Interview guides · Ameresco

Ameresco Software Engineer Interview Questions & Guide 2026

Ameresco software engineer prep on operations: decide what you would need to see to know a release is going wrong.

The 60-second brief

A Software Engineer at Ameresco plays a pivotal role in bridging the gap between advanced technology and sustainable infrastructure. You will be tasked with developing and maintaining software solutions that support Ameresco's mission of providing energy efficiency and renewable energy projects. Your work directly impacts the efficiency of complex energy systems, helping the company optimize performance for clients across various sectors.

Scope in the operational half of the job when the seat carries on-call. Rollout, rollback and what you would put on a dashboard belong inside a design answer rather than after it, and an answer that never reaches them reads as someone who has built systems but not run them.

Focus areas

Choose indexes from the query's access path
Trace a symptom to a mechanism under load
Make every write idempotent under retry

Overview

This role is unique because it requires more than just pure coding ability; it demands a genuine interest in the intersection of software and energy performance contracting. Whether you are building internal tools for project management or developing software to monitor energy consumption, your contributions are critical to the company’s ability to deliver tangible, high-impact environmental results. You will work within a collaborative, mission-driven environment where your technical output translates into real-world sustainability.

Where to focus your preparation

Treat the sections below as preparation areas and confirm the format with your recruiter.

Preparation focus

No round sequence has been reported for this company, so work the categories below and confirm the format with your recruiter.

What to demonstrate

Breadth across SQL, experimentation and product reasoning
Ability to state assumptions before choosing a method

How to prepare

Drill the practice exercises below and time yourself
Prepare three quantified stories about decisions you drove

Where candidates lose points

Letting a slow dependency consume unbounded concurrency

The failure that takes a service down is usually not an error but a delay. A dependency answering in thirty seconds instead of fifty milliseconds holds each request's worker or connection six hundred times longer, and since required concurrency is arrival rate times latency, a fleet sized for sixty in-flight requests now needs thirty-six thousand to sustain the same rate - so it queues, and requests whose clients have already abandoned them still occupy resources. Retries make it precisely worse: a policy of three attempts triples the load on a dependency at the exact moment it is least able to serve, which is how one slow dependency becomes an outage of everything sharing that pool. Containment is four specific things - a timeout on every outbound call shorter than the caller's remaining budget, a bounded pool per dependency so one cannot starve the others, backoff with full jitter rather than a fixed delay so retries do not resynchronise, and a circuit that stops sending once the failure rate makes an attempt pointless.

Shipping a migration and the code that depends on it as a single change

During any rolling deploy, and for as long as a rollback remains possible, old and new code execute against the same schema at the same time. A migration that drops or renames a column breaks every instance that has not restarted yet, and code that requires a column the migration has not applied breaks every instance that restarted early. The discipline is expand then contract: add the new column nullable, write both shapes, backfill in batches, move reads across once the backfill is verified, and only then stop writing the old shape and drop it - four deploys, usually spread over days. It feels disproportionate until the first rollback, at which point it is the only reason the previous version still runs.

Quoting amortised or average cost as if it were a worst-case guarantee

Appending to a dynamic array is amortised O(1), but the append that triggers a resize copies every element, and hash lookup is constant only while the hash spreads the actual keys. Say which guarantee you are offering when the caller cares about the latency of one call rather than the total over many.

Finishing a solution without stating its complexity

Give time and space in the same breath as the code, and define n explicitly when there are two sizes, since n nodes and m edges are not interchangeable. Space is the half that gets skipped: count the auxiliary structures you allocate and the recursion stack at its deepest, not only the answer you hand back.

Questions & practice

Canonicalise a request body into a stable idempotency fingerprint

Medium · parsing · canonicalisation · hashing

idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.

Approach

Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.
Frame the hash preimage so concatenation cannot collide: delimit or length-prefix the method, path and body, otherwise one request's fields can be rearranged into another request with the same byte stream and the same fingerprint.
Name the refusals and their consequence: no case folding, no dropping of null-valued keys, no Unicode normalisation. Each makes two different requests fingerprint alike, and the resulting failure is the worst one this table has, since the second request is answered with the first one's stored response and its effect never happens.

