Interview guides · AtkinsRéalis

AtkinsRéalis Software Engineer Interview Guide

AtkinsRéalis Software Engineer interview guide: reported rounds, questions and how candidates describe the process.

The 60-second brief

AtkinsRéalis hires Software Engineers; this guide collects what candidates report about the process.

This guide is scoped to a Software Engineer candidate at AtkinsRéalis.

Focus areas

Water Resources Engineering Domain Knowledge
Environmental Engineering Domain Knowledge
Power Systems Engineering Concepts

The AtkinsRéalis interview process

AtkinsRéalis candidates report 4 rounds over 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

Gauge your technical background and interest in the company.

What to demonstrate

Gauge your technical background and interest in the company
Depth in Water Resources Engineering Domain Knowledge

How to prepare

Be able to walk your CV end to end in two minutes, and say why this company specifically.
Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.

Technical Assessments

Deeper technical assessments focusing on role-related scenarios.

What to demonstrate

Deeper technical assessments focusing on role-related scenarios
Depth in Water Resources Engineering Domain Knowledge

How to prepare

Answer aloud and timed: What is your process for validating technical requirements before beginning a development task?
Answer aloud and timed: How do you approach integrating software solutions with existing legacy systems?

Behavioral Discussions

Discuss past projects and soft skills in a structured manner.

What to demonstrate

Discuss past projects and soft skills in a structured manner
Depth in Water Resources Engineering Domain Knowledge

How to prepare

Prepare three examples from your own work, each with a decision you made and an outcome you can quantify.
Re-read the description of the behavioral discussions above and write down what you would ask to confirm before it.

Final Assessment

Conversations transition to specific, role-related technical scenarios.

What to demonstrate

Conversations transition to specific, role-related technical scenarios
Depth in Water Resources Engineering Domain Knowledge

How to prepare

Answer aloud and timed: Walk me through your approach to designing a new feature from initial requirement to deployment.
Answer aloud and timed: How do you handle conflicting technical feedback from stakeholders or project leads?

Where candidates lose points

Understand the industry

Research the specific sector you are applying to (e.g., Water, Power, or Industrial) and understand the current trends and challenges in that space.

Structure your answers

Use the STAR method (Situation, Task, Action, Result) to keep your behavioral answers focused and impactful.

Highlight your impact

Don't just list what you did; explain the value your work provided to your previous team or project.

Show curiosity

Ask thoughtful questions about how the engineering team approaches innovation or handles cross-functional collaboration.

Questions & practice

Identify the heaviest tenants in a five-minute window under memory pressure

Medium · top-k · heavy hitters · streaming

The edge service handles about 3,000 requests per second across roughly 50,000 tenants, peaking near 9,000. Expose the 50 heaviest tenants by request count over the trailing five minutes so limits can be tightened before one tenant's backfill starves the fleet. You may not retain five minutes of raw records. Give the exact solution and its memory, then the bounded-memory approximation with its error stated as a formula, and say which you would ship and at what tenant cardinality that choice changes.

Approach

Do the exact version first, because it is affordable at this cardinality: a ring of 300 one-second counters per tenant, advanced lazily, is 1,200 bytes of counters per tenant and roughly 60 to 90 MB for 50,000 tenants with overhead. Carry a running total and subtract the bucket you overwrite so a window read is O(1) rather than 300 adds.
Extract the top 50 with a size-k min-heap over the tenant sums: O(d log k) for d tenants, against O(d log d) to sort them all. Maintaining the heap continuously instead of on query requires a tenant-to-heap-index map, because incrementing a count already inside the heap means sifting from a known position, and without that map you rebuild the heap on every request.
State the approximation precisely rather than gesturing at sketches. Misra-Gries with m counters retains every item whose true count exceeds N/(m+1), and each retained count underestimates the truth by at most N/(m+1). With m = 1,000 and N = 900,000 requests in the window the error is roughly 900 requests, which is fine for spotting a tenant sending 50,000 and useless for ranking two tenants 200 apart.
Say what breaks when the window slides: Misra-Gries and Space-Saving are insert-only and cannot be decremented as records age out. The workable construction is one summary per sub-window, say ten seconds, with 30 summaries merged at query time, and the merged error is the sum of the per-summary errors, so the bound degrades linearly in the number of sub-windows.

Follow-up

The heaviest tenant is heavy because of one export job rather than user traffic. Should the limiter treat those as the same tenant?
Two tenants sit tied at the boundary of the top 50. Does your answer flap, and does the flapping matter?

Collapse a redelivered event batch into per-aggregate high-water marks

Easy · hashing · at-least-once · aggregation

You drain a batch of up to 5,000,000 events, each (aggregate_id BIGINT, aggregate_version INT, event_type, payload). The log guarantees order within one aggregate only; the batch merges 64 partitions, and a relay failover has redelivered a range, so an older version for an aggregate can appear after a newer one. Given a map of last_applied_version per aggregate, produce the events worth applying, at most one per (aggregate_id, version), plus the count discarded. Target O(n) time. State the memory for 2,000,000 distinct aggregates and what you do when it does not fit.

