Interview guides · G-Research

G-Research Machine Learning Engineer Interview Questions & Guide 2026

G-Research Machine Learning Engineer interview guide: reported rounds, practice questions with worked solutions and a 7-day prep plan.

The 60-second brief

A Machine Learning Engineer at G-Research sits at the intersection of high-frequency data analysis and cutting-edge computational research. The primary objective of this role is to build, scale, and optimize the sophisticated models that power the firm’s predictive capabilities. You will not just be applying standard libraries; you will be pushing the boundaries of how machine learning can be applied to massive, complex financial datasets to generate actionable alpha.

State every complexity claim with the assumption sitting under it. Hash lookup is O(1) on average and only for a hash that spreads your actual keys; comparison-based sorting cannot beat n log n, though counting or radix sort can when the keys are bounded integers.

Focus areas

Make every write idempotent under retry
Paginate large result sets with keyset cursors
Trace a symptom to a mechanism under load

Overview

This role is critical to the firm’s competitive edge. You will work within an environment that demands both extreme technical rigor and a pragmatic approach to problem-solving. Whether you are focusing on model architecture, training efficiency, or the underlying infrastructure of machine learning workflows, your work directly influences the performance and scalability of the firm’s quantitative strategies.

G-Research values candidates who can demonstrate deep theoretical understanding alongside the ability to optimize models for real-world, resource-constrained environments.

The G-Research interview process

G-Research candidates report 3 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

The person on this call usually cannot evaluate your code and does not need to. They write a short paragraph, and that paragraph is what a hiring manager skims when deciding who to put on your loop. So the test is not whether your work was hard, it is whether a non-engineer can repeat it correctly. Name systems by what they did rather than by their internal codename, give each project a shape (what was breaking, what you changed, what happened after), and keep the whole walkthrough near ninety seconds. Depth that cannot survive a paraphrase reads as vagueness.

What to demonstrate

Whether a non-engineer can restate your projects without distorting them, since their paraphrase is what travels to the hiring manager, not your sentences
Whether each project has a shape rather than a stack list: the failure or constraint, the change you made, the result and how it was measured
Whether you can say what was yours inside a team project without either inflating it or disappearing into the plural

How to prepare

Rewrite each headline project as two sentences with no internal system names and no acronyms outside your company, then say them to someone outside engineering and have them repeat them back. Fix whatever came back wrong
Attach one measured number to each project: the baseline, the change, and the window it was measured over. Where nothing was ever measured, say that plainly rather than reaching for a plausible percentage
Time the background walkthrough against a clock. If it runs past two minutes, compress the earliest role to a single clause and spend the recovered time on the most recent one

Technical Assessments

Input bounds are the part of the prompt most often skimmed, and they usually contain the answer. They tell you which complexity class is admissible, which narrows the search before you have thought about the problem itself. As a rough planning figure, a compiled language does on the order of 10^8 simple operations per second and an interpreted one roughly an order of magnitude less. So n up to about twenty admits enumerating subsets, a few thousand admits a quadratic pass, and a million admits neither: you need near-linear, or linear with a log factor. If the bounds are missing, ask for them.

What to demonstrate

Whether the approach is justified by the stated input size rather than by whichever pattern you recognised first
Whether you ask about the properties that change the algorithm: whether the input arrives sorted, whether duplicates occur, whether values are bounded integers, whether it all fits in memory
Whether you can name the bottleneck in your own solution and what would remove it, even when you deliberately leave it in place
Whether a claimed speedup is real, since memoising a recursion only helps when subproblems genuinely overlap and the state can be keyed cheaply

How to prepare

For each algorithm you rely on, write down the largest n it handles in roughly a second, then check two of those figures by timing them in the language you will actually type in
For two weeks, write one line naming your target complexity and the bound that justifies it before you write any code, then compare that line with what you ended up submitting
Practise the conversion backwards: given a required O(n log n), list the mechanisms that get you there (sorting, a heap, an ordered map, divide and conquer) and choose by what the problem needs to query, not by what you used last

