ARX Robotics Software Engineer Interview Questions & Guide 2026

The 60-second brief

At ARX Robotics, the Software Engineer role is at the intersection of cutting-edge hardware and autonomous intelligence. You will be responsible for developing the software stacks that power ARX Robotics' modular robotic systems, making sure they operate reliably in complex, real-world environments. Your work directly affects how the company's machines navigate, interact, and execute missions in the field, making it central to ARX Robotics' goal of scaling autonomous utility.

The behavioural round is a technical round in narrative form. Prepare it by collecting specifics you actually owned, such as a design you argued against, an incident you diagnosed, or a decision you later reversed, rather than by rehearsing phrasing.

Focus areas

• Choose indexes from the query's access path
• Bound every outbound call with a timeout
• Detect concurrent edits instead of losing writes

Overview

This role requires a blend of high-level architectural thinking and low-level precision. You will collaborate closely with hardware and field operations teams to solve unique technical challenges, such as optimizing sensor data processing or refining control algorithms. If you are passionate about building scalable, field-ready robotics solutions that move beyond the laboratory into active, high-stakes environments, this position offers a unique opportunity to shape the future of autonomous systems.

The ARX Robotics interview process

ARX Robotics candidates report 4 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

HR Conversation

An unlabelled round is first an information problem, and the cheapest information is free. Whoever schedules it can usually tell you how long it runs, who will be in the room and what they work on, whether you will be writing code and in what environment, and whether anything is being sent beforehand. Ask in writing so the answer is on record, then prepare for the two or three formats those answers still leave open instead of betting on one. What separates a strong candidate is not guessing right; it is having an opening that works whichever one it turns out to be.

What to demonstrate

• Whether you can start work from an ambiguous brief, since tolerating a vague scope without stalling is the same thing the job asks for
• Whether the questions you asked beforehand were ones that change your preparation, such as duration, medium and who is joining, rather than ones whose answers you could not have acted on
• Whether you adapt when the round turns out to be something other than what you were told, instead of spending the first ten minutes visibly recalibrating

How to prepare

• Send one short scheduling message asking four things: how long, who is joining and what they work on, whether you will be writing code and where, and whether to prepare anything in advance. Treat a vague reply as real information, since it means the round is loosely structured and you will be shaping it yourself.
• Write one opening that works in any of the formats still open: restate in your own words what you have been asked to do, then ask which of two directions is more useful to them. Say it aloud until it stops sounding recited.
• Set up for the two most likely formats before the call starts, with a blank editor in the language you would choose and a shared document you can type into, so a format surprise costs you nothing in the first minutes

Technical Interviews

What this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.

What to demonstrate

• Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
• Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
• Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly

How to prepare

• Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
• Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
• Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live

Technical Presentation

Most of the time lost in this format is not lost to thinking. It goes to a standard-library call you half-remember, an off-by-one in a loop bound, and a debugging loop that mutates code at random until something passes. When output is wrong, stop re-reading the whole function: take the smallest input that reproduces it and walk the state through by hand, printing intermediates if the environment allows. Guessing at a fix without a failing case you understand is how a five-minute bug becomes twenty, and the clock does not pause while you do it.

What to demonstrate

• Whether you reach the right structure without a detour, and can write it from memory rather than only recall that one exists
• Whether overflow is considered where the language has fixed-width integers, since a signed 32-bit value stops at 2,147,483,647 and then wraps in Java, is undefined behaviour in C++, and does not arise in Python, whose integers grow instead
• Whether recursion depth is treated as a constraint on large inputs, given that CPython's default limit is 1000 frames and a deep recursion can exhaust the stack in any language where an iterative version would not
• Whether a failing case is isolated and explained before any edit is made to the code

How to prepare

• From an empty file and with no references open, implement the pieces you lean on most: a heap push and pop, an iterative DFS with an explicit stack, and a binary search whose midpoint is written lo + (hi - lo) / 2, which avoids the overflow that (lo + hi) / 2 can hit in a fixed-width integer type
• Time yourself on the ten library calls you look up most, such as sorting with a custom comparator, splitting and joining strings, and finding the next key at or above a value in an ordered map, until the lookup is gone
• Take a solution you know is broken and, before touching it, write one sentence naming the input, the expected value and the actual value. Repeat until you do it without deciding to.

