Interview guides · Entegee

Entegee Software Engineer Interview Questions & Guide 2026

Entegee software engineer prep on partial failure: a timed-out request has an unknown outcome, not a failed one.

The 60-second brief

A Software Engineer at Entegee plays a pivotal role in bridging high-level technical requirements with robust, mission-critical execution. Because Entegee operates across diverse, high-stakes industries—ranging from aerospace and medical devices to complex manufacturing and telecommunications—the work of a Software Engineer is rarely one-dimensional. You are not just writing code; you are building the underlying infrastructure and verification systems that ensure safety, precision, and performance in environments where failure is not an option.

Most rounds test how you handle an under-specified problem more than what you recall. A wrong first approach you correct out loud is recoverable; a constraint you assumed silently and were never given is the expensive mistake.

Focus areas

Make every write idempotent under client retries
Scope every query and cache key by tenant
Evolve APIs without breaking pinned SDK clients

Overview

The impact of this role is significant. Whether you are developing GUI interfaces for defense systems or ensuring compliance in medical manufacturing, your contributions directly influence the reliability of products that end-users depend on daily. You will work in environments that demand technical rigor, such as C++ and C# development within both Windows and Linux ecosystems. This role is ideal for engineers who thrive on complexity, enjoy the intersection of hardware and software, and possess the discipline to work within strict regulatory or performance frameworks.

The Entegee interview process

Entegee candidates report 3 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

The person on this call usually cannot evaluate your code and does not need to. They write a short paragraph, and that paragraph is what a hiring manager skims when deciding who to put on your loop. So the test is not whether your work was hard, it is whether a non-engineer can repeat it correctly. Name systems by what they did rather than by their internal codename, give each project a shape (what was breaking, what you changed, what happened after), and keep the whole walkthrough near ninety seconds. Depth that cannot survive a paraphrase reads as vagueness.

What to demonstrate

Whether a non-engineer can restate your projects without distorting them, since their paraphrase is what travels to the hiring manager, not your sentences
Whether each project has a shape rather than a stack list: the failure or constraint, the change you made, the result and how it was measured
Whether you can say what was yours inside a team project without either inflating it or disappearing into the plural

How to prepare

Rewrite each headline project as two sentences with no internal system names and no acronyms outside your company, then say them to someone outside engineering and have them repeat them back. Fix whatever came back wrong
Attach one measured number to each project: the baseline, the change, and the window it was measured over. Where nothing was ever measured, say that plainly rather than reaching for a plausible percentage
Time the background walkthrough against a clock. If it runs past two minutes, compress the earliest role to a single clause and spend the recovered time on the most recent one

Technical Evaluation

What this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.

What to demonstrate

Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly

How to prepare

Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live

Final Discussion

Nobody in the room with you decides this. Interviewers typically write their rounds up separately, often before seeing anyone else's, and the outcome is settled later from those write-ups. A split panel gets resolved by whichever note carries specific evidence, so what you want out of each room is one concrete thing that person could write down: a bug you caught yourself, a trade-off you named, a decision you owned. The rest is arithmetic. The project you describe in a behavioural conversation is often the same system you sketched an hour earlier, and the two accounts have to agree.

What to demonstrate

Whether the scale, team size and timeline you attach to a project hold steady when that project resurfaces in a different round
Whether each interviewer leaves with a specific thing to cite rather than a general impression of competence
Whether a trade-off you defended in one round survives a challenge in another, instead of being quietly swapped for the answer the new interviewer seemed to want
Whether a question you have already answered earlier in the day gets the same answer at the same depth, without visible impatience

How to prepare

Write a one-page sheet per project fixing the figures you will quote — request volume, data size, team size, elapsed time, what broke — and say them aloud from the sheet until they come out identical every time
For each round on the schedule, decide in advance the one sentence you want in that person's notes, then check in a mock that you said it outright instead of leaving it to be inferred
Have someone ask you the same project question twice, an hour apart, and diff the two answers for numbers that moved or a trade-off that reversed

Where candidates lose points

Paginating a growing table with limit and offset

Two unrelated defects share the idiom. Correctness: rows inserted or deleted between page requests shift the window, so a consumer walking an export skips rows and sees others twice, which for a customer-facing sync is silent data loss rather than an error anyone notices. Cost: the database still produces and discards the skipped rows, so page N costs time proportional to N times the page size and a deep page on a large table degrades from milliseconds to seconds. Keyset pagination over a stable, unique, indexed ordering -- where (created_at, id) < ($1, $2) order by created_at desc, id desc limit $3 -- is constant-cost per page and immune to shifting, on the precondition that the cursor columns never change value for a row, which disqualifies updated_at as a cursor.

