DcubeD Software Engineer Interview Questions & Guide 2026

The 60-second brief

At DcubeD, the role of a Software Engineer is foundational to the company’s mission of revolutionizing space hardware. You are not just writing code; you are building the digital intelligence that powers sophisticated electromechanical systems, such as advanced actuators and deployable solar arrays. Your work bridges the gap between theoretical engineering and reliable, mission-critical space hardware.

The loop does not sample the job evenly, and arguing about that in the room costs you. Daily work is mostly incremental change inside code someone else wrote, while the loop samples narrow slices of it; prepare for the slices and save the realism argument for your questions at the end.

Focus areas

• Bound every outbound call with a timeout
• Detect concurrent edits instead of losing writes
• Trace a symptom to a mechanism under load

Overview

This position demands a unique blend of high-level software architecture skills and a deep appreciation for hardware constraints. As a Software Engineer here, you will contribute to products that must perform flawlessly in the unforgiving environment of space. Your impact is direct: the software you develop dictates the precision, safety, and operational success of complex space missions.

You will work within an interdisciplinary environment where software, mechanical, and electrical engineering intersect. This role is ideal for engineers who thrive on technical challenges, enjoy working close to the hardware, and want to see their code physically manifest in space-faring technology.

The DcubeD interview process

DcubeD candidates report 2 rounds · ≈ 2-4 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

The person on this call usually cannot evaluate your code and does not need to. They write a short paragraph, and that paragraph is what a hiring manager skims when deciding who to put on your loop. So the test is not whether your work was hard, it is whether a non-engineer can repeat it correctly. Name systems by what they did rather than by their internal codename, give each project a shape (what was breaking, what you changed, what happened after), and keep the whole walkthrough near ninety seconds. Depth that cannot survive a paraphrase reads as vagueness.

What to demonstrate

• Whether a non-engineer can restate your projects without distorting them, since their paraphrase is what travels to the hiring manager, not your sentences
• Whether each project has a shape rather than a stack list: the failure or constraint, the change you made, the result and how it was measured
• Whether you can say what was yours inside a team project without either inflating it or disappearing into the plural

How to prepare

• Rewrite each headline project as two sentences with no internal system names and no acronyms outside your company, then say them to someone outside engineering and have them repeat them back. Fix whatever came back wrong
• Attach one measured number to each project: the baseline, the change, and the window it was measured over. Where nothing was ever measured, say that plainly rather than reaching for a plausible percentage
• Time the background walkthrough against a clock. If it runs past two minutes, compress the earliest role to a single clause and spend the recovered time on the most recent one

Technical Evaluations

Most of the time lost in this format is not lost to thinking. It goes to a standard-library call you half-remember, an off-by-one in a loop bound, and a debugging loop that mutates code at random until something passes. When output is wrong, stop re-reading the whole function: take the smallest input that reproduces it and walk the state through by hand, printing intermediates if the environment allows. Guessing at a fix without a failing case you understand is how a five-minute bug becomes twenty, and the clock does not pause while you do it.

What to demonstrate

• Whether you reach the right structure without a detour, and can write it from memory rather than only recall that one exists
• Whether overflow is considered where the language has fixed-width integers, since a signed 32-bit value stops at 2,147,483,647 and then wraps in Java, is undefined behaviour in C++, and does not arise in Python, whose integers grow instead
• Whether recursion depth is treated as a constraint on large inputs, given that CPython's default limit is 1000 frames and a deep recursion can exhaust the stack in any language where an iterative version would not
• Whether a failing case is isolated and explained before any edit is made to the code

How to prepare

• From an empty file and with no references open, implement the pieces you lean on most: a heap push and pop, an iterative DFS with an explicit stack, and a binary search whose midpoint is written lo + (hi - lo) / 2, which avoids the overflow that (lo + hi) / 2 can hit in a fixed-width integer type
• Time yourself on the ten library calls you look up most, such as sorting with a custom comparator, splitting and joining strings, and finding the next key at or above a value in an ordered map, until the lookup is gone
• Take a solution you know is broken and, before touching it, write one sentence naming the input, the expected value and the actual value. Repeat until you do it without deciding to.