Follow-up

A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
Where does the fingerprint get computed relative to request decompression and the body-size limit?
The endpoint takes 1,000 requests per second with 256 KB bodies. What does hashing cost, and does it belong at the edge or in the core service?

Diff a projection against the primary without per-row point reads

Hard · reconciliation · range hashing · throttling

The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.

Approach

Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.
Pin the comparison to a point in time or it reports lag as drift: consider only rows whose updated_at is older than now minus a lag margin, and re-check each candidate mismatch individually before repairing. At 1,200 writes per second a diff without this reports thousands of false positives, and an unattended repairer would then overwrite live rows with stale values.
Make the run resumable and throttled: batch by range key, persist the last completed range, and watch a signal such as replica lag or primary CPU, pausing rather than pressing on. A reconciliation that cannot be stopped and resumed gets killed halfway and restarted from zero, which is how a repair becomes an incident.

Follow-up

The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?
How would you run this continuously at low cost instead of only as incident response?

Archive a resource graph without breaking live references or recursing

Medium · graph traversal · topological order · tenant isolation

Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.

Approach

Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.
Store the graph as CSR rather than a map of lists: an offsets array of V+1 8-byte entries plus E 8-byte targets is about 80 MB at this size, where boxed adjacency lists cost several times that and lose cache locality on every hop.
Run Kahn over the condensation for the order in O(V+E). If the emitted count is short of the component count the condensation step itself is wrong, since a condensation cannot contain a cycle, which makes the check free.

Worked solution (30 min)

Write the edge-loading query with the tenant predicate on both endpoints and state what it does with a cross-tenant edge.
Implement iterative Tarjan with an explicit stack and confirm on a three-node cycle that it emits one component of size three.
Build the transpose restricted to the visited set and mark every node with an in-edge from outside it as refused, carrying the referrer id.
Run Kahn over the condensation and verify the emitted order against the referrer-before-referenced rule.
Size the CSR arrays for 2,000,000 nodes and 8,000,000 edges and compare against a boxed adjacency map.

Expected result: An iterative O(V+E) traversal over a tenant-scoped CSR subgraph, SCC condensation so cycles archive atomically as one component, a transpose-based refusal list naming the external referrer for each blocked resource, and a Kahn topological order over the condensation, with recursion replaced by an explicit stack because of graph depth rather than style.

Verify it yourself

A two-node cycle with no external referrers archives as one unit, and adding a single external referrer moves both nodes to the refusal list.
No resource appears in the archive order before something that references it, except within its own component.
A counter on edge visits matches the loaded edge count exactly, confirming each edge is traversed once.

Follow-up

The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?
An edge points at a resource in another tenant. Is that a refusal, an error, or an alert?

Explain why the owner filter ignores the listing index

Medium · composite index · query plans · sort elimination

The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.

Approach

Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.
Answer the two negatives explicitly. owner_user_id alone is not a left prefix of the new index, so it degrades to a full scan of the index at best. Ordered by updated_at, the query still seeks on the (tenant, owner) pair but must sort, because only created_at is ordered within that pair.
Measure both sides with EXPLAIN (ANALYZE, BUFFERS) and compare estimated against actual rows at the lowest node — a 2M-versus-200 misestimate there is usually what chose the plan, and adding an index will not fix a statistics problem.

Follow-up

90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
A dashboard runs this for 40 owners in one page load. What changes about the design?
How do you roll this index out on a table taking 1.2k writes/second, and what does it cost on every insert from then on?

Find version gaps and relay lag with window functions

Medium · window functions · event tables · frame semantics

outbox_event holds event_id, aggregate_type, aggregate_id, aggregate_version, event_type, payload, status ('pending','published','dead'), attempts, created_at, published_at. A projection is missing rows and you must decide whether the relay skipped events or the consumer dropped them. Write three queries over the last seven days: one listing every aggregate_id whose published aggregate_version sequence has a hole, one giving per-day counts with a running total, and one returning the newest published event per aggregate. For each, say where the window function is evaluated relative to WHERE and LIMIT. PostgreSQL 16.

