Interview guides · Alberta Blue Cross

Alberta Blue Cross Software Engineer Interview Questions & Guide 2026

Debugging practice for Alberta Blue Cross software engineer candidates: reproduce it, narrow it, then change one thing per run.

The 60-second brief

A Software Engineer at Alberta Blue Cross plays a vital role in maintaining and evolving the digital infrastructure that supports one of the province's most trusted health and wellness organizations. You are responsible for building, refining, and securing the systems that allow members to access coverage, submit claims, and manage their health benefits efficiently. Your work directly impacts the daily lives of countless Albertans, ensuring that critical health services remain accessible and reliable.

For a design discussion, a catalogue of architectures is worth less than the ability to turn a vague requirement into a data model and an API contract. A box diagram with no schema under it collapses at the first follow-up question.

Focus areas

Make every write idempotent under retry
Paginate large result sets with keyset cursors
Trace a symptom to a mechanism under load

Overview

This role is unique because it balances modern technical requirements with the stability and tradition of a long-standing organization. You will often find yourself navigating complex legacy systems while contributing to modernizing workflows. Success in this position requires a blend of technical proficiency, a collaborative mindset, and the ability to articulate how your engineering choices support the broader goals of Alberta Blue Cross.

The data above provides a broad overview of compensation expectations for this role. Candidates should interpret these figures as a baseline, keeping in mind that total compensation may vary based on years of experience, specific technical expertise, and the complexity of the team you are joining. Use this information to benchmark your expectations during salary negotiations and to understand the market value of your skillset within the regional insurance sector.

The Alberta Blue Cross interview process

Alberta Blue Cross candidates report 2 rounds · ≈ 2-4 weeks. The stages below are what candidates describe, not a published process.

Written Assessments

What this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.

What to demonstrate

Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly

How to prepare

Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live

Panel Interview

Where the day includes a partner from product, design or data, that conversation is weighted like the technical ones and prepared for least. They are deciding one thing: whether having you in the room makes their decisions cheaper. That means options with costs attached, not implementation detail and not "it depends". An estimate someone can plan against — a range, the assumption that would push it to the high end, and what you would drop to hit the low one — is worth more than a confident single number, which everyone present already knows is wrong.

What to demonstrate

Whether an estimate comes as a range with the assumption most likely to break it, and states what a specific scope cut would actually buy
Whether a technical constraint is handed over as a choice with consequences on their side, rather than as a verdict they have no standing to argue with
Whether you establish what decision is on the table before proposing anything
Whether risk is raised while it can still change the plan, with the trigger that would confirm it, instead of reported afterwards as a slip

How to prepare

Take a project that shipped late and write the two-sentence warning you could have given three weeks earlier, naming what you would have needed decided at that point
Rehearse one estimate out loud until it arrives in three parts: the range, the single assumption that would blow it, and the smallest thing you would cut to protect the date
Rewrite an objection you have actually made — the "we can't do that" version — as two options with their costs, so the choice ends up with the person who owns it

Where candidates lose points

Assuming an isolation level prevents the anomaly you actually have

Isolation levels are named by the SQL standard but implemented differently, so any claim about one is only true of a named engine. PostgreSQL defaults to READ COMMITTED, where every statement takes a fresh snapshot, so two statements inside one transaction can legitimately disagree about the same row. Its REPEATABLE READ is snapshot isolation: it removes non-repeatable and phantom reads but permits write skew, where two transactions each read a set, each conclude their own write is safe, both commit, and the combined result violates a constraint that no single row expresses. Only SERIALIZABLE closes that, and it closes it by aborting a transaction with a serialization failure (SQLSTATE 40001), which means the guarantee is theoretical unless the application has a retry loop. InnoDB's REPEATABLE READ is a different mechanism again - plain SELECTs read a consistent snapshot while locking reads and writes see the latest committed row - so a read-modify-write inside one transaction can act on a value that the transaction's own earlier SELECT never returned.