Approach

One pass, one hash map from aggregate_id to the highest version kept, and a discard counter. An event whose version is at or below last_applied_version for its aggregate is dropped without further work, which is the whole reason the event carries its version rather than a delta. O(n) expected time, O(d) space in distinct aggregates.
Keep the maximum, never the last occurrence. The redelivered range means the final appearance of an aggregate in the batch can be an older version than one seen earlier in the same batch, so last-wins applies stale state over newer state and the projection regresses with no error anywhere.
Cost the memory instead of calling it large: an 8-byte key plus a 4-byte version is 12 bytes of payload, and an open-addressed table held at a 0.7 load factor costs roughly 17 bytes per entry before per-slot metadata, so 2,000,000 aggregates is tens of megabytes in a native layout and several times that in a runtime that boxes both key and value.
If the distinct set exceeds memory, partition on hash(aggregate_id) mod P and reduce each partition independently. Every event for one aggregate hashes to the same partition, so the per-partition result is exact and the merge is concatenation rather than a second reduction.

Follow-up

The payload is a patch rather than a snapshot, so applying only the highest version loses the intermediate changes. What changes in your reduction?
How do you detect that version 7 arrived while version 6 was never delivered, and what should the consumer do about the gap?

Canonicalise a request body into a stable idempotency fingerprint

Medium · parsing · canonicalisation · hashing

idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.

Approach

Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.

Follow-up

A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
Where does the fingerprint get computed relative to request decompression and the body-size limit?

Stop tag and share joins from fanning out a page

Medium · join fan-out · semi-joins · many-to-many

resource_tag is (resource_id, tag_id) with PK (resource_id, tag_id); resource_share is (resource_id, shared_with_user_id, permission). The tagged-and-shared listing inner-joins resource to both, filters tenant_id, tag_id = ANY($2) and shared_with_user_id = $3, orders by updated_at DESC and takes 50. Pages come back with fewer than 50 distinct resources and the total in the header is far too high. Explain the row multiplication, rewrite both the page query and the count query so each is correct, and name the index each one needs. PostgreSQL 16.

Approach

Do the arithmetic against the predicates that are actually there. An inner join emits one row per matching child row, and both joins are filtered: tag_id = ANY($2) admits only the requested tags, shared_with_user_id = $3 admits one user's share rows. So a resource holding three of the requested tags and shared with $3 once yields three rows, not one — the multiplier is its count of matching tags times its share rows for that single user, and that second factor is 1 unless the table admits duplicate (resource_id, shared_with_user_id) pairs. LIMIT 50 then limits rows rather than resources, and COUNT(*) counts pairs — the header is the product, not the population.
Reject DISTINCT as the fix. It deduplicates after the product has been built, so the planner must materialise and sort the fanned-out set before the LIMIT can apply, and it leaves any SUM or AVG in the same select list wrong.
Rewrite both filters as semi-joins, keeping resource as the only row source: AND EXISTS (SELECT 1 FROM resource_tag rt WHERE rt.resource_id = r.resource_id AND rt.tag_id = ANY($2)) and the same shape against resource_share. A semi-join stops at the first match per resource and preserves the driving index order, so ORDER BY updated_at DESC, resource_id DESC LIMIT 50 still stops after 50 rows.
Count with the same predicates and no join at all: SELECT count(*) FROM resource r WHERE r.tenant_id = $1 AND r.status = 'active' AND EXISTS (...) AND EXISTS (...). Nothing multiplies a resource, so the number is the population.

Follow-up

The filter changes from 'any of these tags' to 'all of these tags'. Rewrite it and state what it costs relative to the ANY form.
A resource can be shared with the same user twice under different permissions. Does your count change, and should it?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.

Follow-up

A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?

Can you describe a complex technical problem you solved using software or data analysis?

Medium · Technical and Domain Proficiency

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

How do you ensure your code or models are scalable and maintainable for long-term infrastructure projects?

Medium · Technical and Domain Proficiency

Approach

Fix the scope first: who calls this, how often, and what they do when it fails.
Name the read and write paths separately; they rarely have the same bottleneck.
Choose a partition key and say what query it makes expensive.
State the consistency you need, and where you are willing to be stale.

Follow-up

What breaks first when traffic grows ten times?
How does this behave when that dependency is down for an hour?

What is your process for validating technical requirements before beginning a development task?

Medium · Technical and Domain Proficiency

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

How do you approach integrating software solutions with existing legacy systems?

Medium · Technical and Domain Proficiency

Approach

Say who the caller is and what they do when the call fails halfway.
Define the identity of a request so a retry cannot double-apply it.
Separate accepted, pending, failed and confirmed; they are different facts.
Design the error taxonomy before the success shape; callers branch on it.

Follow-up

What happens if the caller retries after a timeout?
How does a client discover it is on an old version of this contract?

How do you balance the need for innovative technical solutions with the strict safety and compliance standards

Medium · Problem-Solving and Methodology

How do you balance the need for innovative technical solutions with the strict safety and compliance standards of our industry?

