Baily Garner Software Engineer Interview Guide

The 60-second brief

At Baily Garner, the Software Engineer role is central to our mission of delivering high-quality, sustainable solutions within the built environment. You will be tasked with developing and maintaining the technical infrastructure that supports our multidisciplinary project teams. Your work directly influences how we optimize building services, streamline engineering workflows, and provide digital solutions that improve efficiency across our portfolio. This role requires a balance of technical rigor and a deep understanding of the engineering lifecycle. You will not just be writing code; you will be solving complex, real-world problems that intersect with mechanical and electrical engineering disciplines.

This guide is scoped to a Software Engineer candidate at Baily Garner.

Focus areas

• Software Engineering
• Mechanical Engineering (Building Services)
• Building Services Engineering

The Baily Garner interview process

Baily Garner candidates report 5 rounds over 4-6 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

The process begins with an initial screening to assess candidate fit.

What to demonstrate

• The process begins with an initial screening to assess candidate fit
• Depth in Software Engineering

How to prepare

• Be able to walk your CV end to end in two minutes, and say why this company specifically.
• Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Assessment

Candidates undergo deeper technical assessments to evaluate their skills.

What to demonstrate

• Candidates undergo deeper technical assessments to evaluate their skills
• Depth in Software Engineering

How to prepare

• Answer aloud and timed: How do you keep your technical skills current with industry standards in the UK?
• Answer aloud and timed: Describe a time you had to optimize a piece of software to improve performance or reliability.

Behavioral Assessment

Behavioral assessments focus on past experiences and approaches to challenges.

What to demonstrate

• Behavioral assessments focus on past experiences and approaches to challenges
• Depth in Software Engineering

How to prepare

• Prepare three examples from your own work, each with a decision you made and an outcome you can quantify.
• Re-read the description of the behavioral assessment above and write down what you would ask to confirm before it.

Engagement with Team

Candidates interact with technical leadership and potential team members.

What to demonstrate

• Candidates interact with technical leadership and potential team members
• Depth in Software Engineering

How to prepare

• Answer aloud and timed: Tell us about a time you identified a flaw in a process and took the initiative to improve it.
• Answer aloud and timed: How do you approach feedback, both when giving it to peers and receiving it from management?

Final Discussions

The process concludes with final discussions to ensure mutual fit.

What to demonstrate

• The process concludes with final discussions to ensure mutual fit
• Depth in Software Engineering

How to prepare

• Work Software Engineering until you can explain it without notes
• Work Mechanical Engineering (Building Services) until you can explain it without notes

Where candidates lose points

Structure your answers

When answering behavioral questions, use the STAR method (Situation, Task, Action, Result) to keep your responses concise and impactful.

Understand the firm

Spend time researching Baily Garner and our commitment to sustainable, high-quality building services to better tailor your answers.

Ask thoughtful questions

Use your interview time to ask about our development culture and how the software team supports our broader engineering initiatives.

Be honest about your experience

If you are unfamiliar with a specific tool, explain how you have learned new technologies in the past.

Questions & practice

Find overlapping job attempts and peak concurrency from lease records

Medium · sweep line · intervals · leases

A day of job_run history yields about 50,000,000 attempt records: (job_run_id, job_type, attempt, started_at, finished_at which is NULL when the worker died, lease_expires_at). Leases expire on a clock, so a job that outran its lease ran twice. Produce (a) every job_run_id whose attempts overlapped in wall-clock time and (b) the peak number of simultaneously running attempts per job_type with the minute it occurred. Target O(n log n). State how you treat a NULL finished_at and what clock skew does to your answer.

Approach

1. Define the interval before sorting anything: an attempt occupies [started_at, COALESCE(finished_at, lease_expires_at)). finished_at is observed and lease_expires_at is only a promise, so every attempt without a finish contributes an estimate and the whole result is a lower bound on overlap rather than an exact count.
2. For peak concurrency, sweep: emit 2n endpoints, sort by (timestamp, kind) with ends ordered before starts at equal timestamps, then walk the sequence maintaining a counter per job_type and record each type's maximum with its timestamp. O(n log n) dominated by the sort, O(n) space, or O(1) extra if the sort is external and the walk streams.
3. For overlap detection, do not compare attempts pairwise. A single global sort by (job_run_id, started_at) gives both the grouping and the order; within a group, keep the maximum end seen so far and report an overlap exactly when the next start is less than that running maximum, which is one linear pass after the sort.
4. Half-open intervals matter and are easy to get wrong: with closed intervals an attempt ending at the same millisecond another begins reads as concurrency two, and across 50,000,000 records that artefact swamps the real signal.

Follow-up

• A handler is not idempotent and you have found 400 overlapping jobs. Which of them actually caused damage, and what would you query to find out?
• Peak concurrency for one job_type is 4 against a configured cap of 4. Is the cap working, or is the data hiding attempts that never started?

Identify the heaviest tenants in a five-minute window under memory pressure

Medium · top-k · heavy hitters · streaming

The edge service handles about 3,000 requests per second across roughly 50,000 tenants, peaking near 9,000. Expose the 50 heaviest tenants by request count over the trailing five minutes so limits can be tightened before one tenant's backfill starves the fleet. You may not retain five minutes of raw records. Give the exact solution and its memory, then the bounded-memory approximation with its error stated as a formula, and say which you would ship and at what tenant cardinality that choice changes.

