Interview guides · Freecharge

Freecharge Software Engineer Interview Guide

Freecharge Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

As a Software Engineer at Freecharge, you are at the core of India’s digital financial ecosystem. Your primary responsibility involves building and maintaining robust, scalable backend services that power millions of transactions daily. You will work on high-impact projects that bridge the gap between complex financial systems and user-friendly mobile interfaces, ensuring that every payment, recharge, and bill settlement is seamless and secure. This role requires a deep technical curiosity and a commitment to engineering excellence. You will contribute to the architecture of distributed systems, optimize database performance, and implement secure APIs that handle sensitive user data. Because Freecharge operates in a fast-paced fintech environment, you will often find yourself balancing the need for rapid feature delivery with the absolute necessity of system reliability and performance.

This guide is scoped to a Software Engineer candidate at Freecharge.

Focus areas

Data Structures & Algorithms (DSA)
SQL
Problem Solving (Coding)

The Freecharge interview process

Freecharge candidates report 2 rounds over 2-4 weeks. The stages below are what candidates describe, not a published process.

Online Assessment

Initial assessment including an aptitude test and coding challenge to evaluate foundational skills.

What to demonstrate

Initial assessment including an aptitude test and coding challenge to evaluate foundational skills
Depth in Data Structures & Algorithms (DSA)

How to prepare

Answer aloud and timed: Explain the concept of Encapsulation and why it is critical for security.
Answer aloud and timed: How do you implement Polymorphism in a real-world project?

Technical Interviews

Series of interviews focusing on past projects, live coding, and architectural discussions.

What to demonstrate

Series of interviews focusing on past projects, live coding, and architectural discussions
Depth in Data Structures & Algorithms (DSA)

How to prepare

Answer aloud and timed: What are the differences between Abstract classes and Interfaces in Java?
Answer aloud and timed: Explain the life cycle of a thread in Multithreading.

Where candidates lose points

Own your resume

Every line on your resume is fair game. If you mention a technology, be prepared to answer deep-dive questions about it.

Focus on SQL

Since this is a fintech company, data handling is critical. Ensure your understanding of joins, indexing, and query optimization is rock-solid.

Practice communication

When solving coding problems, talk through your thought process out loud. Interviewers care as much about your logic as your final code.

Prepare for behavioral questions

Be ready to discuss your past work experiences, including how you handle pressure and team dynamics.

Questions & practice

Explain the life cycle of a thread in Multithreading.

Medium · Core Java & Object-Oriented Programming

Approach

Say what the runtime actually does before reasoning about the code.
Name what is shared across threads and what owns each piece of state.
Identify the window where an invariant is briefly untrue.
Distinguish a value from a reference to it, and say which one you handed out.

Follow-up

What happens if two callers reach this at the same time?
Where could this allocate more than you expect?

Canonicalise a request body into a stable idempotency fingerprint

Medium · parsing · canonicalisation · hashing

idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.

Approach

Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.

Follow-up

A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
Where does the fingerprint get computed relative to request decompression and the body-size limit?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

How do you approach Performance Tuning for complex SQL queries?

Medium · Database Management & SQL

Approach

Name the grain you start from and join outward from it.
Check whether any join is one-to-many before aggregating, or the sums inflate.
Say which index the query would use, and what makes it unusable.
Handle the rows that do not match: that is usually the actual question.

Follow-up

How does the query change if that join becomes one-to-many?
What happens to this when the table is ten times larger?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.

Follow-up

A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?

Explain the concept of Encapsulation and why it is critical for security.

Medium · Core Java & Object-Oriented Programming

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

How do you implement Polymorphism in a real-world project?

Medium · Core Java & Object-Oriented Programming

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

What are the differences between Abstract classes and Interfaces in Java?

Medium · Core Java & Object-Oriented Programming

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Explain the difference between JOINs and when to use them.

Medium · Database Management & SQL

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

What are Materialized Views, and how do they impact performance?

Medium · Database Management & SQL

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Describe the ACID properties in the context of database transactions.

Medium · Database Management & SQL

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

How do you optimize indexing to speed up read-heavy operations?

Medium · Database Management & SQL

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?