One shared connection pool for every tenant and every query class

A single tenant with a large table and a missing index can occupy every connection with slow queries, and every other tenant then waits in connection acquisition -- a queue invisible in database metrics, because the database itself looks healthy while the application starves. Containment is bulkheads: separate pools or per-tenant concurrency caps for interactive requests, background jobs and exports, a statement timeout low enough that a pathological query dies before it accumulates, and an idle-in-transaction timeout so a stuck client cannot pin a connection and its locks indefinitely. One caveat worth knowing in advance: if a transaction-pooling proxy sits in front of the database, session-scoped behaviour changes, so session-level advisory locks and settings applied outside a transaction do not survive the way they do on a direct connection.

Quoting amortised or average cost as if it were a worst-case guarantee

Appending to a dynamic array is amortised O(1), but the append that triggers a resize copies every element, and hash lookup is constant only while the hash spreads the actual keys. Say which guarantee you are offering when the caller cares about the latency of one call rather than the total over many.

Sorting when the problem never required a total order

Match the algorithm to the guarantee actually needed: the top k comes from a size-k heap in O(n log k) time and O(k) space, distinctness needs a set rather than an ordering, and a small bounded integer key range admits a linear counting pass. A full O(n log n) sort is the right default only when you genuinely need everything in order.

Questions & practice

Parse and verify a timestamped multi-signature webhook header

Easy · parsing · hmac · constant-time-compare · replay-protection

An inbound webhook carries a signature header of at most 1 KiB shaped t=<unix seconds>,v1=<64 hex chars>, with up to five v1 values during secret rotation and possibly unknown scheme keys. You hold the raw request body bytes and the currently active signing secrets. Write the parser and the verifier: accept when any active secret reproduces a signature and the timestamp is within a five-minute tolerance in either direction, reject otherwise. Single left-to-right pass over the header, no regular expression. State what is inside the MAC and why.

Approach

Parse in one scan: split on ,, then on the first = only, since a value may itself contain = under a future scheme. Accept t exactly once and treat a second t as a reject rather than last-wins. Push every v1 onto a short list and ignore any other key, so a v2 can be introduced later without breaking this verifier.
Say what is signed: HMAC-SHA256 over the exact byte string <t>.<raw body bytes>, yielding 32 bytes or 64 hex characters. The timestamp sits inside the MAC because otherwise an attacker replays yesterday's body with its still-valid signature and only has to edit the header timestamp.
Hash the bytes as received. Verifying against a re-serialised JSON body is the usual defect: key order, whitespace and number formatting all change the bytes while the parsed objects compare equal, so signatures fail for honest senders and the popular 'fix' is to stop checking.
Compare in constant time over fixed-length digests. Decode the hex to 32 bytes, accumulate acc |= a[i] ^ b[i] across the whole length, and test acc == 0 at the end. Evaluate every candidate without an early exit; at five candidates that is five HMACs over the body, linear in body size and negligible beside the network.
Apply the tolerance as a two-sided bound, rejecting when |now - t| > 300 seconds. A sender whose clock runs ahead of yours is an ordinary case, and an unbounded future timestamp is a free replay window.
Complexity: O(L) over the header producing k candidates, plus k HMACs at O(|body|) each. Space is O(k) beyond the body itself. Do the cheap rejections, including the tolerance check, before any cryptography runs.

Follow-up

The body is 40 MB. What changes about where you verify, and what can you do before the whole body has arrived?
A customer reports that signatures fail for exactly the requests whose body contains a non-ASCII character. What is your first hypothesis?
How do you rotate the signing secret with no failed deliveries, and how long do both secrets stay live?

Seal an hour under late data with bounded memory

Hard · watermarks · late-data · quantile-sketch · conditional-write

Metering ingest reads 256 partitions at 10,000 to 40,000 events/second. Events carry occurred_at and ingested_at, and during a producer replay the gap between them is hours. Seal each UTC hour once no more than 50 parts per million of that hour's eventual quantity can still arrive, using memory that does not grow with the size of the replay. Define the watermark, the lateness parameter and how you measure it, the structure holding open hours, and the write that performs the seal. State what an idle partition does to your watermark.

