Interview guides · Astro Digital

Astro Digital Software Engineer Interview Questions & Guide 2026

Astro Digital software engineer prep on databases: indexes, query plans, and the anomalies an isolation level still permits.

The 60-second brief

A Software Engineer at Astro Digital serves as a bridge between complex satellite hardware and the data-driven insights Astro Digital's customers rely on. You are not just writing code; you are building the software infrastructure that powers NewSpace technology, enabling reliable satellite operations, ground system communications, and mission-critical data processing.

Scope in the operational half of the job when the seat carries on-call. Rollout, rollback and what you would put on a dashboard belong inside a design answer rather than after it, and an answer that never reaches them reads as someone who has built systems but not run them.

Focus areas

Keep money in integer minor units
Scope every query and cache key by tenant
Bound blast radius with per-tenant concurrency limits

Overview

The role demands a blend of rigorous engineering discipline and the agility required to thrive in a fast-paced, startup-oriented environment. Whether you are optimizing spacecraft operations or developing ground systems, your work directly affects the success of Astro Digital's satellite missions. You will contribute to a culture that values technical depth, mission-focused problem solving, and a genuine passion for the aerospace industry.

The Astro Digital interview process

Astro Digital candidates report 3 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

The person on this call usually cannot evaluate your code and does not need to. They write a short paragraph, and that paragraph is what a hiring manager skims when deciding who to put on your loop. So the test is not whether your work was hard, it is whether a non-engineer can repeat it correctly. Name systems by what they did rather than by their internal codename, give each project a shape (what was breaking, what you changed, what happened after), and keep the whole walkthrough near ninety seconds. Depth that cannot survive a paraphrase reads as vagueness.

What to demonstrate

Whether a non-engineer can restate your projects without distorting them, since their paraphrase is what travels to the hiring manager, not your sentences
Whether each project has a shape rather than a stack list: the failure or constraint, the change you made, the result and how it was measured
Whether you can say what was yours inside a team project without either inflating it or disappearing into the plural

How to prepare

Rewrite each headline project as two sentences with no internal system names and no acronyms outside your company, then say them to someone outside engineering and have them repeat them back. Fix whatever came back wrong
Attach one measured number to each project: the baseline, the change, and the window it was measured over. Where nothing was ever measured, say that plainly rather than reaching for a plausible percentage
Time the background walkthrough against a clock. If it runs past two minutes, compress the earliest role to a single clause and spend the recovered time on the most recent one

Technical Panels

A day like this is several different games in a row, and the expensive mistake is carrying the previous one into the next room. Coding rewards narrow precision and finishing inside a timer. Design rewards breadth, stated assumptions and naming what you are deliberately not building. Behavioural rewards specificity about people and decisions. Candidates who over-engineer a coding problem they were supposed to finish, or who start sketching class hierarchies before anyone has agreed what the system has to do, are usually still playing the last round. Between rooms, name out loud which game the next one is.

What to demonstrate

Whether the coding round ends with something that runs and has been traced against a degenerate input, rather than an extensible design that was never finished
Whether a design discussion opens by agreeing on traffic shape, read-to-write ratio and what is allowed to be stale, instead of proceeding from an architecture you arrived with
Whether a behavioural answer names a person, a disagreement and what you did about it, rather than describing the system the story happened inside
Whether the opening habits still appear late in the day: restating the problem, asking for constraints, saying the plan before typing

How to prepare

Book three mocks of different types back to back on one afternoon and ask each interviewer afterwards which round you answered in the wrong mode
Write a three-line opening script per round type — coding: restate, name the approach and its cost, then type; design: ask for scale, read-write mix and what must not break; behavioural: name the person, the stakes and the decision — and run it off a card so the switch is mechanical rather than remembered
Practise coding with a timer you do not extend, stopping when it stops, so the trained reflex is to finish a correct solution rather than to keep improving one

Final Leadership Discussions

Nobody in the room with you decides this. Interviewers typically write their rounds up separately, often before seeing anyone else's, and the outcome is settled later from those write-ups. A split panel gets resolved by whichever note carries specific evidence, so what you want out of each room is one concrete thing that person could write down: a bug you caught yourself, a trade-off you named, a decision you owned. The rest is arithmetic. The project you describe in a behavioural conversation is often the same system you sketched an hour earlier, and the two accounts have to agree.

