Interview guides · Cisco Restaurant + Bar

Cisco Restaurant + Bar Data Scientist Interview Questions & Guide 2026

Cisco Restaurant + Bar data scientist prep on data pitfalls: selection bias, target leakage, and checking an outlier's provenance before you drop it.

The 60-second brief

As a Data Scientist at Cisco Restaurant + Bar, you are at the intersection of hospitality operations and advanced analytical modeling. Your role is critical to transforming raw transactional and operational data into actionable insights that drive efficiency, improve customer satisfaction, and optimize menu performance. You will be responsible for building predictive models that influence how the business scales and responds to market fluctuations.

Most of the loop measures decision-making under uncertainty rather than recall. You are scored on whether you state your assumptions, commit to an estimate you can defend, and say explicitly what evidence would change it.

Focus areas

Decompose a metric move by segment and mix
Pick a randomisation unit that respects interference
Turn a vague request into a measurable question

Overview

This position is inherently strategic. You will work closely with stakeholders to identify pain points within the restaurant ecosystem, moving beyond simple reporting to deliver high-impact solutions. Whether it is forecasting demand, optimizing inventory, or analyzing consumer behavior, your work directly impacts the bottom line. You can expect a high-paced environment where your technical proficiency in Python and Machine Learning is directly applied to real-world, tangible business problems.

While the hiring process is known to be thorough, it is also described by past candidates as fair and interactive. Focus on demonstrating how your technical skills translate into business value.

Where to focus your preparation

Treat the sections below as preparation areas and confirm the format with your recruiter.

Preparation focus

No round sequence has been reported for this company, so work the categories below and confirm the format with your recruiter.

What to demonstrate

Breadth across SQL, experimentation and product reasoning
Ability to state assumptions before choosing a method

How to prepare

Drill the practice exercises below and time yourself
Prepare three quantified stories about decisions you drove

Where candidates lose points

Comparing cohort retention curves of different maturities, or building the curve from users who are still present

A cohort four weeks old has no week-8 value, so an average taken across cohorts silently drops young cohorts from the later columns and keeps them in the earlier ones. The curve then bends upward at the tail, and the reading that 'retention is improving over time' is an artefact of which cohorts survived to be measured. The same error appears in the denominator when retention is computed over users active in the current period rather than over the full original cohort, which conditions on survival and guarantees a flattering number. The fix is a triangle: fix the cohort at signup, bound every window on both sides, and only compare cells where every cohort has had the full elapsed time, publishing the rest as blank rather than as a partial average.

Watching an experiment daily and stopping when it crosses significance

A fixed-sample test controls type I error at one pre-declared look. Checking repeatedly and stopping at the first p < 0.05 inflates the false positive rate to roughly 0.15 to 0.20 for ten looks, and it rises further with more frequent checks, because the p-value takes a random walk that will eventually dip below the threshold under the null. The usual defences are a fixed horizon declared before launch, group-sequential boundaries such as O'Brien-Fleming that spend alpha across a planned number of looks, or always-valid confidence sequences that are correct under continuous monitoring. Compounding it, the effect size reported conditional on having crossed the threshold is biased away from zero, and the bias is larger the lower the power was, so an underpowered test that 'won' typically overstates the lift it found.

Writing SQL without stating NULL and tie-breaking behaviour

Before calling a query finished, say what it does with NULLs, ties and empty groups. NOT IN against a subquery containing a single NULL returns no rows at all, and RANK, DENSE_RANK and ROW_NUMBER differ precisely on ties, so name which one the question requires.

Generalising beyond the population the sample actually supports

State the frame the sample was drawn from and where it diverges from the population you want to talk about: time window, platform, geography, opt-in. If a group is excluded from the frame, either weight to known margins or narrow the claim rather than quietly extending it.

Questions & practice

How do you approach feature engineering for a predictive model?

Medium · machine learning and modelling

Approach

Check what information would not exist at prediction time, and exclude it.
Frame the prediction: the label, the moment of prediction, and the action it triggers.
Say how the offline result would be validated online before it is trusted.

Follow-up

What would you monitor after launch to know the model is still valid?
How would you choose the decision threshold, and who owns that choice?

