Interview guides · DHL Express

DHL Express Software Engineer Interview Questions & Guide 2026

A prep plan for DHL Express software engineer candidates: answer first, read the solution second, repeat the misses later.

The 60-second brief

As a Software Engineer at DHL Express, you are at the heart of a global logistics engine that powers international trade. This role is not just about writing code; it is about building scalable, resilient software solutions that track shipments, optimize routing, and ensure seamless communication across a complex, worldwide supply chain. You will be instrumental in bridging the gap between high-level operational strategy and the technical execution required to move millions of packages daily.

Most rounds test how you handle an under-specified problem more than what you recall. A wrong first approach you correct out loud is recoverable; a constraint you assumed silently and were never given is the expensive mistake.

Focus areas

Make every write idempotent under retry
Paginate large result sets with keyset cursors
Bound every outbound call with a timeout

Overview

The work is characterized by its scale and its tangible impact on global commerce. You will likely contribute to critical internal tools, logistics management platforms, or customer-facing interfaces that require high reliability and performance. Whether you are working on backend systems, database optimization, or full-stack application development, your contributions directly influence the efficiency of DHL Express operations. The environment is fast-paced, and success here requires a balance of technical rigor and a pragmatic approach to solving real-world logistical challenges.

The DHL Express interview process

DHL Express candidates report 4 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Screening Phase

When a round has no standard shape, it is often there because something is still open: an area no earlier conversation reached, a round where the signal came out mixed, or a decision someone is not ready to make alone. Work out which by going back over what each earlier round actually covered rather than how it felt, and arrive able to give evidence on that point without being asked twice. Weak answers replay the loop's earlier material at the same depth. Strong ones go a level deeper and stay consistent with what you already said.

What to demonstrate

Whether your account of a project matches the one you gave earlier in the loop, since what you said before may be available to whoever runs this round
Whether you can go a level deeper on something already covered, reaching the decision and its alternatives rather than repeating the summary
Whether you state your own uncertainty accurately, including parts of a system you did not build and decisions you inherited, instead of claiming even ownership across all of it
Whether you can answer a question you handled poorly earlier by naming what you missed, rather than delivering a polished second version as if the first had not happened

How to prepare

Reconstruct the loop on one page: for each round, the questions you were asked and the answer you actually gave, not the better one you thought of afterwards. The gaps on that page are your best available guess at why this round exists.
Take the two claims you made earlier that carry the most weight and assemble the backing for each: the measurement, the date, what broke, the decision you would make differently now.
Write down the three facts about your work that must not drift between tellings, such as team size, timeline and your own role, and check your stories against that list rather than trusting recall under pressure

Interview Rounds

An unlabelled round is first an information problem, and the cheapest information is free. Whoever schedules it can usually tell you how long it runs, who will be in the room and what they work on, whether you will be writing code and in what environment, and whether anything is being sent beforehand. Ask in writing so the answer is on record, then prepare for the two or three formats those answers still leave open instead of betting on one. What separates a strong candidate is not guessing right; it is having an opening that works whichever one it turns out to be.

What to demonstrate

Whether you can start work from an ambiguous brief, since tolerating a vague scope without stalling is the same thing the job asks for
Whether the questions you asked beforehand were ones that change your preparation, such as duration, medium and who is joining, rather than ones whose answers you could not have acted on
Whether you adapt when the round turns out to be something other than what you were told, instead of spending the first ten minutes visibly recalibrating

How to prepare

Send one short scheduling message asking four things: how long, who is joining and what they work on, whether you will be writing code and where, and whether to prepare anything in advance. Treat a vague reply as real information, since it means the round is loosely structured and you will be shaping it yourself.
Write one opening that works in any of the formats still open: restate in your own words what you have been asked to do, then ask which of two directions is more useful to them. Say it aloud until it stops sounding recited.
Set up for the two most likely formats before the call starts, with a blank editor in the language you would choose and a shared document you can type into, so a format surprise costs you nothing in the first minutes

Panel Interviews

A day like this is several different games in a row, and the expensive mistake is carrying the previous one into the next room. Coding rewards narrow precision and finishing inside a timer. Design rewards breadth, stated assumptions and naming what you are deliberately not building. Behavioural rewards specificity about people and decisions. Candidates who over-engineer a coding problem they were supposed to finish, or who start sketching class hierarchies before anyone has agreed what the system has to do, are usually still playing the last round. Between rooms, name out loud which game the next one is.