Approach

Gaps: compute lead(aggregate_version) OVER (PARTITION BY aggregate_id ORDER BY aggregate_version) in a subquery, then filter next_version <> aggregate_version + 1 in the outer query. Window functions are evaluated after WHERE, GROUP BY and HAVING and before the outer ORDER BY and LIMIT, so the predicate cannot sit in the same WHERE clause and PostgreSQL 16 has no QUALIFY.
Say what the seven-day filter does to the answer: it truncates every partition, so the first row per aggregate has no predecessor inside the window and a hole spanning the boundary is invisible. Widen the window, or join to resource.version as the authority for the true maximum.
Running total: SELECT date_trunc('day', created_at) AS d, count() AS n, sum(count()) OVER (ORDER BY date_trunc('day', created_at) ROWS UNBOUNDED PRECEDING). An aggregate inside a window call is legal because grouping runs before windowing. The grouping key is unique per row here so ROWS and RANGE agree, but write the frame anyway — over ungrouped rows with tied timestamps the default RANGE frame pulls in every peer row and the total jumps.
Newest per aggregate: DISTINCT ON (aggregate_id) ... ORDER BY aggregate_id, aggregate_version DESC is the cheap PostgreSQL-only form when an index matches that order; row_number() OVER (PARTITION BY aggregate_id ORDER BY aggregate_version DESC) = 1 is the portable form and needs a subquery for the same evaluation-order reason as the gap query.
Interpret rather than report: no gaps plus a normal p95 of published_at - created_at points at the consumer; gaps or a fat lag tail point at the relay; rows still 'pending' with attempts > 0 point at neither, because they never left the database.
Be explicit that the partial index on (created_at, event_id) WHERE status = 'pending' does not serve any of these — they read published rows. Name the index a recurring monitor would need, and say why a query run twice a year may not deserve one.

Worked solution (30 min)

Write the three queries against seven days of data and confirm each returns without error.
In a scratch copy, delete one middle event for a single aggregate and confirm the gap query names that aggregate and the versions either side.
Run a running total over ungrouped rows ordered by date_trunc('second', created_at), once with the default frame and once with ROWS, and record where the two series diverge.
Compare the DISTINCT ON and row_number() plans on the same data and record rows-read for each.

Expected result: The gap query returns one row per hole with the version on each side; the daily query returns seven rows whose running total ends at the seven-day count; the newest-per-aggregate query returns exactly one row per aggregate_id present in the window. The RANGE running total is higher than the ROWS one at every tied second.

Verify it yourself

The per-day counts sum to COUNT(*) over the same predicate.
Re-running the gap query after reinserting the deleted event returns zero rows.
count(*) of the newest-per-aggregate result equals count(DISTINCT aggregate_id) over the same filter.

Follow-up

Relay failover redelivers events. Does a duplicate break the gap query, and how would you detect one from this table alone?
Turn the gap check into a continuous monitor rather than a query someone runs after an incident. What does it watch?
The consumer claims it never received event 4,812,006. What do you look at, in what order?

Talk me through your resume.

Medium

Approach

State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Clarify what is being asked and what a complete answer contains.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Can you share your skills and relevant experience?

Medium

Approach

Clarify what is being asked and what a complete answer contains.
Work from the requirement backwards to the design.
State your assumptions explicitly before working the problem.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Rebuild the search projection while it serves nine thousand queries

Medium · projections · eventual consistency · rebuild · watermark

The read-model service answers about 9k queries/second at a 120 ms p99 from a projection built off the event log, normally under 2 seconds behind. A mapping change forces a full rebuild from resource_revision, during which apply lag rises to minutes. Writes continue at 1.2k/second and events at 4k/second. Design the rebuild: how the new index is populated and cut over, how position is tracked per log partition, what the API returns alongside results so a client can tell a stale answer from a current one, and the criterion for cutting over.