Explain the trade-offs between different classification or regression algorithms.

Medium · machine learning and modelling

Approach

Pick an evaluation metric that matches the cost of each error type, not a default.
Check what information would not exist at prediction time, and exclude it.
Frame the prediction: the label, the moment of prediction, and the action it triggers.

Follow-up

Where could label leakage enter this setup?
How would you choose the decision threshold, and who owns that choice?

Which Machine Learning frameworks are you most comfortable using in a production environment?

Medium · machine learning and modelling

Approach

Say how the offline result would be validated online before it is trusted.
Frame the prediction: the label, the moment of prediction, and the action it triggers.
Set a baseline first, so any model has something honest to beat.

Follow-up

How would you choose the decision threshold, and who owns that choice?
What would you monitor after launch to know the model is still valid?

Sessionise an event stream with gap and midnight rules

Hard · sessionisation · vectorisation · event streams

Sessionise a raw event stream. Input: a DataFrame with visitor_id, user_id (often NULL), occurred_at_utc and event_name, unsorted, up to 5 million rows. A session breaks when the gap from that visitor's previous event exceeds 30 minutes, and is force-closed at UTC midnight so no session spans two calendar dates. A gap of exactly 30 minutes does not break. Emit one row per session with session_id, visitor_id, the user_id as of the last event in the session, started_at_utc, ended_at_utc, session_date, duration_seconds and event_count. Vectorise; do not loop per visitor.

Approach

Sort by ['visitor_id', 'occurred_at_utc', 'event_id'] once, then express the whole problem as one boolean vector: a row starts a new session when the visitor changed, or the gap exceeds 30 minutes, or the UTC date differs from the previous row's UTC date. Cumsum that vector and you have the session key.
Get the comparison direction right on the gap: the rule is strictly greater than 1800 seconds, so an event at exactly 1800 seconds continues the session. Write it as gap > pd.Timedelta(minutes=30), and make the tie a test case rather than an assumption.
Derive the midnight break from the date change, not from inserting synthetic boundary rows. A date change implies a break even when the gap is two seconds, which is precisely the force-close rule and is why the two conditions are ORed rather than one subsuming the other.
Aggregate with a single groupby on the session key: min and max of occurred_at_utc, size for event_count, and last for user_id, which is correct because the frame is already sorted so 'last' is the final event in the session. That is the identity-as-of-session-end rule.
Compute duration_seconds as (max - min).dt.total_seconds(), which makes a single-event session 0 seconds. Say so explicitly, because a downstream mean session duration is sensitive to whether single-event sessions are 0 or excluded.

Worked solution (35 min)

df = df.sort_values(['visitor_id','occurred_at_utc','event_id']).reset_index(drop=True).
new_visitor = df.visitor_id.ne(df.visitor_id.shift()); gap = df.occurred_at_utc.diff(); new_day = df.occurred_at_utc.dt.date.ne(df.occurred_at_utc.dt.date.shift()).
is_start = new_visitor | (gap > Timedelta(minutes=30)) | new_day; df['session_key'] = is_start.cumsum().
g = df.groupby('session_key'); out = g.agg(visitor_id=('visitor_id','first'), user_id=('user_id','last'), started_at_utc=('occurred_at_utc','min'), ended_at_utc=('occurred_at_utc','max'), event_count=('event_id','size')).
out['session_date'] = out.started_at_utc.dt.date; out['duration_seconds'] = (out.ended_at_utc - out.started_at_utc).dt.total_seconds(); assign session_id from the sorted index.

Expected result: One row per session where session_count equals is_start.sum(), event_count sums exactly to len(input), every session's started_at and ended_at share one UTC date, and duration_seconds is at least 0 and strictly less than 86400.

Verify it yourself

out['event_count'].sum() equals len(df); a mismatch means rows were lost to a join or a dropna.
started_at_utc.dt.date equals ended_at_utc.dt.date on every row.
For a planted visitor with events at 12:00:00 and 12:30:00 exactly, one session is emitted; move the second to 12:30:01 and two are emitted.
For a planted visitor with events at 23:59:50 and 00:00:10, two sessions are emitted on consecutive dates despite a 20-second gap.

