Eli Lilly Software Engineer Interview Guide

The 60-second brief

As a Software Engineer at Eli Lilly, you are at the intersection of cutting-edge technology and global healthcare innovation. This role is not merely about writing code; it is about building the digital infrastructure that supports the development, manufacturing, and distribution of life-changing medicines. Your work directly impacts the efficiency of our supply chain, the precision of our research data, and the delivery of critical solutions to patients worldwide. You will likely work in collaborative, cross-functional environments where engineering expertise meets complex industrial or scientific challenges. Whether you are integrating advanced systems like SAP EWM or developing software to optimize packaging and logistics, your contributions are foundational to maintaining the high standards of a global pharmaceutical leader.

This guide is scoped to a Software Engineer candidate at Eli Lilly.

Focus areas

• Software Engineering (General)
• SAP EWM (Extended Warehouse Management)
• System Integration

The Eli Lilly interview process

Eli Lilly candidates report 2 rounds over 2-4 weeks. The stages below are what candidates describe, not a published process.

Phone Screen

Initial call conducted by a recruiter to understand your background and verify your interest in the company.

What to demonstrate

• Initial call conducted by a recruiter to understand your background and verify your interest in the company
• Depth in Software Engineering (General)

How to prepare

• Be able to walk your CV end to end in two minutes, and say why this company specifically.
• Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Rounds

Rounds designed to test hands-on engineering capabilities through coding exercises and discussions on architecture.

What to demonstrate

• Rounds designed to test hands-on engineering capabilities through coding exercises and discussions on architecture
• Depth in Software Engineering (General)

How to prepare

• Answer aloud and timed: How do you ensure code scalability in a high-stakes production environment?
• Answer aloud and timed: Describe your experience with specific system architectures or platforms relevant to the role.

Where candidates lose points

Research the company mission

Understand how Eli Lilly uses technology to drive medical innovation.

Practice articulating your work

Be ready to explain your past projects concisely, focusing on the "what," "how," and "why."

Be honest about your process

If you are stuck during a coding test, explain what you are thinking. Interviewers value transparency and the ability to iterate.

Prepare questions for them

Asking thoughtful questions about the team's current challenges shows you are already thinking like an engineer on their staff.

Questions & practice

General LeetCode-style coding challenges (ranging from easy to medium difficulty).

Medium · Technical and Coding Proficiency

Approach

1. Restate the input: its shape, its size, and what is guaranteed about it.
2. Name the brute-force solution and its complexity before improving on it.
3. Choose the data structure from the access pattern, not from familiarity.
4. State the target complexity and say which constraint rules the naive version out.

Follow-up

• How does this change if the input no longer fits in memory?
• What is the worst case, and how likely is it on real data?

Canonicalise a request body into a stable idempotency fingerprint

Medium · parsing · canonicalisation · hashing

idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.

Approach

1. Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
2. Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
3. Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
4. Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.

Follow-up

• A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
• Where does the fingerprint get computed relative to request decompression and the body-size limit?

Diff a projection against the primary without per-row point reads

Hard · reconciliation · range hashing · throttling

The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.

Approach

1. Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
2. Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
3. For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
4. Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.

Follow-up

• The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
• Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?

Where did you hear about us, and why do you want to join Eli Lilly?

Medium · Behavioral and Professional Alignment

Approach

1. Name the grain you start from and join outward from it.
2. Check whether any join is one-to-many before aggregating, or the sums inflate.
3. Say which index the query would use, and what makes it unusable.
4. Handle the rows that do not match: that is usually the actual question.

Follow-up

• How does the query change if that join becomes one-to-many?
• What happens to this when the table is ten times larger?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

1. Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
2. Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
3. Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
4. State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.

Follow-up

• A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
• The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?

How do you ensure code scalability in a high-stakes production environment?

Medium · Technical and Coding Proficiency

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

Rebuild the search projection while it serves nine thousand queries

Medium · projections · eventual consistency · rebuild

The read-model service answers about 9k queries/second at a 120 ms p99 from a projection built off the event log, normally under 2 seconds behind. A mapping change forces a full rebuild from resource_revision, during which apply lag rises to minutes. Writes continue at 1.2k/second and events at 4k/second. Design the rebuild: how the new index is populated and cut over, how position is tracked per log partition, what the API returns alongside results so a client can tell a stale answer from a current one, and the criterion for cutting over.

