Interview guides · BorgWarner

BorgWarner Software Engineer Interview Questions & Guide 2026

BorgWarner software engineer prep on partial failure: a timed-out request has an unknown outcome, not a failed one.

The 60-second brief

As a Software Engineer at BorgWarner, you are at the heart of the automotive industry’s transition toward sustainable mobility. This role is critical to the development of high-performance propulsion systems and advanced software-defined vehicle architectures. You will contribute to the digital backbone that enables modern, electrified, and efficient transportation.

Ask how many rounds there are and what each one is before you plan your weeks, because the composition is what your hours should follow. A loop with three coding rounds and one short design conversation deserves a different split from the reverse, and whoever schedules it will usually say plainly which it is.

Focus areas

Keep money in integer minor units
Evolve APIs without breaking pinned SDK clients
Bound blast radius with per-tenant concurrency limits

Overview

Your work will directly influence how global automotive manufacturers integrate sophisticated software into their vehicles. Whether focusing on system integration, infrastructure, or core programming, you will solve complex technical challenges that require a blend of reliability, innovation, and precision. You will be part of a global team focused on engineering excellence, where your code directly impacts the safety and efficiency of next-generation mobility solutions.

BorgWarner places a high premium on candidates who demonstrate both technical proficiency and a strong understanding of how software integrates with hardware systems in an automotive context.

The BorgWarner interview process

BorgWarner candidates report 4 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

Before anything technical happens, someone has to decide which rung of the ladder your loop is calibrated to, and that decision sets the bar for every round after it. It comes from how you describe scope, not from your title, because titles do not convert cleanly between companies. The weak version of the answer is team size and years. The strong version names the largest change you shipped where nobody reviewed the design, what would have broken if you had been wrong, and what you were paged for. Get the level said out loud on this call, because the range and the loop both follow from it.

What to demonstrate

Whether the scope in your own account maps onto a level the team actually has an opening at, so a mismatch ends the process cheaply rather than after four interviewers have spent a day
Whether your title needs re-mapping: the same word describes very different amounts of independent decision-making at a twenty-person company and a ten-thousand-person one
Whether your compensation expectation can be filled at that level in the structure the role pays in, which is why the number gets asked for before any engineer is scheduled

How to prepare

Write down two changes from the last two years: the largest one you designed with nobody reviewing the design, and the largest one where someone more senior did. Lead with the first when scope comes up, and be ready to say which parts of the second were yours
Ask which level the loop is calibrated to and what changes at the level above it, then plan your weeks from that answer rather than from the posting
Settle a total-compensation range beforehand with the split named, base against bonus against equity and its vesting period, so a question about numbers gets a number instead of the word market

Technical Deep Dives

Input bounds are the part of the prompt most often skimmed, and they usually contain the answer. They tell you which complexity class is admissible, which narrows the search before you have thought about the problem itself. As a rough planning figure, a compiled language does on the order of 10^8 simple operations per second and an interpreted one roughly an order of magnitude less. So n up to about twenty admits enumerating subsets, a few thousand admits a quadratic pass, and a million admits neither: you need near-linear, or linear with a log factor. If the bounds are missing, ask for them.

What to demonstrate

Whether the approach is justified by the stated input size rather than by whichever pattern you recognised first
Whether you ask about the properties that change the algorithm: whether the input arrives sorted, whether duplicates occur, whether values are bounded integers, whether it all fits in memory
Whether you can name the bottleneck in your own solution and what would remove it, even when you deliberately leave it in place
Whether a claimed speedup is real, since memoising a recursion only helps when subproblems genuinely overlap and the state can be keyed cheaply

How to prepare

For each algorithm you rely on, write down the largest n it handles in roughly a second, then check two of those figures by timing them in the language you will actually type in
For two weeks, write one line naming your target complexity and the bound that justifies it before you write any code, then compare that line with what you ended up submitting
Practise the conversion backwards: given a required O(n log n), list the mechanisms that get you there (sorting, a heap, an ordered map, divide and conquer) and choose by what the problem needs to query, not by what you used last

Architectural Discussions

You cannot drill a format you do not know, so put the preparation into material that travels. Three pieces of your own work, each rehearsed until you can take a follow-up you did not anticipate, will carry a conversation or a code walkthrough equally well. Specificity is what separates that from filler. A number needs its definition before it means anything: a p99 is over some window and measured at some hop, and a server-side figure excludes the queueing and network time a client would see. The number you cannot qualify is the one to leave out.

