Energy progress Software Engineer Interview Guide

The 60-second brief

As a Software Engineer at Energy progress, you play a vital role in supporting the technological infrastructure that powers critical utility operations. This position is not merely about writing code; it is about building reliable, efficient solutions that support the complex requirements of the energy sector. Your work directly impacts the stability and effectiveness of systems that serve a wide range of operational needs, requiring a balance of technical precision and practical problem-solving. This role is both challenging and rewarding, as it places you within an organization that prioritizes safety, reliability, and long-term stability. You will collaborate with cross-functional teams to translate operational requirements into robust software, ensuring that the technology powering Energy progress remains resilient.

This guide is scoped to a Software Engineer candidate at Energy progress.

Focus areas

• Behavioral Interviewing
• Communication Skills
• Problem Solving

The Energy progress interview process

Energy progress candidates report 3 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Online Application

Submit your application online to express interest in the Software Engineer position.

What to demonstrate

• Submit your application online to express interest in the Software Engineer position
• Depth in Behavioral Interviewing

How to prepare

• Answer aloud and timed: Describe a time when you had to overcome a difficult problem.
• Answer aloud and timed: Describe a time when you experienced a conflict with your teammate.

Phone Screening

A preliminary call to assess your initial fit for the role.

What to demonstrate

• A preliminary call to assess your initial fit for the role
• Depth in Behavioral Interviewing

How to prepare

• Be able to walk your CV end to end in two minutes, and say why this company specifically.
• Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Panel Interview

Participate in an onsite or virtual panel interview with HR and engineering team members.

What to demonstrate

• Participate in an onsite or virtual panel interview with HR and engineering team members
• Depth in Behavioral Interviewing

How to prepare

• Answer aloud and timed: What are your personal strengths and how do they contribute to your work?
• Work Behavioral Interviewing until you can explain it without notes

Where candidates lose points

Structure your stories

Use the STAR method (Situation, Task, Action, Result) to keep your behavioral answers concise and impactful.

Be honest about weaknesses

When asked about a weakness, focus on the action you are taking to mitigate it. This shows self-awareness and a growth mindset.

Prepare for a panel

Since you will be interviewed by a group, ensure you make eye contact with everyone, not just the person who asked the question.

Research the utility space

Showing an interest in the specific challenges of the energy industry can set you apart from other qualified candidates.

Questions & practice

Collapse a redelivered event batch into per-aggregate high-water marks

Easy · hashing · at-least-once · aggregation

You drain a batch of up to 5,000,000 events, each (aggregate_id BIGINT, aggregate_version INT, event_type, payload). The log guarantees order within one aggregate only; the batch merges 64 partitions, and a relay failover has redelivered a range, so an older version for an aggregate can appear after a newer one. Given a map of last_applied_version per aggregate, produce the events worth applying, at most one per (aggregate_id, version), plus the count discarded. Target O(n) time. State the memory for 2,000,000 distinct aggregates and what you do when it does not fit.

Approach

1. One pass, one hash map from aggregate_id to the highest version kept, and a discard counter. An event whose version is at or below last_applied_version for its aggregate is dropped without further work, which is the whole reason the event carries its version rather than a delta. O(n) expected time, O(d) space in distinct aggregates.
2. Keep the maximum, never the last occurrence. The redelivered range means the final appearance of an aggregate in the batch can be an older version than one seen earlier in the same batch, so last-wins applies stale state over newer state and the projection regresses with no error anywhere.
3. Cost the memory instead of calling it large: an 8-byte key plus a 4-byte version is 12 bytes of payload, and an open-addressed table held at a 0.7 load factor costs roughly 17 bytes per entry before per-slot metadata, so 2,000,000 aggregates is tens of megabytes in a native layout and several times that in a runtime that boxes both key and value.
4. If the distinct set exceeds memory, partition on hash(aggregate_id) mod P and reduce each partition independently. Every event for one aggregate hashes to the same partition, so the per-partition result is exact and the merge is concatenation rather than a second reduction.

Follow-up

• The payload is a patch rather than a snapshot, so applying only the highest version loses the intermediate changes. What changes in your reduction?
• How do you detect that version 7 arrived while version 6 was never delivered, and what should the consumer do about the gap?

Merge partitioned event streams into one ordered feed with bounded lateness

Hard · k-way merge · watermarks · out-of-order streams

The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.

Approach

1. Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
2. Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
3. Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
4. Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.

Follow-up

• The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
• The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?

Diff a projection against the primary without per-row point reads

Hard · reconciliation · range hashing · throttling

The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.

Approach

1. Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
2. Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
3. For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
4. Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.

Follow-up

• The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
• Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?

Stop tag and share joins from fanning out a page

Medium · join fan-out · semi-joins · many-to-many

resource_tag is (resource_id, tag_id) with PK (resource_id, tag_id); resource_share is (resource_id, shared_with_user_id, permission). The tagged-and-shared listing inner-joins resource to both, filters tenant_id, tag_id = ANY($2) and shared_with_user_id = $3, orders by updated_at DESC and takes 50. Pages come back with fewer than 50 distinct resources and the total in the header is far too high. Explain the row multiplication, rewrite both the page query and the count query so each is correct, and name the index each one needs. PostgreSQL 16.