Choosing an index from the columns a query mentions rather than from how it filters and orders

A composite B-tree index on (a, b, c) can be seeked only as a left prefix: equality on a, then equality on b, then a range or an ordering on c. A query that filters on b alone cannot seek into it at all and at best gets a full scan of the index; a query that filters a and ranges on b gets no benefit from c, because the index is only sorted by c within a fixed (a, b) pair. The practical consequence is that one index per column is close to useless for multi-predicate queries while a single correctly ordered composite index turns a scan into a lookup. The ordering half is what gets missed: if the index cannot satisfy the ORDER BY, the database must read every matching row and sort before the limit can apply, so a LIMIT 20 over a million matching rows still reads a million rows.

Designing for a scale nobody asked for

Ask for request rate, data size, read-to-write ratio and expected growth, then size the simplest option first; one relational instance on current hardware covers a large share of real workloads. Reaching for shards, queues and a cache tier before any number has been quoted reads as pattern-matching rather than judgement.

Quoting amortised or average cost as if it were a worst-case guarantee

Appending to a dynamic array is amortised O(1), but the append that triggers a resize copies every element, and hash lookup is constant only while the hash spreads the actual keys. Say which guarantee you are offering when the caller cares about the latency of one call rather than the total over many.

Questions & practice

Diff a projection against the primary without per-row point reads

Hard · reconciliation · range hashing · throttling

The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.

Approach

Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.
Pin the comparison to a point in time or it reports lag as drift: consider only rows whose updated_at is older than now minus a lag margin, and re-check each candidate mismatch individually before repairing. At 1,200 writes per second a diff without this reports thousands of false positives, and an unattended repairer would then overwrite live rows with stale values.
Make the run resumable and throttled: batch by range key, persist the last completed range, and watch a signal such as replica lag or primary CPU, pausing rather than pressing on. A reconciliation that cannot be stopped and resumed gets killed halfway and restarted from zero, which is how a repair becomes an incident.

Follow-up

The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?
How would you run this continuously at low cost instead of only as incident response?

Archive a resource graph without breaking live references or recursing

Medium · graph traversal · topological order · tenant isolation

Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.

Approach

Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.
Store the graph as CSR rather than a map of lists: an offsets array of V+1 8-byte entries plus E 8-byte targets is about 80 MB at this size, where boxed adjacency lists cost several times that and lose cache locality on every hop.
Run Kahn over the condensation for the order in O(V+E). If the emitted count is short of the component count the condensation step itself is wrong, since a condensation cannot contain a cycle, which makes the check free.

Worked solution (30 min)

Write the edge-loading query with the tenant predicate on both endpoints and state what it does with a cross-tenant edge.
Implement iterative Tarjan with an explicit stack and confirm on a three-node cycle that it emits one component of size three.
Build the transpose restricted to the visited set and mark every node with an in-edge from outside it as refused, carrying the referrer id.
Run Kahn over the condensation and verify the emitted order against the referrer-before-referenced rule.
Size the CSR arrays for 2,000,000 nodes and 8,000,000 edges and compare against a boxed adjacency map.

Expected result: An iterative O(V+E) traversal over a tenant-scoped CSR subgraph, SCC condensation so cycles archive atomically as one component, a transpose-based refusal list naming the external referrer for each blocked resource, and a Kahn topological order over the condensation, with recursion replaced by an explicit stack because of graph depth rather than style.

Verify it yourself

A two-node cycle with no external referrers archives as one unit, and adding a single external referrer moves both nodes to the refusal list.
No resource appears in the archive order before something that references it, except within its own component.
A counter on edge visits matches the loaded edge count exactly, confirming each edge is traversed once.

Follow-up

The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?
An edge points at a resource in another tenant. Is that a refusal, an error, or an alert?

Canonicalise a request body into a stable idempotency fingerprint

Medium · parsing · canonicalisation · hashing

idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.

Approach

Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.
Frame the hash preimage so concatenation cannot collide: delimit or length-prefix the method, path and body, otherwise one request's fields can be rearranged into another request with the same byte stream and the same fingerprint.
Name the refusals and their consequence: no case folding, no dropping of null-valued keys, no Unicode normalisation. Each makes two different requests fingerprint alike, and the resulting failure is the worst one this table has, since the second request is answered with the first one's stored response and its effect never happens.