Leadership Meeting

You cannot drill a format you do not know, so put the preparation into material that travels. Three pieces of your own work, each rehearsed until you can take a follow-up you did not anticipate, will carry a conversation or a code walkthrough equally well. Specificity is what separates that from filler. A number needs its definition before it means anything: a p99 is over some window and measured at some hop, and a server-side figure excludes the queueing and network time a client would see. The number you cannot qualify is the one to leave out.

What to demonstrate

• Whether your examples carry detail only someone who did the work would hold, such as what the binding constraint actually was, which alternative you rejected and why it was worse, and what you measured on each side of the change
• Whether a number survives one follow-up, meaning you can say what it was measured over and whether it moved because of your change or merely alongside it
• Whether a failure is described with the specific change that followed it, rather than a lesson stated in general terms
• Whether your part in a team effort is stated accurately, including what other people did

How to prepare

• Write a page on each of three projects covering the constraint, the option you rejected, the measurement before and after, and what went wrong. Cut any line you cannot take a follow-up on, since you are writing the parts you will be pressed on rather than a summary.
• Recover the real figures while you still have access: request volume, data size, latency with its percentile and window, team size, timeline. Note where each came from, whether a dashboard, a design document or memory, and mark the estimates so you can say which they are out loud.
• Take your weakest project story to someone who works in a different area and have them ask why four times in succession. The point where you run out of answer is the part to go and re-read before the round.

Where candidates lose points

Paginating with LIMIT/OFFSET over a set that changes while the client is reading it

OFFSET n makes the database produce and discard n rows before returning anything, so the cost of a page grows with its depth rather than with its size and page 500 costs five hundred pages of work. The correctness problem is worse than the cost: if a row is inserted or reordered between two page fetches, rows shift across the offset boundary and are either skipped entirely or returned twice, and neither outcome leaves any trace in the response for the client to detect. Keyset pagination - WHERE (sort_key, id) < ($last_sort_key, $last_id) ORDER BY sort_key DESC, id DESC LIMIT n, backed by an index in exactly that order - reads only the rows it returns and is stable against concurrent inserts. It requires the tie-break column: a timestamp is not unique, and duplicate sort keys straddling a page boundary reintroduce the skip it was adopted to remove.

Choosing an index from the columns a query mentions rather than from how it filters and orders

A composite B-tree index on (a, b, c) can be seeked only as a left prefix: equality on a, then equality on b, then a range or an ordering on c. A query that filters on b alone cannot seek into it at all and at best gets a full scan of the index; a query that filters a and ranges on b gets no benefit from c, because the index is only sorted by c within a fixed (a, b) pair. The practical consequence is that one index per column is close to useless for multi-predicate queries while a single correctly ordered composite index turns a scan into a lookup. The ordering half is what gets missed: if the index cannot satisfy the ORDER BY, the database must read every matching row and sort before the limit can apply, so a LIMIT 20 over a million matching rows still reads a million rows.

Hardcoding to the sample inputs

Solve the stated problem rather than the two examples; special-casing a literal to make a sample pass is obvious immediately and reads as either a misunderstanding or an attempt to fake progress. If you genuinely cannot generalise yet, say which part is a stub and what would replace it.

A queue or buffer with no bound

Every producer-consumer boundary needs a capacity and a policy for reaching it: block the producer, shed load, or drop the oldest entry. Unbounded buffering converts a temporary slowdown into memory exhaustion and hides the backpressure signal that would have revealed the consumer was falling behind.