Approach

Build into a second index and swap an alias rather than mutating the live one. The rebuild is then reversible by pointing the alias back, so a bad mapping costs a wasted rebuild instead of an outage. The price is peak storage for two full copies and double apply load during catch-up, and both numbers should be stated up front rather than discovered when disk fills.
Track position per log partition, not globally. Order is guaranteed only within an aggregate's partition, so progress is a vector, and the only number safe to publish is taken from the least advanced partition - the slowest one is what bounds completeness. Publishing the most advanced partition's position declares the projection current while another partition sits twenty minutes behind.
Make apply idempotent so the backfill and the live tail can overlap without a freeze. Each document records the aggregate_version it reflects, and any event at or below that version is discarded. This is why the event carries the full fact and not a delta: a delta cannot be discarded safely, and a consumer that calls back to read current state applies a state newer than the event it is processing, which is how a projection ends up with changes applied out of order.
Turn lag into a contract instead of a surprise. Return the watermark with every result set, and return the version produced by a write so the client can compare the two. A client that wrote version 7 and receives results at a watermark older than its own commit can show that its change is still landing, rather than rendering the previous value as current. Blocking the read until the projection catches up would convert a staleness problem into an availability problem at 9k queries/second, and choosing not to do that is the trade.
Define the cutover numerically. Writes are untouched by the rebuild - they commit to the primary and land in the outbox - so the only coupling is apply throughput. If catch-up applies slower than the 4k events/second arriving, it never converges. The cutover criterion is that lag is measurably decreasing and below a stated threshold, not that the backfill loop reached the end of its range.

Worked solution (30 min)

Write the rebuild sequence: snapshot source, populate the second index, attach the live tail, verify, swap alias, retire the old index - naming what is reversible at each step.
Define the per-partition position record and the single watermark derived from it, and show what each would report when one partition stalls.
Write the idempotent apply rule using the document's recorded aggregate_version, and replay one event twice against it.
State the cutover threshold in lag terms and the measurement that shows convergence rather than completion.

Expected result: A parallel index populated from resource_revision snapshots plus the live tail, cut over by an alias swap that is reversible. Position is stored per log partition and the published watermark comes from the least advanced one. Apply is idempotent on the document's recorded aggregate_version, so backfill and tail can overlap without a freeze. Results carry the watermark and writes return their version so clients can detect staleness. Cutover happens when lag is decreasing and under the stated threshold.

Verify it yourself

Applying the same event twice leaves the document unchanged.
The published watermark never advances past the least advanced partition.
Pointing the alias back restores previous behaviour with no reindex.
Catch-up rate exceeds the 4k events/second arrival rate before cutover, shown by the lag trend rather than by the loop finishing.

Follow-up

The rebuilt index disagrees with the primary tables for 300 documents. Which is authoritative, and how do you decide without freezing writes?
The rebuild doubles load on the log and pushes the projection p99 from 120 ms to 400 ms. What do you throttle, and which signal sets how much?
Clients start polling until the watermark passes their write. What does that do at 9k queries/second, and what do you offer instead?

One customer endpoint stalls deliveries to every other destination

Medium · bulkhead · timeouts · saturation · retry amplification

The egress service delivers about 1.5k webhooks/second across 40,000 destinations, with a per-destination concurrency cap of 4 and a 10-second connect-plus-read timeout. Throughput falls to 300/second, queue depth climbs, and p99 delivery latency for unaffected destinations goes from 200 ms to minutes, while the error rate barely moves. One tenant holds 900 destination rows whose URLs share a hostname that now answers in 9.5 seconds. Explain the mechanism with the arithmetic, then give the containment in the order you would apply it.