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Walk me through your approach to designing a new feature from initial requirement to deployment.

Medium · Problem-Solving and Methodology

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Read latency spikes on a sixty-second sawtooth

Medium · cache stampede · single-flight · ttl

The cached listing read path serves about 14k reads/second at an 85% hit rate. p99 sits at 35 ms for 57 seconds, jumps to 900 ms for 3, and repeats. During each spike the primary shows several hundred identical listing queries starting within the same millisecond, all carrying one large tenant's id. Cache entries use a 60-second TTL. Give the mechanism, the ordered checks, the fix, and the correctness hazard your fix must not introduce.

Approach

Match the period to a configured number before theorising about load. A spike every 60 seconds against a 60-second TTL is an entry expiring, and you confirm it by correlating spike timestamps with the entry's write time rather than with the traffic curve. If the period had matched a cron or a GC interval instead, this is a different investigation.
Establish the concurrency of the miss. Several hundred identical queries in one millisecond means the miss path has no coalescing: every request that arrives between expiry and repopulation recomputes. The herd size is that key's arrival rate times its recompute time, so at 1.2k reads/second for the hot key and a 250 ms recompute you expect about 300 concurrent misses, which matches what is observed.
Add single-flight on the miss path so one caller per key recomputes under a short-lived lock while the rest wait for its result. Prefer stale-while-revalidate where the read tolerates it: return the expired value immediately and refresh asynchronously, which removes the latency spike rather than serialising it into a queue of waiters.
De-synchronise the keys. Write TTLs with jitter, for example 60 seconds plus or minus 10%, so a deploy or a mass invalidation does not align every key on the same second and turn a per-key herd into a fleet-wide one.

Follow-up

The same sawtooth appears on a key that is invalidated on write rather than expired. Is that the same bug?
How does your answer change if the recompute takes 4 seconds instead of 250 ms?

Suggested practice checklist

Built from the rounds and topics AtkinsRéalis candidates report.

Day 1 — Map the AtkinsRéalis loop

Write out the reported sequence: Initial Screening, Technical Assessments, Behavioral Discussions, Final Assessment.
For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.

Deliverable: A one-page map of the 4 reported rounds, with the weakest marked.

Day 2 — Work Water Resources Engineering Domain Knowledge

Spend the session on Water Resources Engineering Domain Knowledge, which AtkinsRéalis candidates report being tested on.
Write one worked example in Water Resources Engineering Domain Knowledge and time yourself on it.

Deliverable: One timed worked example in Water Resources Engineering Domain Knowledge.

Day 3 — Work Environmental Engineering Domain Knowledge

Spend the session on Environmental Engineering Domain Knowledge, which AtkinsRéalis candidates report being tested on.
Write one worked example in Environmental Engineering Domain Knowledge and time yourself on it.

Deliverable: One timed worked example in Environmental Engineering Domain Knowledge.

Day 4 — Work Power Systems Engineering Concepts

Spend the session on Power Systems Engineering Concepts, which AtkinsRéalis candidates report being tested on.
Write one worked example in Power Systems Engineering Concepts and time yourself on it.

Deliverable: One timed worked example in Power Systems Engineering Concepts.

Day 5 — Answer out loud: Technical and Domain Proficiency

Answer aloud, timed: Can you describe a complex technical problem you solved using software or data analysis?
Answer aloud, timed: How do you ensure your code or models are scalable and maintainable for long-term infrastructure projects?

Deliverable: Spoken answers to 2 reported Technical and Domain Proficiency question(s), under time.

Day 6 — Answer out loud: Problem-Solving and Methodology

Answer aloud, timed: Describe a time you had to troubleshoot a system failure under tight deadlines.
Answer aloud, timed: How do you balance the need for innovative technical solutions with the strict safety and compliance standards of our industry?

Deliverable: Spoken answers to 2 reported Problem-Solving and Methodology question(s), under time.

Day 7 — Answer out loud: Behavioral and Cultural Alignment

Answer aloud, timed: Tell me about a time you had to explain a highly technical concept to a non-technical stakeholder.
Answer aloud, timed: How do you manage your time when juggling multiple project deliverables?

Deliverable: Spoken answers to 2 reported Behavioral and Cultural Alignment question(s), under time.

Behavioural preparation

Behavioural rounds judge the decision you made and what it cost.

Describe a time you had to troubleshoot a system failure under tight deadlines.

Medium · Problem-Solving and Methodology

Approach

Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

How do you handle conflicting technical feedback from stakeholders or project leads?

Medium · Problem-Solving and Methodology

Approach

Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

Tell me about a time you had to explain a highly technical concept to a non-technical stakeholder.

Medium · Behavioral and Cultural Alignment

Approach

Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

How do you manage your time when juggling multiple project deliverables?

Medium · Behavioral and Cultural Alignment

Approach

Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

Describe a situation where you had to work with a cross-functional team to meet a shared goal.

Medium · Behavioral and Cultural Alignment

Approach

Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

What motivates you to work on large-scale infrastructure and engineering challenges?

Medium · Behavioral and Cultural Alignment

Approach

Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?