What to demonstrate

Whether your examples carry detail only someone who did the work would hold, such as what the binding constraint actually was, which alternative you rejected and why it was worse, and what you measured on each side of the change
Whether a number survives one follow-up, meaning you can say what it was measured over and whether it moved because of your change or merely alongside it
Whether a failure is described with the specific change that followed it, rather than a lesson stated in general terms
Whether your part in a team effort is stated accurately, including what other people did

How to prepare

Write a page on each of three projects covering the constraint, the option you rejected, the measurement before and after, and what went wrong. Cut any line you cannot take a follow-up on, since you are writing the parts you will be pressed on rather than a summary.
Recover the real figures while you still have access: request volume, data size, latency with its percentile and window, team size, timeline. Note where each came from, whether a dashboard, a design document or memory, and mark the estimates so you can say which they are out loud.
Take your weakest project story to someone who works in a different area and have them ask why four times in succession. The point where you run out of answer is the part to go and re-read before the round.

Behavioral Assessments

Many of these questions are about something that went wrong, and the grading sits mostly in the hours after you knew. Who found out first, whether that was you or an alert or a user, how long it took you to say it out loud, and whether the people who needed the news got it while they could still act on it. Engineers under-tell this part because it feels like confessing. The pattern it is looking for is the opposite: the quiet fix, an incident absorbed without telling anyone, after which nothing changed and the same failure is still available.

What to demonstrate

How the problem was found, and whether that route was one you had built or one that happened to you, since a user reporting it first means your instrumentation did not cover that failure
Whether time-to-detect and time-to-tell are separate numbers in your account and whether you know both, because a fast fix that nobody heard about until the retro is a different answer from a slow one that was announced immediately
Whether the resolution left something durable behind, a check that fires or a default that changed, rather than depending on people remembering to be careful
Whether you can say what the failure cost without either inflating it or waving it away

How to prepare

Reconstruct one incident you were part of as a timeline with clock times: first bad request, first signal, first person who knew, first message outside the team, mitigation, permanent fix. The gaps between those entries are what gets asked about
Look up the configuration of the signal that caught it, including its evaluation window and threshold. An alert defined on a five-minute aggregate cannot fire until the condition holds across that window, which puts a floor under time-to-detect that has nothing to do with how severe the failure was. Be able to say what that floor was and whether anyone had chosen it deliberately
Prepare one story where you escalated early and the severity turned out to be smaller than you thought, including what it cost the people you pulled in. Without it, every answer you give about raising alarms is unfalsifiable

Where candidates lose points

Paginating a growing table with limit and offset

Two unrelated defects share the idiom. Correctness: rows inserted or deleted between page requests shift the window, so a consumer walking an export skips rows and sees others twice, which for a customer-facing sync is silent data loss rather than an error anyone notices. Cost: the database still produces and discards the skipped rows, so page N costs time proportional to N times the page size and a deep page on a large table degrades from milliseconds to seconds. Keyset pagination over a stable, unique, indexed ordering -- where (created_at, id) < ($1, $2) order by created_at desc, id desc limit $3 -- is constant-cost per page and immune to shifting, on the precondition that the cursor columns never change value for a row, which disqualifies updated_at as a cursor.

Serialising a tenant's writes through select ... for update on a single counter row

It is the first change that makes a counter correct, and it caps that tenant's write throughput at roughly one divided by the lock hold time. A transaction that takes the lock, makes a network call and then commits holds it for the entire round trip: at 2 ms that is about 500 writes per second for the whole tenant, and the largest tenants are exactly the ones that exceed it. The damage then spreads, because every waiter holds a database connection while it queues, so one hot tenant drains the shared pool and the symptom presents as a site-wide latency incident rather than as a lock problem. The repairs are to shrink the critical section to a single statement, to shard the counter into per-(tenant, hour) or per-(tenant, bucket) rows and sum on read, or to batch in memory and flush periodically while accepting the bounded loss that batching implies.

Finishing a solution without stating its complexity

Give time and space in the same breath as the code, and define n explicitly when there are two sizes, since n nodes and m edges are not interchangeable. Space is the half that gets skipped: count the auxiliary structures you allocate and the recursion stack at its deepest, not only the answer you hand back.

Optimising an axis nobody named

Ask which resource is actually scarce here: wall-clock latency, throughput, memory footprint, cost per request, or engineering time. Shaving a constant factor off an in-memory step is wasted effort when the same function makes a blocking remote call inside the loop.

Questions & practice

Find peak concurrent sandbox usage from run intervals

Medium · sweep-line · intervals · concurrency-caps · null-semantics

Given up to 5 million job_run rows for one tenant over one day, with run_id, started_at, finished_at, status and wall_clock_limit_seconds, report the maximum number of sandboxes running at once, the earliest instant that maximum is reached, and the first run_id that would breach a per-tenant cap of C. started_at is null while a run is queued; finished_at is null both for runs still executing and for runs in status lost. Treat a run as occupying [started_at, finished_at). Give the complexity and state how you handle each null.