Technical Interviews

What to demonstrate

Whether the approach is justified by the stated input size rather than by whichever pattern you recognised first
Whether you ask about the properties that change the algorithm: whether the input arrives sorted, whether duplicates occur, whether values are bounded integers, whether it all fits in memory
Whether you can name the bottleneck in your own solution and what would remove it, even when you deliberately leave it in place
Whether a claimed speedup is real, since memoising a recursion only helps when subproblems genuinely overlap and the state can be keyed cheaply

How to prepare

For each algorithm you rely on, write down the largest n it handles in roughly a second, then check two of those figures by timing them in the language you will actually type in
For two weeks, write one line naming your target complexity and the bound that justifies it before you write any code, then compare that line with what you ended up submitting
Practise the conversion backwards: given a required O(n log n), list the mechanisms that get you there (sorting, a heap, an ordered map, divide and conquer) and choose by what the problem needs to query, not by what you used last

Where candidates lose points

Letting a slow dependency consume unbounded concurrency

The failure that takes a service down is usually not an error but a delay. A dependency answering in thirty seconds instead of fifty milliseconds holds each request's worker or connection six hundred times longer, and since required concurrency is arrival rate times latency, a fleet sized for sixty in-flight requests now needs thirty-six thousand to sustain the same rate - so it queues, and requests whose clients have already abandoned them still occupy resources. Retries make it precisely worse: a policy of three attempts triples the load on a dependency at the exact moment it is least able to serve, which is how one slow dependency becomes an outage of everything sharing that pool. Containment is four specific things - a timeout on every outbound call shorter than the caller's remaining budget, a bounded pool per dependency so one cannot starve the others, backoff with full jitter rather than a fixed delay so retries do not resynchronise, and a circuit that stops sending once the failure rate makes an attempt pointless.

Assuming an isolation level prevents the anomaly you actually have

Isolation levels are named by the SQL standard but implemented differently, so any claim about one is only true of a named engine. PostgreSQL defaults to READ COMMITTED, where every statement takes a fresh snapshot, so two statements inside one transaction can legitimately disagree about the same row. Its REPEATABLE READ is snapshot isolation: it removes non-repeatable and phantom reads but permits write skew, where two transactions each read a set, each conclude their own write is safe, both commit, and the combined result violates a constraint that no single row expresses. Only SERIALIZABLE closes that, and it closes it by aborting a transaction with a serialization failure (SQLSTATE 40001), which means the guarantee is theoretical unless the application has a retry loop. InnoDB's REPEATABLE READ is a different mechanism again - plain SELECTs read a consistent snapshot while locking reads and writes see the latest committed row - so a read-modify-write inside one transaction can act on a value that the transaction's own earlier SELECT never returned.

Trusting input because it came from your own front end

Anything crossing a trust boundary is hostile: parameterise queries instead of building SQL by concatenation, validate against an allow-list rather than a deny-list, and bound the size of anything you allocate from a request. Raising this unprompted in an API or design question is a cheap and unusually strong signal.

Arguing past a hint

When the interviewer asks what happens for a particular input or floats a different data structure, stop and take it seriously; it is almost always a correction rather than idle curiosity. Talking over it converts a recoverable wrong turn into a data point about how you handle review.

Questions & practice

Explain the impact of different hyperparameter choices on model convergence and stability.

Medium · machine learning fundamentals

Approach

Name the simplest model that could work and what would make you move past it.
State the learning problem: the label, the unit of prediction and how the model is used.
Pick the metric from the cost of each error type, not from habit.

Follow-up

What changes if the classes are heavily imbalanced?
Where could label leakage enter this setup?

Explain the time and memory complexity of a standard neural network architecture.

Medium · machine learning fundamentals

Approach

Name the simplest model that could work and what would make you move past it.
Say how you would validate it, and where leakage could enter the split.
State the learning problem: the label, the unit of prediction and how the model is used.

Follow-up

How would you know the model is overfitting?
What changes if the classes are heavily imbalanced?

What are the trade-offs between different attention mechanisms in terms of computational overhead?