Follow-up

Sessions are used as the denominator of a conversion rate. How does moving the inactivity gap from 30 to 45 minutes move that rate, and in which direction?
A visitor's clock is 40 minutes ahead, so their events arrive with future occurred_at values. What does your sessioniser do, and what would you rather it did?
The same person signs up mid-session on mobile and continues on desktop. How many sessions and how many users does your output show, and is that the right answer?

Pair flow starts to completions within a thirty-minute bound

Medium · event-streams · conditional-aggregation · flow-funnel

fct_event holds event_id, flow_id, flow_instance_id, event_name, occurred_at_utc, surface, app_version. Using only rows where event_name is 'flow_started', 'flow_completed' or 'error_shown', compute the daily core-flow completion rate by surface and app_version. Numerator: distinct flow_instance_id whose flow_completed occurs within 30 minutes of its flow_started with no error_shown for the same instance in between. Denominator: distinct flow_instance_id with a flow_started that day. Report rows with a NULL flow_instance_id as a separate coverage count, not inside either side.

Approach

Collapse the stream to one row per flow_instance_id using conditional aggregation: MIN(occurred_at_utc) FILTER (WHERE event_name = 'flow_started') AS started, MIN(...) FILTER (WHERE event_name = 'flow_completed') AS completed, MIN(...) FILTER (WHERE event_name = 'error_shown') AS first_error. This makes the 'first' semantics explicit and avoids a self-join entirely.
Apply the predicates on that single row: completed IS NOT NULL AND completed <= started + interval '30 minutes' AND (first_error IS NULL OR first_error > completed). Note the last clause encodes 'in between' literally, so an error surfaced after a successful completion does not disqualify the attempt.
Bucket by started::date, surface and app_version. Splitting by app_version is not decoration: a completion-rate regression is nearly always confined to one client build, and a pooled daily rate hides it behind the installed base.
Count NULL flow_instance_id rows as a separate coverage figure. They cannot be attributed to an attempt at all, so they belong in neither numerator nor denominator, and their share tells you how much of the rate is unmeasurable.
For any roll-up to week or to all surfaces, re-sum the numerator and denominator rather than averaging the daily rates.

Worked solution (25 min)

Write the per-instance collapse CTE and confirm COUNT(*) equals COUNT(DISTINCT flow_instance_id).
Add the three predicates one at a time, recording how many instances each removes.
Aggregate by day, surface and app_version with FILTER on the clean-completion flag.
Compute the NULL-instance coverage count as a separate select and report it alongside.
Pick the worst day-surface-version cell and pull ten raw instances to confirm the disqualification reason.

Expected result: One row per (day, surface, app_version) with started, completed_clean and a rate bounded by 0 and 1, plus a scalar coverage count of events carrying a NULL flow_instance_id. Instances completing after 30 minutes appear in the denominator only.

Verify it yourself

No rate exceeds 1.
COUNT(*) equals COUNT(DISTINCT flow_instance_id) in the collapsed CTE.
Total started across cells equals the count of distinct flow_instance_id values carrying a flow_started event in the window.
Instances with an error strictly between start and completion are excluded from the numerator but present in the denominator.

Follow-up

occurred_at_utc is client-supplied. What do you do with an instance whose completion timestamp precedes its start?
flow_instance_id is missing on 4 percent of starts for one app_version. What can and cannot you conclude about that build?
An instance starts at 23:55 and completes at 00:04. Which day owns it, and what does the alternative do to the daily series?

Weekly visit-to-signup conversion split by acquisition channel

Easy · funnel · conversion · aggregation

From fct_session (session_id, visitor_id, started_at_utc, referrer_channel, is_bot_flagged, consent_state) and fct_event (visitor_id, occurred_at_utc, event_name), compute visit-to-signup conversion for one ISO week, split by channel. session_id is the unique key of fct_session. Denominator: distinct visitor_id with a session starting in the week, is_bot_flagged = FALSE and consent_state <> 'denied'. Numerator: those visitors with a 'signup_completed' event in the same week. Label each visitor with the referrer_channel of their first session in the window. Return channel, visitors, signups and rate, plus one all-channel total row.