Approach

Turn each run into two sweep events, (started_at, +1) and (end, -1), then sort the 2n events by timestamp with -1 ordered before +1 at equal timestamps. That tie-break is what makes the interval half-open, so a run finishing at 10:00:00 and one starting at 10:00:00 never overlap.
Decide each null out loud before sweeping, because each choice moves the answer. A null started_at means queued and contributes nothing. A null finished_at with status running or leased is clipped to the window end. Status lost has no observed end at all, so clip it at started_at + wall_clock_limit_seconds on the grounds that the supervisor owns the timeout, and record that you did. The table's check (finished_at is null or started_at is not null) guarantees you never see an end without a start.
Sweep once, maintaining a running counter, the maximum, and the timestamp at which the maximum was first attained (update peak_at only on a strict increase, or you will report the last such instant instead of the earliest). Capture the first run_id whose +1 takes the counter to C+1 during the same sweep rather than in a second pass.
Complexity: O(n log n) dominated by the sort, O(n) space. If rows already arrive ordered by started_at, a min-heap of end times gives O(n log k) time and O(k) space with k the peak concurrency, which is the better shape when the rows come from an index scan on (tenant_id, started_at).
If second resolution is acceptable, counting-sort the endpoints into an 86,400-slot delta array and prefix-sum it: O(n + T) time and O(T) space, which beats the comparison sort at 5 million rows. It answers only at second granularity, so state which resolution the cap is defined in.

Follow-up

Now report peak concurrency per tenant for 10,000 tenants from one globally sorted stream. What changes about memory and about the sort?
The cap has to be enforced at dispatch rather than reported afterwards. What does the admission check look like, and where does it race?
How would you answer 'peak concurrency within any 5-minute window' without re-sorting?

Schedule ordered webhook retries with a heap of subscription queues

Medium · heap · scheduling · backoff · head-of-line-blocking

Design the in-memory scheduler for webhook delivery. Up to 20 million rows sit in status pending or failed_retryable across 200,000 subscriptions, each row carrying next_attempt_at and attempt_count, and each endpoint having a circuit breaker. Deliveries for one subscription must be attempted in order, so at most one attempt per subscription may be in flight. Support due(now), complete(delivery, outcome) and insert(delivery) in O(log S), where S is the subscription count rather than the delivery count. Give the backoff formula you schedule retries with.

Approach

Key the global heap by subscription, not by delivery. Each subscription owns a FIFO of its due deliveries in event order; the heap holds one entry per eligible subscription, keyed by its head's next_attempt_at. That is 200,000 heap entries instead of 20 million, and it makes the one-in-flight rule structural rather than a check somebody can forget.
due(now): peek the minimum. If its key is in the future, sleep until then instead of spinning. Otherwise pop it, move the subscription into an in-flight set, and do not re-push it. A subscription absent from the heap cannot be dispatched twice, which is precisely how ordering is preserved.
complete: on success, drop the head and re-push the subscription keyed by its new head, or leave it out when the queue empties. On a retryable failure, increment attempt_count and set next_attempt_at = now + uniform(0, min(cap, base * 2^attempt)), sampled uniformly across the whole interval. That is full jitter; deterministic backoff re-synchronises the herd you just created.
Circuit breaker: park the subscription in a second heap keyed by its half-open time, so an endpoint dead for six hours costs one heap entry and zero attempts rather than consuming worker slots. Admit exactly one probe at half-open and close the breaker only on its success.
Say the price of the ordering guarantee out loud. One in-flight attempt per subscription means an endpoint answering in 10 seconds drains at 0.1 deliveries/second however many workers you run, and its backlog grows until it recovers. If the customer does not need order, allow k in flight and document delivery as unordered; that is the trade, and it is a product decision.
All three operations are O(log S) with O(S) resident heap memory and the queues themselves backed by the store. The database-backed equivalent is a partial index on (subscription_id, next_attempt_at) where status in ('pending','failed_retryable') claimed with FOR UPDATE SKIP LOCKED, and the write-back must be fenced on lease_token so a worker that stalled and resumed cannot overwrite a newer attempt.

Worked solution (30 min)

Define the four structures explicitly: queues: subscription_id -> deque[delivery], ready: min-heap of (next_attempt_at, subscription_id), inflight: set[subscription_id], breaker: min-heap of (half_open_at, subscription_id).
Write down the invariant you will assert after every operation: a subscription appears in at most one of ready, inflight and breaker, never in two.
Implement due, complete and insert, then simulate 200,000 subscriptions with Zipf-distributed queue depths totalling 20 million deliveries.
Add one endpoint that always times out after 10 seconds and one that always answers in 20 ms, then measure the fast endpoint's throughput with and without the per-endpoint breaker.
Instrument heap size across the run.

Expected result: Heap size stays at or below 200,000 regardless of the 20 million deliveries. The fast endpoint's throughput is unaffected by the dead one once the breaker trips. The dead endpoint's deliveries accumulate in their own deque and cost exactly one heap entry.

