cswork / libraryOpen practice workspace

Interview guides · Binghamton University

Binghamton University Software Engineer Interview Guide

Binghamton University Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

The role of a Software Engineer at Binghamton University is crucial for developing and maintaining software applications that enhance the university's operational effectiveness and academic programs. As a Software Engineer, you will directly contribute to projects that impact students, faculty, and administrative staff, ensuring seamless experiences in areas like learning management systems, data analytics, and campus services. You will engage with a diverse range of technologies and frameworks, working collaboratively with cross-functional teams to design, implement, and optimize software solutions. This position is not just about coding; it involves understanding the unique challenges faced by the university setting, such as scalability, user experience, and integration with existing systems.

This guide is scoped to a Software Engineer candidate at Binghamton University.

Focus areas

  • C
  • Condition variables
  • Thread synchronization

The Binghamton University interview process

Binghamton University candidates report 3 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

The first phase where candidates are screened to assess their basic qualifications and fit.

What to demonstrate

  • The first phase where candidates are screened to assess their basic qualifications and fit
  • Depth in C

How to prepare

  • Be able to walk your CV end to end in two minutes, and say why this company specifically.
  • Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Interviews

One or two interviews that focus on coding skills and problem-solving abilities.

What to demonstrate

  • One or two interviews that focus on coding skills and problem-solving abilities
  • Depth in C

How to prepare

  • Answer aloud and timed: What are the advantages of using a linked list over an array?
  • Answer aloud and timed: Describe how you would implement a lock in a multi-threaded environment.

Behavioral Interviews

Interviews that allow candidates to showcase their soft skills and cultural fit.

What to demonstrate

  • Interviews that allow candidates to showcase their soft skills and cultural fit
  • Depth in C

How to prepare

  • Prepare three examples from your own work, each with a decision you made and an outcome you can quantify.
  • Re-read the description of the behavioral interviews above and write down what you would ask to confirm before it.

Where candidates lose points

Know your technologies

Be prepared to discuss the technologies and languages listed in your resume. Familiarity with recent projects and experiences will strengthen your candidacy.

Practice coding

Use online platforms to practice coding problems relevant to the languages and frameworks you will be tested on.

Emphasize collaboration

Highlight experiences where you successfully worked in a team. Show how your contributions led to positive outcomes.

Prepare scenarios

Think of examples from your past work experience that demonstrate your problem-solving and communication skills in action.

Questions & practice

Explain the concept of static in C and how the compiler implements it.

Medium · Technical / Domain Questions

Approach

  1. Say what the runtime actually does before reasoning about the code.
  2. Name what is shared across threads and what owns each piece of state.
  3. Identify the window where an invariant is briefly untrue.
  4. Distinguish a value from a reference to it, and say which one you handed out.

Follow-up

  • What happens if two callers reach this at the same time?
  • Where could this allocate more than you expect?

What are the advantages of using a linked list over an array?

Medium · Technical / Domain Questions

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Describe how you would implement a lock in a multi-threaded environment.

Medium · Technical / Domain Questions

Approach

  1. Say what the runtime actually does before reasoning about the code.
  2. Name what is shared across threads and what owns each piece of state.
  3. Identify the window where an invariant is briefly untrue.
  4. Distinguish a value from a reference to it, and say which one you handed out.

Follow-up

  • What happens if two callers reach this at the same time?
  • Where could this allocate more than you expect?

How would you approach writing an algorithm to sort a list of integers?

Medium · Coding / Algorithms

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Explain the complexity of finding an element in a linked list in the worst case.

Medium · Coding / Algorithms

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Can you discuss the vector in C++ and how it differs from arrays?

Medium · Coding / Algorithms

Approach

  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Name the brute-force solution and its complexity before improving on it.
  3. Choose the data structure from the access pattern, not from familiarity.
  4. State the target complexity and say which constraint rules the naive version out.

Follow-up

  • How does this change if the input no longer fits in memory?
  • What is the worst case, and how likely is it on real data?

Replace offset paging on the resource feed with keyset

Easy · keyset pagination · composite index · sort order

resource holds resource_id, tenant_id, owner_user_id, title, body_ref, version, status ('draft','active','archived','deleted'), created_at, updated_at, deleted_at, with an index on (tenant_id, status, updated_at DESC, resource_id DESC). The listing endpoint returns active resources for one tenant, newest update first, 50 per page, today with LIMIT 50 OFFSET n. Tenants reach page 400 and rows are created while they read. Write the keyset query, define what the cursor carries and how it is encoded, and say which part of the index each predicate uses. Assume PostgreSQL 16.

Approach

  1. Name the two failures separately. OFFSET 20000 makes the server produce and discard 20,000 rows, so page cost grows with depth rather than with page size. Independently, any write that changes how many rows sort above the offset moves the window between two fetches, and the direction decides which anomaly you get: an insert lands at the head of updated_at DESC and pushes already-returned rows down past the boundary, so they are returned a second time; a delete above the offset, or a row whose updated_at is bumped above the cursor, pulls rows up and one is never returned at all. Nothing in the response reveals either.
  2. Write the seek: WHERE tenant_id = $1 AND status = 'active' AND (updated_at, resource_id) < ($2, $3) ORDER BY updated_at DESC, resource_id DESC LIMIT 50. The row-value comparison is one index range rather than a disjunction, and both columns are NOT NULL, which is what makes that comparison well defined.
  3. Map each predicate onto the index: tenant_id and status are equality on the leading columns, (updated_at, resource_id) is the range, and the ORDER BY matches the index order so no Sort node appears and the scan stops after 50 rows. The DESC in the definition only matters for mixed directions — a plain ascending btree on the same columns is read backwards for this query.
  4. Put both sort columns in the cursor and nothing the client can tamper with into another tenant: base64 of (updated_at, resource_id), validated server-side, with tenant_id taken from the principal.