Follow-up

A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
Where does the fingerprint get computed relative to request decompression and the body-size limit?
The endpoint takes 1,000 requests per second with 256 KB bodies. What does hashing cost, and does it belong at the edge or in the core service?

Denormalise tenant onto revisions and backfill it live

Hard · denormalisation · online migration · backfill

resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.

Approach

Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.
Step three, backfill: batch by primary key rather than by created_at so the cursor is dense and resumable — UPDATE resource_revision rr SET tenant_id = r.tenant_id FROM resource r WHERE r.resource_id = rr.resource_id AND rr.revision_id > $1 AND rr.revision_id <= $1 + 5000 AND rr.tenant_id IS NULL — committing per batch and persisting the cursor. Throttle on replica replay lag and on dead-tuple count, since each batch writes 5,000 new row versions. Run the backfill before the index exists so those updates can stay HOT.
Step four, index then enforce then contract: CREATE INDEX CONCURRENTLY (cannot run inside a transaction block, scans the table twice, waits on open transactions, and leaves an INVALID index to drop concurrently if it fails); ADD CONSTRAINT ... CHECK (tenant_id IS NOT NULL) NOT VALID, then VALIDATE CONSTRAINT, which takes only SHARE UPDATE EXCLUSIVE, after which SET NOT NULL uses the validated check instead of re-scanning on PostgreSQL 12 and later. Only then move the audit reads onto the column and, in a later deploy, delete the join path.

Follow-up

The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
How do you verify the backfill actually finished, given rows are still being inserted while it runs?
A resource must now be movable between tenants. What does that do to the composite foreign key and to the revisions already written?

Keep soft-deleted accounts from blocking re-registration

Easy · soft delete · unique constraints · engine differences

app_user holds user_id, tenant_id, email CITEXT, password_hash (NULL for SSO principals), email_verified_at, auth_version, status ('invited','active','suspended','deactivated'), created_at, updated_at, deleted_at. Two live accounts for one address inside a tenant must be impossible, but an address freed by a soft delete must be reusable, and the same tenant may delete and re-register it repeatedly. Write the uniqueness DDL for PostgreSQL 16, then the equivalent for MySQL 8 where partial indexes do not exist, and say what each permits once three deleted rows already hold that address.

Approach

Start from what is actually unique: not (tenant_id, email), but (tenant_id, email) among live rows. PostgreSQL says that directly — CREATE UNIQUE INDEX app_user_live_email ON app_user (tenant_id, email) WHERE deleted_at IS NULL. A full constraint over the same two columns burns the address permanently the first time someone deletes an account.
Keep case-insensitivity in the type or the index, never in the application: CITEXT as given, or UNIQUE (tenant_id, lower(email)) as an expression index where the extension is unavailable. A case-sensitive unique column is exactly how two accounts for one human appear.
For MySQL 8 the predicate has to move inside the key: add a discriminator column that is a constant 0 while the row is live and is set to user_id on delete, with UNIQUE (tenant_id, email, deleted_marker). Live rows share the constant and still collide; deleted rows differ from each other and stop colliding.
State the NULL variant and its dependency: leaving the marker NULL for deleted rows also works, because a unique index treats NULLs as distinct — true in MySQL, and true in PostgreSQL only under the default NULLS DISTINCT, which PostgreSQL 15 lets you reverse. Check the polarity against the three existing deleted rows: constant-on-live is what preserves the collision you want, and reversing it silently admits duplicate live accounts.
Say what a soft delete must do besides setting deleted_at: increment auth_version so existing tokens stop validating, leave resource.owner_user_id and resource_revision.actor_user_id intact, and accept that the address is retained — erasure is a different requirement answered by scrubbing the column, not by a DELETE that would break those references.

Worked solution (20 min)

Create the PostgreSQL partial unique index, insert a live row, soft delete it, and insert the same address again.
Repeat the delete-and-reinsert cycle three times and confirm three deleted rows coexist with exactly one live row.
Write the MySQL form with the discriminator, then deliberately reverse the polarity so live rows carry NULL, and show two live duplicates commit.
Attempt a second live insert on both engines and map the resulting 23505 / ER_DUP_ENTRY to the 409 the handler should return.