What to demonstrate

Whether the coding round ends with something that runs and has been traced against a degenerate input, rather than an extensible design that was never finished
Whether a design discussion opens by agreeing on traffic shape, read-to-write ratio and what is allowed to be stale, instead of proceeding from an architecture you arrived with
Whether a behavioural answer names a person, a disagreement and what you did about it, rather than describing the system the story happened inside
Whether the opening habits still appear late in the day: restating the problem, asking for constraints, saying the plan before typing

How to prepare

Book three mocks of different types back to back on one afternoon and ask each interviewer afterwards which round you answered in the wrong mode
Write a three-line opening script per round type — coding: restate, name the approach and its cost, then type; design: ask for scale, read-write mix and what must not break; behavioural: name the person, the stakes and the decision — and run it off a card so the switch is mechanical rather than remembered
Practise coding with a timer you do not extend, stopping when it stops, so the trained reflex is to finish a correct solution rather than to keep improving one

Final Assessment

Nobody in the room with you decides this. Interviewers typically write their rounds up separately, often before seeing anyone else's, and the outcome is settled later from those write-ups. A split panel gets resolved by whichever note carries specific evidence, so what you want out of each room is one concrete thing that person could write down: a bug you caught yourself, a trade-off you named, a decision you owned. The rest is arithmetic. The project you describe in a behavioural conversation is often the same system you sketched an hour earlier, and the two accounts have to agree.

What to demonstrate

Whether the scale, team size and timeline you attach to a project hold steady when that project resurfaces in a different round
Whether each interviewer leaves with a specific thing to cite rather than a general impression of competence
Whether a trade-off you defended in one round survives a challenge in another, instead of being quietly swapped for the answer the new interviewer seemed to want
Whether a question you have already answered earlier in the day gets the same answer at the same depth, without visible impatience

How to prepare

Write a one-page sheet per project fixing the figures you will quote — request volume, data size, team size, elapsed time, what broke — and say them aloud from the sheet until they come out identical every time
For each round on the schedule, decide in advance the one sentence you want in that person's notes, then check in a mock that you said it outright instead of leaving it to be inferred
Have someone ask you the same project question twice, an hour apart, and diff the two answers for numbers that moved or a trade-off that reversed

Where candidates lose points

Running a schema change as though the lock lasts as long as the statement

In PostgreSQL an ALTER TABLE that needs an ACCESS EXCLUSIVE lock must first wait for every open transaction touching that table, and while it waits, later queries needing a conflicting lock queue behind it rather than overtaking it. A DDL statement that would execute in milliseconds, issued while a thirty-second analytics query is open, therefore stalls all traffic on that table for thirty seconds: the outage length is set by the longest open transaction, not by the change. The defences are specific and worth knowing by name - set lock_timeout low and retry rather than queue, add columns without a volatile default so no table rewrite occurs (from version 11 a non-volatile default is a metadata-only change), build indexes with CREATE INDEX CONCURRENTLY while accepting that it cannot run inside a transaction block and leaves an invalid index behind if it fails, and add constraints as NOT VALID followed by a separate VALIDATE CONSTRAINT, which takes a weaker lock.

Letting a slow dependency consume unbounded concurrency

The failure that takes a service down is usually not an error but a delay. A dependency answering in thirty seconds instead of fifty milliseconds holds each request's worker or connection six hundred times longer, and since required concurrency is arrival rate times latency, a fleet sized for sixty in-flight requests now needs thirty-six thousand to sustain the same rate - so it queues, and requests whose clients have already abandoned them still occupy resources. Retries make it precisely worse: a policy of three attempts triples the load on a dependency at the exact moment it is least able to serve, which is how one slow dependency becomes an outage of everything sharing that pool. Containment is four specific things - a timeout on every outbound call shorter than the caller's remaining budget, a bounded pool per dependency so one cannot starve the others, backoff with full jitter rather than a fixed delay so retries do not resynchronise, and a circuit that stops sending once the failure rate makes an attempt pointless.

Issuing one query per row of a result set

Fetch related rows in a single batched query keyed by the ids you already hold, or join them into the original query. A per-row round trip multiplies network latency by the row count, and it looks perfectly fine against the ten rows in your development database.