What to demonstrate

Whether the scale, team size and timeline you attach to a project hold steady when that project resurfaces in a different round
Whether each interviewer leaves with a specific thing to cite rather than a general impression of competence
Whether a trade-off you defended in one round survives a challenge in another, instead of being quietly swapped for the answer the new interviewer seemed to want
Whether a question you have already answered earlier in the day gets the same answer at the same depth, without visible impatience

How to prepare

Write a one-page sheet per project fixing the figures you will quote — request volume, data size, team size, elapsed time, what broke — and say them aloud from the sheet until they come out identical every time
For each round on the schedule, decide in advance the one sentence you want in that person's notes, then check in a mock that you said it outright instead of leaving it to be inferred
Have someone ask you the same project question twice, an hour apart, and diff the two answers for numbers that moved or a trade-off that reversed

Where candidates lose points

Treating a timed-out write as a failed write

A timeout says the response did not arrive, not that the work did not happen; the server may well have committed and then lost the connection. Retrying a non-idempotent create after a timeout is the standard way to end up with two of something, and those duplicates land precisely when the system is already degraded and least able to absorb them. The discipline is to treat a timeout as unknown: either the write carries an idempotency key so the retry is safe by construction, or the client re-reads authoritative state before deciding what to do, and the interface says unknown rather than showing a failure that invites a second click.

Paginating a growing table with limit and offset

Two unrelated defects share the idiom. Correctness: rows inserted or deleted between page requests shift the window, so a consumer walking an export skips rows and sees others twice, which for a customer-facing sync is silent data loss rather than an error anyone notices. Cost: the database still produces and discards the skipped rows, so page N costs time proportional to N times the page size and a deep page on a large table degrades from milliseconds to seconds. Keyset pagination over a stable, unique, indexed ordering -- where (created_at, id) < ($1, $2) order by created_at desc, id desc limit $3 -- is constant-cost per page and immune to shifting, on the precondition that the cursor columns never change value for a row, which disqualifies updated_at as a cursor.

Quoting amortised or average cost as if it were a worst-case guarantee

Appending to a dynamic array is amortised O(1), but the append that triggers a resize copies every element, and hash lookup is constant only while the hash spreads the actual keys. Say which guarantee you are offering when the caller cares about the latency of one call rather than the total over many.

Assuming the input fits in memory

Ask how large the input is in bytes before committing to an in-memory algorithm; beyond that point the options are a single streaming pass, an external sort with bounded buffers, or a sketch that trades exactness for constant memory. An algorithm that assumes random access to the whole input is a different algorithm from one that sees each element once.

Questions & practice

Seal an hour under late data with bounded memory

Hard · watermarks · late-data · quantile-sketch · conditional-write

Metering ingest reads 256 partitions at 10,000 to 40,000 events/second. Events carry occurred_at and ingested_at, and during a producer replay the gap between them is hours. Seal each UTC hour once no more than 50 parts per million of that hour's eventual quantity can still arrive, using memory that does not grow with the size of the replay. Define the watermark, the lateness parameter and how you measure it, the structure holding open hours, and the write that performs the seal. State what an idle partition does to your watermark.