Expected result: PostgreSQL rejects only the second live row and admits unlimited deleted ones. MySQL behaves identically with UNIQUE (tenant_id, email, deleted_marker) where live = 0; with the polarity reversed, two live rows commit and nothing afterwards can tell them apart.

Verify it yourself

Group live rows by (tenant_id, lower(email)) after a randomised insert/delete run — no group exceeds one.
Inserting 'User@x.test' after 'user@x.test' is rejected; if it is accepted, the case handling is in application code rather than in the index.
EXPLAIN a login lookup and confirm the partial index is chosen — it is only usable by queries that carry the deleted_at IS NULL predicate, so a query without it falls back to a scan.

Follow-up

A deleted account re-registers with the same address the next day. Do the old resource rows follow the new user_id, and how does the API keep the two principals apart?
How do you honour an erasure request while resource_revision.actor_user_id still references this table?
What changes if a user may hold membership in two tenants?

Which is the most difficult situation you have ever faced in a professional setting?

Medium

Approach

Work from the requirement backwards to the design.
Clarify what is being asked and what a complete answer contains.
Say what you would check first and why it is the highest-information step.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

Your past experience does not seem to match with the position we are offering; why should we hire you?

Medium

Approach

State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

Specify the outbound webhook contract a customer endpoint can verify

Medium · webhooks · hmac · at-least-once · ordering

Egress delivery sends resource.created, resource.updated and resource.archived to roughly 40k customer endpoints at about 1.5k deliveries/second, with a per-destination concurrency cap of 4 and a 10 second connect-plus-read timeout, at-least-once from the relay. The receiver is code you do not control, often behind a proxy that may re-encode JSON. Specify the payload envelope, how the receiver verifies authenticity and rejects replays, what ordering it may assume, how it deduplicates, which status codes it should return and what each means to us, and the retry, circuit and replay behaviour.

Approach

Send the fact, not a pointer: event_id, event_type, aggregate_type, aggregate_id, aggregate_version, occurred_at and the payload copied from outbox_event. A receiver told only that resource 42 changed has to call back, and the call back returns a newer state than the event describes - that is precisely how a consumer applies changes out of order while believing it is following them.
Sign the exact bytes on the wire: HMAC-SHA256 over the timestamp, a separator, and the raw body, in a header, compared in constant time before the body is parsed. Instruct receivers to verify the raw bytes, never a re-serialised copy, since a proxy that reorders keys or changes whitespace invalidates a signature computed over re-encoded JSON. Reject a timestamp outside a tolerance - five minutes is typical - and keep a short seen-set of event_ids, because a capture replayed inside the tolerance still verifies.
Support key rotation by sending several signature values in one header during the overlap window and publishing that any one that verifies is sufficient. Without that rule a key rotation is a synchronised outage across every destination at once.
State the guarantee as it actually is: at-least-once and unordered, including within a single aggregate_id. The outbox is ordered per aggregate at the source, but the relay holds up to 4 requests in flight per destination and backs off each retry independently, so a version 6 delivery that needs one retry lands after a version 7 that succeeded on its first attempt. Publishing per-aggregate ordering we do not enforce is worse than publishing none, because a receiver that trusts it overwrites new state with old. Receivers deduplicate on event_id and apply conditionally - UPDATE ... WHERE aggregate_version < :incoming, or the same comparison under a row lock on the aggregate - which discards stale redeliveries and stays correct when two deliveries for one aggregate are processed at the same time. A duplicate and an out-of-order delivery then have the same outcome: no-op.
Define the response contract in the receiver's terms. 2xx means durably accepted, and accepting means writing it down - a receiver that does its processing inline inside our 10 second timeout will be retried while it is still working. 4xx is permanent and we stop. 429, 5xx and timeouts are retried with capped exponential backoff and full jitter within the per-destination concurrency cap, and a circuit opens after a run of consecutive failures and half-opens on a schedule, so a permanently dead endpoint costs one probe per interval instead of a growing queue.
Give them a recovery path that does not involve us holding a queue for everyone: a visible parked state, and a replay endpoint keyed by event_id or time range, so a receiver that was down for two hours asks for the gap on its own schedule.