Questions & practice

Track a rolling failure rate per destination for circuit decisions

Easy · sliding window · ring buffer · circuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach

1. Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
2. Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
3. State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
4. Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.
5. Expire idle destinations, or memory grows with every destination ever seen rather than with the live set. Hold the rings in a bounded LRU keyed on destination_id and treat a miss as no history, which is the correct default for an endpoint that has been silent for a minute.
6. Keep the half-open probe out of the window arithmetic. After the circuit opens, one probe per interval decides whether to close it, and folding that single success into a window that still holds a 100 percent failure history would reopen the destination on one data point.

Follow-up

• The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
• A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?
• How would you make the window survive a process restart, and is it worth the cost?

Merge partitioned event streams into one ordered feed with bounded lateness

Hard · k-way merge · watermarks · out-of-order streams

The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.

Approach

1. Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
2. Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
3. Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
4. Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.
5. Choose the late-event policy from what the projection is keyed on. The projection upserts on (aggregate_id, aggregate_version) and discards a version it has already applied, so a late event is safe to apply out of order and correctness never depended on the merge at all. Apply it, recompute the affected feed page, and count lateness so the 30-second budget can be re-derived from data rather than folklore.
6. Say what the merge does not buy: ordering is guaranteed within one aggregate by the log's partitioning, and no watermark makes the cross-aggregate order authoritative. Two events from different aggregates in the same millisecond have no true order, so the feed's order is a presentation choice that must be stable rather than correct.

Follow-up

• The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
• The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?
• One partition is ten minutes behind because its producer is slow. Do you stall the feed or emit without it?

Archive a resource graph without breaking live references or recursing

Medium · graph traversal · topological order · tenant isolation

Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.

Approach

1. Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
2. Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
3. Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
4. Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.
5. Store the graph as CSR rather than a map of lists: an offsets array of V+1 8-byte entries plus E 8-byte targets is about 80 MB at this size, where boxed adjacency lists cost several times that and lose cache locality on every hop.
6. Run Kahn over the condensation for the order in O(V+E). If the emitted count is short of the component count the condensation step itself is wrong, since a condensation cannot contain a cycle, which makes the check free.

Worked solution (30 min)

1. Write the edge-loading query with the tenant predicate on both endpoints and state what it does with a cross-tenant edge.
2. Implement iterative Tarjan with an explicit stack and confirm on a three-node cycle that it emits one component of size three.
3. Build the transpose restricted to the visited set and mark every node with an in-edge from outside it as refused, carrying the referrer id.
4. Run Kahn over the condensation and verify the emitted order against the referrer-before-referenced rule.
5. Size the CSR arrays for 2,000,000 nodes and 8,000,000 edges and compare against a boxed adjacency map.

Expected result: An iterative O(V+E) traversal over a tenant-scoped CSR subgraph, SCC condensation so cycles archive atomically as one component, a transpose-based refusal list naming the external referrer for each blocked resource, and a Kahn topological order over the condensation, with recursion replaced by an explicit stack because of graph depth rather than style.

Verify it yourself

• A two-node cycle with no external referrers archives as one unit, and adding a single external referrer moves both nodes to the refusal list.
• No resource appears in the archive order before something that references it, except within its own component.
• A counter on edge visits matches the loaded edge count exactly, confirming each edge is traversed once.

Follow-up

• The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
• The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?
• An edge points at a resource in another tenant. Is that a refusal, an error, or an alert?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

1. Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
2. Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
3. Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
4. State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.
5. For the job case the invariant is expressible per row, so let the database hold it: a partial unique index on job_run (tenant_id, job_type) WHERE status IN ('queued','running') makes a second running export unwritable and the loser takes 23505, mapped to 409. That is strictly better than a counter — no drift, no reconciliation — and it is available only because the cap is one rather than fifty.
6. Add the retry discipline each route demands: under SERIALIZABLE both 40001 and deadlock 40P01 are retryable and the retry must re-execute the read, while under READ COMMITTED with the counter nothing retries, because the conflict is reported to the caller rather than raised as an error.