Where candidates lose points

Running a schema change as though the lock lasts as long as the statement

In PostgreSQL an ALTER TABLE that needs an ACCESS EXCLUSIVE lock must first wait for every open transaction touching that table, and while it waits, later queries needing a conflicting lock queue behind it rather than overtaking it. A DDL statement that would execute in milliseconds, issued while a thirty-second analytics query is open, therefore stalls all traffic on that table for thirty seconds: the outage length is set by the longest open transaction, not by the change. The defences are specific and worth knowing by name - set lock_timeout low and retry rather than queue, add columns without a volatile default so no table rewrite occurs (from version 11 a non-volatile default is a metadata-only change), build indexes with CREATE INDEX CONCURRENTLY while accepting that it cannot run inside a transaction block and leaves an invalid index behind if it fails, and add constraints as NOT VALID followed by a separate VALIDATE CONSTRAINT, which takes a weaker lock.

Paginating with LIMIT/OFFSET over a set that changes while the client is reading it

OFFSET n makes the database produce and discard n rows before returning anything, so the cost of a page grows with its depth rather than with its size and page 500 costs five hundred pages of work. The correctness problem is worse than the cost: if a row is inserted or reordered between two page fetches, rows shift across the offset boundary and are either skipped entirely or returned twice, and neither outcome leaves any trace in the response for the client to detect. Keyset pagination - WHERE (sort_key, id) < ($last_sort_key, $last_id) ORDER BY sort_key DESC, id DESC LIMIT n, backed by an index in exactly that order - reads only the rows it returns and is stable against concurrent inserts. It requires the tie-break column: a timestamp is not unique, and duplicate sort keys straddling a page boundary reintroduce the skip it was adopted to remove.

Assuming the bug is in the framework

Suspect your own code first: read the stack trace top to bottom, check which versions are actually installed rather than which ones you believe are, and reproduce in isolation before blaming a library that thousands of people run daily. When the fault really is upstream, you need that minimal reproduction to say so credibly anyway.

Assuming fixed-width integer arithmetic cannot overflow

In languages with fixed-width integers, including C, C++, Java, Go and Rust, computing a midpoint as (lo + hi) / 2 overflows once the sum passes the type's maximum, so write lo + (hi - lo) / 2 instead. Say which language you are in: arbitrary-precision integers, as in Python or Ruby, remove this specific hazard and none of the others.

Questions & practice

Collapse a redelivered event batch into per-aggregate high-water marks

Easy · hashing · at-least-once · aggregation

You drain a batch of up to 5,000,000 events, each (aggregate_id BIGINT, aggregate_version INT, event_type, payload). The log guarantees order within one aggregate only; the batch merges 64 partitions, and a relay failover has redelivered a range, so an older version for an aggregate can appear after a newer one. Given a map of last_applied_version per aggregate, produce the events worth applying, at most one per (aggregate_id, version), plus the count discarded. Target O(n) time. State the memory for 2,000,000 distinct aggregates and what you do when it does not fit.

Approach

1. One pass, one hash map from aggregate_id to the highest version kept, and a discard counter. An event whose version is at or below last_applied_version for its aggregate is dropped without further work, which is the whole reason the event carries its version rather than a delta. O(n) expected time, O(d) space in distinct aggregates.
2. Keep the maximum, never the last occurrence. The redelivered range means the final appearance of an aggregate in the batch can be an older version than one seen earlier in the same batch, so last-wins applies stale state over newer state and the projection regresses with no error anywhere.
3. Cost the memory instead of calling it large: an 8-byte key plus a 4-byte version is 12 bytes of payload, and an open-addressed table held at a 0.7 load factor costs roughly 17 bytes per entry before per-slot metadata, so 2,000,000 aggregates is tens of megabytes in a native layout and several times that in a runtime that boxes both key and value.
4. If the distinct set exceeds memory, partition on hash(aggregate_id) mod P and reduce each partition independently. Every event for one aggregate hashes to the same partition, so the per-partition result is exact and the merge is concatenation rather than a second reduction.
5. Reject sorting the batch by (aggregate_id, version) as the default. It is O(n log n) and buys nothing, because max is associative and commutative and needs no ordering; sorting earns its cost only when the downstream consumer must receive the events in order rather than a per-aggregate winner.
6. Separate the two mechanisms out loud: in-batch deduplication does not make the consumer idempotent, because the same event redelivered tomorrow arrives in a different batch entirely. The projection write itself still has to be keyed on (aggregate_id, version).

