G.D. Barri Software Engineer Interview Guide

The 60-second brief

At G.D. Barri, the Software Engineer role serves as a critical bridge between complex engineering requirements and operational excellence. Unlike traditional software roles focused solely on consumer applications, this position requires a deep appreciation for industrial, nuclear, and electrical infrastructure. Your work directly impacts the reliability and safety of high-stakes systems, ensuring that data-driven solutions align with rigid engineering standards. You will contribute to a multidisciplinary environment where technical precision is non-negotiable. Whether you are working on electrical design, procurement systems, or mechanical simulations, your role is to translate multifaceted engineering challenges into robust software solutions.

This guide is scoped to a Software Engineer candidate at G.D. Barri.

Focus areas

• Software Engineering (General)
• Engineering Domain Knowledge (Nuclear)
• Programming Languages

The G.D. Barri interview process

G.D. Barri candidates report 4 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Screening

Initial assessment of baseline technical competency and communication style.

What to demonstrate

• Initial assessment of baseline technical competency and communication style
• Depth in Software Engineering (General)

How to prepare

• Answer aloud and timed: How do you ensure your code complies with safety-critical engineering standards?
• Answer aloud and timed: Describe a time you had to troubleshoot a software issue that interfaced with hardware or physical systems.

Technical Discussions

In-depth technical discussions where candidates demonstrate knowledge through practical scenarios.

What to demonstrate

• In-depth technical discussions where candidates demonstrate knowledge through practical scenarios
• Depth in Software Engineering (General)

How to prepare

• Answer aloud and timed: How do you approach the documentation of complex logic in an industrial setting?
• Answer aloud and timed: Explain your process for verifying that software outputs align with real-world mechanical or electrical constraints.

Interaction with Leads

Candidates interact with technical leads and project stakeholders to reflect team-based work.

What to demonstrate

• Candidates interact with technical leads and project stakeholders to reflect team-based work
• Depth in Software Engineering (General)

How to prepare

• Answer aloud and timed: Walk me through your process for designing a system that must be both scalable and highly reliable.
• Answer aloud and timed: How do you handle conflicting requirements from different engineering teams?

Final Assessment

Final evaluation focusing on calmness under pressure and the ability to defend technical decisions.

What to demonstrate

• Final evaluation focusing on calmness under pressure and the ability to defend technical decisions
• Depth in Software Engineering (General)

How to prepare

• Answer aloud and timed: Describe a scenario where you identified a bottleneck in a system; what steps did you take to resolve it?
• Answer aloud and timed: How do you prioritize tasks when working under strict project deadlines?

Where candidates lose points

Contextualize your experience

When describing your past work, always highlight how your software contributions directly supported the broader engineering goals of your team.

Be ready for ambiguity

In industrial engineering, requirements can sometimes be fluid. Demonstrate that you can handle uncertainty by asking clarifying questions and documenting your assumptions.

Emphasize safety

Any experience you have with safety-critical software is a major asset—ensure this is highlighted during your technical interviews.

Do not overlook the importance of soft skills

Being able to communicate effectively with non-software engineers is a primary differentiator for successful candidates at G.D. Barri.

Questions & practice

Identify the heaviest tenants in a five-minute window under memory pressure

Medium · top-k · heavy hitters · streaming

The edge service handles about 3,000 requests per second across roughly 50,000 tenants, peaking near 9,000. Expose the 50 heaviest tenants by request count over the trailing five minutes so limits can be tightened before one tenant's backfill starves the fleet. You may not retain five minutes of raw records. Give the exact solution and its memory, then the bounded-memory approximation with its error stated as a formula, and say which you would ship and at what tenant cardinality that choice changes.

Approach

1. Do the exact version first, because it is affordable at this cardinality: a ring of 300 one-second counters per tenant, advanced lazily, is 1,200 bytes of counters per tenant and roughly 60 to 90 MB for 50,000 tenants with overhead. Carry a running total and subtract the bucket you overwrite so a window read is O(1) rather than 300 adds.
2. Extract the top 50 with a size-k min-heap over the tenant sums: O(d log k) for d tenants, against O(d log d) to sort them all. Maintaining the heap continuously instead of on query requires a tenant-to-heap-index map, because incrementing a count already inside the heap means sifting from a known position, and without that map you rebuild the heap on every request.
3. State the approximation precisely rather than gesturing at sketches. Misra-Gries with m counters retains every item whose true count exceeds N/(m+1), and each retained count underestimates the truth by at most N/(m+1). With m = 1,000 and N = 900,000 requests in the window the error is roughly 900 requests, which is fine for spotting a tenant sending 50,000 and useless for ranking two tenants 200 apart.
4. Say what breaks when the window slides: Misra-Gries and Space-Saving are insert-only and cannot be decremented as records age out. The workable construction is one summary per sub-window, say ten seconds, with 30 summaries merged at query time, and the merged error is the sum of the per-summary errors, so the bound degrades linearly in the number of sub-windows.

