Interview guides · Engineer First

Engineer First Software Engineer Interview Questions & Guide 2026

Engineer First software engineer prep on databases: indexes, query plans, and the anomalies an isolation level still permits.

The 60-second brief

As a Software Engineer at Engineer First, you work within the company's technical operations and drive the development of its core systems. This role is not merely about writing code; it is about architecting solutions that solve complex challenges within the IT, Web, Gaming, and Telecommunications sectors. You will be instrumental in bridging the gap between high-level project requirements and scalable, high-performance software delivery.

Scope in the operational half of the job when the seat carries on-call. Rollout, rollback and what you would put on a dashboard belong inside a design answer rather than after it, and an answer that never reaches them reads as someone who has built systems but not run them.

Focus areas

Choose indexes from the query's access path
Paginate large result sets with keyset cursors
Bound every outbound call with a timeout

Overview

The impact of this role is significant, as you will often operate in capacities ranging from Software Engineer (SE) to Project Lead (PL), depending on your experience level and project scope. You will contribute to the lifecycle of critical products, keeping the company's technical solutions both innovative and reliable. Candidates report that Engineer First favors technical curiosity and a proactive mindset, since the role expects you to influence the company's product direction through your technical expertise.

Expect to work in an environment that prioritizes precision and collaborative problem-solving. Whether you are optimizing existing infrastructure or building new features from the ground up, your work will directly influence how the company serves users at scale. This position is ideal for those who thrive in fast-paced technical environments where technical mastery and project ownership are highly rewarded.

Where to focus your preparation

Treat the sections below as preparation areas and confirm the format with your recruiter.

Preparation focus

No round sequence has been reported for this company, so work the categories below and confirm the format with your recruiter.

What to demonstrate

Breadth across SQL, experimentation and product reasoning
Ability to state assumptions before choosing a method

How to prepare

Drill the practice exercises below and time yourself
Prepare three quantified stories about decisions you drove

Where candidates lose points

Paginating with LIMIT/OFFSET over a set that changes while the client is reading it

OFFSET n makes the database produce and discard n rows before returning anything, so the cost of a page grows with its depth rather than with its size and page 500 costs five hundred pages of work. The correctness problem is worse than the cost: if a row is inserted or reordered between two page fetches, rows shift across the offset boundary and are either skipped entirely or returned twice, and neither outcome leaves any trace in the response for the client to detect. Keyset pagination - WHERE (sort_key, id) < ($last_sort_key, $last_id) ORDER BY sort_key DESC, id DESC LIMIT n, backed by an index in exactly that order - reads only the rows it returns and is stable against concurrent inserts. It requires the tie-break column: a timestamp is not unique, and duplicate sort keys straddling a page boundary reintroduce the skip it was adopted to remove.

Choosing an index from the columns a query mentions rather than from how it filters and orders

A composite B-tree index on (a, b, c) can be seeked only as a left prefix: equality on a, then equality on b, then a range or an ordering on c. A query that filters on b alone cannot seek into it at all and at best gets a full scan of the index; a query that filters a and ranges on b gets no benefit from c, because the index is only sorted by c within a fixed (a, b) pair. The practical consequence is that one index per column is close to useless for multi-predicate queries while a single correctly ordered composite index turns a scan into a lookup. The ordering half is what gets missed: if the index cannot satisfy the ORDER BY, the database must read every matching row and sort before the limit can apply, so a LIMIT 20 over a million matching rows still reads a million rows.

Abandoning working code to chase the optimal solution

Get the straightforward version correct, state its complexity, and only then optimise, keeping the working version until the faster one passes the same cases. A correct quadratic solution with a stated path to linear beats a half-written optimal one that never ran.

Assuming the input fits in memory

Ask how large the input is in bytes before committing to an in-memory algorithm; beyond that point the options are a single streaming pass, an external sort with bounded buffers, or a sketch that trades exactness for constant memory. An algorithm that assumes random access to the whole input is a different algorithm from one that sees each element once.