Approach

Two clocks, two jobs. Bucket by occurred_at, because that is the hour the customer is billed for, and advance the watermark on ingested_at, because that is what the fold has consumed and what source_max_ingested_at records. Conflating them is what makes late data invisible.
The global watermark is the min over partitions of each partition's committed ingested_at, not the max: the fold is trustworthy only as far as the slowest partition. The consequence is that one idle partition pins the watermark forever and nothing seals, so an idle partition must promote its watermark to wall clock after a stated idle timeout, and that timeout becomes a correctness parameter, because a partition that is slow rather than idle gets sealed past.
Choose the lateness L from the measured distribution of ingested_at - occurred_at, weighted by quantity rather than by event count. The target is 50 ppm of the hour's quantity, and a replay is rare in events while carrying disproportionate mass, so an event-weighted quantile picks an L that is comfortably wrong at exactly the moment it matters.
Measure that quantile in bounded memory. A Greenwald-Khanna summary gives epsilon-approximate quantiles in O((1/epsilon) log(epsilon n)) space; a t-digest costs more per merge but has relative error that tightens at the tails, which is the half of the distribution you are reading at p99.99. Keep a separate summary per tenant class, because one tenant's batch importer is not the population.
Hold open hours in a min-heap keyed by hour_start. When the watermark advances, pop every hour with hour_end + L < W and seal it: O(log H_open) per advance and O(1) amortised per event to touch its bucket. Memory is open hours multiplied by distinct (tenant, workspace, sku) keys, so cap the number of simultaneously open hours and spill the oldest into usage_rollup_hourly as status='open' with a revision bump. While an hour is open the row is upsertable, so the store is your overflow.
The seal itself is a conditional write: update ... set status='sealed', sealed_at=now() where status='open' returning .... Two sealers race on every restart, and the loser must see zero rows and stop rather than write a second value. After the seal, an event for that hour is not an upsert but an adjustment, and source_max_ingested_at is what proves it arrived afterwards.

Worked solution (40 min)

Replay a day of events with a synthetic lateness distribution: 99.9% under two minutes, plus a 0.05% tail at four to six hours that carries 3% of total quantity.
Compute the p99.99 lateness two ways, event-weighted and quantity-weighted, and put the two numbers side by side.
Implement the min-heap of open hours with the watermark as the min over 256 partitions, then stall one partition for 20 minutes and observe what seals.
Set the idle-partition timeout to 60 seconds, repeat the stall, and measure how much quantity arrives after the seal.
Attempt the seal from two workers at once and confirm the conditional update lets exactly one through.

Expected result: The quantity-weighted p99.99 is hours larger than the event-weighted one. Choosing L from the event-weighted number lets roughly the tail's 3% of quantity land after the seal, 600 times the 50 ppm target. With the min watermark and no idle timeout, the stalled partition blocks all sealing; with a 60-second timeout, the stall is sealed past and its events arrive late.

Verify it yourself

Post-seal quantity as a fraction of the hour's total is at or below 50 ppm at the chosen L, measured rather than assumed.
The second sealer's update reports zero rows affected and writes nothing.
Heap size equals the number of open hours and does not grow with the replay's event count.

Follow-up

A replay starts during the sealing window for a period you are about to close. What do you do, and what is the customer-visible consequence of each option?
Your measured quantity-weighted p99.99 lateness is six hours and the invoice must be issued at 02:00 UTC on the first. How do you reconcile those two numbers?
How would you detect that L has drifted before it costs you an hour's quantity?

Find peak concurrent sandbox usage from run intervals

Medium · sweep-line · intervals · concurrency-caps · null-semantics

Given up to 5 million job_run rows for one tenant over one day, with run_id, started_at, finished_at, status and wall_clock_limit_seconds, report the maximum number of sandboxes running at once, the earliest instant that maximum is reached, and the first run_id that would breach a per-tenant cap of C. started_at is null while a run is queued; finished_at is null both for runs still executing and for runs in status lost. Treat a run as occupying [started_at, finished_at). Give the complexity and state how you handle each null.

Approach

Turn each run into two sweep events, (started_at, +1) and (end, -1), then sort the 2n events by timestamp with -1 ordered before +1 at equal timestamps. That tie-break is what makes the interval half-open, so a run finishing at 10:00:00 and one starting at 10:00:00 never overlap.
Decide each null out loud before sweeping, because each choice moves the answer. A null started_at means queued and contributes nothing. A null finished_at with status running or leased is clipped to the window end. Status lost has no observed end at all, so clip it at started_at + wall_clock_limit_seconds on the grounds that the supervisor owns the timeout, and record that you did. The table's check (finished_at is null or started_at is not null) guarantees you never see an end without a start.
Sweep once, maintaining a running counter, the maximum, and the timestamp at which the maximum was first attained (update peak_at only on a strict increase, or you will report the last such instant instead of the earliest). Capture the first run_id whose +1 takes the counter to C+1 during the same sweep rather than in a second pass.
Complexity: O(n log n) dominated by the sort, O(n) space. If rows already arrive ordered by started_at, a min-heap of end times gives O(n log k) time and O(k) space with k the peak concurrency, which is the better shape when the rows come from an index scan on (tenant_id, started_at).
If second resolution is acceptable, counting-sort the endpoints into an 86,400-slot delta array and prefix-sum it: O(n + T) time and O(T) space, which beats the comparison sort at 5 million rows. It answers only at second granularity, so state which resolution the cap is defined in.