Verify it yourself

The asserted invariant never fires under concurrent workers.
Replaying the same delivery set twice produces identical per-subscription ordering, even though the interleaving across subscriptions differs.
Replacing full jitter with fixed backoff makes retry attempts cluster visibly in a histogram of attempt timestamps.

Follow-up

One subscription has 4 million queued deliveries. What stops it from starving the other 199,999, and what does your heap look like under that load?
A customer requests redelivery of last Tuesday's events. Where do those rows enter your structure, and what keeps them from reordering live traffic?
The process restarts. How much state do you rebuild, and what stops every subscription from being attempted in the same second?

Fold a deduplicated usage stream into hourly rollups

Easy · aggregation · deduplication · watermarks · exact-arithmetic

You are given one day of usage_event rows, up to 250 million, each carrying event_id, tenant_id, workspace_id, environment, sku, quantity numeric(20,6), idempotency_key, occurred_at and ingested_at. Produce usage_rollup_hourly cells keyed (tenant_id, workspace_id, sku, hour_start) with quantity_sum, event_count and source_max_ingested_at. An event counts once per (tenant_id, idempotency_key). The rollup grain has no environment column, so state your filter. One pass. Give your time and space bounds, and say what the deduplication actually costs in memory.

Approach

Bucket on occurred_at, never ingested_at: hour_start = date_trunc('hour', occurred_at at time zone 'UTC'). The two columns answer different questions. occurred_at says which hour the customer is billed for; ingested_at says how current the fold is. Using the second for the first makes late data invisible instead of correctable.
The fold is trivial and the deduplication is the entire cost, so price it before designing anything clever. An exact set over (tenant_id, idempotency_key) at 250M entries, stored as a 16-byte 128-bit hash in an open-addressed table at 0.7 load factor, needs about 357M slots at 16 bytes each, roughly 5.7 GB. The fix is partitioning by hash(tenant_id) % P so each shard holds 1/P of the set and no tenant's keys straddle shards.
Rule out a Bloom filter as a replacement, in the right direction: a false positive reports 'already seen' for an event never seen, so you drop a real event and lose revenue with no error raised. It is usable only as a negative pre-filter in front of the exact set, where a miss is conclusive and a hit must fall through to the real lookup.
Accumulate in scaled integers, not binary floating point. numeric(20,6) admits values below 10^14, so one event scaled to micro-units can reach 10^20, past int64's 9.22 x 10^18; use a 128-bit or arbitrary-precision accumulator unless you first bound the per-event maximum. binary64 represents integers exactly only to 2^53, about 9.01 x 10^15, and cannot represent 0.1 at all, so two runs that sum in different orders disagree.
Carry source_max_ingested_at = max(ingested_at) over the events folded into each cell, and count event_count over accepted, post-dedup events. Without that watermark there is no way to prove later what a number did and did not include, which is the first question any reconciliation asks.
State the environment filter explicitly, because the rollup grain cannot record it. A fold that quietly includes staging bills non-production traffic; one that quietly excludes it loses a cost signal. Production-only is the billing answer, and either way it belongs in the job name and the output metadata. Complexity: O(n) time, O(distinct dedup keys) space, dominated by the dedup set rather than by the cells.

Follow-up

A producer retries at 23:59:59 and the retry lands at 00:00:01. The unique index on the daily-partitioned table must include the partition key. What gets double-counted, and what is the smallest change that fixes it?
The consumer acknowledges its batch before committing the fold. Which failure loses revenue now, and which arrangement duplicates instead?
What makes a re-run over the same day produce byte-identical rollups?

Migrate a live partitioned event table without blocking ingest

Hard · online migration · ddl locks · expand and contract · partitioning

usage_event is range-partitioned daily on ingested_at, holds roughly 250M rows per day across 400 live partitions, and is written at 10-40k rows/second. Two changes are required: quantity must move from double precision to numeric(20,6), and a new environment column must become NOT NULL with a default of 'production'. Ingest cannot stop. Give the ordered plan, naming for each step the lock it takes, what that lock blocks, and roughly how long it is held. Identify the one step that cannot be rolled back cleanly once traffic depends on it.

