cswork / libraryOpen practice workspace

Interview guides · Fluid Water Group

Fluid Water Group Software Engineer Interview Guide

Fluid Water Group Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

As a Software Engineer at Fluid Water Group, you will be at the intersection of critical infrastructure and modern technology. This role is fundamental to the company’s mission of solving complex water challenges through innovative, technology-driven solutions. You will be tasked with developing, maintaining, and scaling software systems that support everything from mechanical component design to large-scale data management and operational efficiency. The impact of this position is tangible; your work directly influences how Fluid Water Group delivers value to its clients and optimizes its internal processes. You will collaborate with cross-functional teams, including electrical, mechanical, and R&D engineers, to bridge the gap between hardware and software.

This guide is scoped to a Software Engineer candidate at Fluid Water Group.

Focus areas

  • Fundamentals (deep subject understanding)
  • BJT vs MOSFET
  • SQL (NULL handling)

The Fluid Water Group interview process

Fluid Water Group candidates report 3 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Phone Screening

Initial phone screening with a recruiter to assess candidate fit.

What to demonstrate

  • Initial phone screening with a recruiter to assess candidate fit
  • Depth in Fundamentals (deep subject understanding)

How to prepare

  • Be able to walk your CV end to end in two minutes, and say why this company specifically.
  • Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Interviews

One or more technical interviews with engineering managers or team leads.

What to demonstrate

  • One or more technical interviews with engineering managers or team leads
  • Depth in Fundamentals (deep subject understanding)

How to prepare

  • Answer aloud and timed: Describe a past experience where you addressed a challenge in solving a problem.
  • Answer aloud and timed: What frustrates you in the workspace?

Panel Interview

Final in-person or virtual panel interview with R&D directors or department heads.

What to demonstrate

  • Final in-person or virtual panel interview with R&D directors or department heads
  • Depth in Fundamentals (deep subject understanding)

How to prepare

  • Answer aloud and timed: Describe any project you have failed at?
  • Answer aloud and timed: Can you explain the difference between a BJT and a MOSFET?

Where candidates lose points

Prepare for the "Why

Don't just focus on the "how" of your technical work; be ready to explain why you chose a specific technology or methodology over another.

Know your resume inside out

Expect deep dives into any project listed on your resume; be prepared to discuss specific challenges and your individual contribution to the outcomes.

Practice your communication

Since you will be working with non-software teams, practice explaining technical decisions in a way that is accessible to a non-technical audience.

Ask meaningful questions

At the end of your interviews, ask about the team’s current technical challenges or how the engineering team is evolving. This shows genuine interest in the business.

Questions & practice

What is the idea of Scrum team handling, and what are the advantages and disadvantages?

Medium · Role-Specific and Problem Solving

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

How do you use an oscilloscope to find 3db gain?

Medium · Role-Specific and Problem Solving

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

What is your exposure to ECN/ECR processes and wind-chill?

Medium · Role-Specific and Problem Solving

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Denormalise tenant onto revisions and backfill it live

Hard · denormalisation · online migration · backfill

resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.

Approach

  1. Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
  2. Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
  3. Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
  4. Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.

Follow-up

  • The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
  • How do you verify the backfill actually finished, given rows are still being inserted while it runs?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

  1. One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
  2. Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
  3. State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
  4. Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.

Follow-up

  • A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
  • Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?

Can you explain the difference between a BJT and a MOSFET?

Medium · Technical Fundamentals

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

What are the differences between an abstract class and an interface?

Medium · Technical Fundamentals

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

Describe what is required to make a power supply design.

Medium · Technical Fundamentals

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

One log partition stops advancing while the others drain

Easy · poison message · head-of-line blocking · consumer lag

Search results for a subset of tenants are hours stale; the rest are current. The projection consumer reports lag of zero on 15 of 16 partitions and 400,000 on one. Its error rate is flat and its CPU is idle. outbox_event has no pending rows older than a second, so the relay has published everything it holds. Identify the mechanism, give the ordered checks, and state what you do in the first ten minutes versus what you change permanently.