Questions & practice

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.
Expire idle destinations, or memory grows with every destination ever seen rather than with the live set. Hold the rings in a bounded LRU keyed on destination_id and treat a miss as no history, which is the correct default for an endpoint that has been silent for a minute.
Keep the half-open probe out of the window arithmetic. After the circuit opens, one probe per interval decides whether to close it, and folding that single success into a window that still holds a 100 percent failure history would reopen the destination on one data point.

Follow-up

The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?
How would you make the window survive a process restart, and is it worth the cost?

Find overlapping job attempts and peak concurrency from lease records

Medium · sweep line · intervals · leases

A day of job_run history yields about 50,000,000 attempt records: (job_run_id, job_type, attempt, started_at, finished_at which is NULL when the worker died, lease_expires_at). Leases expire on a clock, so a job that outran its lease ran twice. Produce (a) every job_run_id whose attempts overlapped in wall-clock time and (b) the peak number of simultaneously running attempts per job_type with the minute it occurred. Target O(n log n). State how you treat a NULL finished_at and what clock skew does to your answer.

Approach

Define the interval before sorting anything: an attempt occupies [started_at, COALESCE(finished_at, lease_expires_at)). finished_at is observed and lease_expires_at is only a promise, so every attempt without a finish contributes an estimate and the whole result is a lower bound on overlap rather than an exact count.
For peak concurrency, sweep: emit 2n endpoints, sort by (timestamp, kind) with ends ordered before starts at equal timestamps, then walk the sequence maintaining a counter per job_type and record each type's maximum with its timestamp. O(n log n) dominated by the sort, O(n) space, or O(1) extra if the sort is external and the walk streams.
For overlap detection, do not compare attempts pairwise. A single global sort by (job_run_id, started_at) gives both the grouping and the order; within a group, keep the maximum end seen so far and report an overlap exactly when the next start is less than that running maximum, which is one linear pass after the sort.
Half-open intervals matter and are easy to get wrong: with closed intervals an attempt ending at the same millisecond another begins reads as concurrency two, and across 50,000,000 records that artefact swamps the real signal.
State the clock caveat: started_at and finished_at are written by different workers, so under skew of a few hundred milliseconds an apparent overlap shorter than that bound is not evidence. Filter reported overlaps by a minimum duration, or prefer timestamps written by whichever component heartbeats the lease.
Scale the sort rather than assuming it fits: the sweep emits two endpoints per attempt, so 50,000,000 records become 100,000,000 endpoints, and at roughly 24 bytes each, an 8-byte timestamp plus a 4-byte job_type plus a kind flag padded to alignment, that is about 2.4 GB of sort keys before any scratch space. Either push the ordering into the database behind an index on (job_type, started_at) or run an external merge sort in chunks; the overlap pass sorts n records rather than 2n, so it is the cheaper of the two.

Follow-up

A handler is not idempotent and you have found 400 overlapping jobs. Which of them actually caused damage, and what would you query to find out?
Peak concurrency for one job_type is 4 against a configured cap of 4. Is the cap working, or is the data hiding attempts that never started?
How would you compute both answers incrementally as records arrive rather than in a daily batch?

Canonicalise a request body into a stable idempotency fingerprint

Medium · parsing · canonicalisation · hashing

idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.

Approach

Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.
Frame the hash preimage so concatenation cannot collide: delimit or length-prefix the method, path and body, otherwise one request's fields can be rearranged into another request with the same byte stream and the same fingerprint.
Name the refusals and their consequence: no case folding, no dropping of null-valued keys, no Unicode normalisation. Each makes two different requests fingerprint alike, and the resulting failure is the worst one this table has, since the second request is answered with the first one's stored response and its effect never happens.