Follow-up

Now report peak concurrency per tenant for 10,000 tenants from one globally sorted stream. What changes about memory and about the sort?
The cap has to be enforced at dispatch rather than reported afterwards. What does the admission check look like, and where does it race?
How would you answer 'peak concurrency within any 5-minute window' without re-sorting?

Decide which facts an invoice line copies instead of joining

Medium · denormalisation · immutable records · foreign keys · rounding

invoice_line_item already denormalises tenant_id, which is reachable through invoice_id, and stores amount_minor even though quantity times unit_price_micros would recompute it. A reviewer asks you to normalise both away, and separately asks whether the tenant's legal name and billing address should be copied onto the invoice header. Decide each case. For every field you keep denormalised, name the read pattern or the invariant that justifies it, the anomaly the copy can develop, and the mechanism that prevents that anomaly here.

Approach

Split the question into two kinds of copy, because they fail differently. A copy of a currently mutable fact is a cache: it drifts and needs invalidation. A copy of a fact frozen at write time is not a cache at all, it is the record of what happened, and normalising it away destroys information the source no longer holds.
Keep tenant_id on the line. It costs 8 bytes, it leads every index on the table so no read is ever accidentally cross-tenant, and it turns a wrong join into an empty result rather than another tenant's money. Prevent the drift structurally: a unique constraint on invoice (invoice_id, tenant_id) plus a composite foreign key from the line on (invoice_id, tenant_id) makes a mismatched pair impossible, so the database enforces agreement instead of a code review.
Keep amount_minor. Rounding must happen exactly once, at a named site, with a stated mode (half-even here). If readers recompute from quantity and unit_price_micros, every reader owns a rounding decision, and half-up and half-even diverge systematically across thousands of lines rather than cancelling out. A check constraint can bound the stored value but deliberately cannot re-derive it.
Copy the legal name and billing address onto the invoice header, written once and never updated. The statement must show what was true when it was sealed, and the tenant record will change afterwards. This is a snapshot for the same reason source_rollup_watermark is stored per line: without it, nobody can reconstruct what the customer was told.
Name the read pattern that pays for all of it. Rendering, dispute response and export are per-tenant, per-period reads over thousands of lines that would otherwise join back to slowly changing dimensions that no longer hold the historical value. The write side is a once-per-period batch, so the extra columns cost nothing that matters.
Concede the case where the reviewer is right: a mutable operational attribute such as the tenant's current plan name has no business on a line. If a report wants it, join. If a statement needs the plan as of the period, that is another snapshot and it belongs on the header with the rest.

Follow-up

Write the composite foreign key and the unique constraint it requires on the parent. What does it cost on every line insert, and what does it do to a bulk load?
A tenant is renamed after being invoiced. Which rows change, and what does the customer see on last quarter's PDF?
Where does currency live, and what breaks if a tenant's billing currency changes between two periods?

Enforce a concurrent-run quota that survives simultaneous requests

Medium · isolation levels · write skew · quotas · lock contention

A plan allows at most 20 concurrently running rows in job_run per tenant. The table holds run_id, tenant_id, workspace_id, status (queued, leased, running, succeeded, failed, timed_out, cancelled, lost), lease_token, leased_until, started_at and finished_at. Today the service runs select count(*) from job_run where tenant_id = $1 and status = 'running', compares the result to 20, then inserts. Under load a tenant exceeds the cap by exactly the number of concurrent requests. Name the anomaly, say which isolation levels do and do not prevent it, and give a version that holds, as SQL.

Approach

Name it: write skew. Each transaction reads a predicate (the count of running rows), neither modifies what the other read, and both then insert rows that jointly violate an invariant no single row expresses. Read committed permits it. So does repeatable read, because snapshot isolation's first-updater-wins check fires only on conflicting row updates, and these are inserts touching disjoint rows.
Enumerate the fixes with their real costs. SERIALIZABLE works: PostgreSQL's SSI tracks the predicate read and aborts one transaction with SQLSTATE 40001, which obliges the caller to retry and makes the abort rate rise with contention on a hot tenant. Folding the predicate into the write as insert ... select ... where (select count(*) ...) < 20 narrows the race to the statement's snapshot but does not close it under read committed.
Give the version that holds at read committed: serialise on a row both transactions must touch. update tenant_concurrency set running = running + 1 where tenant_id = $1 and running < 20 returning running updates zero rows when the cap is reached, and zero rows is the rejection. This works because at read committed a blocked UPDATE re-evaluates its WHERE clause against the newly committed row; at repeatable read the same statement raises a serialisation error instead, so the isolation level changes the calling contract.
State the cost you just bought. That row is now a per-tenant serialisation point, so admission throughput for the tenant is bounded by one divided by the lock hold time; at a 2 ms hold that is roughly 500 admissions/second. Keep the critical section to the single UPDATE, with no network call or scheduling decision inside the transaction, and decrement in the same transaction that writes the terminal status.
Close the leak the status enum implies: a run can end as lost, so a crashed worker otherwise consumes a slot forever. Reconcile on a schedule against status = 'running' and leased_until < now(), and treat the counter as a fast path over job_run, which stays the system of record.