Tests that assert on the implementation rather than the behaviour

Assert on what a caller can observe, not on the number of internal calls or the shape of a private field. A test that breaks on every refactor but still passes when the answer is wrong costs more than it protects.

Questions & practice

How do you ensure your code is maintainable and scalable?

Medium · data structures and algorithms

Approach

Restate the input: its shape, its size, and what is guaranteed about it.
Walk one small example through your approach before writing the whole thing.
Choose the data structure from the access pattern, not from familiarity.

Follow-up

What is the worst case, and how likely is it on real data?
Which test case would catch an off-by-one here?

How do you approach process improvement when presented with a case study?

Medium · data structures and algorithms

Approach

State the target complexity and say which constraint rules the naive version out.
Name the brute-force solution and its complexity before improving on it.
Choose the data structure from the access pattern, not from familiarity.

Follow-up

Which test case would catch an off-by-one here?
What is the worst case, and how likely is it on real data?

Can you describe the most significant technical challenge you have faced in a project and how you resolved it?

Medium · data structures and algorithms

Approach

Choose the data structure from the access pattern, not from familiarity.
Walk one small example through your approach before writing the whole thing.
Name the brute-force solution and its complexity before improving on it.

Follow-up

Which test case would catch an off-by-one here?
What is the worst case, and how likely is it on real data?

Can you elaborate on the architecture of your previous projects?

Medium · data structures and algorithms

Approach

Name the brute-force solution and its complexity before improving on it.
State the target complexity and say which constraint rules the naive version out.
Walk one small example through your approach before writing the whole thing.

Follow-up

How does this change if the input no longer fits in memory?
Which test case would catch an off-by-one here?

Archive a resource graph without breaking live references or recursing

Medium · graph traversal · topological order · tenant isolation

Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.

Approach

Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.
Store the graph as CSR rather than a map of lists: an offsets array of V+1 8-byte entries plus E 8-byte targets is about 80 MB at this size, where boxed adjacency lists cost several times that and lose cache locality on every hop.
Run Kahn over the condensation for the order in O(V+E). If the emitted count is short of the component count the condensation step itself is wrong, since a condensation cannot contain a cycle, which makes the check free.

Worked solution (30 min)

Write the edge-loading query with the tenant predicate on both endpoints and state what it does with a cross-tenant edge.
Implement iterative Tarjan with an explicit stack and confirm on a three-node cycle that it emits one component of size three.
Build the transpose restricted to the visited set and mark every node with an in-edge from outside it as refused, carrying the referrer id.
Run Kahn over the condensation and verify the emitted order against the referrer-before-referenced rule.
Size the CSR arrays for 2,000,000 nodes and 8,000,000 edges and compare against a boxed adjacency map.

Expected result: An iterative O(V+E) traversal over a tenant-scoped CSR subgraph, SCC condensation so cycles archive atomically as one component, a transpose-based refusal list naming the external referrer for each blocked resource, and a Kahn topological order over the condensation, with recursion replaced by an explicit stack because of graph depth rather than style.

Verify it yourself

A two-node cycle with no external referrers archives as one unit, and adding a single external referrer moves both nodes to the refusal list.
No resource appears in the archive order before something that references it, except within its own component.
A counter on edge visits matches the loaded edge count exactly, confirming each edge is traversed once.

Follow-up

The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?
An edge points at a resource in another tenant. Is that a refusal, an error, or an alert?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.
For the job case the invariant is expressible per row, so let the database hold it: a partial unique index on job_run (tenant_id, job_type) WHERE status IN ('queued','running') makes a second running export unwritable and the loser takes 23505, mapped to 409. That is strictly better than a counter — no drift, no reconciliation — and it is available only because the cap is one rather than fifty.
Add the retry discipline each route demands: under SERIALIZABLE both 40001 and deadlock 40P01 are retryable and the retry must re-execute the read, while under READ COMMITTED with the counter nothing retries, because the conflict is reported to the caller rather than raised as an error.

Worked solution (35 min)

Reproduce with two sessions that both count 49, both insert and both commit, at READ COMMITTED and then at REPEATABLE READ; record the final active count for each.
Repeat both sessions at SERIALIZABLE and record which SQLSTATE the loser receives and at which statement it is raised.
Implement the counter form and run a 20-way concurrent create against a tenant sitting at 45 active resources.
Implement the partial unique index for the job case and race 20 enqueues of the same export.