Worked solution (25 min)

Write the serialiser: recursive emit with a depth counter, objects sorted by UTF-8 key bytes, arrays in order, strings escaped by one fixed rule, numbers emitted as their original token.
Run it over three bodies: the same object with keys reordered, the same object with \u0041 written as A, and one with a nested array reversed. The first two must produce identical bytes and the third must not.
Take the id 9007199254740993, round-trip it through a double, show it returns as 9007199254740992, then state the rule that prevents this.
Define the hash preimage explicitly with its delimiters, and construct a pair of (path, body) inputs that would collide without them.

Expected result: A canonicaliser that is O(n log n) in body size with an enforced depth cap, sorts keys by UTF-8 byte order, preserves array order, keeps number literals verbatim, rejects duplicate keys, and feeds a delimited preimage to SHA-256, together with a stated list of normalisations deliberately not performed and the failure each would cause.

Verify it yourself

Key reordering and whitespace changes produce identical fingerprints while reordering an array does not.
A body containing an integer above 2^53 fingerprints identically after a parse and re-serialise round trip.
Two requests differing only in a field the endpoint ignores produce different fingerprints, and you can say why that is the safe direction to err.

Follow-up

A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
Where does the fingerprint get computed relative to request decompression and the body-size limit?
The endpoint takes 1,000 requests per second with 256 KB bodies. What does hashing cost, and does it belong at the edge or in the core service?

Explain why the owner filter ignores the listing index

Medium · composite index · query plans · sort elimination

The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.

Approach

Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.
Answer the two negatives explicitly. owner_user_id alone is not a left prefix of the new index, so it degrades to a full scan of the index at best. Ordered by updated_at, the query still seeks on the (tenant, owner) pair but must sort, because only created_at is ordered within that pair.
Measure both sides with EXPLAIN (ANALYZE, BUFFERS) and compare estimated against actual rows at the lowest node — a 2M-versus-200 misestimate there is usually what chose the plan, and adding an index will not fix a statistics problem.

Worked solution (25 min)

Load 2M resource rows across 5k owners in one tenant, run the query under EXPLAIN (ANALYZE, BUFFERS), and record the node reading the most rows plus the Sort Method line.
Create (tenant_id, owner_user_id, created_at DESC) concurrently and re-run, confirming the Sort node is gone and actual rows fall to about 20.
Run the two negative cases and capture the plan for each.
Re-run the original tenant listing query to confirm the new index has not displaced the index that query depends on.

Expected result: With (tenant_id, owner_user_id, created_at DESC) the plan is an Index Scan with no Sort, roughly 20 rows and a handful of buffers, sub-millisecond. owner_user_id alone still scans; ORDER BY updated_at seeks on the pair and then sorts that owner's rows.

Verify it yourself

Actual rows at the leaf node is on the order of the LIMIT, not the tenant's row count.
No Sort node appears above the index scan.
Buffers read stays constant as one owner's row count grows; if it grows with it, the ORDER BY is not being satisfied by the index.
pg_stat_user_indexes shows idx_scan climbing on the new index and not on the listing index for this endpoint.

Follow-up

90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
A dashboard runs this for 40 owners in one page load. What changes about the design?
How do you roll this index out on a table taking 1.2k writes/second, and what does it cost on every insert from then on?

Denormalise tenant onto revisions and backfill it live

Hard · denormalisation · online migration · backfill

resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.

Approach

Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.
Step three, backfill: batch by primary key rather than by created_at so the cursor is dense and resumable — UPDATE resource_revision rr SET tenant_id = r.tenant_id FROM resource r WHERE r.resource_id = rr.resource_id AND rr.revision_id > $1 AND rr.revision_id <= $1 + 5000 AND rr.tenant_id IS NULL — committing per batch and persisting the cursor. Throttle on replica replay lag and on dead-tuple count, since each batch writes 5,000 new row versions. Run the backfill before the index exists so those updates can stay HOT.
Step four, index then enforce then contract: CREATE INDEX CONCURRENTLY (cannot run inside a transaction block, scans the table twice, waits on open transactions, and leaves an INVALID index to drop concurrently if it fails); ADD CONSTRAINT ... CHECK (tenant_id IS NOT NULL) NOT VALID, then VALIDATE CONSTRAINT, which takes only SHARE UPDATE EXCLUSIVE, after which SET NOT NULL uses the validated check instead of re-scanning on PostgreSQL 12 and later. Only then move the audit reads onto the column and, in a later deploy, delete the join path.