Follow-up

• The payload is a patch rather than a snapshot, so applying only the highest version loses the intermediate changes. What changes in your reduction?
• How do you detect that version 7 arrived while version 6 was never delivered, and what should the consumer do about the gap?
• Two events for one aggregate carry the same version with different payloads. Which one is wrong, and how would you find out?

Find overlapping job attempts and peak concurrency from lease records

Medium · sweep line · intervals · leases

A day of job_run history yields about 50,000,000 attempt records: (job_run_id, job_type, attempt, started_at, finished_at which is NULL when the worker died, lease_expires_at). Leases expire on a clock, so a job that outran its lease ran twice. Produce (a) every job_run_id whose attempts overlapped in wall-clock time and (b) the peak number of simultaneously running attempts per job_type with the minute it occurred. Target O(n log n). State how you treat a NULL finished_at and what clock skew does to your answer.

Approach

1. Define the interval before sorting anything: an attempt occupies [started_at, COALESCE(finished_at, lease_expires_at)). finished_at is observed and lease_expires_at is only a promise, so every attempt without a finish contributes an estimate and the whole result is a lower bound on overlap rather than an exact count.
2. For peak concurrency, sweep: emit 2n endpoints, sort by (timestamp, kind) with ends ordered before starts at equal timestamps, then walk the sequence maintaining a counter per job_type and record each type's maximum with its timestamp. O(n log n) dominated by the sort, O(n) space, or O(1) extra if the sort is external and the walk streams.
3. For overlap detection, do not compare attempts pairwise. A single global sort by (job_run_id, started_at) gives both the grouping and the order; within a group, keep the maximum end seen so far and report an overlap exactly when the next start is less than that running maximum, which is one linear pass after the sort.
4. Half-open intervals matter and are easy to get wrong: with closed intervals an attempt ending at the same millisecond another begins reads as concurrency two, and across 50,000,000 records that artefact swamps the real signal.
5. State the clock caveat: started_at and finished_at are written by different workers, so under skew of a few hundred milliseconds an apparent overlap shorter than that bound is not evidence. Filter reported overlaps by a minimum duration, or prefer timestamps written by whichever component heartbeats the lease.
6. Scale the sort rather than assuming it fits: the sweep emits two endpoints per attempt, so 50,000,000 records become 100,000,000 endpoints, and at roughly 24 bytes each, an 8-byte timestamp plus a 4-byte job_type plus a kind flag padded to alignment, that is about 2.4 GB of sort keys before any scratch space. Either push the ordering into the database behind an index on (job_type, started_at) or run an external merge sort in chunks; the overlap pass sorts n records rather than 2n, so it is the cheaper of the two.

Follow-up

• A handler is not idempotent and you have found 400 overlapping jobs. Which of them actually caused damage, and what would you query to find out?
• Peak concurrency for one job_type is 4 against a configured cap of 4. Is the cap working, or is the data hiding attempts that never started?
• How would you compute both answers incrementally as records arrive rather than in a daily batch?

Archive a resource graph without breaking live references or recursing

Medium · graph traversal · topological order · tenant isolation

Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.

Approach

1. Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
2. Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
3. Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
4. Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.
5. Store the graph as CSR rather than a map of lists: an offsets array of V+1 8-byte entries plus E 8-byte targets is about 80 MB at this size, where boxed adjacency lists cost several times that and lose cache locality on every hop.
6. Run Kahn over the condensation for the order in O(V+E). If the emitted count is short of the component count the condensation step itself is wrong, since a condensation cannot contain a cycle, which makes the check free.