Follow-up

• A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
• The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?
• How do you detect after the fact that the counter drifted, without locking the table?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

1. One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
2. Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
3. State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
4. Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.
5. Refuse to auto-retry the whole PUT. A retry re-reads the winner's state and reapplies an intent formed against data that no longer exists — the silent overwrite the version token was added to detect. Return the conflict; merge field-wise only if the patches are provably disjoint.
6. Note that now() is the transaction timestamp in PostgreSQL, so resource.updated_at, the revision's created_at and the outbox row share one instant, which is what later makes reconciliation between the three tables unambiguous.

Worked solution (25 min)

1. Write the three statements plus the rowcount branch and confirm they sit in one BEGIN/COMMIT with no outbound call between them.
2. Run two clients that both read version 7 and apply their updates 5 ms apart; assert one 200 and one 409.
3. Assert resource.version = 8, exactly one resource_revision row at version 8, and one outbox_event row at aggregate_version 8.
4. Repeat at REPEATABLE READ and record the different failure shape (SQLSTATE 40001) the handler must also map to 409.
5. Delete the version predicate and re-run: both writes commit and the first edit disappears with no error raised anywhere.

Expected result: Exactly one of the two commits. version = 8 with one revision row and one outbox row at version 8, the loser gets 409 carrying version 8, and no state exists in which the resource moved but the revision or the outbox row is missing.

Verify it yourself

• COUNT(*) of resource_revision for that resource equals resource.version, with no gap in the version sequence.
• Kill the process between the UPDATE and the outbox INSERT — the transaction rolls back and no event describes a change that never happened.
• Under a 50-way race, resource.version equals the number of 2xx responses rather than the number of requests.

Follow-up

• A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
• Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?
• Every write now touches a second hot table. How do you keep the outbox insert and its partial index from becoming the write bottleneck at 1.2k writes/second?

How do you approach the integration of software with proprietary hardware modules?

Medium

Approach

1. Work from the requirement backwards to the design.
2. Clarify what is being asked and what a complete answer contains.
3. Say what you would check first and why it is the highest-information step.

Follow-up

• How would you know your answer was wrong?
• What assumption would you test first?

What strategies do you use to ensure code reliability in mission-critical environments?

Medium

Approach

1. Clarify what is being asked and what a complete answer contains.
2. Say what you would check first and why it is the highest-information step.
3. State your assumptions explicitly before working the problem.

Follow-up

• How would you know your answer was wrong?
• What assumption would you test first?

Make resource creation safe for a client that retried a timeout

Medium · idempotency · retries · race conditions

POST /v1/resources creates a resource row and, in the same transaction, a resource_revision and an outbox_event. A partner's HTTP client times out at 2 seconds and retries twice; under load the first request is still executing when the retry arrives, and duplicate resources are appearing. Using idempotency_key (tenant_id, idempotency_key, request_fingerprint, state, response_status, response_body, resource_id, locked_until, expires_at), specify the whole contract: first call, concurrent retry, retry after completion, a key reused with a different body, and what the client does with each response.