Expected result: READ COMMITTED and REPEATABLE READ both finish at 51. SERIALIZABLE finishes at 50 with one transaction aborted at 40001 — usually at commit, though SSI may raise it at an earlier statement. The counter form finishes at exactly 50: of the twenty creates, the five that take the tenant from 45 to 50 return 201 and the remaining fifteen match zero rows and return 409, with no error raised. The job index admits one running export and rejects the rest with 23505.

Verify it yourself

count(*) WHERE status='active' never exceeds the cap across 50 randomised concurrent runs.
Remove the active_resource_count < 50 predicate and the same test must start failing; if it still passes, the race is not being exercised.
At SERIALIZABLE, confirm every participating session is SERIALIZABLE — one session at a lower level and the guarantee is gone.
After each run, the counter equals the real count of active rows.

Follow-up

A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?
How do you detect after the fact that the counter drifted, without locking the table?

Find version gaps and relay lag with window functions

Medium · window functions · event tables · frame semantics

outbox_event holds event_id, aggregate_type, aggregate_id, aggregate_version, event_type, payload, status ('pending','published','dead'), attempts, created_at, published_at. A projection is missing rows and you must decide whether the relay skipped events or the consumer dropped them. Write three queries over the last seven days: one listing every aggregate_id whose published aggregate_version sequence has a hole, one giving per-day counts with a running total, and one returning the newest published event per aggregate. For each, say where the window function is evaluated relative to WHERE and LIMIT. PostgreSQL 16.

Approach

Gaps: compute lead(aggregate_version) OVER (PARTITION BY aggregate_id ORDER BY aggregate_version) in a subquery, then filter next_version <> aggregate_version + 1 in the outer query. Window functions are evaluated after WHERE, GROUP BY and HAVING and before the outer ORDER BY and LIMIT, so the predicate cannot sit in the same WHERE clause and PostgreSQL 16 has no QUALIFY.
Say what the seven-day filter does to the answer: it truncates every partition, so the first row per aggregate has no predecessor inside the window and a hole spanning the boundary is invisible. Widen the window, or join to resource.version as the authority for the true maximum.
Running total: SELECT date_trunc('day', created_at) AS d, count() AS n, sum(count()) OVER (ORDER BY date_trunc('day', created_at) ROWS UNBOUNDED PRECEDING). An aggregate inside a window call is legal because grouping runs before windowing. The grouping key is unique per row here so ROWS and RANGE agree, but write the frame anyway — over ungrouped rows with tied timestamps the default RANGE frame pulls in every peer row and the total jumps.
Newest per aggregate: DISTINCT ON (aggregate_id) ... ORDER BY aggregate_id, aggregate_version DESC is the cheap PostgreSQL-only form when an index matches that order; row_number() OVER (PARTITION BY aggregate_id ORDER BY aggregate_version DESC) = 1 is the portable form and needs a subquery for the same evaluation-order reason as the gap query.
Interpret rather than report: no gaps plus a normal p95 of published_at - created_at points at the consumer; gaps or a fat lag tail point at the relay; rows still 'pending' with attempts > 0 point at neither, because they never left the database.
Be explicit that the partial index on (created_at, event_id) WHERE status = 'pending' does not serve any of these — they read published rows. Name the index a recurring monitor would need, and say why a query run twice a year may not deserve one.

Follow-up

Relay failover redelivers events. Does a duplicate break the gap query, and how would you detect one from this table alone?
Turn the gap check into a continuous monitor rather than a query someone runs after an incident. What does it watch?
The consumer claims it never received event 4,812,006. What do you look at, in what order?

What is the difference between specific programming constructs (e.g., let vs. var in JavaScript)?

Medium

Approach

State your assumptions explicitly before working the problem.
Clarify what is being asked and what a complete answer contains.
Say what you would check first and why it is the highest-information step.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Can you explain how you would troubleshoot a 504 error?