Medium · machine learning fundamentals

Approach

Name the simplest model that could work and what would make you move past it.
Pick the metric from the cost of each error type, not from habit.
Say how you would validate it, and where leakage could enter the split.

Follow-up

What changes if the classes are heavily imbalanced?
How would you know the model is overfitting?

Implement specific optimization routines from scratch to demonstrate understanding of the underlying mechanics.

Medium · coding and algorithms

Approach

Walk one small example through your approach before writing the whole thing.
Restate the input: its shape, its size, and what is guaranteed about it.
Name the brute-force solution and its complexity before improving on it.

Follow-up

Which test case would catch an off-by-one here?
How does this change if the input no longer fits in memory?

Discuss the trade-offs between different data structures for storing and retrieving large-scale features.

Medium · coding and algorithms

Approach

Choose the data structure from the access pattern, not from familiarity.
Name the brute-force solution and its complexity before improving on it.
Walk one small example through your approach before writing the whole thing.

Follow-up

What is the worst case, and how likely is it on real data?
How does this change if the input no longer fits in memory?

Solve standard competitive programming style problems (e.g., LeetCode-style).

Medium · coding and algorithms

Approach

State the target complexity and say which constraint rules the naive version out.
Walk one small example through your approach before writing the whole thing.
Name the brute-force solution and its complexity before improving on it.

Follow-up

How does this change if the input no longer fits in memory?
What is the worst case, and how likely is it on real data?

Identify the heaviest tenants in a five-minute window under memory pressure

Medium · top-k · heavy hitters · streaming

The edge service handles about 3,000 requests per second across roughly 50,000 tenants, peaking near 9,000. Expose the 50 heaviest tenants by request count over the trailing five minutes so limits can be tightened before one tenant's backfill starves the fleet. You may not retain five minutes of raw records. Give the exact solution and its memory, then the bounded-memory approximation with its error stated as a formula, and say which you would ship and at what tenant cardinality that choice changes.

Approach

Do the exact version first, because it is affordable at this cardinality: a ring of 300 one-second counters per tenant, advanced lazily, is 1,200 bytes of counters per tenant and roughly 60 to 90 MB for 50,000 tenants with overhead. Carry a running total and subtract the bucket you overwrite so a window read is O(1) rather than 300 adds.
Extract the top 50 with a size-k min-heap over the tenant sums: O(d log k) for d tenants, against O(d log d) to sort them all. Maintaining the heap continuously instead of on query requires a tenant-to-heap-index map, because incrementing a count already inside the heap means sifting from a known position, and without that map you rebuild the heap on every request.
State the approximation precisely rather than gesturing at sketches. Misra-Gries with m counters retains every item whose true count exceeds N/(m+1), and each retained count underestimates the truth by at most N/(m+1). With m = 1,000 and N = 900,000 requests in the window the error is roughly 900 requests, which is fine for spotting a tenant sending 50,000 and useless for ranking two tenants 200 apart.
Say what breaks when the window slides: Misra-Gries and Space-Saving are insert-only and cannot be decremented as records age out. The workable construction is one summary per sub-window, say ten seconds, with 30 summaries merged at query time, and the merged error is the sum of the per-summary errors, so the bound degrades linearly in the number of sub-windows.
Choose and defend it: at 50,000 tenants the exact rings cost under 100 MB in a process that already holds more, so ship exact. Keep the sketch for the case that actually motivates it, a per-principal or per-IP key where cardinality runs to millions and is not bounded by anything you control.
Raise the fleet problem before it is asked: each of 20 to 40 instances sees only its share, and the top 50 of one shard is not the top 50 of the fleet. Either aggregate counts centrally or accept that a per-instance threshold multiplied by instance count is the limit you are really enforcing.

Worked solution (25 min)

Size the exact structure: 300 one-second counters per tenant across 50,000 tenants, plus the running-total trick that makes a window read O(1).
Write the top-k extraction with a size-50 min-heap and compare its complexity against sorting all 50,000 sums.
Substitute N = 900,000 and m = 1,000 into N/(m+1) and state in requests what the sketch can and cannot distinguish.
Write the sub-window merge for the sliding case and state the resulting bound for 30 merged summaries.

