cswork / libraryOpen practice workspace

Interview guides · Geekplus Australia Pty

Geekplus Australia Pty Software Engineer Interview Guide

Geekplus Australia Pty Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

As a Software Engineer at Geekplus Australia Pty, you are at the intersection of cutting-edge robotics and large-scale warehouse automation. This role is critical to the company’s mission of revolutionizing logistics, as you are responsible for bridging the gap between complex software logic and physical hardware performance. You will be working on systems that power autonomous mobile robots (AMRs), ensuring that deployment, control, and integration occur seamlessly for our global clients. Your work directly impacts the efficiency and reliability of smart warehouses. Whether you are troubleshooting deployment bottlenecks, optimizing control algorithms, or integrating new hardware modules, your technical contributions ensure our systems operate at peak performance.

This guide is scoped to a Software Engineer candidate at Geekplus Australia Pty.

Focus areas

  • Deployment Engineering
  • Hardware Integration
  • Software Engineering (General)

The Geekplus Australia Pty interview process

Geekplus Australia Pty candidates report 4 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

The process begins with an initial screening to assess basic qualifications and fit.

What to demonstrate

  • The process begins with an initial screening to assess basic qualifications and fit
  • Depth in Deployment Engineering

How to prepare

  • Be able to walk your CV end to end in two minutes, and say why this company specifically.
  • Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Dives

Candidates will engage in deeper technical discussions, focusing on practical applications.

What to demonstrate

  • Candidates will engage in deeper technical discussions
  • Focusing on practical applications

How to prepare

  • Answer aloud and timed: What experience do you have with ROS (Robot Operating System) or similar middleware architectures?
  • Answer aloud and timed: How do you optimize software performance for resource-constrained embedded systems?

Team Discussions

Potential involvement of current engineering and deployment team members in discussions.

What to demonstrate

  • Potential involvement of current engineering and deployment team members in discussions
  • Depth in Deployment Engineering

How to prepare

  • Answer aloud and timed: Describe a time you had to troubleshoot an integration issue between new hardware and existing software infrastructure.
  • Answer aloud and timed: Walk me through your process for performing a root-cause analysis on a recurring software bug.

Real-World Scenarios

Conversations will shift to handling specific, real-world scenarios relevant to the role.

What to demonstrate

  • Conversations will shift to handling specific, real-world scenarios relevant to the role
  • Depth in Deployment Engineering

How to prepare

  • Answer aloud and timed: How do you prioritize tasks when faced with conflicting requirements from hardware and software teams?
  • Answer aloud and timed: Describe a situation where you had to quickly learn a new technology or tool to solve a critical project blocker.

Where candidates lose points

Quantify your impact

When discussing past roles, use metrics to describe your success. Instead of saying "I fixed bugs," say "I reduced system downtime by 15% through optimized communication protocols."

Show your work

When answering technical questions, explain your thought process out loud. Interviewers at Geekplus Australia Pty are just as interested in how you arrive at a solution as they are in the solution itself.

Research the product

Spend time understanding the specific types of AMRs and warehouse systems Geekplus Australia Pty builds. Having domain knowledge will demonstrate your genuine interest.

Do not underestimate the importance of soft skills

Even the most technically gifted engineer will struggle if they cannot communicate their ideas effectively to a global, cross-functional team.

Questions & practice

Diff a projection against the primary without per-row point reads

Hard · reconciliation · range hashing · throttling

The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.

Approach

  1. Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
  2. Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
  3. For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
  4. Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.

Follow-up

  • The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
  • Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

  1. Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
  2. Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
  3. State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
  4. Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

  • The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
  • A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

Collapse a redelivered event batch into per-aggregate high-water marks

Easy · hashing · at-least-once · aggregation

You drain a batch of up to 5,000,000 events, each (aggregate_id BIGINT, aggregate_version INT, event_type, payload). The log guarantees order within one aggregate only; the batch merges 64 partitions, and a relay failover has redelivered a range, so an older version for an aggregate can appear after a newer one. Given a map of last_applied_version per aggregate, produce the events worth applying, at most one per (aggregate_id, version), plus the count discarded. Target O(n) time. State the memory for 2,000,000 distinct aggregates and what you do when it does not fit.