Worked solution (25 min)

Seed a tenant with 19 running rows, then fire 8 concurrent sessions each running the select-then-insert, and count the resulting running rows.
Repeat at REPEATABLE READ and confirm the count still exceeds 20.
Repeat at SERIALIZABLE, count the 40001 aborts, and note that without a retry loop those requests fail rather than queue.
Implement the atomic counter UPDATE, re-run the 8-way test, and confirm exactly 20 running rows with zero over-admissions.
Kill a worker mid-run, let the lease expire, and check whether the slot comes back without intervention.

Expected result: Write skew identified; read committed and repeatable read both permit it; serialisable prevents it at the price of 40001 retries; the working read-committed version is update tenant_concurrency set running = running + 1 where tenant_id = $1 and running < 20 returning running, whose zero-row result is the rejection, plus a reconciliation path for runs that terminate as 'lost'.

Verify it yourself

At 8x concurrency against a cap of 20, running rows never exceed 20.
The rejection returns zero rows rather than raising, so it is distinguishable from an error in the caller.
Killing a worker does not permanently consume a slot.
The counter and select count(*) from job_run where status = 'running' agree after reconciliation.

Follow-up

Write the retry loop for the SERIALIZABLE version. What does the caller see when it keeps aborting, and what bounds the retries?
Two regions each keep a counter. What is the effective cap, and what does admission do when the counter store is unreachable?
The cap changes mid-flight on a plan upgrade. Do running jobs get killed, and what does the counter row look like during the change?

Can you walk us through a project where you were responsible for the full software lifecycle?

Medium

Approach

Work from the requirement backwards to the design.
Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

How have you utilized C# and XAML to build functional GUI applications?

Medium

Approach

State your assumptions explicitly before working the problem.
Work from the requirement backwards to the design.
Clarify what is being asked and what a complete answer contains.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

What is your process for staying up-to-date with industry-specific technical standards?

Medium

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Work from the requirement backwards to the design.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

Webhook fan-out with per-endpoint isolation and backoff

Medium · fan-out · backpressure · circuit breaker · ordering

One domain event fans out to every matching subscription, producing a webhook_delivery row per (subscription_id, event_id, redelivery_seq). Peak unique event rate is 20k/second; attempts run five to ten times that once fan-out and retries are counted. One customer endpoint has returned 503 for six hours and its backlog holds days of events; every other customer must be unaffected. Design the delivery system: how a worker claims work, the backoff schedule, the per-endpoint circuit breaker, the queue partitioning, and whether you offer ordering per subscription. State the delivery guarantee in one sentence.

Approach

State the guarantee first, because it determines the rest: at-least-once with a stable event_id, and the consumer documented as responsible for idempotency. Exactly-once over HTTP is not deliverable - the 200 can be lost after the customer has already committed - so any design that promises it is either lying or is really offering at-most-once.
Partition work per subscription rather than into one global pool, with a concurrency cap per subscription. With a shared pool, the endpoint that has been dead for six hours consumes workers on retries that will fail, and every other customer's delivery latency rises: head-of-line blocking across tenants is the exact failure being designed against here.
Claim by compare-and-set with a fencing token: UPDATE webhook_delivery SET status = 'in_flight', lease_token = $new, leased_until = now() + interval '60 seconds' WHERE delivery_id = $1 AND status IN ('pending','failed_retryable') AND (leased_until IS NULL OR leased_until < now()), and make the terminal write carry AND lease_token = $new so a paused worker's late write is rejected rather than overwriting a newer attempt. Find due work through the partial index on next_attempt_at WHERE status IN ('pending','failed_retryable'), so the scan is proportional to live rows rather than to the terminal rows that outnumber them by orders of magnitude.
Use full jitter: sleep uniformly in [0, min(cap, base x 2^(attempt-1))]. Plain exponential backoff hands a recovering endpoint its entire backlog as one synchronised herd and knocks it over again; full jitter de-correlates it. Then check the schedule actually spans the retention you promise - with base 1 s and a 3,600 s cap, twenty attempts have an expected total elapsed time of only about 4.6 hours, so a twenty-four-hour promise needs roughly fifty-nine attempts or a larger cap.
Trip a circuit per endpoint on consecutive failures or a failure ratio over a rolling window: stop dispatching, push next_attempt_at out or mark new deliveries dropped_circuit_open, and half-open with exactly one probe rather than a batch. Bound the backlog explicitly with a per-subscription cap or retention, and decide in advance whether a recovered endpoint receives six hours of events at full rate or a pointer telling it to fetch what it missed.
Offer ordering only as an opt-in mode of one in-flight attempt per subscription, and price it honestly: with parallel attempts a retried event overtakes a newer one, so ordering requires serialisation, and serialisation means one slow endpoint blocks its own queue entirely. That converts a shared problem into that customer's own problem, which is the right place for it, but it is still a real cost.