Expected result: An exact per-tenant ring of 300 one-second counters at roughly 60 to 90 MB for 50,000 tenants with O(1) window reads, top-50 extraction by a size-k min-heap in O(d log k), a Misra-Gries bound of N/(m+1) with the numbers substituted, the sub-window merge needed to slide it, and a decision to ship exact at this cardinality with the sketch reserved for unbounded keys.

Verify it yourself

The exact window sum for one tenant equals a replay of its raw records over the same five minutes.
The heap result matches a full sort of the tenant sums on a sample.
The sketch's count for a known heavy tenant is at most the true count and no less than the true count minus N/(m+1).

Follow-up

The heaviest tenant is heavy because of one export job rather than user traffic. Should the limiter treat those as the same tenant?
Two tenants sit tied at the boundary of the top 50. Does your answer flap, and does the flapping matter?
You switch to per-principal keys and cardinality goes to 10 million. Walk through what changes.

Keep soft-deleted accounts from blocking re-registration

Easy · soft delete · unique constraints · engine differences

app_user holds user_id, tenant_id, email CITEXT, password_hash (NULL for SSO principals), email_verified_at, auth_version, status ('invited','active','suspended','deactivated'), created_at, updated_at, deleted_at. Two live accounts for one address inside a tenant must be impossible, but an address freed by a soft delete must be reusable, and the same tenant may delete and re-register it repeatedly. Write the uniqueness DDL for PostgreSQL 16, then the equivalent for MySQL 8 where partial indexes do not exist, and say what each permits once three deleted rows already hold that address.

Approach

Start from what is actually unique: not (tenant_id, email), but (tenant_id, email) among live rows. PostgreSQL says that directly — CREATE UNIQUE INDEX app_user_live_email ON app_user (tenant_id, email) WHERE deleted_at IS NULL. A full constraint over the same two columns burns the address permanently the first time someone deletes an account.
Keep case-insensitivity in the type or the index, never in the application: CITEXT as given, or UNIQUE (tenant_id, lower(email)) as an expression index where the extension is unavailable. A case-sensitive unique column is exactly how two accounts for one human appear.
For MySQL 8 the predicate has to move inside the key: add a discriminator column that is a constant 0 while the row is live and is set to user_id on delete, with UNIQUE (tenant_id, email, deleted_marker). Live rows share the constant and still collide; deleted rows differ from each other and stop colliding.
State the NULL variant and its dependency: leaving the marker NULL for deleted rows also works, because a unique index treats NULLs as distinct — true in MySQL, and true in PostgreSQL only under the default NULLS DISTINCT, which PostgreSQL 15 lets you reverse. Check the polarity against the three existing deleted rows: constant-on-live is what preserves the collision you want, and reversing it silently admits duplicate live accounts.
Say what a soft delete must do besides setting deleted_at: increment auth_version so existing tokens stop validating, leave resource.owner_user_id and resource_revision.actor_user_id intact, and accept that the address is retained — erasure is a different requirement answered by scrubbing the column, not by a DELETE that would break those references.

Worked solution (20 min)

Create the PostgreSQL partial unique index, insert a live row, soft delete it, and insert the same address again.
Repeat the delete-and-reinsert cycle three times and confirm three deleted rows coexist with exactly one live row.
Write the MySQL form with the discriminator, then deliberately reverse the polarity so live rows carry NULL, and show two live duplicates commit.
Attempt a second live insert on both engines and map the resulting 23505 / ER_DUP_ENTRY to the 409 the handler should return.

Expected result: PostgreSQL rejects only the second live row and admits unlimited deleted ones. MySQL behaves identically with UNIQUE (tenant_id, email, deleted_marker) where live = 0; with the polarity reversed, two live rows commit and nothing afterwards can tell them apart.

