Interview guides · Excelsior University

Excelsior University Software Engineer Interview Guide

Excelsior University Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

As a Software Engineer at Excelsior University, you play a pivotal role in maintaining the digital infrastructure that empowers non-traditional learners to achieve their academic goals. Whether you are working as an Applications Developer, a Report Developer, or within the Infrastructure team, your work directly supports the university’s mission of accessibility and student success. You are not just writing code; you are building the systems that allow students to navigate their educational journey seamlessly. This role requires a blend of technical precision and mission-driven thinking. You will be tasked with solving complex problems that range from optimizing data reporting for administrative decision-making to ensuring the high availability of critical student-facing applications.

This guide is scoped to a Software Engineer candidate at Excelsior University.

Focus areas

Application Development
Report Development
Reporting / Analytics

The Excelsior University interview process

Excelsior University candidates report 3 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

Begin with a screening to gauge your background and interest in Excelsior University.

What to demonstrate

Begin with a screening to gauge your background and interest in Excelsior University
Depth in Application Development

How to prepare

Be able to walk your CV end to end in two minutes, and say why this company specifically.
Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Discussions

Engage in technical discussions to assess your skills and problem-solving abilities.

What to demonstrate

Engage in technical discussions to assess your skills and problem-solving abilities
Depth in Application Development

How to prepare

Answer aloud and timed: What is your preferred methodology for ensuring code quality and maintainability?
Answer aloud and timed: Explain the difference between [Technology A] and [Technology B] and when you would choose one over the other.

Behavioral Interviews

Participate in behavioral interviews with peers and leadership to evaluate your potential impact.

What to demonstrate

Participate in behavioral interviews with peers and leadership to evaluate your potential impact
Depth in Application Development

How to prepare

Prepare three examples from your own work, each with a decision you made and an outcome you can quantify.
Re-read the description of the behavioral interviews above and write down what you would ask to confirm before it.

Where candidates lose points

Focus on the "Why

When discussing past projects, explain why you chose specific technologies and the impact those choices had on the end-user.

Prepare Behavioral Stories

Use the STAR method (Situation, Task, Action, Result) to structure your answers to behavioral questions, ensuring they are concise and impactful.

Research the Mission

Familiarize yourself with Excelsior University's history and its focus on adult learners; mentioning this in your interview shows genuine interest.

Ask Insightful Questions

Prepare questions about the team’s current challenges or the university’s future technical roadmap to demonstrate your strategic thinking.

Questions & practice

Merge partitioned event streams into one ordered feed with bounded lateness

Hard · k-way merge · watermarks · out-of-order streams

The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.

Approach

Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.

Follow-up

The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?

Find overlapping job attempts and peak concurrency from lease records

Medium · sweep line · intervals · leases

A day of job_run history yields about 50,000,000 attempt records: (job_run_id, job_type, attempt, started_at, finished_at which is NULL when the worker died, lease_expires_at). Leases expire on a clock, so a job that outran its lease ran twice. Produce (a) every job_run_id whose attempts overlapped in wall-clock time and (b) the peak number of simultaneously running attempts per job_type with the minute it occurred. Target O(n log n). State how you treat a NULL finished_at and what clock skew does to your answer.

Approach

Define the interval before sorting anything: an attempt occupies [started_at, COALESCE(finished_at, lease_expires_at)). finished_at is observed and lease_expires_at is only a promise, so every attempt without a finish contributes an estimate and the whole result is a lower bound on overlap rather than an exact count.
For peak concurrency, sweep: emit 2n endpoints, sort by (timestamp, kind) with ends ordered before starts at equal timestamps, then walk the sequence maintaining a counter per job_type and record each type's maximum with its timestamp. O(n log n) dominated by the sort, O(n) space, or O(1) extra if the sort is external and the walk streams.
For overlap detection, do not compare attempts pairwise. A single global sort by (job_run_id, started_at) gives both the grouping and the order; within a group, keep the maximum end seen so far and report an overlap exactly when the next start is less than that running maximum, which is one linear pass after the sort.
Half-open intervals matter and are easy to get wrong: with closed intervals an attempt ending at the same millisecond another begins reads as concurrency two, and across 50,000,000 records that artefact swamps the real signal.

Follow-up

A handler is not idempotent and you have found 400 overlapping jobs. Which of them actually caused damage, and what would you query to find out?
Peak concurrency for one job_type is 4 against a configured cap of 4. Is the cap working, or is the data hiding attempts that never started?

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.

Follow-up

The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?

How do you approach optimizing a slow-performing database query or report?

Medium · Technical and Domain Proficiency

Approach

Name the grain you start from and join outward from it.
Check whether any join is one-to-many before aggregating, or the sums inflate.
Say which index the query would use, and what makes it unusable.
Handle the rows that do not match: that is usually the actual question.

Follow-up

How does the query change if that join becomes one-to-many?
What happens to this when the table is ten times larger?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.

Follow-up

A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?

What is your preferred methodology for ensuring code quality and maintainability?

Medium · Technical and Domain Proficiency

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Explain the difference between [Technology A] and [Technology B] and when you would choose one over the other.

Medium · Technical and Domain Proficiency

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Describe a time you had to troubleshoot a critical production issue. What was your process?

Medium · Technical and Domain Proficiency

Approach

Establish what changed and when, before forming any theory.
Pick a bisection that eliminates candidates whichever way it turns out.
Check the instrumentation before believing the symptom.
Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

What would you look at first, and what would it rule out?
How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the rounds and topics Excelsior University candidates report.

Day 1 — Map the Excelsior University loop

Write out the reported sequence: Initial Screening, Technical Discussions, Behavioral Interviews.
For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 3 reported rounds, with the weakest marked.

Day 2 — Work Application Development

Spend the session on Application Development, which Excelsior University candidates report being tested on.
Write one worked example in Application Development and time yourself on it.

Deliverable: One timed worked example in Application Development.

Day 3 — Work Report Development

Spend the session on Report Development, which Excelsior University candidates report being tested on.
Write one worked example in Report Development and time yourself on it.

Deliverable: One timed worked example in Report Development.

Day 4 — Work Reporting / Analytics

Spend the session on Reporting / Analytics, which Excelsior University candidates report being tested on.
Write one worked example in Reporting / Analytics and time yourself on it.

Deliverable: One timed worked example in Reporting / Analytics.

Day 5 — Answer out loud: Technical and Domain Proficiency

Answer aloud, timed: Describe a time you had to troubleshoot a critical production issue. What was your process?
Answer aloud, timed: How do you approach optimizing a slow-performing database query or report?

Deliverable: Spoken answers to 2 reported Technical and Domain Proficiency question(s), under time.

Day 6 — Answer out loud: Behavioral and Cultural Alignment

Answer aloud, timed: Why are you interested in working for an institution like Excelsior University?
Answer aloud, timed: Tell me about a time you had to explain a complex technical concept to a non-technical stakeholder.

Deliverable: Spoken answers to 2 reported Behavioral and Cultural Alignment question(s), under time.

Day 7 — Dry run for Excelsior University

Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

How do you handle security considerations when developing student-facing applications?

Medium · Technical and Domain Proficiency

Approach

Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?