Follow-up

The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
How do you verify the backfill actually finished, given rows are still being inserted while it runs?
A resource must now be movable between tenants. What does that do to the composite foreign key and to the revisions already written?

Explain your approach to debugging a complex system performance issue.

Medium

Approach

State your assumptions explicitly before working the problem.
Clarify what is being asked and what a complete answer contains.
Say what you would check first and why it is the highest-information step.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

How do you ensure code quality and maintainability in a large-scale project?

Medium

Approach

Clarify what is being asked and what a complete answer contains.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

What criteria do you use when choosing a specific framework or technology for a new feature?

Medium

Approach

Work from the requirement backwards to the design.
Say what you would check first and why it is the highest-information step.
Clarify what is being asked and what a complete answer contains.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

Evolve the resource contract without breaking integrations you cannot upgrade

Hard · versioning · backward compatibility · deprecation

GET /v1/resources/{id} returns status from a four-value enum ('draft','active','archived','deleted'), a numeric version, and the body inline. Consumers are a browser app you deploy and roughly 300 server-side integrations, some untouched for two years, that switch exhaustively on status and parse ids as JSON numbers. You must add a 'pending_review' status, move bodies over 256 KB to a body_ref pointer, and expose per-field change history from resource_revision. Specify the compatibility policy, the wire changes, how both generations are served, and the evidence that lets you remove the old shape.

Approach

Write the policy first and date it: fields are added, never retyped or repurposed; consumers ignore unknown fields; an unknown enum value maps to a documented fallback; nothing is removed until telemetry shows no caller reads it. Then say the uncomfortable part out loud - v1 shipped without the unknown-value rule, so 300 running integrations have no fallback, and no server change can install one into code that is already deployed.
That single fact forces per-request negotiation rather than a server-side default. Keep one internal model and select a serialiser from an explicit version in the request, and default a caller that sends nothing to the oldest supported version. Defaulting to the newest is the change that breaks every integration that never asked for anything, on the day you ship.
Downgrade 'pending_review' for old callers to the nearest state they already handle, 'draft', and state the loss explicitly: those integrations cannot see review state and will treat the resource as editable. If that is unacceptable for one integration, the remedy is moving it to the new version, not a cleverer projection - there is no mapping that invents a state the client has no code for.
Make the body change additive. Old callers keep body inline; the new shape adds body_ref and a size field, and resources over the limit are served to old callers by resolving the pointer server-side or by refusing with a documented code, chosen once and published. Never repurpose body to carry the pointer: a client that renders it shows a storage key to a user, and that failure is silent, where a missing field would have been loud. While you are here, serialise BIGINT ids as strings in the new shape - a browser parsing JSON numbers gets IEEE-754 doubles, exact only to 2^53 - and treat that as its own breaking change requiring the same negotiation, not a quiet fix.
Add change history as a separate sub-resource, GET /v1/resources/{id}/revisions, keyset-paginated over (resource_id, version) rather than as an array inside the resource. A field added to a hot response is paid for by every caller including those that never read it, and an unbounded array inside a cached object destroys the size assumptions the cache was configured with.
Retire on evidence rather than on a date alone: count requests per negotiated version per credential, publish a Sunset header (RFC 8594) with the removal date and a link to the migration, contact the credentials still on the old version, then answer 410 Gone once it is removed. Keep each version's serialiser under snapshot tests so a refactor cannot change v1's bytes by accident.