Medium

Approach

State your assumptions explicitly before working the problem.
Clarify what is being asked and what a complete answer contains.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Design the async export contract a client can resume safely

Hard · async operations · idempotency · leases

A tenant asks for a CSV of every resource. The work runs for minutes on the worker fleet through a job_run row carrying a lease, an attempt count and a dedupe_key, far past the edge's 400 ms budget. Callers are a browser that polls and a script that walks away and checks later. Specify what the submit call returns, the operation resource and its states, how a duplicate submit is handled, how a client learns about completion, what cancellation means given that a lease can expire mid-run, and how the result is fetched and when it expires.

Approach

Split the API in two. Submit returns 202 with an operation id and a location to poll, and never blocks on the work. The operation is a real resource with its own lifecycle - queued, running, succeeded, failed, cancelled - plus attempt, a monotonic progress figure, and a terminal error drawn from the same code taxonomy the synchronous endpoints use, so a client needs one error vocabulary rather than two.
Deduplicate at submit using job_run.dedupe_key, unique over (job_type, dedupe_key) while status is 'queued' or 'running': a repeat submit of the same logical export returns 200 with the existing operation instead of 202 with a new one, and the partial index deliberately permits a legitimate re-run once the first has finished. Pair it with the request's idempotency key so an HTTP-level retry of the submit is exact rather than merely similar.
Tell the poller how to poll: Retry-After on the polling response, a minimum interval enforced at the edge, and a documented maximum lifetime after which an operation is reaped. Polling is the contract of record; the webhook is the fast path, and both must lead to the same terminal state, so a client that receives the completion event and then polls anyway sees no contradiction.
Be exact about cancellation. A cancel request records intent; it cannot stop work already executing. The handler reads the flag at checkpoints, and because a lease expires on a clock that cannot distinguish a dead worker from a slow one, a second copy may start after the cancel was recorded - so the handler re-reads the flag immediately after claiming the lease. 'cancelled' becomes terminal only when no lease is outstanding; reporting it earlier shows a client a stopped job while a worker is still writing output.
Make the handler safe to run twice, because the lease guarantees that it will be. Write output to a deterministic object key derived from the operation id so a second copy overwrites its own work instead of appending a second file, and record completion with a conditional update that only the copy holding the current lease can win.
Treat result fetch as a separate authorised read: a short-lived signed URL, the tenant checked when it is issued rather than only when the file was produced, and a documented retention after which the operation remains terminal but the bytes are gone - a state the client must be able to tell apart from a failure.

Worked solution (40 min)

Write the submit request and its two possible responses, 202 for new and 200 for a duplicate, and the dedupe_key construction.
Draw the operation state machine, marking which transitions a client may observe and which are terminal.
Write the cancellation sequence across a lease expiry, showing where the second copy reads the flag.
Define the output key, the completion update's predicate, and why both are needed for a double run.
Specify result fetch: URL lifetime, authorisation point, retention, and the distinct response once the bytes are gone.

Expected result: A 202-plus-operation contract with deduplicated submits, a documented poll interval alongside an optional completion webhook, cancellation defined as recorded intent with a terminal state gated on lease ownership, an idempotent handler writing to a deterministic key, and a separately authorised expiring result.

Verify it yourself

Submitting the same export twice while the first is running produces one job_run row and one operation id.
Killing a worker mid-export and letting the lease expire yields one output file, not two, and one terminal transition.
A client that receives the completion webhook and then polls sees the same terminal state and the same result location.

Follow-up

An operation has said 'running' for 40 minutes and the worker is gone. What does the client see, and which columns in job_run decide that?
Two tenants each submit 50 exports at once. What in this contract stops one of them delaying the other?
The customer wants the export emailed instead. What changes, and what becomes harder to make exactly-once?

One log partition stops advancing while the others drain

Easy · poison message · head-of-line blocking · consumer lag · projections

Search results for a subset of tenants are hours stale; the rest are current. The projection consumer reports lag of zero on 15 of 16 partitions and 400,000 on one. Its error rate is flat and its CPU is idle. outbox_event has no pending rows older than a second, so the relay has published everything it holds. Identify the mechanism, give the ordered checks, and state what you do in the first ten minutes versus what you change permanently.