Approach

Two clocks, two jobs. Bucket by occurred_at, because that is the hour the customer is billed for, and advance the watermark on ingested_at, because that is what the fold has consumed and what source_max_ingested_at records. Conflating them is what makes late data invisible.
The global watermark is the min over partitions of each partition's committed ingested_at, not the max: the fold is trustworthy only as far as the slowest partition. The consequence is that one idle partition pins the watermark forever and nothing seals, so an idle partition must promote its watermark to wall clock after a stated idle timeout, and that timeout becomes a correctness parameter, because a partition that is slow rather than idle gets sealed past.
Choose the lateness L from the measured distribution of ingested_at - occurred_at, weighted by quantity rather than by event count. The target is 50 ppm of the hour's quantity, and a replay is rare in events while carrying disproportionate mass, so an event-weighted quantile picks an L that is comfortably wrong at exactly the moment it matters.
Measure that quantile in bounded memory. A Greenwald-Khanna summary gives epsilon-approximate quantiles in O((1/epsilon) log(epsilon n)) space; a t-digest costs more per merge but has relative error that tightens at the tails, which is the half of the distribution you are reading at p99.99. Keep a separate summary per tenant class, because one tenant's batch importer is not the population.
Hold open hours in a min-heap keyed by hour_start. When the watermark advances, pop every hour with hour_end + L < W and seal it: O(log H_open) per advance and O(1) amortised per event to touch its bucket. Memory is open hours multiplied by distinct (tenant, workspace, sku) keys, so cap the number of simultaneously open hours and spill the oldest into usage_rollup_hourly as status='open' with a revision bump. While an hour is open the row is upsertable, so the store is your overflow.
The seal itself is a conditional write: update ... set status='sealed', sealed_at=now() where status='open' returning .... Two sealers race on every restart, and the loser must see zero rows and stop rather than write a second value. After the seal, an event for that hour is not an upsert but an adjustment, and source_max_ingested_at is what proves it arrived afterwards.

Worked solution (40 min)

Replay a day of events with a synthetic lateness distribution: 99.9% under two minutes, plus a 0.05% tail at four to six hours that carries 3% of total quantity.
Compute the p99.99 lateness two ways, event-weighted and quantity-weighted, and put the two numbers side by side.
Implement the min-heap of open hours with the watermark as the min over 256 partitions, then stall one partition for 20 minutes and observe what seals.
Set the idle-partition timeout to 60 seconds, repeat the stall, and measure how much quantity arrives after the seal.
Attempt the seal from two workers at once and confirm the conditional update lets exactly one through.

Expected result: The quantity-weighted p99.99 is hours larger than the event-weighted one. Choosing L from the event-weighted number lets roughly the tail's 3% of quantity land after the seal, 600 times the 50 ppm target. With the min watermark and no idle timeout, the stalled partition blocks all sealing; with a 60-second timeout, the stall is sealed past and its events arrive late.

Verify it yourself

Post-seal quantity as a fraction of the hour's total is at or below 50 ppm at the chosen L, measured rather than assumed.
The second sealer's update reports zero rows affected and writes nothing.
Heap size equals the number of open hours and does not grow with the replay's event count.

Follow-up

A replay starts during the sealing window for a period you are about to close. What do you do, and what is the customer-visible consequence of each option?
Your measured quantity-weighted p99.99 lateness is six hours and the invoice must be issued at 02:00 UTC on the first. How do you reconcile those two numbers?
How would you detect that L has drifted before it costs you an hour's quantity?

Find peak concurrent sandbox usage from run intervals

Medium · sweep-line · intervals · concurrency-caps · null-semantics

Given up to 5 million job_run rows for one tenant over one day, with run_id, started_at, finished_at, status and wall_clock_limit_seconds, report the maximum number of sandboxes running at once, the earliest instant that maximum is reached, and the first run_id that would breach a per-tenant cap of C. started_at is null while a run is queued; finished_at is null both for runs still executing and for runs in status lost. Treat a run as occupying [started_at, finished_at). Give the complexity and state how you handle each null.