Verify it yourself

Group live rows by (tenant_id, lower(email)) after a randomised insert/delete run — no group exceeds one.
Inserting 'User@x.test' after 'user@x.test' is rejected; if it is accepted, the case handling is in application code rather than in the index.
EXPLAIN a login lookup and confirm the partial index is chosen — it is only usable by queries that carry the deleted_at IS NULL predicate, so a query without it falls back to a scan.

Follow-up

A deleted account re-registers with the same address the next day. Do the old resource rows follow the new user_id, and how does the API keep the two principals apart?
How do you honour an erasure request while resource_revision.actor_user_id still references this table?
What changes if a user may hold membership in two tenants?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.
For the job case the invariant is expressible per row, so let the database hold it: a partial unique index on job_run (tenant_id, job_type) WHERE status IN ('queued','running') makes a second running export unwritable and the loser takes 23505, mapped to 409. That is strictly better than a counter — no drift, no reconciliation — and it is available only because the cap is one rather than fifty.
Add the retry discipline each route demands: under SERIALIZABLE both 40001 and deadlock 40P01 are retryable and the retry must re-execute the read, while under READ COMMITTED with the counter nothing retries, because the conflict is reported to the caller rather than raised as an error.

Follow-up

A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?
How do you detect after the fact that the counter drifted, without locking the table?

How do you optimize memory usage when training deep learning models on high-dimensional data?

Medium

Approach

State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Clarify what is being asked and what a complete answer contains.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

How would you derive eigenvalues for a given matrix system?

Medium

Approach

Work from the requirement backwards to the design.
State your assumptions explicitly before working the problem.
Clarify what is being asked and what a complete answer contains.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

Give the resource write endpoints a failure taxonomy clients can act on

Easy · error taxonomy · status codes · retries

Two callers use POST and PATCH /v1/resources: a server-side SDK that retries automatically, and a browser app that shows the user a message. Today every failure is a 500 carrying prose. Define the error contract for a malformed body, a field that fails validation, an expired token, a token whose auth_version no longer matches, a resource_id owned by another tenant, a version mismatch on update, an idempotency key reused with a different body, an exceeded tenant quota, and a read replica that has not caught up. Deliverable: the envelope, the status per case, and what each caller does.

Approach

Split the envelope by audience: a stable code enum for programs, a message documented as human-only and free to change wording, a request_id that joins to resource_revision.request_id and the trace, and a details array of field paths for validation failures. Publish the negative rules too - clients never branch on message, and an unrecognised code falls back to the status class.
Assign status by who has to change something. 400 for bytes that do not parse, 422 for a body that parses and violates a rule, 401 for a token that no longer authenticates - expiry and an auth_version mismatch are the same instruction, re-authenticate - 403 for a scope the principal lacks, 404 rather than 403 for another tenant's resource_id because 403 confirms the id exists, 412 for a failed If-Match (409 if the version travels in the body instead), 422 for a key reused with a different fingerprint, 429 for quota.
Derive retryability from whether the outcome is unknown, not from the status number. A timeout or a 5xx on a write is unknown - the transaction may have committed and the response lost - so the only safe retry is one carrying the same idempotency key. Every 4xx except 429 is deterministic, and retrying it only spends the caller's remaining deadline.
Refuse to model replica lag as an error. Read-after-write is held by pinning the session to the primary for a short window, not by a 404 the SDK retries into a loop; if staleness must be visible, expose it as a watermark on a 200, because a failure code invites a retry that cannot fix it.
Write both caller behaviours into the published contract: the SDK retries only 429, 503 and timeouts, with capped backoff and full jitter bounded by the deadline it was given; the browser stops and shows message, except on 412, where it must re-read the resource and rebase the edit rather than resubmit.

Worked solution (20 min)

Write the envelope as four named fields and state which are present on every error response without exception.
Fill a nine-row table: condition, status, code string, retryable yes/no, and the schedule or the reason a retry cannot help.
For each retryable row, name what makes the retry safe - HTTP method semantics, or an idempotency key.
Write the two caller policies as pseudocode: which codes the SDK retries, and what the browser does on 412 and on 429.