Approach

Build a visitor spine that is one row per visitor: filter sessions to the week, drop is_bot_flagged and consent_state = 'denied', then take the first session per visitor with ROW_NUMBER() OVER (PARTITION BY visitor_id ORDER BY started_at_utc, session_id) = 1 to carry the channel label. Collapsing to one row here is what makes the channel buckets mutually exclusive and the totals additive.
session_id is the unique key, so that ordering is total and the label is reproducible. If the table carried no unique key you would have to write an explicit tie rule instead, because two sessions on different channels at the identical timestamp would otherwise label the visitor differently between runs.
Attach the outcome as a semi-join (EXISTS on a signup_completed event for that visitor inside the same week) rather than a join to the event table, so a visitor who fires the event twice does not count twice and inflate the numerator past the denominator.
Aggregate with COUNT() as visitors and COUNT() FILTER (WHERE signed_up) as signups, and compute the rate as signups::numeric / NULLIF(visitors, 0) so an empty channel returns NULL rather than a division error.
Produce the total with GROUP BY GROUPING SETS ((channel), ()), which re-sums numerator and denominator for the total row. Averaging the channel rates gives a different and wrong number whenever channel volumes differ, which they always do.
Verify the spine before trusting the output: COUNT(*) must equal COUNT(DISTINCT visitor_id), and the per-channel visitor counts must sum to the total row.

Follow-up

The denominator is distinct visitors. If a browser release shortens cookie lifetime, what happens to this rate, and how would you tell that apart from a genuine drop?
A visitor's first session is direct and their signup session is paid search. Your label says direct. When is that the wrong answer for the decision being made?
How do you roll four weeks into a month, and why is averaging the four weekly rates wrong?

Randomise a shared workspace feature without contaminating control

Medium · randomisation unit · interference · design effect · clustering

A feature changes a collaborative surface inside a workspace: when one member uses it, other members of the same account see the result in their own view. You have dim_user (user_id, account_id, is_internal), dim_account (account_id, seats_assigned, lifecycle_status) and fct_event. Among active accounts the mean seats_assigned is 6, the coefficient of variation of that count is 1.5, and the intraclass correlation of the weekly core-action rate within an account is 0.10. Choose the randomisation unit, quantify what that choice costs in sample, and specify how you would compute inference.

Approach

State the interference before choosing anything: a treated user changes what an untreated colleague sees, so user-level randomisation puts both arms inside one account and biases the contrast toward zero. Randomise on account_id.
Price the clustering properly. With equal clusters the design effect is 1 + (m - 1) rho = 1 + 5(0.10) = 1.5. Sizes here are far from equal, so use 1 + ((CV^2 + 1) m - 1) rho = 1 + (3.25 x 6 - 1)(0.10) = 2.85. The equal-size shortcut understates the cost by nearly half.
Decide the estimand before the estimator. An account-weighted mean gives every workspace one vote; a user-weighted mean lets the largest workspaces dominate. With this size skew the two can move in opposite directions, so pick the one the decision needs and write it down.
Compute standard errors on the account, not the user: cluster-robust on account_id, or collapse each account to a single number and test those. Below roughly 40 clusters per arm, cluster-robust errors are biased downward, so use a wild cluster bootstrap or randomisation inference over the assignment.
Buy back variance where you can. Stratify assignment by seat band and lifecycle_status before randomising, and decide in advance how the handful of very large accounts are handled, since one enterprise workspace can carry more users than a hundred single-seat ones.

Follow-up

Suppose the feature is not workspace-scoped but changes a globally shared ranking model, so no clean cluster exists. What design gets you a causal read, and what does it cost you?
You have 900 eligible active accounts in total. Given the design effect, what absolute lift can this test detect, and is the honest answer 'do not run it'?
The intraclass correlation is an estimate from last quarter. What happens to your sizing if the true value is 0.25?