Approach

Turn each run into two sweep events, (started_at, +1) and (end, -1), then sort the 2n events by timestamp with -1 ordered before +1 at equal timestamps. That tie-break is what makes the interval half-open, so a run finishing at 10:00:00 and one starting at 10:00:00 never overlap.
Decide each null out loud before sweeping, because each choice moves the answer. A null started_at means queued and contributes nothing. A null finished_at with status running or leased is clipped to the window end. Status lost has no observed end at all, so clip it at started_at + wall_clock_limit_seconds on the grounds that the supervisor owns the timeout, and record that you did. The table's check (finished_at is null or started_at is not null) guarantees you never see an end without a start.
Sweep once, maintaining a running counter, the maximum, and the timestamp at which the maximum was first attained (update peak_at only on a strict increase, or you will report the last such instant instead of the earliest). Capture the first run_id whose +1 takes the counter to C+1 during the same sweep rather than in a second pass.
Complexity: O(n log n) dominated by the sort, O(n) space. If rows already arrive ordered by started_at, a min-heap of end times gives O(n log k) time and O(k) space with k the peak concurrency, which is the better shape when the rows come from an index scan on (tenant_id, started_at).
If second resolution is acceptable, counting-sort the endpoints into an 86,400-slot delta array and prefix-sum it: O(n + T) time and O(T) space, which beats the comparison sort at 5 million rows. It answers only at second granularity, so state which resolution the cap is defined in.

Follow-up

Now report peak concurrency per tenant for 10,000 tenants from one globally sorted stream. What changes about memory and about the sort?
The cap has to be enforced at dispatch rather than reported afterwards. What does the admission check look like, and where does it race?
How would you answer 'peak concurrency within any 5-minute window' without re-sorting?

Schedule ordered webhook retries with a heap of subscription queues

Medium · heap · scheduling · backoff · head-of-line-blocking

Design the in-memory scheduler for webhook delivery. Up to 20 million rows sit in status pending or failed_retryable across 200,000 subscriptions, each row carrying next_attempt_at and attempt_count, and each endpoint having a circuit breaker. Deliveries for one subscription must be attempted in order, so at most one attempt per subscription may be in flight. Support due(now), complete(delivery, outcome) and insert(delivery) in O(log S), where S is the subscription count rather than the delivery count. Give the backoff formula you schedule retries with.

Approach

Key the global heap by subscription, not by delivery. Each subscription owns a FIFO of its due deliveries in event order; the heap holds one entry per eligible subscription, keyed by its head's next_attempt_at. That is 200,000 heap entries instead of 20 million, and it makes the one-in-flight rule structural rather than a check somebody can forget.
due(now): peek the minimum. If its key is in the future, sleep until then instead of spinning. Otherwise pop it, move the subscription into an in-flight set, and do not re-push it. A subscription absent from the heap cannot be dispatched twice, which is precisely how ordering is preserved.
complete: on success, drop the head and re-push the subscription keyed by its new head, or leave it out when the queue empties. On a retryable failure, increment attempt_count and set next_attempt_at = now + uniform(0, min(cap, base * 2^attempt)), sampled uniformly across the whole interval. That is full jitter; deterministic backoff re-synchronises the herd you just created.
Circuit breaker: park the subscription in a second heap keyed by its half-open time, so an endpoint dead for six hours costs one heap entry and zero attempts rather than consuming worker slots. Admit exactly one probe at half-open and close the breaker only on its success.
Say the price of the ordering guarantee out loud. One in-flight attempt per subscription means an endpoint answering in 10 seconds drains at 0.1 deliveries/second however many workers you run, and its backlog grows until it recovers. If the customer does not need order, allow k in flight and document delivery as unordered; that is the trade, and it is a product decision.
All three operations are O(log S) with O(S) resident heap memory and the queues themselves backed by the store. The database-backed equivalent is a partial index on (subscription_id, next_attempt_at) where status in ('pending','failed_retryable') claimed with FOR UPDATE SKIP LOCKED, and the write-back must be fenced on lease_token so a worker that stalled and resumed cannot overwrite a newer attempt.

Follow-up

One subscription has 4 million queued deliveries. What stops it from starving the other 199,999, and what does your heap look like under that load?
A customer requests redelivery of last Tuesday's events. Where do those rows enter your structure, and what keeps them from reordering live traffic?
The process restarts. How much state do you rebuild, and what stops every subscription from being attempted in the same second?

Decide which facts an invoice line copies instead of joining

Medium · denormalisation · immutable records · foreign keys · rounding

invoice_line_item already denormalises tenant_id, which is reachable through invoice_id, and stores amount_minor even though quantity times unit_price_micros would recompute it. A reviewer asks you to normalise both away, and separately asks whether the tenant's legal name and billing address should be copied onto the invoice header. Decide each case. For every field you keep denormalised, name the read pattern or the invariant that justifies it, the anomaly the copy can develop, and the mechanism that prevents that anomaly here.