Worked solution (30 min)

Write the envelope fields and mark which are needed for deduplication and which for discarding a stale delivery.
Write the signature string construction and the receiver's verification steps in order, including the constant-time compare and the tolerance check.
Write the receiver's idempotent apply: dedupe on event_id, then the version-conditional write that discards stale and concurrently delivered redeliveries.
Write the status-to-action table from our side: which codes retry, which stop, and what opens the circuit.
Describe the parked state and the replay call, including what the customer must supply.

Expected result: A self-contained signed envelope, verification over raw bytes with a replay window and a seen-set, an at-least-once guarantee that states delivery is unordered even within one aggregate, a version-conditional apply, a status table that distinguishes permanent from transient, and a customer-driven replay path.

Verify it yourself

Delivering the same event twice leaves the receiver's state identical to delivering it once.
Delivering version 7 and then version 6 for one aggregate leaves version 7 applied.
A destination that always times out costs one probe per circuit interval rather than a retry queue.

Follow-up

A customer insists an event never arrived. What do you check, in order, and which table settles the argument?
A receiver cannot store a version and asks us to deliver their events in order. What would the relay have to give up to offer that, and what does one failing event then do to the rest of their stream?

One log partition stops advancing while the others drain

Easy · poison message · head-of-line blocking · consumer lag · projections

Search results for a subset of tenants are hours stale; the rest are current. The projection consumer reports lag of zero on 15 of 16 partitions and 400,000 on one. Its error rate is flat and its CPU is idle. outbox_event has no pending rows older than a second, so the relay has published everything it holds. Identify the mechanism, give the ordered checks, and state what you do in the first ten minutes versus what you change permanently.

Approach

Read the lag distribution first. A slow consumer lags everywhere; zero on fifteen partitions and 400,000 on one is not throughput. Idle CPU on the stuck partition means the consumer is not advancing its offset at all, which points at one message it cannot get past rather than at a rate problem.
Exonerate the producer before touching the consumer. No pending outbox rows older than a second means the relay published, so the event exists in the log. This separates never sent from sent and never applied, which are different code paths and usually different owners.
Read the message at the stuck offset and the handler's log lines for its event_id. A flat error rate with no progress has two explanations and you must distinguish them: the handler is throwing and the retry loop is swallowing it, or the handler is blocking on something and never returning. Idle CPU with no error lines favours the second.
Mitigate before diagnosing further. Move the offending event to a dead-letter store and commit the offset past it. Adding consumers does nothing here, because a partition is consumed by exactly one member of the group, and the blast radius is every aggregate hashed to that partition, not only the aggregate that produced the bad event.
Fix permanently by bounding handler attempts and dead-lettering on exhaustion, so no single message can stop a partition. Then replay the dead-lettered event once the handler is fixed: it carries aggregate_id and aggregate_version, so a consumer that discards versions it has already applied can absorb the replay, and resource_revision is the fallback if the event itself is unusable.

Follow-up

The dead-lettered event carried aggregate_version 7 and the projection had applied 6. What must the replay do differently if 8 and 9 landed in the meantime?
How do you show staleness to the user while the partition is behind, given the API already returns the projection's watermark?
What changes if the message is poison because a previous deploy wrote a payload shape the current code cannot parse?

Suggested practice checklist

Day one measures instead of guessing, under a fixed rubric, and the remaining hours are allocated in proportion to the gaps before any studying begins. The allocation is deliberately not renegotiated midweek, because the area that feels worst on day three is usually the one that is moving.

Day 1 — Diagnostic, scored before you study anything

Sit a 110-minute diagnostic in four blocks: forty-five minutes on two coding problems, twenty-five on one design prompt taken to interface and data model, twenty of short-answer fundamentals, and twenty delivering two behavioural answers aloud.
Score each block from 0 to 3 on a fixed rubric where 3 is correct and fluent, 2 is correct but slow or prompted, 1 is partially correct and 0 is stuck, grading the artifact rather than how the attempt felt.
Allocate days two to five in proportion to 3 minus each block's score, write the allocation down, and commit to leaving it alone.