Worked solution (30 min)

1. Write the edge-loading query with the tenant predicate on both endpoints and state what it does with a cross-tenant edge.
2. Implement iterative Tarjan with an explicit stack and confirm on a three-node cycle that it emits one component of size three.
3. Build the transpose restricted to the visited set and mark every node with an in-edge from outside it as refused, carrying the referrer id.
4. Run Kahn over the condensation and verify the emitted order against the referrer-before-referenced rule.
5. Size the CSR arrays for 2,000,000 nodes and 8,000,000 edges and compare against a boxed adjacency map.

Expected result: An iterative O(V+E) traversal over a tenant-scoped CSR subgraph, SCC condensation so cycles archive atomically as one component, a transpose-based refusal list naming the external referrer for each blocked resource, and a Kahn topological order over the condensation, with recursion replaced by an explicit stack because of graph depth rather than style.

Verify it yourself

• A two-node cycle with no external referrers archives as one unit, and adding a single external referrer moves both nodes to the refusal list.
• No resource appears in the archive order before something that references it, except within its own component.
• A counter on edge visits matches the loaded edge count exactly, confirming each edge is traversed once.

Follow-up

• The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
• The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?
• An edge points at a resource in another tenant. Is that a refusal, an error, or an alert?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

1. One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
2. Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
3. State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
4. Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.
5. Refuse to auto-retry the whole PUT. A retry re-reads the winner's state and reapplies an intent formed against data that no longer exists — the silent overwrite the version token was added to detect. Return the conflict; merge field-wise only if the patches are provably disjoint.
6. Note that now() is the transaction timestamp in PostgreSQL, so resource.updated_at, the revision's created_at and the outbox row share one instant, which is what later makes reconciliation between the three tables unambiguous.

Worked solution (25 min)

1. Write the three statements plus the rowcount branch and confirm they sit in one BEGIN/COMMIT with no outbound call between them.
2. Run two clients that both read version 7 and apply their updates 5 ms apart; assert one 200 and one 409.
3. Assert resource.version = 8, exactly one resource_revision row at version 8, and one outbox_event row at aggregate_version 8.
4. Repeat at REPEATABLE READ and record the different failure shape (SQLSTATE 40001) the handler must also map to 409.
5. Delete the version predicate and re-run: both writes commit and the first edit disappears with no error raised anywhere.

Expected result: Exactly one of the two commits. version = 8 with one revision row and one outbox row at version 8, the loser gets 409 carrying version 8, and no state exists in which the resource moved but the revision or the outbox row is missing.

Verify it yourself

• COUNT(*) of resource_revision for that resource equals resource.version, with no gap in the version sequence.
• Kill the process between the UPDATE and the outbox INSERT — the transaction rolls back and no event describes a change that never happened.
• Under a 50-way race, resource.version equals the number of 2xx responses rather than the number of requests.

Follow-up

• A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
• Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?
• Every write now touches a second hot table. How do you keep the outbox insert and its partial index from becoming the write bottleneck at 1.2k writes/second?

Find version gaps and relay lag with window functions

Medium · window functions · event tables · frame semantics

outbox_event holds event_id, aggregate_type, aggregate_id, aggregate_version, event_type, payload, status ('pending','published','dead'), attempts, created_at, published_at. A projection is missing rows and you must decide whether the relay skipped events or the consumer dropped them. Write three queries over the last seven days: one listing every aggregate_id whose published aggregate_version sequence has a hole, one giving per-day counts with a running total, and one returning the newest published event per aggregate. For each, say where the window function is evaluated relative to WHERE and LIMIT. PostgreSQL 16.