Approach

1. Do the exact version first, because it is affordable at this cardinality: a ring of 300 one-second counters per tenant, advanced lazily, is 1,200 bytes of counters per tenant and roughly 60 to 90 MB for 50,000 tenants with overhead. Carry a running total and subtract the bucket you overwrite so a window read is O(1) rather than 300 adds.
2. Extract the top 50 with a size-k min-heap over the tenant sums: O(d log k) for d tenants, against O(d log d) to sort them all. Maintaining the heap continuously instead of on query requires a tenant-to-heap-index map, because incrementing a count already inside the heap means sifting from a known position, and without that map you rebuild the heap on every request.
3. State the approximation precisely rather than gesturing at sketches. Misra-Gries with m counters retains every item whose true count exceeds N/(m+1), and each retained count underestimates the truth by at most N/(m+1). With m = 1,000 and N = 900,000 requests in the window the error is roughly 900 requests, which is fine for spotting a tenant sending 50,000 and useless for ranking two tenants 200 apart.
4. Say what breaks when the window slides: Misra-Gries and Space-Saving are insert-only and cannot be decremented as records age out. The workable construction is one summary per sub-window, say ten seconds, with 30 summaries merged at query time, and the merged error is the sum of the per-summary errors, so the bound degrades linearly in the number of sub-windows.

Follow-up

• The heaviest tenant is heavy because of one export job rather than user traffic. Should the limiter treat those as the same tenant?
• Two tenants sit tied at the boundary of the top 50. Does your answer flap, and does the flapping matter?

Diff a projection against the primary without per-row point reads

Hard · reconciliation · range hashing · throttling

The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.

Approach

1. Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
2. Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
3. For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
4. Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.

Follow-up

• The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
• Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

1. Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
2. Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
3. Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
4. State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.

Follow-up

• A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
• The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

1. One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
2. Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
3. State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
4. Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.

Follow-up

• A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
• Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?

How do you ensure your code is maintainable and scalable within a multidisciplinary environment?

Medium · Technical and Domain Knowledge

Approach

1. Fix the scope first: who calls this, how often, and what they do when it fails.
2. Name the read and write paths separately; they rarely have the same bottleneck.
3. Choose a partition key and say what query it makes expensive.
4. State the consistency you need, and where you are willing to be stale.

Follow-up

• What breaks first when traffic grows ten times?
• How does this behave when that dependency is down for an hour?

How do you keep your technical skills current with industry standards in the UK?

Medium · Technical and Domain Knowledge

Approach

1. Clarify what is being asked and what a complete answer contains.
2. State your assumptions explicitly before working the problem.
3. Say what you would check first and why it is the highest-information step.
4. Work from the requirement backwards to the design.

Follow-up

• What assumption would you test first?
• How would you know your answer was wrong?

Can you explain your approach to debugging complex system integration issues?

Medium · Technical and Domain Knowledge

Approach

1. Establish what changed and when, before forming any theory.
2. Pick a bisection that eliminates candidates whichever way it turns out.
3. Check the instrumentation before believing the symptom.
4. Separate the trigger from the cause; the deploy is rarely the bug.

Follow-up

• What would you look at first, and what would it rule out?
• How would you tell a cause from a coincidence here?

Suggested practice checklist

Built from the rounds and topics Baily Garner candidates report.

Day 1 — Map the Baily Garner loop

• Write out the reported sequence: Initial Screening, Technical Assessment, Behavioral Assessment, Engagement with Team, Final Discussions.
• For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 5 reported rounds, with the weakest marked.

Day 2 — Work Software Engineering

• Spend the session on Software Engineering, which Baily Garner candidates report being tested on.
• Write one worked example in Software Engineering and time yourself on it.

Deliverable: One timed worked example in Software Engineering.

Day 3 — Work Mechanical Engineering (Building Services)

• Spend the session on Mechanical Engineering (Building Services), which Baily Garner candidates report being tested on.
• Write one worked example in Mechanical Engineering (Building Services) and time yourself on it.

Deliverable: One timed worked example in Mechanical Engineering (Building Services).

Day 4 — Work Building Services Engineering

• Spend the session on Building Services Engineering, which Baily Garner candidates report being tested on.
• Write one worked example in Building Services Engineering and time yourself on it.

Deliverable: One timed worked example in Building Services Engineering.

Day 5 — Answer out loud: Technical and Domain Knowledge

• Answer aloud, timed: How do you ensure your code is maintainable and scalable within a multidisciplinary environment?
• Answer aloud, timed: Can you explain your approach to debugging complex system integration issues?

Deliverable: Spoken answers to 2 reported Technical and Domain Knowledge question(s), under time.

Day 6 — Answer out loud: Behavioral and Collaborative Skills

• Answer aloud, timed: Describe a time you had to work with a team of mechanical or electrical engineers to solve a project bottleneck.
• Answer aloud, timed: How do you handle conflicting priorities when working on multiple engineering deliverables?

Deliverable: Spoken answers to 2 reported Behavioral and Collaborative Skills question(s), under time.

Day 7 — Dry run for Baily Garner

• Run one full mock under time, then write down the two questions you most want to ask your interviewers.

Deliverable: A completed timed mock and two questions to ask.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Describe a time you had to optimize a piece of software to improve performance or reliability.

Medium · Technical and Domain Knowledge

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Describe a time you had to work with a team of mechanical or electrical engineers to solve a project bottlenec

Medium · Behavioral and Collaborative Skills

Describe a time you had to work with a team of mechanical or electrical engineers to solve a project bottleneck.

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

How do you handle conflicting priorities when working on multiple engineering deliverables?

Medium · Behavioral and Collaborative Skills

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Tell us about a time you identified a flaw in a process and took the initiative to improve it.

Medium · Behavioral and Collaborative Skills

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

How do you approach feedback, both when giving it to peers and receiving it from management?

Medium · Behavioral and Collaborative Skills

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Give the blast radius: what could have broken, and what you measured.
4. Name the disagreement and how you resolved it with evidence.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?