cswork / libraryOpen practice workspace

Interview guides · Gai Consultants

Gai Consultants Software Engineer Interview Guide

Gai Consultants Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

The Software Engineer role at Gai Consultants is pivotal in developing innovative solutions that enhance the company's engineering capabilities. As a Software Engineer, you will engage with cutting-edge technologies to design, implement, and maintain software systems that drive efficiency and effectiveness in engineering projects. This position is critical not only for the technical expertise you bring but also for the collaborative spirit you foster while working with multidisciplinary teams. Your contributions will directly impact various engineering sectors, including civil, electrical, and environmental engineering. You will play a key role in projects like the AP1000 nuclear reactor, where software solutions are integral to ensuring operational safety and compliance.

This guide is scoped to a Software Engineer candidate at Gai Consultants.

Focus areas

  • Software Engineering
  • Engineering Domain Knowledge (AP1000 Nuclear Plant)
  • Communication Skills

The Gai Consultants interview process

Gai Consultants candidates report 3 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening Call

A call with a recruiter to assess initial fit and discuss the role.

What to demonstrate

  • A call with a recruiter to assess initial fit and discuss the role
  • Depth in Software Engineering

How to prepare

  • Be able to walk your CV end to end in two minutes, and say why this company specifically.
  • Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Interview

An interview focusing on your technical skills and past experiences.

What to demonstrate

  • An interview focusing on your technical skills and past experiences
  • Depth in Software Engineering

How to prepare

  • Answer aloud and timed: How do you ensure the quality and reliability of your code?
  • Answer aloud and timed: Explain the software development lifecycle and your experience with Agile methodologies.

Behavioral Interview

An interview with hiring managers to evaluate cultural fit and alignment with company values.

What to demonstrate

  • An interview with hiring managers to evaluate cultural fit and alignment with company values
  • Depth in Software Engineering

How to prepare

  • Prepare three examples from your own work, each with a decision you made and an outcome you can quantify.
  • Re-read the description of the behavioral interview above and write down what you would ask to confirm before it.

Where candidates lose points

Be prepared to discuss your portfolio

Showcasing your previous projects can help demonstrate your practical experience and technical skills.

Practice coding problems

Familiarize yourself with common coding challenges and algorithms to enhance your confidence during technical assessments.

Understand Gai's culture

Research the company's values and mission to align your answers with what matters most to the organization.

Ask insightful questions

Prepare thoughtful questions about the team dynamics and project management approaches to show your interest and engagement.

Questions & practice

Write a function to reverse a linked list.

Medium · Coding / Algorithms

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

How would you implement a search algorithm in a large dataset?

Medium · Coding / Algorithms

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Can you explain the difference between depth-first and breadth-first search?

Medium · Coding / Algorithms

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

  1. One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
  2. Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
  3. State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
  4. Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.

Follow-up

  • A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
  • Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?

Denormalise tenant onto revisions and backfill it live

Hard · denormalisation · online migration · backfill

resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.

Approach

  1. Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
  2. Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
  3. Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
  4. Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.

Follow-up

  • The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
  • How do you verify the backfill actually finished, given rows are still being inserted while it runs?

What programming languages are you most proficient in and how have you applied them in your projects?

Medium · Technical / Domain Questions

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

Describe a challenging technical problem you faced and how you resolved it.

Medium · Technical / Domain Questions

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

How do you ensure the quality and reliability of your code?

Medium · Technical / Domain Questions

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

What tools and technologies do you prefer for version control and why?

Medium · Technical / Domain Questions

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

If tasked with improving a software tool that is experiencing performance issues, how would you approach the p

Medium · Problem-Solving / Case Studies

If tasked with improving a software tool that is experiencing performance issues, how would you approach the problem?

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

How would you design a software solution for a new engineering project with minimal requirements?

Medium · Problem-Solving / Case Studies

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

What steps would you take to troubleshoot a critical system failure?

Medium · Problem-Solving / Case Studies

Approach

  1. Establish what changed and when, before forming any theory.
  2. Pick a bisection that eliminates candidates whichever way it turns out.
  3. Check the instrumentation before believing the symptom.
  4. Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

  • What would you look at first, and what would it rule out?
  • How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the rounds and topics Gai Consultants candidates report.

Day 1 — Map the Gai Consultants loop

  • Write out the reported sequence: Initial Screening Call, Technical Interview, Behavioral Interview.
  • For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 3 reported rounds, with the weakest marked.

Day 2 — Work Software Engineering

  • Spend the session on Software Engineering, which Gai Consultants candidates report being tested on.
  • Write one worked example in Software Engineering and time yourself on it.

Deliverable: One timed worked example in Software Engineering.

Day 3 — Work Engineering Domain Knowledge (AP1000 Nuclear Plant)

  • Spend the session on Engineering Domain Knowledge (AP1000 Nuclear Plant), which Gai Consultants candidates report being tested on.
  • Write one worked example in Engineering Domain Knowledge (AP1000 Nuclear Plant) and time yourself on it.

Deliverable: One timed worked example in Engineering Domain Knowledge (AP1000 Nuclear Plant).

Day 4 — Work Communication Skills

  • Spend the session on Communication Skills, which Gai Consultants candidates report being tested on.
  • Write one worked example in Communication Skills and time yourself on it.

Deliverable: One timed worked example in Communication Skills.

Day 5 — Answer out loud: Technical / Domain Questions

  • Answer aloud, timed: What programming languages are you most proficient in and how have you applied them in your projects?
  • Answer aloud, timed: Describe a challenging technical problem you faced and how you resolved it.

Deliverable: Spoken answers to 2 reported Technical / Domain Questions question(s), under time.

Day 6 — Answer out loud: Behavioral / Leadership Questions

  • Answer aloud, timed: Describe a time you had to work with a difficult team member. How did you handle it?
  • Answer aloud, timed: How do you prioritize tasks when working on multiple projects?

Deliverable: Spoken answers to 2 reported Behavioral / Leadership Questions question(s), under time.

Day 7 — Answer out loud: Problem-Solving / Case Studies

  • Answer aloud, timed: If tasked with improving a software tool that is experiencing performance issues, how would you approach the problem?
  • Answer aloud, timed: How would you design a software solution for a new engineering project with minimal requirements?

Deliverable: Spoken answers to 2 reported Problem-Solving / Case Studies question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Explain the software development lifecycle and your experience with Agile methodologies.

Medium · Technical / Domain Questions

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Describe a time you had to work with a difficult team member. How did you handle it?

Medium · Behavioral / Leadership Questions

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you prioritize tasks when working on multiple projects?

Medium · Behavioral / Leadership Questions

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Can you provide an example of how you’ve contributed to a team’s success?

Medium · Behavioral / Leadership Questions

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

What motivates you to perform well in your role?

Medium · Behavioral / Leadership Questions

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you handle feedback and criticism?

Medium · Behavioral / Leadership Questions

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?