Worked solution (35 min)

Compute the attempt rate: 20k unique events/second x mean fan-out x retry multiplier, and size worker pools and the per-subscription concurrency cap from it.
Write the claim statement and the terminal write, and point at the clause that rejects a resumed worker's stale write.
Tabulate the backoff for attempts 1 to 20 with base 1 s and cap 3,600 s, take the expected value of each full-jitter sleep as half its ceiling, and sum to get total expected elapsed coverage.
Decide the policy for a subscription down six hours: events buffered, bytes held, and what the customer actually receives when it returns.

Expected result: At-least-once with a stable event_id; per-subscription lanes with a concurrency cap; lease-and-fence claiming; full jitter whose schedule matches the retention promised - with base 1 s and a one-hour cap, twenty attempts covers only about 4.6 hours of expected elapsed time, so twenty-four hours needs roughly fifty-nine attempts or a larger cap; a per-endpoint breaker with a single half-open probe; ordering offered only as opt-in single-in-flight with head-of-line blocking named as its price.

Verify it yourself

Sum the expected sleeps in your schedule and compare against the retention window you promised the customer. If the two numbers disagree, one of them is wrong and it is usually the promise.
Execute the terminal write with a stale lease_token and confirm it affects zero rows. If it succeeds, the lease was doing the work alone and the token is decorative.
The dead endpoint's backlog must not be visible in any queue another subscription's workers poll. If one index scan serves all subscriptions, the isolation is nominal.

Follow-up

The endpoint recovers. Does it receive six hours of events at full rate, and what does that do to it?
Trace the exact code path by which an event belonging to one tenant could be signed and sent to another tenant's endpoint.
A customer insists they never received an event your row marks delivered. What evidence do you have, and what does payload_digest let you prove?

A rare job-run overwrite that logging makes disappear

Hard · fencing tokens · leases · concurrency

About one job run in fifty thousand records billable_seconds matching no observed sandbox lifetime, and a few rows show worker_id changing after finished_at was already set. It does not reproduce: debug logging around the terminal write made it vanish for two weeks before it returned. Runs last from 200 ms to 30 minutes, the lease is 60 seconds and is renewed while a run executes. Give an ordered checklist, the mechanism, and a fix that makes the illegal write impossible rather than merely rarer.

Approach

Mine the evidence instead of chasing a repro: select rows where updated_at is later than finished_at, or where a terminal status was written twice, and join them to attempt history to recover both writer identities. The defect has already happened tens of times and the rows are the recording.
State the signature before measuring it. If the cause is a lease that expired while the original worker was stalled, affected runs should cluster where the gap between the last renewal and the terminal write exceeds the lease, and should correlate with worker pause metrics rather than with workload shape.
Read the disappearance honestly. Logging inside the window changed the timing and lowered the probability; it is evidence about how narrow the window is, not a fix. Reproduce by widening the window on purpose, shortening the lease and injecting a pause between sandbox exit and the terminal write, rather than by adding more instrumentation.
Name the mechanism precisely: the lease expires during a stall such as a long garbage-collection pause or a brief partition, the run is re-dispatched, and the original worker then wakes and writes its terminal state over the new attempt's row. A lease alone cannot stop this, because the check and the write are separated by the stall.
Fix by fencing the write itself: UPDATE job_run SET status = $2, finished_at = $3, billable_seconds = $4 WHERE run_id = $1 AND status = 'running' AND lease_token = $5, with zero rows affected interpreted as having been fenced rather than as success. The token lives on the row so the store arbitrates, not the worker's memory.
Keep the state machine honest: a retry inserts a new row pointing at parent_run_id rather than resetting the old one, and a run whose worker vanished terminates as lost with billable_seconds null, because recording failure asserts an outcome nobody observed and then bills and retries on that assertion.