Deliverable: A scored rubric and a fixed hour allocation for the rest of the week.

Day 2 — Largest gap: find the boundary rather than the subject

Split the weakest area into named sub-skills and rate each separately. For coding those are restating the problem, choosing the structure, stating the invariant, turning the invariant into loop bounds, handling empty and single-element input, and accounting for complexity out loud.
Attempt three items positioned just above where the rating drops off, and for each write the first move you failed to make.
Re-attempt one of them from blank four hours later with nothing open.

Deliverable: A sub-skill map with the two blocking sub-skills circled.

Day 3 — Drill the blocking sub-skill by repeating the shape

Do eight short repetitions of the same shape rather than eight different problems, so what gets practised is the pattern and not the puzzle.
State the rule you now hold in one sentence, then test it against a case built to break it, a sliding window over an array containing negative values, or a cache-aside read path whose invalidation message is dropped.
Have someone else read your one-sentence rule and find the precondition you left out.

Deliverable: One rule statement with its preconditions attached and one counterexample that would have caught the incomplete version.

Day 4 — Second gap, plus maintenance on the strongest area

Run the same sub-skill decomposition on the second-largest gap in half the time.
Spend twenty-five timed minutes on the block you scored highest, choosing the hardest item you can still finish rather than a warm-up.
Write whether each area fails you on recall, on setup, or on execution, and set the fix accordingly: repetition for recall, a written checklist for setup, timed work for execution.

Deliverable: A second sub-skill map plus a one-line failure diagnosis for each area.

Day 5 — The gap that is not a skill

Record one technical and one behavioural answer, then count two things in the playback: seconds before your first clarifying question, and sentences you began without knowing where they would end.
Practise saying that you do not know, followed by how you would find out, without letting it soften into a guess, and practise stating a complexity or an estimate before being asked for it.
Redeliver one answer under a hard ninety-second cap, which forces structure ahead of detail.

Deliverable: Two recordings with a counted reduction in time-to-first-question.

Day 6 — Retest under day-one conditions

Sit the same 110-minute structure with new prompts of comparable difficulty and score it on the identical rubric.
For any block that did not move, change the method rather than adding hours: a block stuck at 1 usually means the practice was too varied, not too short.
Write down which single block you would still lose the offer on.

Deliverable: A second scored rubric placed beside the first, with one named remaining risk.

Day 7 — Full loop under interview conditions

Run a sixty-minute mock over the two blocks that moved least, with an interviewer briefed to interrupt and change direction mid-answer.
Write the recovery script for going blank: restate the question, state your assumption, name the first thing you would check.
Say every rule from the week aloud without reading it, and cut any you cannot state in a single sentence, since a rule you have to reconstruct mid-answer will not survive an interruption.

Deliverable: A one-page card holding the recovery script and only the rules you could state from memory.

The bug you decided not to fix

Engineers over-index on what they repaired. A stronger answer covers something you knowingly left broken: the alert you tuned down, the data inconsistency you documented instead of chasing, the cleanup you deferred past two quarters. Give the reasoning and the condition that would have reopened it, so it reads as a decision and not as neglect.

Do you want to be a technical leader or a people's leader?

Medium · behavioural and engineering judgement

Approach

Close with what you would do differently, concretely.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

What do you do in your spare time?

Medium · behavioural and engineering judgement

Approach

Give the blast radius: what could have broken, and what you measured.
State the situation in two sentences and spend the rest on the reasoning.
Pick a story where you made the decision, not one where you watched it.

Follow-up

How did you know your change caused the improvement?
What would you do differently if you ran that again?

Tell us about a time where you had to work on a team.

Medium · behavioural and engineering judgement

Approach

Give the blast radius: what could have broken, and what you measured.
Pick a story where you made the decision, not one where you watched it.
State the situation in two sentences and spend the rest on the reasoning.

Follow-up

What would you do differently if you ran that again?
What did you decide not to do, and why?

Describe a difficult situation with employees and how you handled it.

Medium · behavioural and engineering judgement

Approach

Close with what you would do differently, concretely.
Pick a story where you made the decision, not one where you watched it.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
What did you decide not to do, and why?