cswork / libraryOpen practice workspace

Interview guides · FERCHAU

FERCHAU Software Engineer Interview Guide

FERCHAU Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

As a Software Engineer at FERCHAU, you are at the intersection of high-stakes engineering and complex problem-solving. FERCHAU operates as a premier partner for the aerospace, defence, and automotive industries, meaning your work directly contributes to mission-critical systems. Whether you are working on helicopter flight systems, UAV development, or complex aviation requirements, your role is to ensure technological excellence in environments where precision is non-negotiable. This role is not just about writing code; it is about engineering robust, reliable, and compliant solutions that meet the rigorous standards of the aerospace and defence sectors. You will collaborate with interdisciplinary teams to translate high-level system requirements into functional software architectures.

This guide is scoped to a Software Engineer candidate at FERCHAU.

Focus areas

  • Systems Engineering
  • Requirement Engineering
  • Verification & Validation (V&V)

The FERCHAU interview process

FERCHAU candidates report 2 rounds over 2-4 weeks. The stages below are what candidates describe, not a published process.

Technical Screening

Initial assessment of foundational knowledge to gauge technical capabilities.

What to demonstrate

  • Initial assessment of foundational knowledge to gauge technical capabilities
  • Depth in Systems Engineering

How to prepare

  • Answer aloud and timed: Explain your experience with the V-model in software development.
  • Answer aloud and timed: How do you ensure your code meets strict safety and compliance standards?

Deep-Dive Interviews

Focused discussions on domain expertise and cultural alignment with the team.

What to demonstrate

  • Focused discussions on domain expertise and cultural alignment with the team
  • Depth in Systems Engineering

How to prepare

  • Answer aloud and timed: Describe a time you had to troubleshoot a complex integration issue between hardware and software.
  • Answer aloud and timed: What experience do you have with model-based systems engineering (MBSE)?

Where candidates lose points

Understand the industry

Research current trends in aerospace and defence. Showing that you understand the challenges of these industries will set you apart.

Master your resume

Be prepared to explain every project listed on your resume in detail, including the technologies used and the specific results achieved.

Ask informed questions

Prepare questions about the team's current projects, the engineering culture, and how they handle technical debt.

Questions & practice

How do you prioritize requirements when working on a high-complexity project?

Medium · Technical and Domain Knowledge

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Identify the heaviest tenants in a five-minute window under memory pressure

Medium · top-k · heavy hitters · streaming

The edge service handles about 3,000 requests per second across roughly 50,000 tenants, peaking near 9,000. Expose the 50 heaviest tenants by request count over the trailing five minutes so limits can be tightened before one tenant's backfill starves the fleet. You may not retain five minutes of raw records. Give the exact solution and its memory, then the bounded-memory approximation with its error stated as a formula, and say which you would ship and at what tenant cardinality that choice changes.

Approach

  1. Do the exact version first, because it is affordable at this cardinality: a ring of 300 one-second counters per tenant, advanced lazily, is 1,200 bytes of counters per tenant and roughly 60 to 90 MB for 50,000 tenants with overhead. Carry a running total and subtract the bucket you overwrite so a window read is O(1) rather than 300 adds.
  2. Extract the top 50 with a size-k min-heap over the tenant sums: O(d log k) for d tenants, against O(d log d) to sort them all. Maintaining the heap continuously instead of on query requires a tenant-to-heap-index map, because incrementing a count already inside the heap means sifting from a known position, and without that map you rebuild the heap on every request.
  3. State the approximation precisely rather than gesturing at sketches. Misra-Gries with m counters retains every item whose true count exceeds N/(m+1), and each retained count underestimates the truth by at most N/(m+1). With m = 1,000 and N = 900,000 requests in the window the error is roughly 900 requests, which is fine for spotting a tenant sending 50,000 and useless for ranking two tenants 200 apart.
  4. Say what breaks when the window slides: Misra-Gries and Space-Saving are insert-only and cannot be decremented as records age out. The workable construction is one summary per sub-window, say ten seconds, with 30 summaries merged at query time, and the merged error is the sum of the per-summary errors, so the bound degrades linearly in the number of sub-windows.

Follow-up

  • The heaviest tenant is heavy because of one export job rather than user traffic. Should the limiter treat those as the same tenant?
  • Two tenants sit tied at the boundary of the top 50. Does your answer flap, and does the flapping matter?

Archive a resource graph without breaking live references or recursing

Medium · graph traversal · topological order · tenant isolation

Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.

Approach

  1. Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
  2. Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
  3. Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
  4. Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.

Follow-up

  • The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
  • The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?

Replace offset paging on the resource feed with keyset

Easy · keyset pagination · composite index · sort order

resource holds resource_id, tenant_id, owner_user_id, title, body_ref, version, status ('draft','active','archived','deleted'), created_at, updated_at, deleted_at, with an index on (tenant_id, status, updated_at DESC, resource_id DESC). The listing endpoint returns active resources for one tenant, newest update first, 50 per page, today with LIMIT 50 OFFSET n. Tenants reach page 400 and rows are created while they read. Write the keyset query, define what the cursor carries and how it is encoded, and say which part of the index each predicate uses. Assume PostgreSQL 16.