Follow-up

  • The client asks for 'jump to page 400'. What do you offer instead, and what does the honest version cost?
  • Sort order becomes user-selectable across four columns. How many indexes is that, and which would you refuse to add?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

  1. Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
  2. Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
  3. Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
  4. State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.

Follow-up

  • A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
  • The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?

Can you write a function that returns both the maximum and minimum values from a set of numbers?

Medium · Technical / Domain Questions

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

What command would you use in Linux to find a string in a file?

Medium · Technical / Domain Questions

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

How do you prioritize tasks when working on multiple projects with tight deadlines?

Medium · Problem-Solving / Case Studies

Approach

  1. Clarify what is being asked and what a complete answer contains.
  2. State your assumptions explicitly before working the problem.
  3. Say what you would check first and why it is the highest-information step.
  4. Work from the requirement backwards to the design.

Follow-up

  • What assumption would you test first?
  • How would you know your answer was wrong?

If you were to design a new feature for an existing application, what steps would you take in your approach?

Medium · Problem-Solving / Case Studies

Approach

  1. Fix the scope first: who calls this, how often, and what they do when it fails.
  2. Name the read and write paths separately; they rarely have the same bottleneck.
  3. Choose a partition key and say what query it makes expensive.
  4. State the consistency you need, and where you are willing to be stale.

Follow-up

  • What breaks first when traffic grows ten times?
  • How does this behave when that dependency is down for an hour?

Read latency spikes on a sixty-second sawtooth

Medium · cache stampede · single-flight · ttl

The cached listing read path serves about 14k reads/second at an 85% hit rate. p99 sits at 35 ms for 57 seconds, jumps to 900 ms for 3, and repeats. During each spike the primary shows several hundred identical listing queries starting within the same millisecond, all carrying one large tenant's id. Cache entries use a 60-second TTL. Give the mechanism, the ordered checks, the fix, and the correctness hazard your fix must not introduce.

Approach

  1. Match the period to a configured number before theorising about load. A spike every 60 seconds against a 60-second TTL is an entry expiring, and you confirm it by correlating spike timestamps with the entry's write time rather than with the traffic curve. If the period had matched a cron or a GC interval instead, this is a different investigation.
  2. Establish the concurrency of the miss. Several hundred identical queries in one millisecond means the miss path has no coalescing: every request that arrives between expiry and repopulation recomputes. The herd size is that key's arrival rate times its recompute time, so at 1.2k reads/second for the hot key and a 250 ms recompute you expect about 300 concurrent misses, which matches what is observed.
  3. Add single-flight on the miss path so one caller per key recomputes under a short-lived lock while the rest wait for its result. Prefer stale-while-revalidate where the read tolerates it: return the expired value immediately and refresh asynchronously, which removes the latency spike rather than serialising it into a queue of waiters.
  4. De-synchronise the keys. Write TTLs with jitter, for example 60 seconds plus or minus 10%, so a deploy or a mass invalidation does not align every key on the same second and turn a per-key herd into a fleet-wide one.

Follow-up

  • The same sawtooth appears on a key that is invalidated on write rather than expired. Is that the same bug?
  • How does your answer change if the recompute takes 4 seconds instead of 250 ms?

Suggested practice checklist

Built from the rounds and topics Binghamton University candidates report.

Day 1 — Map the Binghamton University loop

  • Write out the reported sequence: Initial Screening, Technical Interviews, Behavioral Interviews.
  • For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 3 reported rounds, with the weakest marked.

Day 2 — Work C

  • Spend the session on C, which Binghamton University candidates report being tested on.
  • Write one worked example in C and time yourself on it.

Deliverable: One timed worked example in C.

Day 3 — Work Condition variables

  • Spend the session on Condition variables, which Binghamton University candidates report being tested on.
  • Write one worked example in Condition variables and time yourself on it.

Deliverable: One timed worked example in Condition variables.

Day 4 — Work Thread synchronization

  • Spend the session on Thread synchronization, which Binghamton University candidates report being tested on.
  • Write one worked example in Thread synchronization and time yourself on it.

Deliverable: One timed worked example in Thread synchronization.

Day 5 — Answer out loud: Technical / Domain Questions

  • Answer aloud, timed: Explain the concept of static in C and how the compiler implements it.
  • Answer aloud, timed: Can you write a function that returns both the maximum and minimum values from a set of numbers?

Deliverable: Spoken answers to 2 reported Technical / Domain Questions question(s), under time.

Day 6 — Answer out loud: Problem-Solving / Case Studies

  • Answer aloud, timed: Describe a time when you had to debug a complex software issue. What approach did you take?
  • Answer aloud, timed: How do you prioritize tasks when working on multiple projects with tight deadlines?

Deliverable: Spoken answers to 2 reported Problem-Solving / Case Studies question(s), under time.

Day 7 — Answer out loud: Behavioral / Leadership

  • Answer aloud, timed: Share an experience where you had to collaborate with a team to achieve a common goal. What role did you play?
  • Answer aloud, timed: How do you handle feedback and criticism regarding your work?

Deliverable: Spoken answers to 2 reported Behavioral / Leadership question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Describe a time when you had to debug a complex software issue. What approach did you take?

Medium · Problem-Solving / Case Studies

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Share an experience where you had to collaborate with a team to achieve a common goal. What role did you play?

Medium · Behavioral / Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How do you handle feedback and criticism regarding your work?

Medium · Behavioral / Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

What motivates you to work as a Software Engineer at an academic institution?

Medium · Behavioral / Leadership

Approach

  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Give the blast radius: what could have broken, and what you measured.
  4. Name the disagreement and how you resolved it with evidence.

Follow-up

  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?