Approach

1. Do the arithmetic against the predicates that are actually there. An inner join emits one row per matching child row, and both joins are filtered: tag_id = ANY($2) admits only the requested tags, shared_with_user_id = $3 admits one user's share rows. So a resource holding three of the requested tags and shared with $3 once yields three rows, not one — the multiplier is its count of matching tags times its share rows for that single user, and that second factor is 1 unless the table admits duplicate (resource_id, shared_with_user_id) pairs. LIMIT 50 then limits rows rather than resources, and COUNT(*) counts pairs — the header is the product, not the population.
2. Reject DISTINCT as the fix. It deduplicates after the product has been built, so the planner must materialise and sort the fanned-out set before the LIMIT can apply, and it leaves any SUM or AVG in the same select list wrong.
3. Rewrite both filters as semi-joins, keeping resource as the only row source: AND EXISTS (SELECT 1 FROM resource_tag rt WHERE rt.resource_id = r.resource_id AND rt.tag_id = ANY($2)) and the same shape against resource_share. A semi-join stops at the first match per resource and preserves the driving index order, so ORDER BY updated_at DESC, resource_id DESC LIMIT 50 still stops after 50 rows.
4. Count with the same predicates and no join at all: SELECT count(*) FROM resource r WHERE r.tenant_id = $1 AND r.status = 'active' AND EXISTS (...) AND EXISTS (...). Nothing multiplies a resource, so the number is the population.

Follow-up

• The filter changes from 'any of these tags' to 'all of these tags'. Rewrite it and state what it costs relative to the ANY form.
• A resource can be shared with the same user twice under different permissions. Does your count change, and should it?

Explain why the owner filter ignores the listing index

Medium · composite index · query plans · sort elimination

The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.

Approach

1. Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
2. For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
3. Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
4. Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.

Follow-up

• 90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
• A dashboard runs this for 40 owners in one page load. What changes about the design?

Describe your greatest weakness and how you will work to resolve it.

Medium · Personal Development and Self-Awareness

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

What are your personal strengths and how do they contribute to your work?

Medium · Personal Development and Self-Awareness

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

p99 jumped on one listing filter while p50 stayed flat

Medium · query planning · composite index · percentiles

After a release that added an owner_user_id filter to the resource listing, p99 rose from 90 ms to 1.9 s while p50 stayed at 40 ms. Traffic and row counts are unchanged. resource carries the index (tenant_id, status, updated_at DESC, resource_id DESC). The new query filters tenant_id and owner_user_id, orders by updated_at DESC, resource_id DESC, and takes 20 rows. On PostgreSQL, explain the shape of the regression, prove it from a query plan, and give the index you would add.

Approach

1. Start from the shape. A flat p50 with a moved p99 means a subset of requests changed cost, not all of them, so the first job is naming the subset. Bucket the endpoint's latency by the tenant's row count; the natural hypothesis is that large tenants are a small share of requests and all of the tail.
2. Get the plan for the new query on a large tenant with EXPLAIN (ANALYZE, BUFFERS). Expect an index scan over the tenant's range, a filter discarding most of it, then a Sort feeding the Limit, possibly reporting Sort Method: external merge Disk. Read actual rows on the scan node, not estimated.
3. Explain why the existing index cannot serve it. A composite B-tree is seekable only as a left prefix, and with no equality predicate on status the scan cannot treat updated_at as an ordering, because rows in the tenant's range are ordered by status first. Everything matching must be read and sorted before LIMIT 20 can apply, so a tenant with 400,000 rows pays 400,000 rows to return 20.
4. Add (tenant_id, owner_user_id, updated_at DESC, resource_id DESC). Equality on the first two columns leaves the index ordered by updated_at within that pair, so the plan becomes an index scan that stops after 20 rows with no Sort node. PostgreSQL can scan a B-tree backwards, so the DESC markers matter only if the two sort columns ever disagree in direction; keeping them explicit documents the order the keyset cursor depends on.

Follow-up

• The endpoint paginates with OFFSET. What does page 500 cost with your index, and what does the keyset version cost?
• How would you have caught this before release, given that a 10,000-row seed database produces the same plan shape at an unnoticeable cost?

Suggested practice checklist

Built from the rounds and topics Energy progress candidates report.

Day 1 — Map the Energy progress loop

• Write out the reported sequence: Online Application, Phone Screening, Panel Interview.
• For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 3 reported rounds, with the weakest marked.

Day 2 — Work Behavioral Interviewing

• Spend the session on Behavioral Interviewing, which Energy progress candidates report being tested on.
• Write one worked example in Behavioral Interviewing and time yourself on it.

Deliverable: One timed worked example in Behavioral Interviewing.

Day 3 — Work Communication Skills

• Spend the session on Communication Skills, which Energy progress candidates report being tested on.
• Write one worked example in Communication Skills and time yourself on it.

Deliverable: One timed worked example in Communication Skills.

Day 4 — Work Problem Solving

• Spend the session on Problem Solving, which Energy progress candidates report being tested on.
• Write one worked example in Problem Solving and time yourself on it.

Deliverable: One timed worked example in Problem Solving.

Day 5 — Answer out loud: Behavioral and Leadership

• Answer aloud, timed: Describe a time when you had to overcome a difficult problem.
• Answer aloud, timed: Describe a time when you experienced a conflict with your teammate.

Deliverable: Spoken answers to 2 reported Behavioral and Leadership question(s), under time.

Day 6 — Answer out loud: Personal Development and Self-Awareness

• Answer aloud, timed: Describe your greatest weakness and how you will work to resolve it.
• Answer aloud, timed: What are your personal strengths and how do they contribute to your work?

Deliverable: Spoken answers to 2 reported Personal Development and Self-Awareness question(s), under time.

Day 7 — Dry run for Energy progress

• Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Describe a time when you had to overcome a difficult problem.

Medium · Behavioral and Leadership

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Describe a time when you experienced a conflict with your teammate.

Medium · Behavioral and Leadership

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

How do you demonstrate team leadership skills?

Medium · Behavioral and Leadership

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?