Approach

Classify the two changes before planning anything. Adding a column with a non-volatile default has been metadata-only since PostgreSQL 11, so it is cheap. Changing double precision to numeric is not binary-coercible, so alter column ... type rewrites every partition under ACCESS EXCLUSIVE and rebuilds its indexes; on this volume that is hours of blocked ingest and is simply not an option, which is why the plan is expand-and-contract rather than one statement.
Expand: add quantity_numeric numeric(20,6) and environment with its default on the parent. Both are catalogue-only but both take a brief ACCESS EXCLUSIVE that cascades to partitions, so run each with lock_timeout set to a second or two and retry on failure. A queued ACCESS EXCLUSIVE request blocks every reader behind it, which is how a metadata-only change turns into an outage.
Dual-write: deploy producer code that populates both columns on every insert, and leave it running before anything reads the new column. This is the step that cannot be reverted cleanly. Once readers depend on quantity_numeric, reverting the writer leaves rows with a null there, and the gap is only discoverable by re-reading the old column, which the readers have stopped doing.
Backfill older partitions in batches keyed on the primary key, oldest first, committing every few thousand rows with a pause between batches, and skipping the partition still receiving writes until it rotates. Each batch is an ordinary UPDATE taking row locks only. The cost is bloat and WAL rather than blocking, so watch dead tuples and let autovacuum keep pace instead of wrapping 400 partitions in one transaction.
Make NOT NULL cheap with the three-step form: add constraint ... check (environment is not null) not valid (brief ACCESS EXCLUSIVE, no scan), then validate constraint (SHARE UPDATE EXCLUSIVE, scans while reads and writes continue), then set not null, which from PostgreSQL 12 uses the validated check and skips its own full scan. Do this per partition, then on the parent.
Switch and contract: move reads to the new column behind a flag, verify over a full period that both columns agree on freshly written rows, drop the old column (metadata-only), and only then remove the dual-write. Any index on the new column goes on with CREATE INDEX CONCURRENTLY per partition, since CIC is not supported on a partitioned parent: create the parent index with ONLY, build each child concurrently, then ALTER INDEX ... ATTACH PARTITION until the parent index becomes valid.

Follow-up

A CREATE INDEX CONCURRENTLY fails halfway through the partition list. What state is the table in, how do you detect it, and what do you run?
The producer computes quantity itself. What happens to a request already in flight when the dual-write deploy lands, and does it matter?
Give two queries that prove the backfill is complete: one cheap enough to run every minute, one authoritative.

Paginate a tenant's delivery export without skipping rows

Easy · keyset pagination · indexing · multi-tenancy

A customer exports webhook_delivery: delivery_id (bigint identity), subscription_id, tenant_id, event_id, status, attempt_count, next_attempt_at, created_at, delivered_at, updated_at. The endpoint runs select ... where tenant_id = $1 order by created_at desc limit 100 offset $2, and customers report rows missing from exports taken while new deliveries are being inserted. Write the replacement query and the index that supports it, paging a tenant's deliveries newest first at constant cost per page. State why updated_at cannot be the cursor column.

Approach

Name the defect precisely. OFFSET is a position in a result set that is recomputed on every request, so a row inserted ahead of the window shifts everything back by one and the next page starts after a row the client never received. Nothing errors and no identifier gap appears, so the loss is silent.
Replace the position with a value predicate over a stable, unique, indexed ordering: where tenant_id = $1 and (created_at, delivery_id) < ($2, $3) order by created_at desc, delivery_id desc limit 100. The row comparison is load-bearing: created_at alone is not unique, so ties straddling a page boundary are dropped or repeated, which is the same bug in a smaller window.
Index (tenant_id, created_at, delivery_id). PostgreSQL scans a btree in either direction, so an all-DESC ORDER BY is served by an ASC index read backwards and no DESC modifiers are needed; they only matter when the ORDER BY mixes directions. Confirm the plan has no Sort node above the index scan, or the LIMIT stops being an early exit.
Price both forms: keyset is one index descent plus 100 adjacent leaf entries per page, constant regardless of depth, while OFFSET still produces and discards every skipped row, so page N costs time proportional to N times the page size and a deep page on a large table goes from milliseconds to seconds.
Rule out updated_at as the cursor from the precondition, not from taste: a cursor column must never change value for a row already paged past. updated_at moves on every delivery attempt, so a row the client already emitted re-enters a later page and is exported twice. created_at and delivery_id are immutable, which is the whole qualification.

Worked solution (20 min)

Load about 50k deliveries for one tenant, then walk them with the OFFSET query while a writer inserts 10 rows/second, collecting every returned delivery_id.
Compare the distinct ids collected against the set of ids that existed when the walk started, and record the shortfall.
Repeat the walk with the keyset query and confirm every pre-existing id is returned exactly once.
Run explain (analyze, buffers) on page 1 and page 500 of each form and compare shared buffer hits.

Expected result: A keyset query using the row comparison (created_at, delivery_id) < ($2, $3) with order by created_at desc, delivery_id desc limit 100, backed by (tenant_id, created_at, delivery_id) scanned backwards; plus the statement that OFFSET drops rows under concurrent insert and costs time proportional to the offset, and that updated_at is disqualified because it mutates on retry.