Approach

  1. Read the lag distribution first. A slow consumer lags everywhere; zero on fifteen partitions and 400,000 on one is not throughput. Idle CPU on the stuck partition means the consumer is not advancing its offset at all, which points at one message it cannot get past rather than at a rate problem.
  2. Exonerate the producer before touching the consumer. No pending outbox rows older than a second means the relay published, so the event exists in the log. This separates never sent from sent and never applied, which are different code paths and usually different owners.
  3. Read the message at the stuck offset and the handler's log lines for its event_id. A flat error rate with no progress has two explanations and you must distinguish them: the handler is throwing and the retry loop is swallowing it, or the handler is blocking on something and never returning. Idle CPU with no error lines favours the second.
  4. Mitigate before diagnosing further. Move the offending event to a dead-letter store and commit the offset past it. Adding consumers does nothing here, because a partition is consumed by exactly one member of the group, and the blast radius is every aggregate hashed to that partition, not only the aggregate that produced the bad event.

Follow-up

  • The dead-lettered event carried aggregate_version 7 and the projection had applied 6. What must the replay do differently if 8 and 9 landed in the meantime?
  • How do you show staleness to the user while the partition is behind, given the API already returns the projection's watermark?

Suggested practice checklist

Built from the rounds and topics Fluid Water Group candidates report.

Day 1 — Map the Fluid Water Group loop

  • Write out the reported sequence: Phone Screening, Technical Interviews, Panel Interview.
  • For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 3 reported rounds, with the weakest marked.

Day 2 — Work Fundamentals (deep subject understanding)

  • Spend the session on Fundamentals (deep subject understanding), which Fluid Water Group candidates report being tested on.
  • Write one worked example in Fundamentals (deep subject understanding) and time yourself on it.

Deliverable: One timed worked example in Fundamentals (deep subject understanding).

Day 3 — Work BJT vs MOSFET

  • Spend the session on BJT vs MOSFET, which Fluid Water Group candidates report being tested on.
  • Write one worked example in BJT vs MOSFET and time yourself on it.

Deliverable: One timed worked example in BJT vs MOSFET.

Day 4 — Work SQL (NULL handling)

  • Spend the session on SQL (NULL handling), which Fluid Water Group candidates report being tested on.
  • Write one worked example in SQL (NULL handling) and time yourself on it.

Deliverable: One timed worked example in SQL (NULL handling).

Day 5 — Answer out loud: Behavioral and Leadership

  • Answer aloud, timed: Tell me about yourself and why you want to work here.
  • Answer aloud, timed: How do you handle having tasks from multiple project managers all asking you to prioritize their request?

Deliverable: Spoken answers to 2 reported Behavioral and Leadership question(s), under time.

Day 6 — Answer out loud: Technical Fundamentals

  • Answer aloud, timed: Can you explain the difference between a BJT and a MOSFET?
  • Answer aloud, timed: What are the differences between an abstract class and an interface?

Deliverable: Spoken answers to 2 reported Technical Fundamentals question(s), under time.

Day 7 — Answer out loud: Role-Specific and Problem Solving

  • Answer aloud, timed: Can you walk me through your experience with 3D modeling and CAD software?
  • Answer aloud, timed: What is the idea of Scrum team handling, and what are the advantages and disadvantages?

Deliverable: Spoken answers to 2 reported Role-Specific and Problem Solving question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Tell me about yourself and why you want to work here.

Medium · Behavioral and Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you handle having tasks from multiple project managers all asking you to prioritize their request?

Medium · Behavioral and Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Describe a past experience where you addressed a challenge in solving a problem.

Medium · Behavioral and Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

What frustrates you in the workspace?

Medium · Behavioral and Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Describe any project you have failed at?

Medium · Behavioral and Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you handle NULL values in SQL Server?

Medium · Technical Fundamentals

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

What is your experience with database management software?

Medium · Technical Fundamentals

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Can you walk me through your experience with 3D modeling and CAD software?

Medium · Role-Specific and Problem Solving

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?