Follow-up

The supervisor also emits a usage event on completion. What does the fenced worker do about the event it already emitted, and how does metering absorb it?
Lease renewal is itself a network call. What happens when a renewal times out, and how does the worker decide whether it still holds the lease?
Why is lengthening the lease past the longest legitimate run the wrong lever, and what breaks if you do it anyway?

Suggested practice checklist

Day one measures instead of guessing, under a fixed rubric, and the remaining hours are allocated in proportion to the gaps before any studying begins. The allocation is deliberately not renegotiated midweek, because the area that feels worst on day three is usually the one that is moving.

Day 1 — Diagnostic, scored before you study anything

Sit a 110-minute diagnostic in four blocks: forty-five minutes on two coding problems, twenty-five on one design prompt taken to interface and data model, twenty of short-answer fundamentals, and twenty delivering two behavioural answers aloud.
Score each block from 0 to 3 on a fixed rubric where 3 is correct and fluent, 2 is correct but slow or prompted, 1 is partially correct and 0 is stuck, grading the artifact rather than how the attempt felt.
Allocate days two to five in proportion to 3 minus each block's score, write the allocation down, and commit to leaving it alone.

Deliverable: A scored rubric and a fixed hour allocation for the rest of the week.

Day 2 — Largest gap: find the boundary rather than the subject

Split the weakest area into named sub-skills and rate each separately. For coding those are restating the problem, choosing the structure, stating the invariant, turning the invariant into loop bounds, handling empty and single-element input, and accounting for complexity out loud.
Attempt three items positioned just above where the rating drops off, and for each write the first move you failed to make.
Re-attempt one of them from blank four hours later with nothing open.

Deliverable: A sub-skill map with the two blocking sub-skills circled.

Day 3 — Drill the blocking sub-skill by repeating the shape

Do eight short repetitions of the same shape rather than eight different problems, so what gets practised is the pattern and not the puzzle.
State the rule you now hold in one sentence, then test it against a case built to break it, a sliding window over an array containing negative values, or a cache-aside read path whose invalidation message is dropped.
Have someone else read your one-sentence rule and find the precondition you left out.

Deliverable: One rule statement with its preconditions attached and one counterexample that would have caught the incomplete version.

Day 4 — Second gap, plus maintenance on the strongest area

Run the same sub-skill decomposition on the second-largest gap in half the time.
Spend twenty-five timed minutes on the block you scored highest, choosing the hardest item you can still finish rather than a warm-up.
Write whether each area fails you on recall, on setup, or on execution, and set the fix accordingly: repetition for recall, a written checklist for setup, timed work for execution.

Deliverable: A second sub-skill map plus a one-line failure diagnosis for each area.

Day 5 — The gap that is not a skill

Record one technical and one behavioural answer, then count two things in the playback: seconds before your first clarifying question, and sentences you began without knowing where they would end.
Practise saying that you do not know, followed by how you would find out, without letting it soften into a guess, and practise stating a complexity or an estimate before being asked for it.
Redeliver one answer under a hard ninety-second cap, which forces structure ahead of detail.

Deliverable: Two recordings with a counted reduction in time-to-first-question.

Day 6 — Retest under day-one conditions

Sit the same 110-minute structure with new prompts of comparable difficulty and score it on the identical rubric.
For any block that did not move, change the method rather than adding hours: a block stuck at 1 usually means the practice was too varied, not too short.
Write down which single block you would still lose the offer on.

Deliverable: A second scored rubric placed beside the first, with one named remaining risk.

Day 7 — Full loop under interview conditions

Run a sixty-minute mock over the two blocks that moved least, with an interviewer briefed to interrupt and change direction mid-answer.
Write the recovery script for going blank: restate the question, state your assumption, name the first thing you would check.
Say every rule from the week aloud without reading it, and cut any you cannot state in a single sentence, since a rule you have to reconstruct mid-answer will not survive an interruption.

Deliverable: A one-page card holding the recovery script and only the rules you could state from memory.

Risky changes and the reversal path

For anything that touched live traffic, be ready to say how you would have undone it: a flag, a staged rollout, dual writes with the old path still authoritative. Once the old column is dropped or the source rows are overwritten there is no reverse, so name what you kept a copy of and for how long.

Can you describe your experience with C++ in a production environment?

Medium · behavioural and engineering judgement

Approach

Give the blast radius: what could have broken, and what you measured.
State the situation in two sentences and spend the rest on the reasoning.
Pick a story where you made the decision, not one where you watched it.