Approach

Split the question into two kinds of copy, because they fail differently. A copy of a currently mutable fact is a cache: it drifts and needs invalidation. A copy of a fact frozen at write time is not a cache at all, it is the record of what happened, and normalising it away destroys information the source no longer holds.
Keep tenant_id on the line. It costs 8 bytes, it leads every index on the table so no read is ever accidentally cross-tenant, and it turns a wrong join into an empty result rather than another tenant's money. Prevent the drift structurally: a unique constraint on invoice (invoice_id, tenant_id) plus a composite foreign key from the line on (invoice_id, tenant_id) makes a mismatched pair impossible, so the database enforces agreement instead of a code review.
Keep amount_minor. Rounding must happen exactly once, at a named site, with a stated mode (half-even here). If readers recompute from quantity and unit_price_micros, every reader owns a rounding decision, and half-up and half-even diverge systematically across thousands of lines rather than cancelling out. A check constraint can bound the stored value but deliberately cannot re-derive it.
Copy the legal name and billing address onto the invoice header, written once and never updated. The statement must show what was true when it was sealed, and the tenant record will change afterwards. This is a snapshot for the same reason source_rollup_watermark is stored per line: without it, nobody can reconstruct what the customer was told.
Name the read pattern that pays for all of it. Rendering, dispute response and export are per-tenant, per-period reads over thousands of lines that would otherwise join back to slowly changing dimensions that no longer hold the historical value. The write side is a once-per-period batch, so the extra columns cost nothing that matters.
Concede the case where the reviewer is right: a mutable operational attribute such as the tenant's current plan name has no business on a line. If a report wants it, join. If a statement needs the plan as of the period, that is another snapshot and it belongs on the header with the rest.

Follow-up

Write the composite foreign key and the unique constraint it requires on the parent. What does it cost on every line insert, and what does it do to a bulk load?
A tenant is renamed after being invoiced. Which rows change, and what does the customer see on last quarter's PDF?
Where does currency live, and what breaks if a tenant's billing currency changes between two periods?

Find the join that inflates every invoice total

Medium · join fan-out · aggregation grain · sql correctness

invoice_line_item holds line_id, invoice_id, tenant_id, sku, rate_tier, quantity, unit_price_micros, amount_minor (bigint), currency, kind, voided_at. invoice_payment_attempt holds attempt_id, invoice_id, tenant_id, amount_minor, status (succeeded, failed, pending), created_at, and an invoice has many attempts. A finance report runs select i.invoice_id, sum(l.amount_minor), count(p.attempt_id) from invoice i join invoice_line_item l using (invoice_id) join invoice_payment_attempt p using (invoice_id) group by 1 and the totals are wrong. Say precisely what the sum now equals, and write a version that is also correct for invoices with zero attempts.

Approach

Compute what the query actually returns before fixing it. The two joins form a Cartesian product per invoice, so each line row repeats once per attempt row: sum(l.amount_minor) is the true total multiplied by the attempt count, and count(p.attempt_id) is attempts times lines. Three lines and two attempts report double the money and six attempts.
Reject the reflex repair. count(distinct p.attempt_id) does fix the count, because attempt_id is unique. sum(distinct l.amount_minor) does not fix the sum, because two legitimate lines with equal amounts collapse into one. DISTINCT inside an aggregate deduplicates values, not rows, and the difference stays invisible until two lines happen to match.
Aggregate each branch to invoice grain before joining: one CTE summing lines by invoice_id, one counting attempts by invoice_id, then join the two results. A LATERAL subquery per invoice is equivalent and sometimes plans better when the outer set is small. Either way every aggregate stays at the grain it was defined at.
Keep invoices with no attempts by making the attempt branch a LEFT JOIN with coalesce(attempt_count, 0). An inner join here silently drops every unpaid invoice, which is usually the exact population finance is asking about.
Push each filter to its own grain: where l.voided_at is null belongs inside the line CTE, not the outer query, or it would also filter the attempt branch through the join. Put the tenant predicate on both branches, since the denormalised tenant_id is what stops a wrong join crossing tenants.
Leave yourself a standing check: an invoice total is a function of its non-voided lines and of nothing about payments, so if changing the payment filter moves the money figure, the fan-out is back.