Measure a paid channel without a user-level experiment

Hard · difference-in-differences · geo holdout · incrementality · clustered inference

Finance needs the incremental contribution of paid social before next year's budget. It carries 18% of last-touch-attributed signups in dim_user.last_touch_channel, but the ad platform will not randomise users and unexposed users are unobservable. The ad platform targets at market level, your warehouse resolves a market label onto fct_session, and 40 markets are eligible with 12 months of weekly signups derivable from dim_user. Design the read, size it on total signups rather than attributed ones, and state the identifying assumption and the check that would falsify it.

Approach

Say why the attributed number cannot answer the question. Last-touch assigns full credit to whichever touch was recorded nearest the conversion, which systematically rewards channels that intercept demand that already existed, and the counterfactual of not running the channel is nowhere in the touchpoint data.
Choose a geo holdout: randomise markets into a paused arm and a spend-as-usual arm, and measure total signups per market. The metric has to be the total, because the question is whether demand is created or merely relabelled, and attributed signups fall to zero in a paused market by construction.
Size on markets, since the market is the randomisation unit and therefore the variance unit. Forty markets give at most twenty per arm, so form matched pairs on twelve months of pre-period weekly signups and randomise within pair, which removes the between-market level differences that would otherwise dominate the residual variance.
Fix the identifying assumption in plain words: absent the pause, treated and control markets' signup trends would have moved in parallel. Falsify it by running the same estimator on placebo cut dates inside the pre-period; a non-zero placebo estimate or visibly diverging pre-trends kills the design as specified.
Estimate with market and week fixed effects and cluster standard errors on market. Below about forty clusters the cluster-robust error is biased downward, so use a wild cluster bootstrap or randomisation inference over the pair assignment. If only one or two markets can be paused, switch to synthetic control: weight untreated markets to match the treated market's pre-period path and use in-space placebos for inference.

Worked solution (40 min)

Aggregate weekly signups per market for twelve months from dim_user with is_internal = FALSE, and drop markets whose history is too short or too volatile to pair.
Rank markets on pre-period mean and trend, form twenty matched pairs, and randomise one of each pair into the paused arm.
Derive the MDE from the between-pair residual standard deviation of weekly signups, not the within-market one, because power is set by the number of pairs; express it as a percentage of total signups and compare it with the effect finance cares about.
Run placebo estimates at three pre-period cut dates before committing; re-pair or abandon if any is significant.
After the pause, estimate difference-in-differences with market and week fixed effects, report a wild cluster bootstrap interval, and convert the point estimate into incremental cost per signup against the spend withheld.

Expected result: A matched-pair geo holdout across twenty pairs, read on total signups with market and week fixed effects and market-clustered inference, yielding an incrementality ratio of incremental signups to attribution-credited signups. The identifying assumption is parallel counterfactual trends, checked with pre-period placebo cuts. The MDE is set by twenty pairs rather than by millions of sessions, and is usually far coarser than the requester expects.

Verify it yourself

Pre-period placebo estimates should centre on zero with intervals covering it. A systematically non-zero placebo means the pairing failed and the main estimate inherits that bias.
Treated plus control market signups in the pre-period must reconcile with the total the finance dashboard reports, otherwise the market label is silently dropping sessions.
An incrementality ratio above 1 implies the channel drives conversions it never touched. That is possible through view-through effects the model never sees, but it demands a stated mechanism rather than a shrug.

Follow-up

Campaign commitments mean the pause starts in different weeks in different markets. What does staggered timing do to a two-way fixed effects estimate when effects vary across cohorts?
How long do you pause, given that paid social has a delayed conversion tail, and how do you keep that tail out of the pre-period?
The estimate says the channel is 40% incremental. What happens to the last-touch number on the dashboard after that?

Attribute a flow-completion drop to one client build

Medium · release-regression · instrumentation · staged-rollout

Core-flow completion rate on surface = 'ios', defined as distinct flow_instance_id reaching 'flow_completed' within 30 minutes of 'flow_started' with no 'error_shown' on the same id in between, fell from 78% to 71% over four days. A new iOS build began a staged rollout on day one. Using fct_event columns flow_id, flow_instance_id, app_version, event_name, user_id and occurred_at_utc, produce the completion rate per build per day, size the loss in absolute completions, and say whether the fix is a rollback. Treat the possibility that the instrumentation changed rather than the flow.