Follow-up

• The heaviest tenant is heavy because of one export job rather than user traffic. Should the limiter treat those as the same tenant?
• Two tenants sit tied at the boundary of the top 50. Does your answer flap, and does the flapping matter?

Merge partitioned event streams into one ordered feed with bounded lateness

Hard · k-way merge · watermarks · out-of-order streams

The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.

Approach

1. Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
2. Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
3. Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
4. Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.

Follow-up

• The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
• The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?

Find overlapping job attempts and peak concurrency from lease records

Medium · sweep line · intervals · leases

A day of job_run history yields about 50,000,000 attempt records: (job_run_id, job_type, attempt, started_at, finished_at which is NULL when the worker died, lease_expires_at). Leases expire on a clock, so a job that outran its lease ran twice. Produce (a) every job_run_id whose attempts overlapped in wall-clock time and (b) the peak number of simultaneously running attempts per job_type with the minute it occurred. Target O(n log n). State how you treat a NULL finished_at and what clock skew does to your answer.

Approach

1. Define the interval before sorting anything: an attempt occupies [started_at, COALESCE(finished_at, lease_expires_at)). finished_at is observed and lease_expires_at is only a promise, so every attempt without a finish contributes an estimate and the whole result is a lower bound on overlap rather than an exact count.
2. For peak concurrency, sweep: emit 2n endpoints, sort by (timestamp, kind) with ends ordered before starts at equal timestamps, then walk the sequence maintaining a counter per job_type and record each type's maximum with its timestamp. O(n log n) dominated by the sort, O(n) space, or O(1) extra if the sort is external and the walk streams.
3. For overlap detection, do not compare attempts pairwise. A single global sort by (job_run_id, started_at) gives both the grouping and the order; within a group, keep the maximum end seen so far and report an overlap exactly when the next start is less than that running maximum, which is one linear pass after the sort.
4. Half-open intervals matter and are easy to get wrong: with closed intervals an attempt ending at the same millisecond another begins reads as concurrency two, and across 50,000,000 records that artefact swamps the real signal.

Follow-up

• A handler is not idempotent and you have found 400 overlapping jobs. Which of them actually caused damage, and what would you query to find out?
• Peak concurrency for one job_type is 4 against a configured cap of 4. Is the cap working, or is the data hiding attempts that never started?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

1. One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
2. Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
3. State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
4. Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.

Follow-up

• A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
• Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?

Stop tag and share joins from fanning out a page

Medium · join fan-out · semi-joins · many-to-many

resource_tag is (resource_id, tag_id) with PK (resource_id, tag_id); resource_share is (resource_id, shared_with_user_id, permission). The tagged-and-shared listing inner-joins resource to both, filters tenant_id, tag_id = ANY($2) and shared_with_user_id = $3, orders by updated_at DESC and takes 50. Pages come back with fewer than 50 distinct resources and the total in the header is far too high. Explain the row multiplication, rewrite both the page query and the count query so each is correct, and name the index each one needs. PostgreSQL 16.

Approach

1. Do the arithmetic against the predicates that are actually there. An inner join emits one row per matching child row, and both joins are filtered: tag_id = ANY($2) admits only the requested tags, shared_with_user_id = $3 admits one user's share rows. So a resource holding three of the requested tags and shared with $3 once yields three rows, not one — the multiplier is its count of matching tags times its share rows for that single user, and that second factor is 1 unless the table admits duplicate (resource_id, shared_with_user_id) pairs. LIMIT 50 then limits rows rather than resources, and COUNT(*) counts pairs — the header is the product, not the population.
2. Reject DISTINCT as the fix. It deduplicates after the product has been built, so the planner must materialise and sort the fanned-out set before the LIMIT can apply, and it leaves any SUM or AVG in the same select list wrong.
3. Rewrite both filters as semi-joins, keeping resource as the only row source: AND EXISTS (SELECT 1 FROM resource_tag rt WHERE rt.resource_id = r.resource_id AND rt.tag_id = ANY($2)) and the same shape against resource_share. A semi-join stops at the first match per resource and preserves the driving index order, so ORDER BY updated_at DESC, resource_id DESC LIMIT 50 still stops after 50 rows.
4. Count with the same predicates and no join at all: SELECT count(*) FROM resource r WHERE r.tenant_id = $1 AND r.status = 'active' AND EXISTS (...) AND EXISTS (...). Nothing multiplies a resource, so the number is the population.

Follow-up

• The filter changes from 'any of these tags' to 'all of these tags'. Rewrite it and state what it costs relative to the ANY form.
• A resource can be shared with the same user twice under different permissions. Does your count change, and should it?

How do you ensure your code complies with safety-critical engineering standards?

Medium · Technical and Domain Knowledge

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How do you approach the documentation of complex logic in an industrial setting?

Medium · Technical and Domain Knowledge

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

Explain your process for verifying that software outputs align with real-world mechanical or electrical constr

Medium · Technical and Domain Knowledge

Explain your process for verifying that software outputs align with real-world mechanical or electrical constraints.