Follow-up

What did you decide not to do, and why?
What would you do differently if you ran that again?

Unblock an engineer on a job run that finished twice

Easy · mentoring · fencing tokens · lease expiry · debugging method

An engineer two weeks into the team brings you a job_run row showing status succeeded with an exit_code written by a worker declared dead ten minutes earlier; the retry attempt also shows succeeded. They have spent a day adding logging and are no closer. You have twenty minutes and you do not want to take the keyboard. Describe how you unblock someone: the question you ask first, what you let them find themselves, the concept you name and when, and how you check the next day that they own the fix rather than having watched you produce it.

Approach

Ask what they expect rather than what they see: which statement set status to succeeded, and what did it check before writing? That question points directly at the update's WHERE clause, which is where the answer lives, and it costs them nothing to answer, so it does not read as a test.
Let them build the timeline themselves from the row: queued_at, started_at, leased_until, finished_at and worker_id, on both the original run and the retry. Two different worker_ids with a lease expiry between them tells the whole story, and they will see it before you say it.
Name the concept once the evidence has earned it. A lease bounds time; it does not prevent a write. The store has to reject a stale writer, which means the update carries a fencing token the row compares — update job_run set status = 'succeeded' where run_id = $1 and lease_token = $2 and status = 'running' — and a long garbage-collection pause or a brief partition is enough to produce what they are looking at.
Point at the second, less obvious half and let them decide it: 'lost' exists in the status enum precisely so a run whose worker vanished is not recorded as failed, because failed asserts an outcome nobody observed and the system then bills and retries on that assertion. Ask them what these two rows should have said.
Leave them with the next step rather than the patch — a test that kills the first worker after the sandbox exits and before the row is written — and say when you are available again, so the offer is real rather than polite.
Check ownership the next day by what they produced, not by asking if it went well: a test that reproduces the window proves they understood it; a test that only asserts the new WHERE clause proves they copied it. Ask them to explain it to a third person and listen for whether the explanation is theirs.

Follow-up

They propose a longer lease instead of a token. What do you say, and what breaks when legitimate runs last thirty minutes?
How can you tell whether your explanation landed or they simply deferred to you?
The same engineer hits a variant of this next month. What did you fail to teach the first time?

Estimate a tenant-leading index migration you have never run

Hard · estimation · online migration · index builds · uncertainty

Someone needs a date. usage_event carries an index on (occurred_at) and needs (tenant_id, occurred_at); the largest tenant holds roughly a hundred times the median tenant's rows, the table is partitioned daily with years of retention, and you have never run a migration on a table this large. Give an estimate you would defend: how you decompose the work, the two or three numbers you would go and measure first, the range and confidence you state, and what you commit to when the person asking needs a single date today.

Approach

Refuse the bare number and then give one anyway, in the form that is actually useful: a range plus the measurement that collapses it. 'Four to eleven days; one afternoon building this index on a restored copy of the largest partition takes that to within a day' is an answer, while 'it depends' is not.
Decompose by failure mode rather than into equal chunks, because that is where estimates go wrong. On a partitioned parent you create the index ON ONLY the parent, build each partition's index with CREATE INDEX CONCURRENTLY, then ALTER INDEX ... ATTACH PARTITION, at which point the parent index becomes valid. CONCURRENTLY does not block writes but scans each partition twice, waits out older transactions, cannot run inside a transaction block, and on failure leaves an invalid index you must drop concurrently and retry.
Name the two unknowns that dominate and price them: build time on one restored partition of realistic size, and whether the planner actually chooses the new index for the skewed tenant, since selectivity for a tenant holding most of the rows is a different question from selectivity for the median tenant. Both are half-day measurements against a replica, and both are cheaper than being wrong by a week.
State the assumptions the range is conditional on, because that is what makes a slip a re-estimate instead of a credibility event: no partition above a stated row count, one concurrent build at a time so it does not compete with ingest for I/O, and an ingest backlog that can absorb the added write amplification while both indexes exist.
Budget the step nobody budgets: verification and the old index's removal. Dropping the old index is fast, but deciding it is safe to drop means confirming no plan still uses it, and that confirmation waits on real traffic across a full weekly cycle rather than on your patience.
Answer the single-date request honestly. Commit to a date for the first checkpoint — the measured build number from the replica — and to re-estimating on that date, and say plainly what you are not committing to yet. A date with a scheduled re-estimate is worth more to the asker than a confident wrong one, and you should say why in those words.

Follow-up

The concurrent build fails half way through the largest partition. What is the state of the database and what do you do next?
Your estimate slips by sixty percent. Which assumption broke, and at what point would you have known?
The person asking needs the date for a customer commitment. Does your answer change?