Approach

1. Gaps: compute lead(aggregate_version) OVER (PARTITION BY aggregate_id ORDER BY aggregate_version) in a subquery, then filter next_version <> aggregate_version + 1 in the outer query. Window functions are evaluated after WHERE, GROUP BY and HAVING and before the outer ORDER BY and LIMIT, so the predicate cannot sit in the same WHERE clause and PostgreSQL 16 has no QUALIFY.
2. Say what the seven-day filter does to the answer: it truncates every partition, so the first row per aggregate has no predecessor inside the window and a hole spanning the boundary is invisible. Widen the window, or join to resource.version as the authority for the true maximum.
3. Running total: SELECT date_trunc('day', created_at) AS d, count() AS n, sum(count()) OVER (ORDER BY date_trunc('day', created_at) ROWS UNBOUNDED PRECEDING). An aggregate inside a window call is legal because grouping runs before windowing. The grouping key is unique per row here so ROWS and RANGE agree, but write the frame anyway — over ungrouped rows with tied timestamps the default RANGE frame pulls in every peer row and the total jumps.
4. Newest per aggregate: DISTINCT ON (aggregate_id) ... ORDER BY aggregate_id, aggregate_version DESC is the cheap PostgreSQL-only form when an index matches that order; row_number() OVER (PARTITION BY aggregate_id ORDER BY aggregate_version DESC) = 1 is the portable form and needs a subquery for the same evaluation-order reason as the gap query.
5. Interpret rather than report: no gaps plus a normal p95 of published_at - created_at points at the consumer; gaps or a fat lag tail point at the relay; rows still 'pending' with attempts > 0 point at neither, because they never left the database.
6. Be explicit that the partial index on (created_at, event_id) WHERE status = 'pending' does not serve any of these — they read published rows. Name the index a recurring monitor would need, and say why a query run twice a year may not deserve one.

Follow-up

• Relay failover redelivers events. Does a duplicate break the gap query, and how would you detect one from this table alone?
• Turn the gap check into a continuous monitor rather than a query someone runs after an incident. What does it watch?
• The consumer claims it never received event 4,812,006. What do you look at, in what order?

Walk me through the design of a control loop for a high-precision actuator.

Medium · system design and architecture

Approach

1. State the consistency you need, and where you are willing to be stale.
2. Choose a partition key and say what query it makes expensive.
3. Name the failure you are designing for, then the recovery path.

Follow-up

• What would you drop to keep the system up under load?
• How does this behave when that dependency is down for an hour?

How would you architect a system to handle sensor data input with low latency?

Medium · system design and architecture

Approach

1. Name the failure you are designing for, then the recovery path.
2. Fix the scope first: who calls this, how often, and what they do when it fails.
3. Name the read and write paths separately; they rarely have the same bottleneck.

Follow-up

• How does this behave when that dependency is down for an hour?
• What breaks first when traffic grows ten times?

How do you approach unit testing for hardware-dependent software modules?

Medium

Approach

1. Clarify what is being asked and what a complete answer contains.
2. Work from the requirement backwards to the design.
3. State your assumptions explicitly before working the problem.

Follow-up

• How would you know your answer was wrong?
• What assumption would you test first?

How do you manage memory and performance constraints in resource-limited environments?

Medium

Approach

1. Work from the requirement backwards to the design.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

Cache the tenant listing feed with a bounded staleness window

Easy · caching · cache invalidation · keyset pagination

GET /v1/resources returns one tenant's resources ordered by updated_at DESC, 20 per page, at 14k requests/second peak against a 120 ms p99. The table carries the index (tenant_id, status, updated_at DESC, resource_id DESC) and writes land on the primary at 1.2k/second. Design the read path: the pagination contract, the cache key and value, what a write invalidates, and the staleness a user can observe. State the request rate that actually reaches the database, and the one repopulation race that deleting on write does not close.