Worked solution (40 min)

Write and date the compatibility policy as five rules, then mark which of them v1 callers cannot honour.
Choose the negotiation mechanism and the default for an unversioned request, and justify the default in one sentence.
Write the downgrade table: new state to old state, new body shape to old body shape, and what is lost in each direction.
Specify the revisions sub-resource: its URL, its cursor, and why it is not a field on the resource.
Write the sunset plan: the per-version per-credential metric, the header, the lead time, and the terminal status code.

Expected result: A dated additive policy, version negotiation over one internal model with the oldest version as the default, a downgrade table with its losses named, history as a paginated sub-resource, and a removal gated on per-credential version telemetry rather than a calendar entry.

Verify it yourself

A two-year-old integration receives a resource that is really in 'pending_review' and neither crashes nor renders a blank state.
Deleting the legacy body field from the internal model breaks exactly one serialiser and no business logic.
Every v1 response is byte-stable under snapshot tests after an unrelated refactor.

Follow-up

An old integration submits a status transition while the resource is really in 'pending_review'. What does the write path accept, and what does it reject?
Two years on you want to delete the v1 serialiser. What evidence makes that safe, and who must be contacted before it happens?
How would you test against a two-year-old integration rather than against today's source?

Read latency spikes on a sixty-second sawtooth

Medium · cache stampede · single-flight · ttl · tail latency

The cached listing read path serves about 14k reads/second at an 85% hit rate. p99 sits at 35 ms for 57 seconds, jumps to 900 ms for 3, and repeats. During each spike the primary shows several hundred identical listing queries starting within the same millisecond, all carrying one large tenant's id. Cache entries use a 60-second TTL. Give the mechanism, the ordered checks, the fix, and the correctness hazard your fix must not introduce.

Approach

Match the period to a configured number before theorising about load. A spike every 60 seconds against a 60-second TTL is an entry expiring, and you confirm it by correlating spike timestamps with the entry's write time rather than with the traffic curve. If the period had matched a cron or a GC interval instead, this is a different investigation.
Establish the concurrency of the miss. Several hundred identical queries in one millisecond means the miss path has no coalescing: every request that arrives between expiry and repopulation recomputes. The herd size is that key's arrival rate times its recompute time, so at 1.2k reads/second for the hot key and a 250 ms recompute you expect about 300 concurrent misses, which matches what is observed.
Add single-flight on the miss path so one caller per key recomputes under a short-lived lock while the rest wait for its result. Prefer stale-while-revalidate where the read tolerates it: return the expired value immediately and refresh asynchronously, which removes the latency spike rather than serialising it into a queue of waiters.
De-synchronise the keys. Write TTLs with jitter, for example 60 seconds plus or minus 10%, so a deploy or a mass invalidation does not align every key on the same second and turn a per-key herd into a fleet-wide one.
Name the hazard the fix must not introduce. Serving a stale listing is acceptable only because the API reports the projection watermark, and a reader that loaded the old value before a write can repopulate the entry after the invalidation, so the bounded TTL is what actually caps staleness rather than the delete. Keep read-after-write pinned to the primary for the writing session regardless.
Verify on miss concurrency, not hit rate. The hit rate barely moves, because the herd is one miss multiplied; the number that must change is distinct origin queries per key per minute.

Follow-up

The same sawtooth appears on a key that is invalidated on write rather than expired. Is that the same bug?
How does your answer change if the recompute takes 4 seconds instead of 250 ms?
What exactly does a client see during a stale-while-revalidate window, and how does the watermark let them tell?

Suggested practice checklist

For someone fluent in a dynamic language who has shipped real work but has never had to say what the runtime is doing underneath. The week is built on measuring and deliberately breaking things, because the questions that expose this background are the ones where the interviewer asks why a second time.