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

Walk me through your process for designing a system that must be both scalable and highly reliable.

Medium · Problem-Solving and Methodology

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

Describe a scenario where you identified a bottleneck in a system; what steps did you take to resolve it?

Medium · Problem-Solving and Methodology

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

How do you prioritize tasks when working under strict project deadlines?

Medium · Problem-Solving and Methodology

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

Read latency spikes on a sixty-second sawtooth

Medium · cache stampede · single-flight · ttl

The cached listing read path serves about 14k reads/second at an 85% hit rate. p99 sits at 35 ms for 57 seconds, jumps to 900 ms for 3, and repeats. During each spike the primary shows several hundred identical listing queries starting within the same millisecond, all carrying one large tenant's id. Cache entries use a 60-second TTL. Give the mechanism, the ordered checks, the fix, and the correctness hazard your fix must not introduce.

Approach

1. Match the period to a configured number before theorising about load. A spike every 60 seconds against a 60-second TTL is an entry expiring, and you confirm it by correlating spike timestamps with the entry's write time rather than with the traffic curve. If the period had matched a cron or a GC interval instead, this is a different investigation.
2. Establish the concurrency of the miss. Several hundred identical queries in one millisecond means the miss path has no coalescing: every request that arrives between expiry and repopulation recomputes. The herd size is that key's arrival rate times its recompute time, so at 1.2k reads/second for the hot key and a 250 ms recompute you expect about 300 concurrent misses, which matches what is observed.
3. Add single-flight on the miss path so one caller per key recomputes under a short-lived lock while the rest wait for its result. Prefer stale-while-revalidate where the read tolerates it: return the expired value immediately and refresh asynchronously, which removes the latency spike rather than serialising it into a queue of waiters.
4. De-synchronise the keys. Write TTLs with jitter, for example 60 seconds plus or minus 10%, so a deploy or a mass invalidation does not align every key on the same second and turn a per-key herd into a fleet-wide one.

Follow-up

• The same sawtooth appears on a key that is invalidated on write rather than expired. Is that the same bug?
• How does your answer change if the recompute takes 4 seconds instead of 250 ms?

Suggested practice checklist

Built from the rounds and topics G.D. Barri candidates report.

Day 1 — Map the G.D. Barri loop

• Write out the reported sequence: Screening, Technical Discussions, Interaction with Leads, Final Assessment.
• For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 4 reported rounds, with the weakest marked.

Day 2 — Work Software Engineering (General)

• Spend the session on Software Engineering (General), which G.D. Barri candidates report being tested on.
• Write one worked example in Software Engineering (General) and time yourself on it.

Deliverable: One timed worked example in Software Engineering (General).

Day 3 — Work Engineering Domain Knowledge (Nuclear)

• Spend the session on Engineering Domain Knowledge (Nuclear), which G.D. Barri candidates report being tested on.
• Write one worked example in Engineering Domain Knowledge (Nuclear) and time yourself on it.

Deliverable: One timed worked example in Engineering Domain Knowledge (Nuclear).

Day 4 — Work Programming Languages

• Spend the session on Programming Languages, which G.D. Barri candidates report being tested on.
• Write one worked example in Programming Languages and time yourself on it.

Deliverable: One timed worked example in Programming Languages.

Day 5 — Answer out loud: Technical and Domain Knowledge

• Answer aloud, timed: How do you ensure your code complies with safety-critical engineering standards?
• Answer aloud, timed: Describe a time you had to troubleshoot a software issue that interfaced with hardware or physical systems.

Deliverable: Spoken answers to 2 reported Technical and Domain Knowledge question(s), under time.

Day 6 — Answer out loud: Problem-Solving and Methodology

• Answer aloud, timed: Walk me through your process for designing a system that must be both scalable and highly reliable.
• Answer aloud, timed: How do you handle conflicting requirements from different engineering teams?

Deliverable: Spoken answers to 2 reported Problem-Solving and Methodology question(s), under time.

Day 7 — Answer out loud: Behavioral and Leadership

• Answer aloud, timed: Give an example of a time you had to explain a complex technical issue to a non-technical stakeholder.
• Answer aloud, timed: How do you handle disagreements regarding technical direction with your peers?

Deliverable: Spoken answers to 2 reported Behavioral and Leadership question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Describe a time you had to troubleshoot a software issue that interfaced with hardware or physical systems.

Medium · Technical and Domain Knowledge

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

How do you handle conflicting requirements from different engineering teams?

Medium · Problem-Solving and Methodology

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Give an example of a time you had to explain a complex technical issue to a non-technical stakeholder.

Medium · Behavioral and Leadership

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

How do you handle disagreements regarding technical direction with your peers?

Medium · Behavioral and Leadership

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Tell me about a time you took ownership of a project that was failing or stalled.

Medium · Behavioral and Leadership

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?