Approach

  1. Name the two failures separately. OFFSET 20000 makes the server produce and discard 20,000 rows, so page cost grows with depth rather than with page size. Independently, any write that changes how many rows sort above the offset moves the window between two fetches, and the direction decides which anomaly you get: an insert lands at the head of updated_at DESC and pushes already-returned rows down past the boundary, so they are returned a second time; a delete above the offset, or a row whose updated_at is bumped above the cursor, pulls rows up and one is never returned at all. Nothing in the response reveals either.
  2. Write the seek: WHERE tenant_id = $1 AND status = 'active' AND (updated_at, resource_id) < ($2, $3) ORDER BY updated_at DESC, resource_id DESC LIMIT 50. The row-value comparison is one index range rather than a disjunction, and both columns are NOT NULL, which is what makes that comparison well defined.
  3. Map each predicate onto the index: tenant_id and status are equality on the leading columns, (updated_at, resource_id) is the range, and the ORDER BY matches the index order so no Sort node appears and the scan stops after 50 rows. The DESC in the definition only matters for mixed directions — a plain ascending btree on the same columns is read backwards for this query.
  4. Put both sort columns in the cursor and nothing the client can tamper with into another tenant: base64 of (updated_at, resource_id), validated server-side, with tenant_id taken from the principal.

Follow-up

  • The client asks for 'jump to page 400'. What do you offer instead, and what does the honest version cost?
  • Sort order becomes user-selectable across four columns. How many indexes is that, and which would you refuse to add?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

  1. Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
  2. Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
  3. Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
  4. State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.

Follow-up

  • A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
  • The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?

How do you ensure your code meets strict safety and compliance standards?

Medium · Technical and Domain Knowledge

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

What experience do you have with model-based systems engineering (MBSE)?

Medium · Technical and Domain Knowledge

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

p99 jumped on one listing filter while p50 stayed flat

Medium · query planning · composite index · percentiles

After a release that added an owner_user_id filter to the resource listing, p99 rose from 90 ms to 1.9 s while p50 stayed at 40 ms. Traffic and row counts are unchanged. resource carries the index (tenant_id, status, updated_at DESC, resource_id DESC). The new query filters tenant_id and owner_user_id, orders by updated_at DESC, resource_id DESC, and takes 20 rows. On PostgreSQL, explain the shape of the regression, prove it from a query plan, and give the index you would add.

Approach

  1. Start from the shape. A flat p50 with a moved p99 means a subset of requests changed cost, not all of them, so the first job is naming the subset. Bucket the endpoint's latency by the tenant's row count; the natural hypothesis is that large tenants are a small share of requests and all of the tail.
  2. Get the plan for the new query on a large tenant with EXPLAIN (ANALYZE, BUFFERS). Expect an index scan over the tenant's range, a filter discarding most of it, then a Sort feeding the Limit, possibly reporting Sort Method: external merge Disk. Read actual rows on the scan node, not estimated.
  3. Explain why the existing index cannot serve it. A composite B-tree is seekable only as a left prefix, and with no equality predicate on status the scan cannot treat updated_at as an ordering, because rows in the tenant's range are ordered by status first. Everything matching must be read and sorted before LIMIT 20 can apply, so a tenant with 400,000 rows pays 400,000 rows to return 20.
  4. Add (tenant_id, owner_user_id, updated_at DESC, resource_id DESC). Equality on the first two columns leaves the index ordered by updated_at within that pair, so the plan becomes an index scan that stops after 20 rows with no Sort node. PostgreSQL can scan a B-tree backwards, so the DESC markers matter only if the two sort columns ever disagree in direction; keeping them explicit documents the order the keyset cursor depends on.

Follow-up

  • The endpoint paginates with OFFSET. What does page 500 cost with your index, and what does the keyset version cost?
  • How would you have caught this before release, given that a 10,000-row seed database produces the same plan shape at an unnoticeable cost?

Suggested practice checklist

Built from the rounds and topics FERCHAU candidates report.

Day 1 — Map the FERCHAU loop

  • Write out the reported sequence: Technical Screening, Deep-Dive Interviews.
  • For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 2 reported rounds, with the weakest marked.

Day 2 — Work Systems Engineering

  • Spend the session on Systems Engineering, which FERCHAU candidates report being tested on.
  • Write one worked example in Systems Engineering and time yourself on it.

Deliverable: One timed worked example in Systems Engineering.

Day 3 — Work Requirement Engineering

  • Spend the session on Requirement Engineering, which FERCHAU candidates report being tested on.
  • Write one worked example in Requirement Engineering and time yourself on it.

Deliverable: One timed worked example in Requirement Engineering.

Day 4 — Work Verification & Validation (V&V)

  • Spend the session on Verification & Validation (V&V), which FERCHAU candidates report being tested on.
  • Write one worked example in Verification & Validation (V&V) and time yourself on it.

Deliverable: One timed worked example in Verification & Validation (V&V).

Day 5 — Answer out loud: Technical and Domain Knowledge

  • Answer aloud, timed: Explain your experience with the V-model in software development.
  • Answer aloud, timed: How do you ensure your code meets strict safety and compliance standards?

Deliverable: Spoken answers to 2 reported Technical and Domain Knowledge question(s), under time.

Day 6 — Answer out loud: Behavioral and Collaborative Skills

  • Answer aloud, timed: Tell me about a time you had to explain a complex technical issue to a non-technical stakeholder.
  • Answer aloud, timed: How do you handle tight deadlines when working on safety-critical components?

Deliverable: Spoken answers to 2 reported Behavioral and Collaborative Skills question(s), under time.

Day 7 — Dry run for FERCHAU

  • Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Explain your experience with the V-model in software development.

Medium · Technical and Domain Knowledge

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Describe a time you had to troubleshoot a complex integration issue between hardware and software.

Medium · Technical and Domain Knowledge

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Tell me about a time you had to explain a complex technical issue to a non-technical stakeholder.

Medium · Behavioral and Collaborative Skills

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you handle tight deadlines when working on safety-critical components?

Medium · Behavioral and Collaborative Skills

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Describe a situation where you had to adapt to a major change in project requirements.

Medium · Behavioral and Collaborative Skills

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you ensure effective communication when working in a cross-functional project team?

Medium · Behavioral and Collaborative Skills

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?