Day 1 — Measure before reasoning

Take a slow piece of your own code, write down in advance where you believe the time goes, then profile it and record how wrong the guess was. The cost is usually an allocation you did not notice or an accidental quadratic membership test.
Replace one list membership test inside a loop with a set and measure at a thousand, ten thousand and a hundred thousand elements, confirming the shape of the curve rather than only that it got faster.
Write down the three quantities you can now measure instead of assert: wall time, peak memory, and call count for the function you suspected.

Deliverable: A before-and-after profile of real code plus a written note on the size of the gap between the guess and the measurement.

Day 2 — References, copies, and the bugs they produce

Write the function with a mutable default argument, call it three times, and explain the accumulating result: the default is evaluated once when the function is defined, so every call shares one object.
Build a nested structure, take a shallow copy, mutate an inner element, and show that both views changed, because a shallow copy duplicates the container and not the elements. Then fix it with a deep copy and state the cost you just accepted.
Write two functions, one mutating its argument in place and one rebinding the local name, and predict the caller's view of each before running it. That single distinction produces most of the bugs that pass their tests.

Deliverable: Three small programs whose output you predicted correctly before running, each with a one-line statement of the rule underneath.

Day 3 — Types, once, in a language that checks them

Port one module you have already written, roughly a hundred lines, into a statically typed language, and record every place the compiler demanded an answer your original had left implicit: a value that can be absent, a numeric width, a case never handled.
Write the same signature in both languages and state what the static one guarantees before the program runs and what it does not, since it will not save you from a wrong algorithm or an index out of range.
Write the difference between an interface satisfied by declaration and one satisfied structurally, with one case each where the other approach would miss the mistake.

Deliverable: One module in two languages plus a list of the questions the type checker forced you to answer.

Day 4 — Concurrency, starting with what actually runs at the same time

Run the same CPU-bound function across four threads and four processes and measure both. Under the default CPython build the threaded version will not speed up, because only one thread executes bytecode at a time; the process version will. Check which build you are on first, since free-threaded builds remove that lock and change the result.
Then run a blocking I/O workload across four threads and measure it speeding up, because the interpreter releases that lock around blocking calls, which is why treating threads as useless is wrong as a general claim.
Build the lost update: two threads each incrementing a shared counter a hundred thousand times, and show a final value below the expected sum, because an increment is a load, an add and a store and the thread can be suspended between them. Fix it with a lock and then measure what the lock costs.

Deliverable: Three measurements, threads against processes on CPU work, threads on I/O work, and a demonstrated lost update, each with the mechanism written underneath.

Day 5 — Debugging as a procedure rather than an instinct

Work one real failure as a bisection: find a revision or an input size where it is good and one where it is bad, halve repeatedly, and state the two assumptions bisection needs, that the property changes exactly once across the range and that the test is reliable.
Minimise one failing input to the smallest version that still fails, and record how many rounds it took.
Keep a hypothesis log for one bug in three columns, what I believe, what would disprove it, what I observed, and stop yourself the first time you are about to change two things at once.

Deliverable: One bug worked to root cause with a written hypothesis log and a minimised reproducing input.

Day 6 — Tests that catch the bug you are about to write

Implement an LRU cache with a capacity bound, then write the three test cases that would catch an off-by-one in eviction: insert exactly capacity items and assert nothing was evicted, insert one more and assert the least recently used key is the one gone, and read an old key just before that insert so the eviction victim changes.
Add a property test comparing your implementation against a deliberately slow reference, an ordered list scanned linearly, over a few thousand random operation sequences, because a slow reference finds the cases you would not have thought to write.
Write one numeric test that fails under exact equality and passes with a tolerance, and state why the tolerance has to be relative rather than absolute once the magnitudes grow.

Deliverable: An LRU implementation with three boundary tests, one property test against a slow reference, and one tolerance-based numeric test.