Approach

Read the lag distribution first. A slow consumer lags everywhere; zero on fifteen partitions and 400,000 on one is not throughput. Idle CPU on the stuck partition means the consumer is not advancing its offset at all, which points at one message it cannot get past rather than at a rate problem.
Exonerate the producer before touching the consumer. No pending outbox rows older than a second means the relay published, so the event exists in the log. This separates never sent from sent and never applied, which are different code paths and usually different owners.
Read the message at the stuck offset and the handler's log lines for its event_id. A flat error rate with no progress has two explanations and you must distinguish them: the handler is throwing and the retry loop is swallowing it, or the handler is blocking on something and never returning. Idle CPU with no error lines favours the second.
Mitigate before diagnosing further. Move the offending event to a dead-letter store and commit the offset past it. Adding consumers does nothing here, because a partition is consumed by exactly one member of the group, and the blast radius is every aggregate hashed to that partition, not only the aggregate that produced the bad event.
Fix permanently by bounding handler attempts and dead-lettering on exhaustion, so no single message can stop a partition. Then replay the dead-lettered event once the handler is fixed: it carries aggregate_id and aggregate_version, so a consumer that discards versions it has already applied can absorb the replay, and resource_revision is the fallback if the event itself is unusable.

Follow-up

The dead-lettered event carried aggregate_version 7 and the projection had applied 6. What must the replay do differently if 8 and 9 landed in the meantime?
How do you show staleness to the user while the partition is behind, given the API already returns the projection's watermark?
What changes if the message is poison because a previous deploy wrote a payload shape the current code cannot parse?

Suggested practice checklist

For a candidate senior enough that the loop turns on design and judgement rather than on whether the coding round gets finished. Five days build one system properly and then stress it; coding gets a single maintenance day, on the assumption that the risk at this level is an unexamined tradeoff rather than a missed algorithm.

Day 1 — Numbers before diagrams

Build your own reference card of the figures you will re-derive all week: bytes for a realistic record, requests per second implied by a given daily active count, and the storage that a year at a given write rate produces. Derive each one rather than copying it, because the derivation is what survives a follow-up.
Turn one product statement into capacity requirements. From ten million daily users at four writes and forty reads each, state the peak-to-average factor you are assuming and why, then produce peak write QPS, peak read QPS and a year of storage.
Write the two numbers whose order of magnitude changes the design, the read-to-write ratio and the working-set size against memory per node, and state the threshold at which each one flips your answer.

Deliverable: A one-page numbers card and one worked capacity estimate with every assumption written down.

Day 2 — One system, from requirements to schema

Spend the first ten minutes producing only functional requirements, non-functional targets with numbers attached, a p99 latency, a durability expectation, a consistency requirement, and an explicit out-of-scope list.
Define the interface before the boxes: the three or four endpoints, their parameters, what each returns, and which of them are idempotent.
Write the data model, then write the single access pattern that justifies it, and state what the schema would have to become if the dominant access pattern were the other one.

Deliverable: One design carried to endpoint-and-schema depth, with non-functional targets expressed as numbers and a written out-of-scope list.

Day 3 — The consistency you are actually buying

Write out what a client sees under asynchronous replication when its write commits on the leader and its next read is served by a lagging follower, then write the two fixes, pinning that session's reads to the leader for a bounded window or carrying a version token the replica must reach, and the cost of each.
Work the quorum arithmetic on paper for N of three with W and R of two, and separate what R + W > N does guarantee, that any read set intersects any write set, from what it does not: on its own it is not linearizability, and a sloppy quorum that accepts writes on nodes outside the preference list breaks even the intersection.
Take two storage choices with different defaults, a single-leader relational store committing synchronously and a quorum-replicated store that converges eventually, and write the specific product behaviour that would be wrong under each, rather than a general statement about which is stronger.

Deliverable: A page separating what quorum overlap guarantees from what it does not, with one concrete product misbehaviour attached to each gap.

Day 4 — Failure is the design

For one write path, work through the case where the client times out after the server has already committed, then design the idempotency key: who generates it, how long it is retained, and what the duplicate request returns.
Express the retry policy as parameters rather than as a word: maximum attempts, base delay, backoff factor, jitter, and which error classes are retried at all. Then state why retrying a non-idempotent write without a key is a correctness bug and not merely waste.
Compute the fan-out effect on tail latency. If a request waits on ten backends and each independently exceeds its p99 one percent of the time, the chance at least one is slow is 1 - 0.99^10, about ten percent. Then write why independence is the optimistic assumption and what correlates them in practice.
Name the backpressure mechanism for one queue or one dependency in the design, a bounded queue with shedding or a concurrency limit, and write what the caller is told when it engages.