Worked solution (25 min)

Create one invoice with three lines of 1000, 1000 and 500 minor units and two payment attempts, then run the original query.
Confirm it reports 5000 and 6 rather than 2500 and 2.
Apply sum(distinct l.amount_minor) and confirm the total becomes 1500, which is worse rather than better.
Write the two-CTE version with a LEFT JOIN and coalesce, and confirm 2500 and 2.
Add a second invoice with lines and no attempts and confirm it still appears.

Expected result: The original sum equals the true line total multiplied by the number of payment attempts and the count equals attempts times lines; the corrected query pre-aggregates each branch to invoice grain in separate CTEs and LEFT JOINs them with coalesce, with voided lines excluded inside the line CTE and the tenant predicate applied to both branches.

Verify it yourself

The money total is unchanged by adding or removing payment attempts.
An invoice with zero attempts appears with its total and a zero count.
Two lines with identical amounts both contribute to the total.
Voiding a line changes the money figure and leaves the attempt count alone.

Follow-up

Add a third branch for credit notes applied to the invoice. Does the CTE shape still hold, and when would a single pass with filter (where ...) be better?
Over 500k invoices this report takes minutes. Which grain would you materialise, and how do you keep it correct when a line is voided?
The same report is needed per tenant per month. What index makes the line CTE cheap?

Explain a complex technical challenge you solved and the specific tools you utilized.

Medium

Approach

Clarify what is being asked and what a complete answer contains.
Work from the requirement backwards to the design.
Say what you would check first and why it is the highest-information step.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

What is your proficiency with Python or other core languages used in our stack?

Medium

Approach

Work from the requirement backwards to the design.
State your assumptions explicitly before working the problem.
Clarify what is being asked and what a complete answer contains.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

Build a resumable usage export the customer can reconcile against

Medium · pagination · cursors · late data

Customers reconcile invoices against usage_event (event_id uuid, tenant_id, workspace_id, environment, sku, quantity numeric(20,6), idempotency_key, occurred_at, ingested_at, source_service, request_id), partitioned daily on ingested_at. The current export is ?page=N&per_page=1000 ordered by occurred_at, and a customer syncing hourly reports rows that never appear in their export but do appear on their invoice. Design the replacement: the ordering, the cursor's contents, the index it requires, and the rule deciding where a page stops. State what the client does on a timeout and on a cursor older than retention.

Approach

Separate the two defects in the current shape. Offset makes the database produce and discard N * per_page rows, so page cost grows linearly and a deep page degrades from milliseconds to seconds. Concurrent inserts also shift the window between requests, so a walker skips rows with no error raised anywhere, which for a customer sync is silent data loss.
Order by ingestion, not by occurrence. During a replay events arrive hours out of occurred_at order, so a consumer holding an occurred_at high-water mark can never see a late event that falls below it; (ingested_at, event_id) is the only ordering under which 'everything after my cursor' is a complete statement.
Page with a row comparison: where tenant_id = $1 and (ingested_at, event_id) > ($2, $3) order by ingested_at, event_id limit $4, backed by an index on (tenant_id, ingested_at, event_id). That seeks directly to the resume point, so every page costs the same regardless of depth.
Trail the head of the table. With ingested_at defaulting to now(), which is transaction start time, a long insert transaction receives an earlier timestamp and becomes visible after a reader has already passed it. Cap each page at ingested_at <= now() - delta, with delta larger than the longest write transaction as bounded by statement_timeout and idle_in_transaction_session_timeout, or the export skips exactly the rows written under load.
Make the cursor opaque and self-describing: base64 of the timestamp, the event id and a fingerprint of the filters, rejected when the filters differ from the current request. Return 410 with a cursor_expired code once the cursor's partition has been dropped, so the client restarts from a known time instead of resuming into a hole.
Keep a page a pure GET with no server-side consumption, so a timeout is resolved by retrying the identical cursor.