Verify it yourself

Buffer counts for page 500 are the same order of magnitude as page 1.
Every id present before the walk is returned exactly once when only inserts run concurrently.
The query plan shows no Sort node above the index scan.
Two rows sharing a created_at value to the microsecond are both returned across the page boundary.

Follow-up

The client wants a snapshot as of one instant rather than a live tail. Compare a repeatable-read transaction held open, an added created_at <= $snapshot bound, and a materialised export table.
A retention job deletes deliveries older than 90 days. What does a client mid-walk see, and does keyset pagination help at all?
The customer wants to resume an export from yesterday's last cursor. What must be true of the cursor for that to be safe?

How do you approach the integration of disparate software modules in a complex system?

Medium

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

How do you ensure code quality and maintainability in a large-scale project?

Medium

Approach

State your assumptions explicitly before working the problem.
Work from the requirement backwards to the design.
Clarify what is being asked and what a complete answer contains.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

Leasing sandboxed job runs without double execution

Medium · leases · fencing · state machines · metering

job-runner leases work from a queue and executes customer workloads in sandboxes with CPU, memory, wall-clock and egress limits. Run durations span 200 ms to 30 minutes, thousands are concurrent, and job_run.status must reach exactly one terminal state among succeeded, failed, timed_out, cancelled and lost. A worker can pause 45 seconds for garbage collection, or be briefly partitioned, after its sandbox has exited but before it writes the outcome. Design the lease duration, the fencing, and timeout ownership, and state how billable_seconds is computed for a run whose worker never returns.

Approach

Resolve the lease-duration conflict rather than picking a compromise. A lease shorter than the longest legitimate run re-dispatches work that is still executing; a lease long enough for a 30-minute run leaves a crashed 200 ms run undetected for half an hour. Use a short lease - about 30 seconds - renewed by a heartbeat every 10 seconds while the supervisor is alive, each renewal pushing leased_until to now() + 30 s. Detection latency is then one lease, not one heartbeat: a dead worker's last successful heartbeat landed at most 10 s before it died, so leased_until expires 20 to 30 s after the death, plus whatever interval the reaper scans on. What the 3:1 ratio of lease to heartbeat buys is headroom - one or two missed heartbeats change nothing, and a stall only becomes a re-dispatch once it outlives the lease remaining when it began, between 20 and 30 s here. Both costs follow from those two numbers: heartbeat write load proportional to concurrent runs (3,000 runs at a 10-second interval is about 300 updates/second), and any pause longer than the lease - the 45-second GC - re-dispatching a run that is perfectly healthy.
Fence the outcome write so the store, not the worker's memory, arbitrates: UPDATE job_run SET status = $1, finished_at = $2, exit_code = $3 WHERE run_id = $4 AND status = 'running' AND lease_token = $5, and require exactly one row affected. Zero rows means this worker was fenced while it was paused, and its correct behaviour is to discard the result, not to retry - the retry is how a resumed worker overwrites a newer attempt.
Make the status machine monotone with a check constraint or a trigger so no terminal row can move, and model a retry as a new row with parent_run_id set and attempt incremented rather than a reset of the old one. That is what keeps how many times did this actually execute answerable afterwards and keeps each attempt's resource usage attributable to itself.
Put the wall-clock timeout in the supervisor, never in the workload: a customer-supplied program asked to time itself out will not. Distinguish timed_out, which the supervisor observed and caused, from lost, which nobody observed at all, and leave exit_code null unless the supervisor actually saw the process exit. Recording lost as failed asserts an outcome no one witnessed and then bills and retries on that assertion.
Decide billable_seconds for the unobserved case explicitly, because it cannot be derived. It is not now() - started_at, which bills queue and pause time the customer never consumed. The two defensible policies are leaving it null while status = 'lost' and billing nothing, or flooring it at the last heartbeat's observed running time as a stated lower bound; pick one and write it down. Add a per-tenant concurrency cap on sandbox slots so one tenant cannot occupy the whole fleet while these questions are being answered.

Worked solution (30 min)

Draw the timeline: last successful heartbeat at t, sandbox exits at t, worker pauses from t to t+45 s, so leased_until = t+30 s and the lease expires there. Mark where the second worker starts and where the first worker's write arrives, then say how short the pause would have had to be to change nothing.
Write the fenced terminal update and state the expected rows-affected in both the healthy case and the fenced case.
Size the heartbeat: 3,000 concurrent runs at a 10-second interval is about 300 row updates/second on job_run - decide whether that lands on the same table and what it contends with.
Write the billable_seconds rule for each terminal status and say which status leaves it null.

Expected result: A short lease of roughly 30 seconds renewed by a 10-second heartbeat, so detection latency is one lease - 20 to 30 seconds after a worker dies, plus the reaper's scan interval - independent of the 200 ms to 30 minute run spread, with one or two missed heartbeats tolerated rather than fatal; a terminal write fenced by AND status = 'running' AND lease_token = $x where zero rows affected means discard; retries as new rows with parent_run_id; a supervisor-owned wall-clock kill that separates timed_out from lost; billable_seconds left null while status = 'lost', or floored at the last heartbeat as a stated policy, never inferred from wall-clock.