Approach

Cut the rate by app_version and day, each build against its own denominator. A pooled series during a staged rollout is a weighted average whose weights move daily, so it declines in proportion to the rollout share even when the old build is perfectly flat; confirming that proportionality is itself the evidence the regression is build-specific rather than environmental.
Test the denominator before believing the rate. Compute flow_started events per distinct user_id on each build: if the new build re-mints flow_instance_id on retry, or fails to carry the id from start to completion, the denominator inflates and the numerator falls with nothing changing for the user.
Normalise to a user-level outcome that is immune to the id question, namely completions per distinct user_id per day on each build. This is the number that says whether anyone actually failed to finish.
Check the error path: pull error_shown counts and their properties for flow_instance_id values on the new build. A genuine regression produces errors; an instrumentation break produces missing completions with no corresponding error volume, and the two prescribe different fixes.
Size the real loss as the per-user completion gap multiplied by daily users on the new build, and give the rollback recommendation conditional on the error evidence rather than on the rate.

Follow-up

The rollout is at 45% and product wants to go to 100% tomorrow. What do you say, and what would you need by when?
If the flow_instance_id is genuinely being re-minted, what is the correct historical treatment of the four affected days?
How would you have caught this on day one instead of day four?

Suggested practice checklist

For someone who can already write the query and train the model but stalls when asked what to measure or whether a change is worth making. Metric definition and case structure come first; the technical work is kept as maintenance rather than the centre of the week.

Day 1 — Metric anatomy

For three products you use daily, write one primary metric, two input metrics that plausibly move it, and one guardrail that would catch a cheap way of moving the primary at the cost of the product.
For one of them, specify the metric precisely enough that two analysts would return the same number: numerator, denominator, unit of observation, time window, and how returning and deleted accounts are treated.
Pick a ratio metric and write what happens to it when the denominator shrinks for reasons unrelated to the numerator, with a concrete example of that happening.

Deliverable: A one-page metric tree for one product, with the primary metric written as an unambiguous spec.

Day 2 — Diagnosing a drop without guessing

Take the prompt "weekly active users fell 8 percent week over week" and write the segmentation plan before proposing any cause: platform, region, tenure cohort, acquisition channel, and whether the movement sits in the numerator or in a changed denominator.
List the instrumentation failures that manufacture fake drops (a client release that stopped firing an event, a bot filter change, a shifted date boundary or timezone) and write the query that rules out each one.
Rehearse stating the boring explanations first, seasonality and day-of-week composition, before reaching for a product cause.

Deliverable: A drop-diagnosis checklist short enough to recite from memory in under a minute.

Day 3 — Should we build it

Take a feature idea and write it as a bet: what you believe is true, what would have to be true for it to pay off, the metric that would confirm it, and the effect size that would justify the engineering cost.
Size the opportunity top-down and bottom-up, then reconcile the two numbers in writing instead of quoting whichever is friendlier.
Write the counter-metric that would make you kill the feature even if it wins on the primary metric.

Deliverable: A one-page product memo ending in a decision rather than a list of considerations.

Day 4 — The places aggregate numbers lie

Construct a Simpson's paradox numerically: two segments where the treatment wins within each segment yet loses overall, and identify the shift in segment weights that causes it.
Take a heavy right-tailed quantity such as revenue per user and write why the mean is the wrong summary, which percentile you would report instead, and what a moving mean with a stable median tells you.
Write your definition of a session for the product from day one, then name two real behaviours it misclassifies.

Deliverable: One page holding a worked Simpson's paradox table and a session definition with its two known failure cases.

Day 5 — Technical maintenance, aimed at metrics

Solve four timed SQL prompts that all end in a ratio metric, so the question of grain stays live in every answer.
Compute a 95 percent confidence interval for a proportion on a small sample, and state why the normal approximation is unreliable when either np or n(1 minus p) falls below roughly 10, along with which interval you would use instead.
Take one metric from your day-one tree, write the query that computes it correctly, then write the query that computes it wrong in the most plausible way and explain how you would notice.

Deliverable: Four solved prompts plus a matched correct and plausible-wrong query for one metric.