Approach

  1. One pass, one hash map from aggregate_id to the highest version kept, and a discard counter. An event whose version is at or below last_applied_version for its aggregate is dropped without further work, which is the whole reason the event carries its version rather than a delta. O(n) expected time, O(d) space in distinct aggregates.
  2. Keep the maximum, never the last occurrence. The redelivered range means the final appearance of an aggregate in the batch can be an older version than one seen earlier in the same batch, so last-wins applies stale state over newer state and the projection regresses with no error anywhere.
  3. Cost the memory instead of calling it large: an 8-byte key plus a 4-byte version is 12 bytes of payload, and an open-addressed table held at a 0.7 load factor costs roughly 17 bytes per entry before per-slot metadata, so 2,000,000 aggregates is tens of megabytes in a native layout and several times that in a runtime that boxes both key and value.
  4. If the distinct set exceeds memory, partition on hash(aggregate_id) mod P and reduce each partition independently. Every event for one aggregate hashes to the same partition, so the per-partition result is exact and the merge is concatenation rather than a second reduction.

Follow-up

  • The payload is a patch rather than a snapshot, so applying only the highest version loses the intermediate changes. What changes in your reduction?
  • How do you detect that version 7 arrived while version 6 was never delivered, and what should the consumer do about the gap?

Explain why the owner filter ignores the listing index

Medium · composite index · query plans · sort elimination

The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.

Approach

  1. Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
  2. For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
  3. Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
  4. Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.

Follow-up

  • 90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
  • A dashboard runs this for 40 owners in one page load. What changes about the design?

Stop tag and share joins from fanning out a page

Medium · join fan-out · semi-joins · many-to-many

resource_tag is (resource_id, tag_id) with PK (resource_id, tag_id); resource_share is (resource_id, shared_with_user_id, permission). The tagged-and-shared listing inner-joins resource to both, filters tenant_id, tag_id = ANY($2) and shared_with_user_id = $3, orders by updated_at DESC and takes 50. Pages come back with fewer than 50 distinct resources and the total in the header is far too high. Explain the row multiplication, rewrite both the page query and the count query so each is correct, and name the index each one needs. PostgreSQL 16.

Approach

  1. Do the arithmetic against the predicates that are actually there. An inner join emits one row per matching child row, and both joins are filtered: tag_id = ANY($2) admits only the requested tags, shared_with_user_id = $3 admits one user's share rows. So a resource holding three of the requested tags and shared with $3 once yields three rows, not one — the multiplier is its count of matching tags times its share rows for that single user, and that second factor is 1 unless the table admits duplicate (resource_id, shared_with_user_id) pairs. LIMIT 50 then limits rows rather than resources, and COUNT(*) counts pairs — the header is the product, not the population.
  2. Reject DISTINCT as the fix. It deduplicates after the product has been built, so the planner must materialise and sort the fanned-out set before the LIMIT can apply, and it leaves any SUM or AVG in the same select list wrong.
  3. Rewrite both filters as semi-joins, keeping resource as the only row source: AND EXISTS (SELECT 1 FROM resource_tag rt WHERE rt.resource_id = r.resource_id AND rt.tag_id = ANY($2)) and the same shape against resource_share. A semi-join stops at the first match per resource and preserves the driving index order, so ORDER BY updated_at DESC, resource_id DESC LIMIT 50 still stops after 50 rows.
  4. Count with the same predicates and no join at all: SELECT count(*) FROM resource r WHERE r.tenant_id = $1 AND r.status = 'active' AND EXISTS (...) AND EXISTS (...). Nothing multiplies a resource, so the number is the population.

Follow-up

  • The filter changes from 'any of these tags' to 'all of these tags'. Rewrite it and state what it costs relative to the ANY form.
  • A resource can be shared with the same user twice under different permissions. Does your count change, and should it?

What experience do you have with ROS (Robot Operating System) or similar middleware architectures?