Day 7 — Debug something broken, out loud

Have someone plant three defects in a two-hundred-line program, an off-by-one, a shared mutable state bug, and a wrong error-handling path, then find them while narrating, under a fixed rule: state the hypothesis before touching anything.
Time each one and record which tool found it, reading, a printed value, a debugger, or a test, because the question asked in interviews is how you would find it rather than what it was.
Write the sentence you will use when you do not yet know the cause, one that names the next measurement instead of offering a guess.

Deliverable: A recorded debugging session with time-to-find per defect and the method that found each.

Outage answers are graded on instruments

Nobody is scoring your stamina at three in the morning. What carries weight is which signal told you something was wrong, what you measured before touching anything, what you rolled back versus what you fixed forward, and why you picked one. 'We restarted it and it went away' is a story about not knowing.

How do you handle technical debt while maintaining a high velocity of delivery?

Medium · behavioural and engineering judgement

Approach

Pick a story where you made the decision, not one where you watched it.
Close with what you would do differently, concretely.
Name the disagreement and how you resolved it with evidence.

Follow-up

How did you know your change caused the improvement?
What would you do differently if you ran that again?

Reverse your own decision and price the reversal

Medium · reversibility · measurement · migrations

Describe a technical decision you made and later reversed. Pick one that cost something: a service you split and merged back, a cache you added and removed, an index you created that pushed the planner onto a worse plan, a projection you rebuilt from scratch. State what you believed when you decided, the measurement that changed your mind, how long the wrong version ran in production, and what the reversal cost in migrations, dual writes, and a deprecation window for callers you did not own.

Approach

State the original rationale without irony, in the version you would still defend given what was known then. If it is not defensible, the story is about carelessness rather than judgement, and a different example serves you better.
Give the measurement that moved with a before and after: the p99 that did not improve, the cache hit rate that sat at 40%, the plan that flipped to a sequential scan once the table passed a size you can name.
Cost the reversal in steps, not adjectives: expand-and-contract deploys, the dual-write window, the callers who had to be notified, the rows already written in the wrong shape that had to be backfilled or abandoned.
Distinguish reversal from rewrite by naming what you kept. Most good reversals preserve the schema or the interface and undo one decision inside it, which is also why they were affordable.
Finish on the process change: the smallest experiment that would have produced the same measurement in a day, and why you did not run it the first time.

Follow-up

What in that decision was irreversible, and did you know it was irreversible when you made it?
How did you tell the people who had already built on top of the original decision?
What do you now measure before committing to a change of this size?

Argue against a design, lose, and commit anyway

Medium · disagreement · service boundaries · decision records

Describe a design you argued against and lost. State the failure you predicted as a named mechanism, not a feeling about complexity: two services that would need one transaction, a projection with no rebuild path, a write path with no idempotency key. Say what evidence you brought, what the decision maker weighed instead, and what you did after the decision was made: what you instrumented, what you wrote down, and whether the prediction came true. Five minutes.

Approach

State the prediction in falsifiable form up front: the mechanism, the condition that triggers it, and the observable outcome. A prediction that cannot be checked also cannot be credited to you later.
Show the evidence you had at the time and label each piece honestly as measured, analogous, or intuition. Keeping the intuition is fine; disguising it as data is the thing that erodes your standing in the next argument.
Represent the opposing case at full strength, including the constraint you did not control: a fixed date, a team boundary, or the fact that the decision was cheap to reverse and yours was not.
Make disagree-and-commit concrete. Name the artefact you left behind so the prediction could be settled without you: the alert and its threshold, the counter on the dashboard, the decision note that recorded the trade-off and the condition that would revisit it.
Report the outcome without editing it. If the design held and your predicted mechanism never fired, say so and say what you had mis-weighted, which is more persuasive than a vindication story.

Follow-up

What threshold on that alert would have proved you right, and did anyone ever look at it?
If the same proposal arrived tomorrow with the same deadline, would you argue it the same way?
How did you behave toward the design once it shipped and started failing in a different way than you predicted?