Approach

1. Build into a second index and swap an alias rather than mutating the live one. The rebuild is then reversible by pointing the alias back, so a bad mapping costs a wasted rebuild instead of an outage. The price is peak storage for two full copies and double apply load during catch-up, and both numbers should be stated up front rather than discovered when disk fills.
2. Track position per log partition, not globally. Order is guaranteed only within an aggregate's partition, so progress is a vector, and the only number safe to publish is taken from the least advanced partition - the slowest one is what bounds completeness. Publishing the most advanced partition's position declares the projection current while another partition sits twenty minutes behind.
3. Make apply idempotent so the backfill and the live tail can overlap without a freeze. Each document records the aggregate_version it reflects, and any event at or below that version is discarded. This is why the event carries the full fact and not a delta: a delta cannot be discarded safely, and a consumer that calls back to read current state applies a state newer than the event it is processing, which is how a projection ends up with changes applied out of order.
4. Turn lag into a contract instead of a surprise. Return the watermark with every result set, and return the version produced by a write so the client can compare the two. A client that wrote version 7 and receives results at a watermark older than its own commit can show that its change is still landing, rather than rendering the previous value as current. Blocking the read until the projection catches up would convert a staleness problem into an availability problem at 9k queries/second, and choosing not to do that is the trade.

Follow-up

• The rebuilt index disagrees with the primary tables for 300 documents. Which is authoritative, and how do you decide without freezing writes?
• The rebuild doubles load on the log and pushes the projection p99 from 120 ms to 400 ms. What do you throttle, and which signal sets how much?

Explain your approach to debugging a complex system integration issue.

Medium · Technical and Coding Proficiency

Approach

1. Establish what changed and when, before forming any theory.
2. Pick a bisection that eliminates candidates whichever way it turns out.
3. Check the instrumentation before believing the symptom.
4. Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

• What would you look at first, and what would it rule out?
• How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the rounds and topics Eli Lilly candidates report.

Day 1 — Map the Eli Lilly loop

• Write out the reported sequence: Phone Screen, Technical Rounds.
• For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 2 reported rounds, with the weakest marked.

Day 2 — Work Software Engineering (General)

• Spend the session on Software Engineering (General), which Eli Lilly candidates report being tested on.
• Write one worked example in Software Engineering (General) and time yourself on it.

Deliverable: One timed worked example in Software Engineering (General).

Day 3 — Work SAP EWM (Extended Warehouse Management)

• Spend the session on SAP EWM (Extended Warehouse Management), which Eli Lilly candidates report being tested on.
• Write one worked example in SAP EWM (Extended Warehouse Management) and time yourself on it.

Deliverable: One timed worked example in SAP EWM (Extended Warehouse Management).

Day 4 — Work System Integration

• Spend the session on System Integration, which Eli Lilly candidates report being tested on.
• Write one worked example in System Integration and time yourself on it.

Deliverable: One timed worked example in System Integration.

Day 5 — Answer out loud: Technical and Coding Proficiency

• Answer aloud, timed: General LeetCode-style coding challenges (ranging from easy to medium difficulty).
• Answer aloud, timed: Explain your approach to debugging a complex system integration issue.

Deliverable: Spoken answers to 2 reported Technical and Coding Proficiency question(s), under time.

Day 6 — Answer out loud: Behavioral and Professional Alignment

• Answer aloud, timed: Tell me about your work experience and how it relates to this role.
• Answer aloud, timed: Where did you hear about us, and why do you want to join Eli Lilly?

Deliverable: Spoken answers to 2 reported Behavioral and Professional Alignment question(s), under time.

Day 7 — Dry run for Eli Lilly

• Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Describe your experience with specific system architectures or platforms relevant to the role.

Medium · Technical and Coding Proficiency

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Tell me about your work experience and how it relates to this role.

Medium · Behavioral and Professional Alignment

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Describe a time you faced a technical roadblock; how did you communicate this to your team?

Medium · Behavioral and Professional Alignment

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

How do you prioritize tasks when working on high-impact, time-sensitive projects?

Medium · Behavioral and Professional Alignment

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?