Approach

1. Settle the pagination contract first, because it decides what is cacheable. OFFSET makes the database produce and discard the skipped rows, so page 500 costs five hundred pages of work, and rows inserted between two fetches shift across the boundary and are skipped or repeated with nothing in the response to reveal it. The cursor is the row value of the last row returned: WHERE tenant_id = $1 AND status = $2 AND (updated_at, resource_id) < ($3, $4) ORDER BY updated_at DESC, resource_id DESC LIMIT 21. That is a row-value comparison, not updated_at < $3 AND resource_id < $4, which is a different and wrong predicate.
2. Confirm the index actually serves it: equality on the two leading columns, then a range on the pair that follows in exactly the index's sort order, so the plan is an index scan that touches 21 entries with no sort node. Requesting 21 to return 20 is how has_more is answered without a count. resource_id is not decoration - updated_at is not unique, and without the tie-break two rows sharing a timestamp at a page boundary are the skip that keyset pagination was adopted to remove.
3. Key the cache on every value the predicate reads: tenant_id, status, cursor and page size. A key that omits tenant_id is a cross-tenant disclosure, and no test running against a single tenant's data will show it.
4. Be honest that a write does not invalidate one key. An update moves its row to the head of the ordering, so it invalidates the first page and every cursor page whose range spans the row's old and new position, which is not enumerable. Cache the first page per (tenant_id, status) - that is where the traffic is - with a short TTL, invalidate it on write, and serve deep cursor pages uncached from a replica, since each is already a 21-row index scan and they are rare.
5. Name the residual race and the real bound. A reader that loaded rows before the write can populate the cache after the invalidation deleted the key, so the delete is not a staleness bound; the TTL is. Choose the TTL as the staleness a listing can tolerate, and jitter expiries so a busy tenant's keys do not all expire together and stampede the replica. Then do the arithmetic: at an 85% hit rate, 14k requests/second is about 2.1k database reads/second across two replicas, and that is the number capacity planning uses.

Worked solution (20 min)

1. Write the keyset predicate and match it column by column against the index, marking which columns are equality, which is the range, and which satisfies the ORDER BY.
2. Compare rows examined for page 1 and page 500 under OFFSET and under keyset, and state both numbers.
3. Write the cache key template and the first-page invalidation the write path performs.
4. Write the interleaving in which a stale value is written into the cache after the invalidation, and identify what bounds it.

Expected result: Keyset pagination on the row value (updated_at, resource_id) served as a 21-entry index scan with no sort at any page depth. The first page per (tenant_id, status) is cached under a short jittered TTL and deleted on write; deeper cursor pages go to a replica uncached. Observable staleness is the TTL, not the invalidation, because a concurrent reader can repopulate the key afterwards. At an 85% hit rate roughly 2.1k reads/second reach the two replicas.

Verify it yourself

• The query plan shows an index scan with no Sort node, and rows examined equal to the limit, at page 1 and at page 500.
• Two rows sharing an updated_at value across a page boundary are returned exactly once across the two pages.
• Every cache key contains tenant_id.
• Removing the TTL leaves staleness unbounded even though every write still invalidates.

Follow-up

• The tenant writes and immediately lists. What does it see, and what is the smallest change that makes its own write visible without sending all 14k requests/second to the primary?
• A tenant has 4 million resources and a client walks every page nightly. What does that do to the cache hit rate, and should that traffic share this path at all?
• Sort order becomes configurable - by title, by created_at. What happens to the index set and to the cache key space?

Listing latency scales with page size, not with filters

Easy · n+1 · latency · query batching

The tenant listing endpoint reads resource filtered by tenant_id and status, ordered by updated_at DESC, and returns each row plus the owner's display name from app_user and the actor of that resource's latest resource_revision. p99 is 55 ms at 10 rows per page and 1.4 s at 200. Database telemetry shows 401 statements per request, each under 1 ms, and nothing in the slow-query log. Diagnose the cause and give the fix, stating the statement count per request and the p99 you expect afterwards.