Medium · Technical & Domain Expertise

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

How do you optimize software performance for resource-constrained embedded systems?

Medium · Technical & Domain Expertise

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

Walk me through your process for performing a root-cause analysis on a recurring software bug.

Medium · Problem-Solving & Engineering Logic

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

Describe a situation where you had to quickly learn a new technology or tool to solve a critical project block

Medium · Problem-Solving & Engineering Logic

Describe a situation where you had to quickly learn a new technology or tool to solve a critical project blocker.

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

How do you ensure that your code is maintainable and scalable for future deployments?

Medium · Problem-Solving & Engineering Logic

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

Explain your approach to debugging a system failure in a production environment where physical robots are invo

Medium · Technical & Domain Expertise

Explain your approach to debugging a system failure in a production environment where physical robots are involved.

Approach

  1. Establish what changed and when, before forming any theory.
  2. Pick a bisection that eliminates candidates whichever way it turns out.
  3. Check the instrumentation before believing the symptom.
  4. Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

  • What would you look at first, and what would it rule out?
  • How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the rounds and topics Geekplus Australia Pty candidates report.

Day 1 — Map the Geekplus Australia Pty loop

  • Write out the reported sequence: Initial Screening, Technical Dives, Team Discussions, Real-World Scenarios.
  • For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 4 reported rounds, with the weakest marked.

Day 2 — Work Deployment Engineering

  • Spend the session on Deployment Engineering, which Geekplus Australia Pty candidates report being tested on.
  • Write one worked example in Deployment Engineering and time yourself on it.

Deliverable: One timed worked example in Deployment Engineering.

Day 3 — Work Hardware Integration

  • Spend the session on Hardware Integration, which Geekplus Australia Pty candidates report being tested on.
  • Write one worked example in Hardware Integration and time yourself on it.

Deliverable: One timed worked example in Hardware Integration.

Day 4 — Work Software Engineering (General)

  • Spend the session on Software Engineering (General), which Geekplus Australia Pty candidates report being tested on.
  • Write one worked example in Software Engineering (General) and time yourself on it.

Deliverable: One timed worked example in Software Engineering (General).

Day 5 — Answer out loud: Technical & Domain Expertise

  • Answer aloud, timed: How do you handle communication latency between central control software and on-board hardware?
  • Answer aloud, timed: Explain your approach to debugging a system failure in a production environment where physical robots are involved.

Deliverable: Spoken answers to 2 reported Technical & Domain Expertise question(s), under time.

Day 6 — Answer out loud: Problem-Solving & Engineering Logic

  • Answer aloud, timed: Walk me through your process for performing a root-cause analysis on a recurring software bug.
  • Answer aloud, timed: How do you prioritize tasks when faced with conflicting requirements from hardware and software teams?

Deliverable: Spoken answers to 2 reported Problem-Solving & Engineering Logic question(s), under time.

Day 7 — Answer out loud: Behavioral & Communication

  • Answer aloud, timed: How do you approach collaboration when working with teams in different time zones?
  • Answer aloud, timed: Tell me about a time you had to advocate for a specific technical solution despite pushback from other team members.

Deliverable: Spoken answers to 2 reported Behavioral & Communication question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

How do you handle communication latency between central control software and on-board hardware?

Medium · Technical & Domain Expertise

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Describe a time you had to troubleshoot an integration issue between new hardware and existing software infras

Medium · Technical & Domain Expertise

Describe a time you had to troubleshoot an integration issue between new hardware and existing software infrastructure.

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you prioritize tasks when faced with conflicting requirements from hardware and software teams?

Medium · Problem-Solving & Engineering Logic

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you approach collaboration when working with teams in different time zones?

Medium · Behavioral & Communication

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Tell me about a time you had to advocate for a specific technical solution despite pushback from other team me

Medium · Behavioral & Communication

Tell me about a time you had to advocate for a specific technical solution despite pushback from other team members.

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you manage stress when facing a tight deadline for a client site deployment?

Medium · Behavioral & Communication

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?