetic out loud. Throughput on a serialised row is one divided by the lock hold time, and the hold spans the external call, so a 20 ms pricing call caps that tenant near 50 writes per second no matter how many pods run. Every waiter also holds a pooled connection while it queues, so the shared pool drains and unrelated tenants fail at acquisition.
Repair one: shrink the critical section to a single statement with the price resolved before the transaction opens. Cost is a stale price for the duration of one request and a second round trip; benefit is a hold time measured in the database's own execution time.
Repairs two and three change where the contention lives rather than how long it is held. Sharding the counter into per-(tenant, bucket) rows and summing on read multiplies write throughput by the shard count, at the cost of an aggregate on every read and a shard count you must size against the largest tenant rather than the median. Accumulating in memory and flushing periodically removes the per-write round trip entirely, paid for with a bounded loss window on crash, which is acceptable for a rate limiter and not for a billing counter.
Contain independently of which repair wins: a separate pool or per-tenant concurrency cap for this write class, a statement timeout low enough that a pathological query dies before it accumulates waiters, and an idle-in-transaction timeout so a stuck client cannot pin a connection and its locks.

Follow-up

What would a genuine deadlock look like here, which two code paths would produce one, and how does the database's response differ from what you observed?
If a transaction-pooling proxy sits in front of the database, which of your three repairs changes behaviour, and what stops working that would have worked on a direct connection?
The counter also enforces a quota. Why is SELECT the count and then INSERT still wrong after you have fixed the contention?

Suggested practice checklist

For someone fluent in a dynamic language who has shipped real work but has never had to say what the runtime is doing underneath. The week is built on measuring and deliberately breaking things, because the questions that expose this background are the ones where the interviewer asks why a second time.

Day 1 — Measure before reasoning

Take a slow piece of your own code, write down in advance where you believe the time goes, then profile it and record how wrong the guess was. The cost is usually an allocation you did not notice or an accidental quadratic membership test.
Replace one list membership test inside a loop with a set and measure at a thousand, ten thousand and a hundred thousand elements, confirming the shape of the curve rather than only that it got faster.
Write down the three quantities you can now measure instead of assert: wall time, peak memory, and call count for the function you suspected.

Deliverable: A before-and-after profile of real code plus a written note on the size of the gap between the guess and the measurement.

Day 2 — References, copies, and the bugs they produce

Write the function with a mutable default argument, call it three times, and explain the accumulating result: the default is evaluated once when the function is defined, so every call shares one object.
Build a nested structure, take a shallow copy, mutate an inner element, and show that both views changed, because a shallow copy duplicates the container and not the elements. Then fix it with a deep copy and state the cost you just accepted.
Write two functions, one mutating its argument in place and one rebinding the local name, and predict the caller's view of each before running it. That single distinction produces most of the bugs that pass their tests.

Deliverable: Three small programs whose output you predicted correctly before running, each with a one-line statement of the rule underneath.

Day 3 — Types, once, in a language that checks them

Port one module you have already written, roughly a hundred lines, into a statically typed language, and record every place the compiler demanded an answer your original had left implicit: a value that can be absent, a numeric width, a case never handled.
Write the same signature in both languages and state what the static one guarantees before the program runs and what it does not, since it will not save you from a wrong algorithm or an index out of range.
Write the difference between an interface satisfied by declaration and one satisfied structurally, with one case each where the other approach would miss the mistake.

Deliverable: One module in two languages plus a list of the questions the type checker forced you to answer.

Day 4 — Concurrency, starting with what actually runs at the same time

Run the same CPU-bound function across four threads and four processes and measure both. Under the default CPython build the threaded version will not speed up, because only one thread executes bytecode at a time; the process version will. Check which build you are on first, since free-threaded builds remove that lock and change the result.
Then run a blocking I/O workload across four threads and measure it speeding up, because the interpreter releases that lock around blocking calls, which is why treating threads as useless is wrong as a general claim.
Build the lost update: two threads each incrementing a shared counter a hundred thousand times, and show a final value below the expected sum, because an increment is a load, an add and a store and the thread can be suspended between them. Fix it with a lock and then measure what the lock costs.

Deliverable: Three measurements, threads against processes on CPU work, threads on I/O work, and a demonstrated lost update, each with the mechanism written underneath.

Day 5 — Debugging as a procedure rather than an instinct

Work one real failure as a bisection: find a revision or an input size where it is good and one where it is bad, halve repeatedly, and state the two assumptions bisection needs, that the property changes exactly once across the range and that the test is reliable.
Minimise one failing input to the smallest version that still fails, and record how many rounds it took.
Keep a hypothesis log for one bug in three columns, what I believe, what would disprove it, what I observed, and stop yourself the first time you are about to change two things at once.

Deliverable: One bug worked to root cause with a written hypothesis log and a minimised reproducing input.

Day 6 — Tests that catch the bug you are about to write

Implement an LRU cache with a capacity bound, then write the three test cases that would catch an off-by-one in eviction: insert exactly capacity items and assert nothing was evicted, insert one more and assert the least recently used key is the one gone, and read an old key just before that insert so the eviction victim changes.
Add a property test comparing your implementation against a deliberately slow reference, an ordered list scanned linearly, over a few thousand random operation sequences, because a slow reference finds the cases you would not have thought to write.
Write one numeric test that fails under exact equality and passes with a tolerance, and state why the tolerance has to be relative rather than absolute once the magnitudes grow.

Deliverable: An LRU implementation with three boundary tests, one property test against a slow reference, and one tolerance-based numeric test.

Day 7 — Debug something broken, out loud

Have someone plant three defects in a two-hundred-line program, an off-by-one, a shared mutable state bug, and a wrong error-handling path, then find them while narrating, under a fixed rule: state the hypothesis before touching anything.
Time each one and record which tool found it, reading, a printed value, a debugger, or a test, because the question asked in interviews is how you would find it rather than what it was.
Write the sentence you will use when you do not yet know the cause, one that names the next measurement instead of offering a guess.

Deliverable: A recorded debugging session with time-to-find per defect and the method that found each.

The failure that was yours

Keep one story where the bad call was yours rather than a dependency's or a manager's. Name the check that would have caught it, whether you added that check afterwards, and whether it has fired since. Answers that route blame outward end the conversation early; answers that end in a guardrail someone still relies on tend to open it up.

How do you approach collaboration with mechanical and electrical engineers when software is the bottleneck?

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Pick a story where you made the decision, not one where you watched it.
Name the disagreement and how you resolved it with evidence.

Follow-up

How did you know your change caused the improvement?
What did you decide not to do, and why?

Describe a time you had to troubleshoot a complex issue under a tight deadline.

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Name the disagreement and how you resolved it with evidence.
Give the blast radius: what could have broken, and what you measured.

Follow-up

What did you decide not to do, and why?
What would you do differently if you ran that again?

How do you handle communication protocols between microcontrollers and sensors?

Medium · behavioural and engineering judgement

Approach

Pick a story where you made the decision, not one where you watched it.
Name the disagreement and how you resolved it with evidence.
Close with what you would do differently, concretely.

Follow-up

How did you know your change caused the improvement?
What did you decide not to do, and why?