Approach

1. Read the counters before forming a theory. 401 statements for 200 rows is one driver query plus two per row, and sub-millisecond execution with an empty slow-query log rules out a bad plan. The time is round trips, which is why it is invisible in every per-query metric and scales with rows returned rather than with filter selectivity.
2. Name the two per-row statements from their normalised text: a single-row app_user lookup by user_id, and a resource_revision lookup by resource_id ordered by version DESC LIMIT 1. Confirm by dropping those two response fields and watching the statement count fall to one. That locates the calls in the serialisation layer, not the repository.
3. Check that the arithmetic accounts for the whole gap. Measure one round trip to the replica in isolation; 400 trips at roughly 3 ms of network plus 0.2 ms of execution is about 1.3 s on top of a 55 ms baseline, which matches. If the multiplication had fallen short, the N+1 would only be part of the story and you would keep looking.
4. Batch both lookups. Collect owner_user_ids and resource_ids from the driver query, then issue WHERE tenant_id = $1 AND user_id = ANY($2) for the users, and PostgreSQL's SELECT DISTINCT ON (resource_id) ... WHERE resource_id = ANY($2) ORDER BY resource_id, version DESC for the latest revision, which the UNIQUE (resource_id, version) index serves directly. On an engine without DISTINCT ON, use a lateral join or a row_number window. Three statements per request at any page size.
5. Keep the tenant predicate in the batched query. The per-row version was implicitly scoped because its ids came from tenant-scoped rows; a batched user_id = ANY(...) with no tenant_id is an unscoped read that behaves correctly only as long as the id list is trustworthy.
6. Re-measure at 10, 50 and 200 rows and confirm the statement count is constant. Latency should now track bytes returned.

Follow-up

• The page size is capped at 200 today. What breaks first if it is raised to 2,000, and is it still this bug?
• How do you stop the next N+1 from reaching production, given that no individual query is slow and the endpoint's tests pass?
• The latest-revision actor is only used to render an avatar. Make the case for denormalising it onto resource, and name the write anomaly that introduces.

Suggested practice checklist

For someone who has spent the last few years shipping features and reading other people's code, and who has not solved a timed problem from a blank file in a long time. Five days rebuild the primitives and the patterns that sit on them, working from invariants rather than remembered solutions, and the last two attach that back to the rest of the loop.

Day 1 — Rebuild the primitives by implementing them

• Implement a dynamic array with doubling growth and an operation counter, then change the growth rule to add a fixed sixteen slots instead, and time both for n of ten thousand, a hundred thousand and a million. The fixed-increment version resizes n/16 times at O(n) each, so its total work is quadratic; doubling is what makes append amortised constant.
• Implement a hash map with separate chaining and a load-factor resize, then insert ten thousand keys engineered to land in one bucket and record what happens to lookup time, so that average-case O(1) becomes a claim with a stated precondition rather than a reflex.
• For dynamic-array append and hash-map insert, write down which cost is amortised rather than worst-case, which single operation pays the whole bill, and what a system with a hard per-operation deadline would have to do instead.

Deliverable: Two working implementations plus a timing table showing the input at which each structure's advertised complexity stops holding.

Day 2 — Arrays under an invariant: two pointers, sliding window, binary search

• Solve longest-subarray-with-sum-at-most-K using a sliding window, then run it on an input containing negative numbers and watch it return the wrong answer: extending the window only moves the sum monotonically when every element is non-negative, and that precondition is the whole reason the technique works.
• Write the binary search that finds the first index satisfying a predicate rather than an exact value, put the loop invariant above the loop in a comment, and verify termination on the two inputs that break careless versions: the empty range, and a range where every element satisfies the predicate.
• Compute the midpoint as lo + (hi - lo) / 2 and write one line on why the obvious (lo + hi) / 2 is a genuine defect in a fixed-width integer type and a non-issue in a language with arbitrary-precision integers.

Deliverable: Three solved problems, each with its invariant written above the loop, plus one recorded input on which the sliding window is provably wrong.

Day 3 — Sorting, heaps, and the greedy argument that has to be proved

• Solve one top-k problem three ways, by full sort, by a size-k heap, and by quickselect, then write the values of n and k at which each becomes the right choice, along with quickselect's quadratic worst case and why a randomised pivot makes that unlikely rather than impossible.
• Implement bottom-up heapify and count sift-down steps to confirm it does linear work rather than n log n, because most nodes sit near the bottom of the tree and therefore move only a short distance.
• Take interval scheduling by earliest finishing time and write the exchange argument out in full: given any optimal schedule, swapping in the earliest-finishing interval keeps it feasible and no smaller. Then construct the weighted variant where that same greedy fails and name what has to replace it.