Day 6 — Turning engineering work into data science stories

Write three project stories as situation, decision, trade-off, outcome, each carrying one number and one thing you got wrong.
For the story you will lead with, prepare an answer to "what would you do differently" that names a decision you made, not a constraint you were handed.
Practise the sentence that reframes a systems project as a question project: the question the work answered, ahead of the pipeline it shipped.

Deliverable: Three written stories with the lead story delivered aloud and timed under four minutes.

Day 7 — Mock case and gap list

Run a 40-minute mock case with someone playing a product manager who pushes back on your metric choice, and record it.
Listen back and mark every moment you proposed a solution before the success metric existed.
Rewrite those moments as the question you should have asked, and rehearse the first 90 seconds of the case until scoping comes before solving.

Deliverable: A recorded case plus a rewritten opening 90 seconds.

Your part, not the team's

Most data work is done by groups, so an interviewer has to work out which piece was yours. An answer that runs on 'we' for several minutes gets interrupted with a question about what you personally did, and by then the answer sounds defensive even when it is true. Mark your own contribution as you go, and name the parts that belonged to someone else instead of leaving them ambiguous. Keep a few specifics back as well, like the name of the metric or who actually objected, so a probe can be answered with something you had not already said.

Can you describe a time you had to clean a complex dataset to make it usable for modeling?

Medium · behavioural and stakeholder questions

Approach

Pick a story where you drove the decision, not one where you observed it.
Close with what you would do differently, concretely.
State the situation in two sentences and spend the rest on your reasoning.

Follow-up

How did you know the outcome was caused by your change?
What would you do differently if you ran that project again?

What is your experience with Python and its relevant libraries for data analysis?

Medium · behavioural and stakeholder questions

Approach

Name the disagreement or constraint, and how you resolved it with evidence.
State the situation in two sentences and spend the rest on your reasoning.
Close with what you would do differently, concretely.

Follow-up

What did you decide not to do, and why?
What would you do differently if you ran that project again?

Defend a flat experiment readout against a post-hoc segment

Medium · experiments · segmentation · pushback

A feature you evaluated is flat on seven-day activation: +0.05pp with a 95% interval of [-0.47pp, +0.57pp], from 61,000 exposed users per arm in fct_experiment_exposure joined to dim_user and fct_event. Baseline activation is 32%. The launch team asks you to drop every surface except mobile_web, where the point estimate is +1.1pp, and re-run. You have ten minutes in their planning meeting. Deliver a spoken position: what you will and will not do, and the decision you recommend.

Approach

Recognise what is being probed: whether you hold a statistical position under social pressure without becoming either rigid or apologetic. A generic answer says the segment is not significant; a strong one separates the request into a question that is answerable (is the mobile_web number real?) and one that is not (can we ship on it?), and answers both.
Price the multiplicity out loud. The slice was chosen after seeing the results, so its estimate is selected on favourable noise and is biased away from zero. With k independent looks at a nominal 5% level, the chance of at least one false positive is 1 - 0.95^k: 26% at six segments, 64% at twenty. Quote the k you actually inspected, not the k you reported.
Use the arithmetic already in front of you. On the point estimates, a +1.1pp mobile_web effect combined with a pooled +0.05pp implies the remaining surfaces average negative in proportion to mobile_web's share of exposures. State that as a testable implication of their story rather than as a rebuttal of it.
Ask the one question that settles the category: was mobile_web named in the analysis plan before launch? If it was, it is a planned comparison and gets a corrected reading. If it was not, it is a hypothesis, and the honest move is to size the test that would confirm it.
Convert the refusal into a cost. Size a mobile_web-only confirmatory test at the claimed effect, state the weeks of mobile_web traffic it needs, and close with the recommendation: do not ship this as a lift, and note that the interval already rules out anything at or above +0.6pp, which is itself a useful input to the roadmap.

Follow-up

The confirmatory test you sized needs nine weeks of mobile_web traffic and the team has three. What do you recommend instead?
Suppose mobile_web was pre-registered. How does your reading change, and what correction do you apply?
Your interval excludes +0.6pp. Is that the same as saying the feature does nothing?