Approach

1. Name why the plain REST shape fails here. POST is not idempotent, a timeout leaves the client unable to distinguish a lost request from a lost response, so it must retry - and the retry is a second create. Checking whether the key exists and then inserting it is check-then-act: under exactly the concurrency that caused the timeout, both attempts look, both see nothing, both proceed.
2. Let the unique constraint arbitrate instead. INSERT the key row with state 'in_flight' and locked_until set to now plus the request deadline, and commit that reservation on its own before any work is attempted - an uncommitted row is invisible to the concurrent retry, which is the entire point of writing it first. One caller wins the insert and proceeds; the other takes the unique violation and reads the row rather than falling through to the work.
3. Branch the loser on what it found. 'succeeded' replays response_status and response_body verbatim, with a header marking it a replay. 'in_flight' with locked_until in the future returns 409 and a Retry-After - do not park a request thread waiting on another request, that is how a concurrency bound is consumed by retries. 'in_flight' past locked_until is reclaimable by a conditional UPDATE predicated on the old locked_until, so exactly one reclaimer wins. A fingerprint mismatch is 422 and never the stored response: a different body under the same key is a client defect, and serving the old response hides it forever.
4. Commit the effect and the key's completion together - resource insert, revision row, outbox row, and the UPDATE of the reserved key to 'succeeded' with the stored response, in one transaction. That makes a crash binary: either all of it is durable and the key reads 'succeeded', or the transaction rolls back and the only durable trace is the reservation row, still 'in_flight', with no resource behind it. The reclaim branch finishes that case - once locked_until passes, one retry takes the row by conditional UPDATE and runs the work for the first time. Splitting the two commits is what creates the window with no recovery: the effect durable, the key still 'in_flight', and a reclaimer that cannot distinguish that from work never started, so it creates a second resource.
5. State the lifetime explicitly. Keys expire - 24 hours is a common choice - and are swept, so the client's total retry window must be shorter than the TTL, or a late retry re-executes with no record that it is a duplicate. The key is scoped by tenant so two tenants choosing the same string do not collide, and the client generates one key per logical attempt, not per network send.
6. Write the client rules: on timeout, retry the same key with capped backoff; on 409, wait Retry-After and retry the same key; on 422, stop and fix the caller; on 2xx, treat the body as authoritative whether it was executed or replayed.

Worked solution (30 min)

1. Write the two-request interleaving that defeats read-then-insert, with the line each request is executing at each step.
2. Write the insert-first sequence and the four branches taken on unique violation, as a table of state, locked_until and response.
3. Put the completion UPDATE inside the same transaction as the resource, revision and outbox writes, then state what a crash before that commit leaves durable and which branch cleans it up.
4. Define the key's scope, lifetime and generation rule, then bound the client's retry budget by the TTL.
5. Fire two concurrent requests carrying one key and count rows in resource and resource_revision.

Expected result: One resource row, one revision row and one outbox row; the second caller either replays the first response or receives 409 with Retry-After; a different body under the same key is rejected 422; no request thread blocks waiting on another request.

Verify it yourself

• A hundred runs of two simultaneous same-key requests produce exactly one resource and one revision every time.
• Killing the process mid-work leaves zero resource rows and the reservation still 'in_flight'; after locked_until passes a retry reclaims the key and executes, so the crash and the retry together produce exactly one resource row.
• The documented client retry budget is strictly shorter than expires_at minus created_at.

Follow-up

• Response bodies are pruned at 24 hours but resource_id is kept. What do you return to a replay that arrives after pruning?
• The endpoint now also sends a welcome email. Which part of this contract prevents a second send, and which part cannot?
• What exactly breaks if the key is scoped globally rather than per tenant?

Read latency spikes on a sixty-second sawtooth

Medium · cache stampede · single-flight · ttl · tail latency

The cached listing read path serves about 14k reads/second at an 85% hit rate. p99 sits at 35 ms for 57 seconds, jumps to 900 ms for 3, and repeats. During each spike the primary shows several hundred identical listing queries starting within the same millisecond, all carrying one large tenant's id. Cache entries use a 60-second TTL. Give the mechanism, the ordered checks, the fix, and the correctness hazard your fix must not introduce.