Deliverable: A three-way top-k comparison with measured crossover points, one written exchange argument, and one counterexample to a greedy rule that looks almost identical.

Day 4 — Recursion, memoisation, and the step to a table

• Take one problem with overlapping subproblems, such as edit distance or coin change, instrument the plain recursion with a call counter to show the blow-up, then add memoisation and re-count.
• Convert the memoised version to a bottom-up table and state the two properties you relied on: each subproblem's result depends only on its arguments, and the dependencies form a DAG you can enumerate in order.
• Rewrite one deep recursion with an explicit stack, then find the input length at which the original hits the interpreter's frame limit, which defaults to about a thousand frames in CPython, so you know when the rewrite is required rather than decorative.

Deliverable: One problem in three forms, naive, memoised and tabulated, with call counts for each and the input length at which recursion depth becomes the binding constraint.

Day 5 — Graphs, where most of the work is choosing the traversal

• Implement BFS and DFS over one adjacency list, then answer for each which finds a shortest path in an unweighted graph and which you would use to detect a cycle in a directed graph, including why the in-progress versus finished distinction matters for the second.
• Implement topological sort by in-degree, feed it a graph containing a cycle, and confirm the failure signature is that fewer than V nodes come out rather than an exception, then note that the order it produces is one of several valid ones.
• Run a shortest-path search on a graph with a single negative edge weight and show the wrong answer, then write the precondition Dijkstra actually needs, non-negative weights, because it finalises a node's distance the first time that node is popped, and name the algorithm you would switch to and its own limit.

Deliverable: A small graph library with BFS, DFS and topological sort, plus two inputs that produce documented wrong answers under the wrong algorithm choice.

Day 6 — One day for everything that is not an algorithm

• Sketch one system only to the depth a coding-heavy loop tends to reach: the endpoints, what the service stores, and the single query pattern that decides the schema. Stop at twenty-five minutes.
• Prepare the project answer for an interviewer who codes, which means rehearsing the two levels they push to: the specific thing you built, and why you chose that approach over the alternative they will name. Open with a number and be ready to say what it excludes.
• Prepare the answer to what you would do differently, choosing a real technical mistake with a specific fix rather than a complaint about process or staffing.

Deliverable: One design sketch at endpoint-and-schema depth, plus a project answer rehearsed to two levels of follow-up.

Day 7 — Solve out loud, under time

• Do three timed problems at twenty-five minutes each in a plain editor with no autocomplete and no execution until the end, then tally separately the failures that were syntax and the ones that were approach, because those two numbers call for different fixes.
• Narrate one solution from the first sentence, stating the approach and its complexity before writing any code, and rehearse the sentence you will use when you realise mid-solution that the approach is wrong.
• Re-solve from blank the two problems you were slowest on this week and compare the times against the day they first appeared.

Deliverable: A recording of one fully narrated solution and a tally that separates syntax failures from approach failures.

The bug you decided not to fix

Engineers over-index on what they repaired. A stronger answer covers something you knowingly left broken: the alert you tuned down, the data inconsistency you documented instead of chasing, the cleanup you deferred past two quarters. Give the reasoning and the condition that would have reopened it, so it reads as a decision and not as neglect.

How do you handle hardware failures within your software logic?

Medium · behavioural and engineering judgement

Approach

1. State the situation in two sentences and spend the rest on the reasoning.
2. Name the disagreement and how you resolved it with evidence.
3. Pick a story where you made the decision, not one where you watched it.

Follow-up

• What did you decide not to do, and why?
• What would you do differently if you ran that again?

Tell me about a time you had to collaborate with a mechanical engineer to resolve a design conflict.

Medium · behavioural and engineering judgement

Approach

1. State the situation in two sentences and spend the rest on the reasoning.
2. Give the blast radius: what could have broken, and what you measured.
3. Name the disagreement and how you resolved it with evidence.

Follow-up

• What did you decide not to do, and why?
• What would you do differently if you ran that again?

Describe a situation where you had to learn a new technology or tool quickly to solve a critical problem.

Medium · behavioural and engineering judgement

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?