Verify it yourself

In your timeline the fenced write must affect zero rows. If it affects one, the lease alone was doing the work and the token adds nothing.
At 3,000 concurrent runs and a 10-second heartbeat, check 300 updates/second against the other write load on that table before accepting the interval; if it is the dominant writer, the heartbeat belongs somewhere else. Check the ratio too: at lease = 3 x interval a lost heartbeat is survivable, whereas at lease = interval every scheduling hiccup is a double execution.
State whether a duplicate execution is billed, then confirm that summing billable_seconds across a parent and its retry matches that stated policy rather than matching it by accident.

Follow-up

A worker returns from a 45-second GC pause and writes succeeded. Walk through what the database does statement by statement.
Heartbeats are now a few hundred writes a second against job_run. How do you keep that off the path that matters, and what do you lose by moving it?
The re-dispatched workload has an external side effect the first attempt already performed. What does your design owe the customer, and what can it not fix?

Hourly rollups merge one hour and lose another

Easy · timezone · rollups · reconciliation

Reconciliation flags one tenant on one day. Summing usage_event.quantity by hour of occurred_at gives 24 non-empty hours, but usage_rollup_hourly holds 23 rows for that tenant, workspace and SKU, one of which carries roughly the sum of two adjacent hours. Other days reconcile exactly, and the affected date matches a civil-time transition. hour_start is documented as truncated to the hour in UTC. You have both tables, the rollup job source, and its runtime environment. Give an ordered checklist, the mechanism, and the correction path for a day that may already be sealed.

Approach

Bisect by dimension until one cell explains the whole difference: tenant, then day, then SKU, then hour. A defect confined to a single transition date already rules out deduplication and late arrival, both of which are indifferent to which hour an event lands in.
Read the truncation with its precondition stated: date_trunc on a timestamptz value is evaluated in the session TimeZone, not in UTC. If the job connects without pinning that setting, it inherits the server or container default.
Follow that to the collision: in a zone that observes daylight saving, two distinct UTC hours map to the same local wall-clock label at the autumn transition, so both fold into one key under the unique constraint on (tenant_id, workspace_id, sku, hour_start) and their quantities sum into one row. At the spring transition a label never occurs and the row is simply absent.
Confirm from data rather than from reading code: run the same aggregate twice, once with the session pinned to UTC and once with the job host zone, and check that the second reproduces the stored rollup exactly.
Fix at the source by pinning the connection to UTC explicitly, or by truncating on occurred_at AT TIME ZONE 'UTC', rather than relying on a default that differs between a developer machine, CI and production.
Correct according to status, not convenience: an open hour is recomputed with revision incremented, a sealed hour is frozen and the difference becomes an adjustment line on the next invoice with voided_by_line_id pointing at the line it reverses.

Follow-up

The same job also emits a daily figure for a dashboard. Why can a correct hourly rollup still produce a wrong day, and what does the tenant's billing timezone have to do with it?
How would you detect this class automatically rather than waiting for reconciliation, given that it only manifests twice a year per zone?

Suggested practice checklist

For a candidate senior enough that the loop turns on design and judgement rather than on whether the coding round gets finished. Five days build one system properly and then stress it; coding gets a single maintenance day, on the assumption that the risk at this level is an unexamined tradeoff rather than a missed algorithm.

Day 1 — Numbers before diagrams

Build your own reference card of the figures you will re-derive all week: bytes for a realistic record, requests per second implied by a given daily active count, and the storage that a year at a given write rate produces. Derive each one rather than copying it, because the derivation is what survives a follow-up.
Turn one product statement into capacity requirements. From ten million daily users at four writes and forty reads each, state the peak-to-average factor you are assuming and why, then produce peak write QPS, peak read QPS and a year of storage.
Write the two numbers whose order of magnitude changes the design, the read-to-write ratio and the working-set size against memory per node, and state the threshold at which each one flips your answer.

Deliverable: A one-page numbers card and one worked capacity estimate with every assumption written down.

Day 2 — One system, from requirements to schema

Spend the first ten minutes producing only functional requirements, non-functional targets with numbers attached, a p99 latency, a durability expectation, a consistency requirement, and an explicit out-of-scope list.
Define the interface before the boxes: the three or four endpoints, their parameters, what each returns, and which of them are idempotent.
Write the data model, then write the single access pattern that justifies it, and state what the schema would have to become if the dominant access pattern were the other one.

Deliverable: One design carried to endpoint-and-schema depth, with non-functional targets expressed as numbers and a written out-of-scope list.