Deliverable: One write path with an idempotency design, a parameterised retry policy, and a written tail-latency calculation with its assumption named.

Day 5 — Scaling the hot path

Choose cache-aside or write-through for one read path and write the staleness window each produces, then name the invalidation event and what the system does when that event is lost.
Design against the stampede: either coalesce requests so only one recomputes a missing key, or refresh early with jittered expiry, and write why identical TTLs on keys populated in the same moment produce a synchronised expiry and a thundering herd.
Shard one table by a key you choose, then answer the two questions that break the choice: which queries now require a scatter-gather, and what happens to the distribution when one tenant is a hundred times larger than the median.
Write the cost of adding a node under plain modulo placement, where nearly every key moves, against consistent hashing, where roughly one key in n+1 moves, and state what virtual nodes are for.

Deliverable: A caching and sharding decision for one path, each with its failure mode and its rebalancing cost written beside it.

Day 6 — Keep the coding hand in, at the bar that applies to you

Solve one medium problem in thirty minutes, then spend twenty more making it production-shaped: named invariants, validation at the boundary, and errors that distinguish a caller mistake from an internal fault.
Write the tests you would require of a colleague's version of that function: one for empty input, one for the boundary, and one for the case the implementation is most likely to get wrong.
Read a piece of your own code from six months ago and write the change you would ask for, phrased as you would actually phrase it in review.

Deliverable: One problem hardened to review standard, with its test list and one written review comment.

Day 7 — Defend it while being interrupted

Run a forty-five-minute design mock with an interviewer briefed to change a requirement halfway, a tenfold traffic increase or a new strict consistency requirement, and to push on one number you estimated.
Rehearse the two sentences a senior loop is listening for: naming the tradeoff you are choosing against and why, and saying what you would measure to learn that the choice was wrong.
Prepare the design you regret: a real decision, the constraint that produced it, what it cost, and what you changed afterwards.

Deliverable: Mock notes recording how the design changed under the new requirement, plus a written account of one regretted decision.

'We rewrote it in a better framework' is not a story

A migration is a cost you chose to pay, not an achievement. The story is what the old system made expensive, what you measured before committing, what kept serving traffic during the cutover, and what you would have done if the numbers had come back flat. Without those, a rewrite reads as taste.

How do you handle database queries or aggregate functions?

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Name the disagreement and how you resolved it with evidence.
Give the blast radius: what could have broken, and what you measured.

Follow-up

How did you know your change caused the improvement?
What would you do differently if you ran that again?

Can you introduce yourself and describe what makes you unique as an engineer?

Medium · behavioural and engineering judgement

Approach

Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.
State the situation in two sentences and spend the rest on the reasoning.

Follow-up

How did you know your change caused the improvement?
What did you decide not to do, and why?

Reverse your own decision and price the reversal

Medium · reversibility · measurement · migrations

Describe a technical decision you made and later reversed. Pick one that cost something: a service you split and merged back, a cache you added and removed, an index you created that pushed the planner onto a worse plan, a projection you rebuilt from scratch. State what you believed when you decided, the measurement that changed your mind, how long the wrong version ran in production, and what the reversal cost in migrations, dual writes, and a deprecation window for callers you did not own.

Approach

State the original rationale without irony, in the version you would still defend given what was known then. If it is not defensible, the story is about carelessness rather than judgement, and a different example serves you better.
Give the measurement that moved with a before and after: the p99 that did not improve, the cache hit rate that sat at 40%, the plan that flipped to a sequential scan once the table passed a size you can name.
Cost the reversal in steps, not adjectives: expand-and-contract deploys, the dual-write window, the callers who had to be notified, the rows already written in the wrong shape that had to be backfilled or abandoned.
Distinguish reversal from rewrite by naming what you kept. Most good reversals preserve the schema or the interface and undo one decision inside it, which is also why they were affordable.
Finish on the process change: the smallest experiment that would have produced the same measurement in a day, and why you did not run it the first time.

Follow-up

What in that decision was irreversible, and did you know it was irreversible when you made it?
How did you tell the people who had already built on top of the original decision?
What do you now measure before committing to a change of this size?