Worked solution (30 min)

Construct the failing case on paper: an event with occurred_at at 09:00 ingested at 14:00, and a consumer that read up to 10:00 at 11:00.
Write the keyset query with the row comparison and the exact index it needs, then say which column of the index each predicate uses.
Add the trailing-head predicate and pick delta from a named timeout setting rather than a round number.
Define the cursor's encoded contents and the two error cases: filter mismatch and expired partition, with their status codes.
Write the client's algorithm in four lines: request, persist cursor after processing the page, retry the same cursor on timeout, restart from a time on 410.

Expected result: Keyset pagination over (ingested_at, event_id) with an index on (tenant_id, ingested_at, event_id), a trailing head predicate sized above the longest write transaction, an opaque filter-bound cursor, and 410 for a cursor past retention.

Verify it yourself

A late event with an old occurred_at is still delivered by the export.
Page cost is independent of how many pages have already been read.
The cursor persists across a client restart and survives retrying the same page.
The tie-break column is unique, so no row can be skipped or repeated at a page boundary.

Follow-up

The customer asks for a total count alongside the first page. What do you offer instead, and why is an exact count both expensive here and wrong by the time it is read?
How would you let a customer re-read a window they have already consumed without giving up the forward-only cursor?

One tenant's counter writes stall the whole connection pool

Medium · lock contention · connection pool · multi-tenancy

A change that made a per-tenant usage counter correct now produces site-wide latency whenever one large tenant writes: unrelated endpoints time out waiting for a connection while database CPU stays low and no statement is slow. The change wraps the counter update in a transaction that takes SELECT ... FOR UPDATE on one row, calls an external pricing service, then updates and commits. Give an ordered checklist, the arithmetic that bounds that tenant's write rate, and three repairs with the cost each one accepts.

Approach

Separate waiting from working. Low database CPU alongside high application latency points at a queue, so instrument connection-acquisition wait separately from query execution time; that queue forms in the application and is invisible in database metrics, which is why the database looks healthy throughout.
Confirm the lock rather than assuming it: sample waiting sessions and group by wait event, relation and tuple. Contention concentrated on one tuple belonging to one tenant is the signature; a deadlock would instead show the database aborting transactions after its detection timeout, which is not happening here.
Do the arithmetic out loud. Throughput on a serialised row is one divided by the lock hold time, and the hold spans the external call, so a 20 ms pricing call caps that tenant near 50 writes per second no matter how many pods run. Every waiter also holds a pooled connection while it queues, so the shared pool drains and unrelated tenants fail at acquisition.
Repair one: shrink the critical section to a single statement with the price resolved before the transaction opens. Cost is a stale price for the duration of one request and a second round trip; benefit is a hold time measured in the database's own execution time.
Repairs two and three change where the contention lives rather than how long it is held. Sharding the counter into per-(tenant, bucket) rows and summing on read multiplies write throughput by the shard count, at the cost of an aggregate on every read and a shard count you must size against the largest tenant rather than the median. Accumulating in memory and flushing periodically removes the per-write round trip entirely, paid for with a bounded loss window on crash, which is acceptable for a rate limiter and not for a billing counter.
Contain independently of which repair wins: a separate pool or per-tenant concurrency cap for this write class, a statement timeout low enough that a pathological query dies before it accumulates waiters, and an idle-in-transaction timeout so a stuck client cannot pin a connection and its locks.

Follow-up

What would a genuine deadlock look like here, which two code paths would produce one, and how does the database's response differ from what you observed?
If a transaction-pooling proxy sits in front of the database, which of your three repairs changes behaviour, and what stops working that would have worked on a direct connection?
The counter also enforces a quota. Why is SELECT the count and then INSERT still wrong after you have fixed the contention?

Suggested practice checklist

Roughly ninety minutes on weeknights with one longer weekend block. The plan cuts scope rather than compressing everything, on the assumption that one thing finished per night beats four half-started.