Day 3 — The consistency you are actually buying

Write out what a client sees under asynchronous replication when its write commits on the leader and its next read is served by a lagging follower, then write the two fixes, pinning that session's reads to the leader for a bounded window or carrying a version token the replica must reach, and the cost of each.
Work the quorum arithmetic on paper for N of three with W and R of two, and separate what R + W > N does guarantee, that any read set intersects any write set, from what it does not: on its own it is not linearizability, and a sloppy quorum that accepts writes on nodes outside the preference list breaks even the intersection.
Take two storage choices with different defaults, a single-leader relational store committing synchronously and a quorum-replicated store that converges eventually, and write the specific product behaviour that would be wrong under each, rather than a general statement about which is stronger.

Deliverable: A page separating what quorum overlap guarantees from what it does not, with one concrete product misbehaviour attached to each gap.

Day 4 — Failure is the design

For one write path, work through the case where the client times out after the server has already committed, then design the idempotency key: who generates it, how long it is retained, and what the duplicate request returns.
Express the retry policy as parameters rather than as a word: maximum attempts, base delay, backoff factor, jitter, and which error classes are retried at all. Then state why retrying a non-idempotent write without a key is a correctness bug and not merely waste.
Compute the fan-out effect on tail latency. If a request waits on ten backends and each independently exceeds its p99 one percent of the time, the chance at least one is slow is 1 - 0.99^10, about ten percent. Then write why independence is the optimistic assumption and what correlates them in practice.
Name the backpressure mechanism for one queue or one dependency in the design, a bounded queue with shedding or a concurrency limit, and write what the caller is told when it engages.

Deliverable: One write path with an idempotency design, a parameterised retry policy, and a written tail-latency calculation with its assumption named.

Day 5 — Scaling the hot path

Choose cache-aside or write-through for one read path and write the staleness window each produces, then name the invalidation event and what the system does when that event is lost.
Design against the stampede: either coalesce requests so only one recomputes a missing key, or refresh early with jittered expiry, and write why identical TTLs on keys populated in the same moment produce a synchronised expiry and a thundering herd.
Shard one table by a key you choose, then answer the two questions that break the choice: which queries now require a scatter-gather, and what happens to the distribution when one tenant is a hundred times larger than the median.
Write the cost of adding a node under plain modulo placement, where nearly every key moves, against consistent hashing, where roughly one key in n+1 moves, and state what virtual nodes are for.

Deliverable: A caching and sharding decision for one path, each with its failure mode and its rebalancing cost written beside it.

Day 6 — Keep the coding hand in, at the bar that applies to you

Solve one medium problem in thirty minutes, then spend twenty more making it production-shaped: named invariants, validation at the boundary, and errors that distinguish a caller mistake from an internal fault.
Write the tests you would require of a colleague's version of that function: one for empty input, one for the boundary, and one for the case the implementation is most likely to get wrong.
Read a piece of your own code from six months ago and write the change you would ask for, phrased as you would actually phrase it in review.

Deliverable: One problem hardened to review standard, with its test list and one written review comment.

Day 7 — Defend it while being interrupted

Run a forty-five-minute design mock with an interviewer briefed to change a requirement halfway, a tenfold traffic increase or a new strict consistency requirement, and to push on one number you estimated.
Rehearse the two sentences a senior loop is listening for: naming the tradeoff you are choosing against and why, and saying what you would measure to learn that the choice was wrong.
Prepare the design you regret: a real decision, the constraint that produced it, what it cost, and what you changed afterwards.

Deliverable: Mock notes recording how the design changed under the new requirement, plus a written account of one regretted decision.

Scope is read from what you decided

Team size, service count and tickets closed say very little. Seniority shows in the decision you owned: what you chose not to build, which constraint you traded away, whose objection you had to resolve before anything could move. A large project where you executed someone else's plan is a small story.

How do you handle tight deadlines when project requirements are still evolving?

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Name the disagreement and how you resolved it with evidence.
Close with what you would do differently, concretely.

Follow-up

How did you know your change caused the improvement?
What would you do differently if you ran that again?

How do you communicate complex technical concepts to non-technical stakeholders?

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Pick a story where you made the decision, not one where you watched it.
Give the blast radius: what could have broken, and what you measured.

Follow-up

What would you do differently if you ran that again?
What did you decide not to do, and why?

Describe a situation where you had to mentor a junior developer or lead a technical initiative.

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Close with what you would do differently, concretely.
Give the blast radius: what could have broken, and what you measured.

Follow-up

What did you decide not to do, and why?
What would you do differently if you ran that again?

What motivates you to solve difficult engineering problems?

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Close with what you would do differently, concretely.
Give the blast radius: what could have broken, and what you measured.

Follow-up

What would you do differently if you ran that again?
What did you decide not to do, and why?