Expected result: An envelope with a code enum, a human message, a request_id and per-field details; nine conditions mapped to distinct statuses; retry advice attached to the outcome rather than to the status class; replica lag handled as consistency, not as an error.

Verify it yourself

Every row marked retryable names the mechanism that makes repeating it safe.
A resource_id from another tenant and a resource_id that does not exist are indistinguishable from outside.
Adding a new code does not change any existing code's meaning or any status already published.

Follow-up

A customer reports two resources created from one click. Which of your status codes could have produced that, and what in the contract permitted the client's reading?
You need a tenth error code next quarter without a version bump. What must v1 already have said for that to be non-breaking?

One customer endpoint stalls deliveries to every other destination

Medium · bulkhead · timeouts · saturation · retry amplification

The egress service delivers about 1.5k webhooks/second across 40,000 destinations, with a per-destination concurrency cap of 4 and a 10-second connect-plus-read timeout. Throughput falls to 300/second, queue depth climbs, and p99 delivery latency for unaffected destinations goes from 200 ms to minutes, while the error rate barely moves. One tenant holds 900 destination rows whose URLs share a hostname that now answers in 9.5 seconds. Explain the mechanism with the arithmetic, then give the containment in the order you would apply it.

Approach

Look at saturation before errors. A flat error rate with collapsing throughput says nothing is failing, things are waiting, so the first signal to pull is in-flight request count or pool wait time rather than the error counter. This is the distinction that decides the whole investigation.
Group in-flight work by resolved host, not by destination id. The cap is keyed per destination row, so 900 rows sharing one hostname buy 3,600 concurrent slots against a single host, each held for 9.5 seconds. The bulkhead was never a bulkhead for that host, and grouping by the wrong dimension is why the dashboard looked healthy.
Do the arithmetic in both directions. Required concurrency is arrival rate times latency, so 1.5k/second at 200 ms needs about 300 in flight, which is entirely consumed by 3,600 slow slots; conversely whatever concurrency is left sustains rate equals concurrency divided by 9.5 seconds, which is the 300/second you are seeing. Matching both numbers is what promotes this from a plausible story to the mechanism.
Explain why the circuit breaker never helped. It opens on consecutive failures, and a 9.5-second response inside a 10-second timeout is a success. Slow is not failing, so an error-rate breaker cannot see this; you need a slow-call ratio, a deadline propagated from the caller's remaining budget, or a concurrency limiter.
Contain in order: park the offending host so the shared pool drains, add a per-resolved-host concurrency cap alongside the per-destination one, give slow hosts their own queue so they cannot occupy the general pool, derive the timeout from the delivery deadline rather than a round number, and check the retry policy is not tripling load on a host that is already slow. Use backoff with full jitter so retries do not resynchronise on recovery.
State the invariant you are restoring: one tenant's endpoints degrade only that tenant's deliveries. That is a property to load-test for, not to assume from a config value.

Follow-up

The host recovers to 80 ms. How long does the queue take to drain, and what does the drain do to the recovered host?
Where should the 10-second timeout number actually come from?
If that tenant had one destination row instead of 900, would the cap of 4 have saved you? What would you measure to be sure?

Suggested practice checklist

Four days sample coding, design, fundamentals and the practical rounds at deliberately shallow depth, which is enough to surface the topics you did not know were in scope. That map, rather than a guess made on day one, decides where the last three days go.

Day 1 — Coding, one pass at shallow depth

Solve one problem from each of six families, an array with two pointers, hash counting, binary search, a tree traversal, a graph traversal and one dynamic program, under a hard twenty-minute cap with no extensions, marking each finished, late, or stalled.
For every stall, write the exact move you could not make rather than the subject, so the note reads could not turn the recurrence into a loop rather than bad at dynamic programming.
Fix nothing today. The value of the pass is the unfixed record.

Deliverable: Six timed attempts marked finished, late or stalled, each stall carrying a named blocking move.

Day 2 — Design, one pass at shallow depth

Spend twenty minutes each on three different shapes, a read-heavy feed, a write-heavy ingest path, and something needing a transaction across two entities, stopping each at requirements, interface and data model.
After each, write the first question you could not answer, which is usually a number you could not estimate or a failure mode you had no vocabulary for.
Mark which of the three you would be most relieved not to be asked, and treat that as data rather than as a preference.