Approach

Look at saturation before errors. A flat error rate with collapsing throughput says nothing is failing, things are waiting, so the first signal to pull is in-flight request count or pool wait time rather than the error counter. This is the distinction that decides the whole investigation.
Group in-flight work by resolved host, not by destination id. The cap is keyed per destination row, so 900 rows sharing one hostname buy 3,600 concurrent slots against a single host, each held for 9.5 seconds. The bulkhead was never a bulkhead for that host, and grouping by the wrong dimension is why the dashboard looked healthy.
Do the arithmetic in both directions. Required concurrency is arrival rate times latency, so 1.5k/second at 200 ms needs about 300 in flight, which is entirely consumed by 3,600 slow slots; conversely whatever concurrency is left sustains rate equals concurrency divided by 9.5 seconds, which is the 300/second you are seeing. Matching both numbers is what promotes this from a plausible story to the mechanism.
Explain why the circuit breaker never helped. It opens on consecutive failures, and a 9.5-second response inside a 10-second timeout is a success. Slow is not failing, so an error-rate breaker cannot see this; you need a slow-call ratio, a deadline propagated from the caller's remaining budget, or a concurrency limiter.
Contain in order: park the offending host so the shared pool drains, add a per-resolved-host concurrency cap alongside the per-destination one, give slow hosts their own queue so they cannot occupy the general pool, derive the timeout from the delivery deadline rather than a round number, and check the retry policy is not tripling load on a host that is already slow. Use backoff with full jitter so retries do not resynchronise on recovery.
State the invariant you are restoring: one tenant's endpoints degrade only that tenant's deliveries. That is a property to load-test for, not to assume from a config value.

Follow-up

The host recovers to 80 ms. How long does the queue take to drain, and what does the drain do to the recovered host?
Where should the 10-second timeout number actually come from?
If that tenant had one destination row instead of 900, would the cap of 4 have saved you? What would you measure to be sure?

Suggested practice checklist

For a candidate senior enough that the loop turns on design and judgement rather than on whether the coding round gets finished. Five days build one system properly and then stress it; coding gets a single maintenance day, on the assumption that the risk at this level is an unexamined tradeoff rather than a missed algorithm.

Day 1 — Numbers before diagrams

Build your own reference card of the figures you will re-derive all week: bytes for a realistic record, requests per second implied by a given daily active count, and the storage that a year at a given write rate produces. Derive each one rather than copying it, because the derivation is what survives a follow-up.
Turn one product statement into capacity requirements. From ten million daily users at four writes and forty reads each, state the peak-to-average factor you are assuming and why, then produce peak write QPS, peak read QPS and a year of storage.
Write the two numbers whose order of magnitude changes the design, the read-to-write ratio and the working-set size against memory per node, and state the threshold at which each one flips your answer.

Deliverable: A one-page numbers card and one worked capacity estimate with every assumption written down.

Day 2 — One system, from requirements to schema

Spend the first ten minutes producing only functional requirements, non-functional targets with numbers attached, a p99 latency, a durability expectation, a consistency requirement, and an explicit out-of-scope list.
Define the interface before the boxes: the three or four endpoints, their parameters, what each returns, and which of them are idempotent.
Write the data model, then write the single access pattern that justifies it, and state what the schema would have to become if the dominant access pattern were the other one.

Deliverable: One design carried to endpoint-and-schema depth, with non-functional targets expressed as numbers and a written out-of-scope list.

Day 3 — The consistency you are actually buying

Write out what a client sees under asynchronous replication when its write commits on the leader and its next read is served by a lagging follower, then write the two fixes, pinning that session's reads to the leader for a bounded window or carrying a version token the replica must reach, and the cost of each.
Work the quorum arithmetic on paper for N of three with W and R of two, and separate what R + W > N does guarantee, that any read set intersects any write set, from what it does not: on its own it is not linearizability, and a sloppy quorum that accepts writes on nodes outside the preference list breaks even the intersection.
Take two storage choices with different defaults, a single-leader relational store committing synchronously and a quorum-replicated store that converges eventually, and write the specific product behaviour that would be wrong under each, rather than a general statement about which is stronger.

Deliverable: A page separating what quorum overlap guarantees from what it does not, with one concrete product misbehaviour attached to each gap.