Day 1 — Fix the scope and take a cold baseline

Read the role description and write the three things the loop will almost certainly test, then write an explicit not-doing list and keep it visible all week.
Take one twenty-five-minute coding problem and one fifteen-minute design prompt cold, and write the single sentence naming what blocked each, because those two sentences decide where the remaining evenings go.
Set the week's rule: one thing finished every night, including the night you only have forty minutes.

Deliverable: A one-page scope with a not-doing list and two cold attempts, each carrying one sentence on what blocked it.

Day 2 — One pattern, written three times from blank

Choose the single pattern most likely to appear in your loop and write it three times from an empty file rather than editing the previous attempt.
On the third pass, write the invariant as a comment before the loop body and the complexity before the first line of code.
Stop at ninety minutes even if the third version is imperfect, and write the one thing you would fix given another hour.

Deliverable: Three independent implementations of the same pattern plus a note on what changed between them.

Day 3 — One design, only to the depth you can defend

Take one system shape and go only as far as requirements, interface and data model, refusing to draw a box you could not survive a follow-up about.
Attach one number to each non-functional requirement, deriving it rather than asserting it, and write the assumption the number rests on.
Write the one tradeoff you are choosing against and the observation that would make you reverse it.

Deliverable: One design at interface-and-schema depth with derived numbers and one written reversible tradeoff.

Day 4 — Only the fundamentals you will have to defend

Write, in under two hundred words each, the answers to the two questions that follow almost any implementation: why this structure and not the obvious alternative, and what happens to this code at a hundred times the input.
Write what an index actually costs: faster lookups on the indexed columns against a write that now maintains a second structure, plus the cases where the planner declines to use it anyway, low selectivity, or a predicate wrapping the column in a function.
Delete any answer you cannot deliver aloud in under a minute, since an answer that needs reading is not an answer you have.

Deliverable: Three written answers, each under two hundred words and each timed aloud.

Day 5 — Your own work, timed

Write a ninety-second and a four-minute version of your main project and time both aloud rather than reading them.
Prepare the two follow-ups that always come: what you would do differently, and how you knew it worked.
Put one number in the first sentence and be ready to say exactly where it came from and what it excludes.

Deliverable: Two timed narratives with one defensible number in the opening line.

Day 6 — The one full rehearsal, in the weekend block

Run a sixty-minute mock covering a coding round and a design round in one sitting with no break, because sustained attention is the thing evenings have not trained.
Immediately afterwards, and before hearing any feedback, write the three moments you lost the thread.
Spend the rest of the block only on those three moments, and on nothing you merely feel shaky about.

Deliverable: Mock notes naming three failure moments with a specific fix written under each.

Day 7 — Taper

Write the twenty-minute warm-up you will actually do on the morning: one problem you can already solve from a blank file, one design you can narrate, and nothing you have never seen.
Re-read only your own notes from this week and open no new material.
Write the logistics down: the editor or shared document you will be working in, whether execution and lookups are permitted, and the sentence you will use when you do not know something.

Deliverable: A one-page card holding the design structure, the project numbers, and the logistics.

Outage answers are graded on instruments

Nobody is scoring your stamina at three in the morning. What carries weight is which signal told you something was wrong, what you measured before touching anything, what you rolled back versus what you fixed forward, and why you picked one. 'We restarted it and it went away' is a story about not knowing.

Walk me through your resume and the specific experiences that prepared you for this role.

Medium · behavioural and engineering judgement

Approach

Name the disagreement and how you resolved it with evidence.
State the situation in two sentences and spend the rest on the reasoning.
Pick a story where you made the decision, not one where you watched it.

Follow-up

What would you do differently if you ran that again?
What did you decide not to do, and why?

Why is Astro Digital the right place for your next professional chapter?

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
What did you decide not to do, and why?

How do you handle ambiguity in a project where requirements are still evolving?

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Close with what you would do differently, concretely.

Follow-up

How did you know your change caused the improvement?
What did you decide not to do, and why?

What interests you in working for a NewSpace company as opposed to traditional aerospace incumbents?

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What did you decide not to do, and why?
How did you know your change caused the improvement?