Approach

1. Match the period to a configured number before theorising about load. A spike every 60 seconds against a 60-second TTL is an entry expiring, and you confirm it by correlating spike timestamps with the entry's write time rather than with the traffic curve. If the period had matched a cron or a GC interval instead, this is a different investigation.
2. Establish the concurrency of the miss. Several hundred identical queries in one millisecond means the miss path has no coalescing: every request that arrives between expiry and repopulation recomputes. The herd size is that key's arrival rate times its recompute time, so at 1.2k reads/second for the hot key and a 250 ms recompute you expect about 300 concurrent misses, which matches what is observed.
3. Add single-flight on the miss path so one caller per key recomputes under a short-lived lock while the rest wait for its result. Prefer stale-while-revalidate where the read tolerates it: return the expired value immediately and refresh asynchronously, which removes the latency spike rather than serialising it into a queue of waiters.
4. De-synchronise the keys. Write TTLs with jitter, for example 60 seconds plus or minus 10%, so a deploy or a mass invalidation does not align every key on the same second and turn a per-key herd into a fleet-wide one.
5. Name the hazard the fix must not introduce. Serving a stale listing is acceptable only because the API reports the projection watermark, and a reader that loaded the old value before a write can repopulate the entry after the invalidation, so the bounded TTL is what actually caps staleness rather than the delete. Keep read-after-write pinned to the primary for the writing session regardless.
6. Verify on miss concurrency, not hit rate. The hit rate barely moves, because the herd is one miss multiplied; the number that must change is distinct origin queries per key per minute.

Follow-up

• The same sawtooth appears on a key that is invalidated on write rather than expired. Is that the same bug?
• How does your answer change if the recompute takes 4 seconds instead of 250 ms?
• What exactly does a client see during a stale-while-revalidate window, and how does the watermark let them tell?

Suggested practice checklist

For someone fluent in a dynamic language who has shipped real work but has never had to say what the runtime is doing underneath. The week is built on measuring and deliberately breaking things, because the questions that expose this background are the ones where the interviewer asks why a second time.

Day 1 — Measure before reasoning

• Take a slow piece of your own code, write down in advance where you believe the time goes, then profile it and record how wrong the guess was. The cost is usually an allocation you did not notice or an accidental quadratic membership test.
• Replace one list membership test inside a loop with a set and measure at a thousand, ten thousand and a hundred thousand elements, confirming the shape of the curve rather than only that it got faster.
• Write down the three quantities you can now measure instead of assert: wall time, peak memory, and call count for the function you suspected.

Deliverable: A before-and-after profile of real code plus a written note on the size of the gap between the guess and the measurement.

Day 2 — References, copies, and the bugs they produce

• Write the function with a mutable default argument, call it three times, and explain the accumulating result: the default is evaluated once when the function is defined, so every call shares one object.
• Build a nested structure, take a shallow copy, mutate an inner element, and show that both views changed, because a shallow copy duplicates the container and not the elements. Then fix it with a deep copy and state the cost you just accepted.
• Write two functions, one mutating its argument in place and one rebinding the local name, and predict the caller's view of each before running it. That single distinction produces most of the bugs that pass their tests.

Deliverable: Three small programs whose output you predicted correctly before running, each with a one-line statement of the rule underneath.

Day 3 — Types, once, in a language that checks them

• Port one module you have already written, roughly a hundred lines, into a statically typed language, and record every place the compiler demanded an answer your original had left implicit: a value that can be absent, a numeric width, a case never handled.
• Write the same signature in both languages and state what the static one guarantees before the program runs and what it does not, since it will not save you from a wrong algorithm or an index out of range.
• Write the difference between an interface satisfied by declaration and one satisfied structurally, with one case each where the other approach would miss the mistake.

Deliverable: One module in two languages plus a list of the questions the type checker forced you to answer.

Day 4 — Concurrency, starting with what actually runs at the same time

• Run the same CPU-bound function across four threads and four processes and measure both. Under the default CPython build the threaded version will not speed up, because only one thread executes bytecode at a time; the process version will. Check which build you are on first, since free-threaded builds remove that lock and change the result.
• Then run a blocking I/O workload across four threads and measure it speeding up, because the interpreter releases that lock around blocking calls, which is why treating threads as useless is wrong as a general claim.
• Build the lost update: two threads each incrementing a shared counter a hundred thousand times, and show a final value below the expected sum, because an increment is a load, an add and a store and the thread can be suspended between them. Fix it with a lock and then measure what the lock costs.