Day 4 — Failure is the design

For one write path, work through the case where the client times out after the server has already committed, then design the idempotency key: who generates it, how long it is retained, and what the duplicate request returns.
Express the retry policy as parameters rather than as a word: maximum attempts, base delay, backoff factor, jitter, and which error classes are retried at all. Then state why retrying a non-idempotent write without a key is a correctness bug and not merely waste.
Compute the fan-out effect on tail latency. If a request waits on ten backends and each independently exceeds its p99 one percent of the time, the chance at least one is slow is 1 - 0.99^10, about ten percent. Then write why independence is the optimistic assumption and what correlates them in practice.
Name the backpressure mechanism for one queue or one dependency in the design, a bounded queue with shedding or a concurrency limit, and write what the caller is told when it engages.

Deliverable: One write path with an idempotency design, a parameterised retry policy, and a written tail-latency calculation with its assumption named.

Day 5 — Scaling the hot path

Choose cache-aside or write-through for one read path and write the staleness window each produces, then name the invalidation event and what the system does when that event is lost.
Design against the stampede: either coalesce requests so only one recomputes a missing key, or refresh early with jittered expiry, and write why identical TTLs on keys populated in the same moment produce a synchronised expiry and a thundering herd.
Shard one table by a key you choose, then answer the two questions that break the choice: which queries now require a scatter-gather, and what happens to the distribution when one tenant is a hundred times larger than the median.
Write the cost of adding a node under plain modulo placement, where nearly every key moves, against consistent hashing, where roughly one key in n+1 moves, and state what virtual nodes are for.

Deliverable: A caching and sharding decision for one path, each with its failure mode and its rebalancing cost written beside it.

Day 6 — Keep the coding hand in, at the bar that applies to you

Solve one medium problem in thirty minutes, then spend twenty more making it production-shaped: named invariants, validation at the boundary, and errors that distinguish a caller mistake from an internal fault.
Write the tests you would require of a colleague's version of that function: one for empty input, one for the boundary, and one for the case the implementation is most likely to get wrong.
Read a piece of your own code from six months ago and write the change you would ask for, phrased as you would actually phrase it in review.

Deliverable: One problem hardened to review standard, with its test list and one written review comment.

Day 7 — Defend it while being interrupted

Run a forty-five-minute design mock with an interviewer briefed to change a requirement halfway, a tenfold traffic increase or a new strict consistency requirement, and to push on one number you estimated.
Rehearse the two sentences a senior loop is listening for: naming the tradeoff you are choosing against and why, and saying what you would measure to learn that the choice was wrong.
Prepare the design you regret: a real decision, the constraint that produced it, what it cost, and what you changed afterwards.

Deliverable: Mock notes recording how the design changed under the new requirement, plus a written account of one regretted decision.

Know where your numbers came from

Bring the two or three numbers the story rests on and know how they were collected. A p99 whose timer starts inside your handler excludes the time a request spent queued, so it can sit flat while users wait longer. Give the window, the percentile and what the measurement left out, or drop the number.

Why did you apply to Ameresco?

Medium · behavioural and engineering judgement

Approach

Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.
Give the blast radius: what could have broken, and what you measured.

Follow-up

What did you decide not to do, and why?
What would you do differently if you ran that again?

Describe yourself using adjectives.

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Name the disagreement and how you resolved it with evidence.
Close with what you would do differently, concretely.

Follow-up

What did you decide not to do, and why?
How did you know your change caused the improvement?

Did you have any difficult partners in a project?

Medium · behavioural and engineering judgement

Approach

State the situation in two sentences and spend the rest on the reasoning.
Close with what you would do differently, concretely.
Name the disagreement and how you resolved it with evidence.

Follow-up

How did you know your change caused the improvement?
What would you do differently if you ran that again?

Give an example of how you solved a process problem or issue.

Medium · behavioural and engineering judgement

Approach

Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.
Name the disagreement and how you resolved it with evidence.

Follow-up

How did you know your change caused the improvement?
What would you do differently if you ran that again?