Deliverable: Three shallow designs, each with the first unanswerable question written at the bottom.

Day 3 — Fundamentals and the practical rounds

Answer eight short questions in writing at four minutes each, covering the material that fills the gaps between the big rounds: what happens between a URL and a rendered page, what an index costs on write, when a process is preferable to a thread, and what conditions a deadlock requires.
Do one thirty-minute practical task of the kind a take-home compresses: read an unfamiliar two-hundred-line file and write what it does, what you would change, and the one thing you remain unsure of.
Score every answer fluent, correct but slow, or absent, and keep the absent ones visible.

Deliverable: Eight scored short answers and one written reading of unfamiliar code.

Day 4 — The rounds that are about you, and the map

Deliver three behavioural answers aloud against a timer, a conflict, a failure you owned, and a decision made without enough information, marking any that ran past three minutes or contained no number.
Assemble the map: every marked item from days one to three on a single page, sorted by how likely it is to appear in your loop rather than by how uncomfortable it felt.
Choose exactly two areas for the remaining three days and write down what you are deliberately abandoning.

Deliverable: A one-page scored map of the whole surface area with two areas chosen and the rest explicitly abandoned.

Day 5 — First chosen area, to the depth you skipped

Work the higher-ranked area in four focused blocks, choosing items one level above where you stalled rather than repeating what already works.
After each block write the rule you extracted in one sentence with its precondition attached, since a rule carrying no precondition is exactly what fails under a variation.
Re-attempt the day-one or day-two item that exposed this area and compare against the original timing.

Deliverable: Four worked blocks, a timed re-attempt against the original, and three one-sentence rules with preconditions.

Day 6 — Second chosen area, where the gap is coverage rather than speed

Treat the second area differently from the first. Day five drilled something you could already half-do; this one is usually a topic you had simply never met, so build one worked reference example end to end and keep it, rather than attempting six problems badly.
Write down the vocabulary you were missing on day two or three, five terms at most, each with the one sentence that makes it usable in an answer rather than the textbook definition.
Redo the shallow attempt that exposed this area and note whether you now fail later in the problem, because moving the failure point is the realistic gain from a single day and is worth more than a score that did not change.

Deliverable: One worked reference example for the newly covered area, a five-term vocabulary list, and a note on where the failure point moved.

Day 7 — Reassemble the loop

Sit two rounds back to back with no gap, ordering them so the area you chose second comes last, because the map was built from rested, isolated attempts and the loop will reach your weaker area when you are already spent.
Write where the second round suffered from the first, which is normally the point at which structure collapses into narration.
Reduce the week to one page holding only the rules you can state without reading them.

Deliverable: Mock notes on cross-round carryover plus a one-page card of rules you can recite from memory.

Outage answers are graded on instruments

Nobody is scoring your stamina at three in the morning. What carries weight is which signal told you something was wrong, what you measured before touching anything, what you rolled back versus what you fixed forward, and why you picked one. 'We restarted it and it went away' is a story about not knowing.

Ship under a deadline and bound the debt you chose

Medium · pagination · technical debt · tradeoffs

You have four days to ship a tenant-facing listing endpoint. The version you would defend uses keyset pagination over (tenant_id, status, updated_at DESC, resource_id DESC); the version you can finish uses LIMIT/OFFSET with no matching index. Describe a deadline call you actually made of this shape: what you shipped, what you knowingly deferred, how you bounded the damage with a mechanism rather than an intention, and the specific numeric condition that would force the follow-up. Name who you told and where you wrote it down.