Deliverable: Three measurements, threads against processes on CPU work, threads on I/O work, and a demonstrated lost update, each with the mechanism written underneath.

Day 5 — Debugging as a procedure rather than an instinct

• Work one real failure as a bisection: find a revision or an input size where it is good and one where it is bad, halve repeatedly, and state the two assumptions bisection needs, that the property changes exactly once across the range and that the test is reliable.
• Minimise one failing input to the smallest version that still fails, and record how many rounds it took.
• Keep a hypothesis log for one bug in three columns, what I believe, what would disprove it, what I observed, and stop yourself the first time you are about to change two things at once.

Deliverable: One bug worked to root cause with a written hypothesis log and a minimised reproducing input.

Day 6 — Tests that catch the bug you are about to write

• Implement an LRU cache with a capacity bound, then write the three test cases that would catch an off-by-one in eviction: insert exactly capacity items and assert nothing was evicted, insert one more and assert the least recently used key is the one gone, and read an old key just before that insert so the eviction victim changes.
• Add a property test comparing your implementation against a deliberately slow reference, an ordered list scanned linearly, over a few thousand random operation sequences, because a slow reference finds the cases you would not have thought to write.
• Write one numeric test that fails under exact equality and passes with a tolerance, and state why the tolerance has to be relative rather than absolute once the magnitudes grow.

Deliverable: An LRU implementation with three boundary tests, one property test against a slow reference, and one tolerance-based numeric test.

Day 7 — Debug something broken, out loud

• Have someone plant three defects in a two-hundred-line program, an off-by-one, a shared mutable state bug, and a wrong error-handling path, then find them while narrating, under a fixed rule: state the hypothesis before touching anything.
• Time each one and record which tool found it, reading, a printed value, a debugger, or a test, because the question asked in interviews is how you would find it rather than what it was.
• Write the sentence you will use when you do not yet know the cause, one that names the next measurement instead of offering a guess.

Deliverable: A recorded debugging session with time-to-find per defect and the method that found each.

Know where your numbers came from

Bring the two or three numbers the story rests on and know how they were collected. A p99 whose timer starts inside your handler excludes the time a request spent queued, so it can sit flat while users wait longer. Give the window, the percentile and what the measurement left out, or drop the number.

Walk us through your previous experience with autonomous systems and what you hope to achieve here.

Medium · behavioural and engineering judgement

Approach

1. Name the disagreement and how you resolved it with evidence.
2. Give the blast radius: what could have broken, and what you measured.
3. Close with what you would do differently, concretely.

Follow-up

• What did you decide not to do, and why?
• How did you know your change caused the improvement?

How do you handle technical disagreements when working with cross-functional hardware teams?

Medium · behavioural and engineering judgement

Approach

1. Close with what you would do differently, concretely.
2. State the situation in two sentences and spend the rest on the reasoning.
3. Pick a story where you made the decision, not one where you watched it.

Follow-up

• What would you do differently if you ran that again?
• What did you decide not to do, and why?

Describe a time you had to troubleshoot a performance bottleneck in a real-time system.

Medium · behavioural and engineering judgement

Approach

1. Close with what you would do differently, concretely.
2. Name the disagreement and how you resolved it with evidence.
3. Pick a story where you made the decision, not one where you watched it.

Follow-up

• What would you do differently if you ran that again?
• How did you know your change caused the improvement?

Describe a situation where you had to adapt your technical approach based on changing mission requirements.

Medium · behavioural and engineering judgement

Approach

1. Pick a story where you made the decision, not one where you watched it.
2. Give the blast radius: what could have broken, and what you measured.
3. State the situation in two sentences and spend the rest on the reasoning.

Follow-up

• How did you know your change caused the improvement?
• What did you decide not to do, and why?