Approach

Name the deferred failure precisely instead of calling it slow. OFFSET n makes the database produce and discard n rows, so cost grows with page depth; without an index matching the sort, every matching row is read and sorted before the limit applies; and rows inserted between two page fetches shift across the boundary so items are skipped or repeated with nothing in the response to signal it.
Bound the blast radius with something mechanical rather than a promise: cap maximum page depth, cap page size, restrict the endpoint to one internal caller, or keep it behind a flag. State which failure each cap removes and which it leaves standing.
Attach a number to the trigger and wire it to an alarm: the first tenant crossing N resources, or the endpoint's p99 crossing its share of the 400 ms budget, so the debt announces itself instead of waiting to be remembered.
Write it where the next engineer looks, which is the code and the ticket, not a chat message: what was deferred, why, the cap, and the trigger.
Report what actually happened in your real example, including the case where the trigger never fired and the debt was correctly never repaid.

Follow-up

At what page depth does the offset version breach your latency budget, given your page size and row counts?
What breaks first when you switch to keyset pagination later, and what does a client holding an old page token see?
Who would have overruled you if you had asked for two more days, and did you ask?

Turn a code review disagreement into a decision

Easy · code review · optimistic concurrency · communication

A colleague's change updates a row with UPDATE resource SET version = version + 1 WHERE resource_id = $1 AND version = $2 and treats an affected-row count of zero as a successful no-op. You read that as a silently lost update; they think returning 200 is friendlier to clients than returning a conflict. Describe how you have handled a review disagreement of this shape: what goes in the comment, when you leave the thread, and who decides. Then write the comment you would leave here, in under 80 words.

Approach

Sort the disagreement before writing anything. A silently discarded write is a correctness claim about data; the choice between 409 and 412 is taste. Only the first justifies blocking a merge, and saying which one you are doing is most of the value of the comment.
Make the claim reproducible in the comment itself with an interleaving rather than a principle: A reads version 7, B reads version 7, B commits version 8, A's predicate matches zero rows, A is told it succeeded and A's edit is gone.
Offer the alternative with its cost attached: return 409 carrying the current version and the revision that won, so the client can re-read and re-apply. Note that automatic retry is not the fix, because a retry re-reads the winner's state and reapplies an intent formed against data that no longer exists.
Apply an escalation rule you can state: two round trips on the thread, then a call, and the service's owner decides rather than the reviewer. A reviewer who cannot be overruled is a bottleneck with extra steps.
Close in writing wherever the decision lands, so the next reader finds the reasoning in the code or the ticket instead of in a collapsed review thread.

Follow-up

Where would you put the test that fails if someone reintroduces the swallowed zero rowcount?
The author says clients cannot handle a 409. How do you check whether that is true?
How do you handle the same review comment when the author is more senior than you and in a hurry?

Tell callers you do not own that their integration breaks

Medium · deprecation · compatibility · stakeholders

A field in a write endpoint's response must change shape. You own the endpoint; you do not own the four internal callers or the outbound webhook consumers who read it. Describe a deprecation you were responsible for: what you shipped first, how you established who was actually reading the field, the window you gave and what set its length, what you did about the consumer who never moved, and how you decided removal was safe. Name the signal you used, not the announcement you sent.

Approach

Establish the reader set empirically rather than from a wiki of owners: per-field usage counters keyed by principal, or access logs attributed to a consumer. State the blind spot of whichever you pick, since a consumer that reads the field only on a monthly job will not appear in a week of logs.
Ship additive first. Populate the new field alongside the old one so no reader is forced to move, which is also what keeps a rolling deploy safe, because old and new instances answer the same requests at the same time and a rollback must still find the old shape present.
Set the window from the slowest legitimate consumer's release cadence, not from your calendar, and decide separately what to do for a consumer with no release process at all, such as an external webhook endpoint you can only email.
Convert silence into evidence before you rely on it: a short, low-traffic removal window that makes a still-dependent consumer fail visibly and loudly while you are watching, rather than at three in the morning after you have moved on.
State the removal criterion as a measurement with a duration attached, such as observed reads at zero across a full billing cycle, and keep the change reversible for one release after removal.

Follow-up

How would you detect a consumer that reads the field only during a monthly export?
One caller refuses to move and has a commercial relationship behind it. What changes in your plan and what does not?
After removal, what makes the change irreversible, and how long before you cross that line?