Interview guides · Air Space Intelligence

Air Space Intelligence Software Engineer Interview Questions & Guide 2026

Air Space Intelligence software engineer prep: algorithm drills where every complexity claim has to name the assumption under it.

The 60-second brief

As a Software Engineer at Air Space Intelligence, you will play a critical role in building advanced software solutions for some of the world's most complex and mission-critical operations. You will directly contribute to platforms utilized by major commercial airlines as well as U.S. and allied government organizations, helping operators gain a decisive advantage from initial planning stages through active execution. Your work will span high-stakes domains such as civil aviation, air traffic monitoring, and defense infrastructure.

Scope in the operational half of the job when the seat carries on-call. Rollout, rollback and what you would put on a dashboard belong inside a design answer rather than after it, and an answer that never reaches them reads as someone who has built systems but not run them.

Focus areas

Evolve APIs without breaking pinned SDK clients
Build at-least-once pipelines with explicit deduplication horizons
Bound blast radius with per-tenant concurrency limits

Overview

Your daily contributions will involve shaping the entire software development lifecycle, moving fluidly between building innovative products from scratch (0 to 1) and scaling or optimizing established systems (1 to n). You will operate in a dynamic, fast-paced environment where your code directly impacts operational outcomes in real-world scenarios. Collaborating closely with cross-functional teams, deployment strategists, and end-users, you will help push the boundaries of what is possible in automated decision-making and operational logistics.

Expect a high-ownership culture that demands technical excellence, architectural foresight, and resilience. While the problem spaces are intellectually demanding and require rigorous problem-solving, you will work alongside bright, passionate engineers dedicated to solving hard, meaningful problems. Success in this role requires a balance of core computer science fundamentals, adaptability to shifting priorities, and a drive to build reliable software for high-availability environments.

The Air Space Intelligence interview process

Air Space Intelligence candidates report 3 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Recruiter Screen

The person on this call usually cannot evaluate your code and does not need to. They write a short paragraph, and that paragraph is what a hiring manager skims when deciding who to put on your loop. So the test is not whether your work was hard, it is whether a non-engineer can repeat it correctly. Name systems by what they did rather than by their internal codename, give each project a shape (what was breaking, what you changed, what happened after), and keep the whole walkthrough near ninety seconds. Depth that cannot survive a paraphrase reads as vagueness.

What to demonstrate

Whether a non-engineer can restate your projects without distorting them, since their paraphrase is what travels to the hiring manager, not your sentences
Whether each project has a shape rather than a stack list: the failure or constraint, the change you made, the result and how it was measured
Whether you can say what was yours inside a team project without either inflating it or disappearing into the plural

How to prepare

Rewrite each headline project as two sentences with no internal system names and no acronyms outside your company, then say them to someone outside engineering and have them repeat them back. Fix whatever came back wrong
Attach one measured number to each project: the baseline, the change, and the window it was measured over. Where nothing was ever measured, say that plainly rather than reaching for a plausible percentage
Time the background walkthrough against a clock. If it runs past two minutes, compress the earliest role to a single clause and spend the recovered time on the most recent one

Technical Screening

Input bounds are the part of the prompt most often skimmed, and they usually contain the answer. They tell you which complexity class is admissible, which narrows the search before you have thought about the problem itself. As a rough planning figure, a compiled language does on the order of 10^8 simple operations per second and an interpreted one roughly an order of magnitude less. So n up to about twenty admits enumerating subsets, a few thousand admits a quadratic pass, and a million admits neither: you need near-linear, or linear with a log factor. If the bounds are missing, ask for them.

What to demonstrate

Whether the approach is justified by the stated input size rather than by whichever pattern you recognised first
Whether you ask about the properties that change the algorithm: whether the input arrives sorted, whether duplicates occur, whether values are bounded integers, whether it all fits in memory
Whether you can name the bottleneck in your own solution and what would remove it, even when you deliberately leave it in place
Whether a claimed speedup is real, since memoising a recursion only helps when subproblems genuinely overlap and the state can be keyed cheaply

How to prepare

For each algorithm you rely on, write down the largest n it handles in roughly a second, then check two of those figures by timing them in the language you will actually type in
For two weeks, write one line naming your target complexity and the bound that justifies it before you write any code, then compare that line with what you ended up submitting
Practise the conversion backwards: given a required O(n log n), list the mechanisms that get you there (sorting, a heap, an ordered map, divide and conquer) and choose by what the problem needs to query, not by what you used last

Final Round

A day like this is several different games in a row, and the expensive mistake is carrying the previous one into the next room. Coding rewards narrow precision and finishing inside a timer. Design rewards breadth, stated assumptions and naming what you are deliberately not building. Behavioural rewards specificity about people and decisions. Candidates who over-engineer a coding problem they were supposed to finish, or who start sketching class hierarchies before anyone has agreed what the system has to do, are usually still playing the last round. Between rooms, name out loud which game the next one is.

What to demonstrate

Whether the coding round ends with something that runs and has been traced against a degenerate input, rather than an extensible design that was never finished
Whether a design discussion opens by agreeing on traffic shape, read-to-write ratio and what is allowed to be stale, instead of proceeding from an architecture you arrived with
Whether a behavioural answer names a person, a disagreement and what you did about it, rather than describing the system the story happened inside
Whether the opening habits still appear late in the day: restating the problem, asking for constraints, saying the plan before typing

How to prepare

Book three mocks of different types back to back on one afternoon and ask each interviewer afterwards which round you answered in the wrong mode
Write a three-line opening script per round type — coding: restate, name the approach and its cost, then type; design: ask for scale, read-write mix and what must not break; behavioural: name the person, the stakes and the decision — and run it off a card so the switch is mechanical rather than remembered
Practise coding with a timer you do not extend, stopping when it stops, so the trained reflex is to finish a correct solution rather than to keep improving one

Where candidates lose points

One shared connection pool for every tenant and every query class

A single tenant with a large table and a missing index can occupy every connection with slow queries, and every other tenant then waits in connection acquisition -- a queue invisible in database metrics, because the database itself looks healthy while the application starves. Containment is bulkheads: separate pools or per-tenant concurrency caps for interactive requests, background jobs and exports, a statement timeout low enough that a pathological query dies before it accumulates, and an idle-in-transaction timeout so a stuck client cannot pin a connection and its locks indefinitely. One caveat worth knowing in advance: if a transaction-pooling proxy sits in front of the database, session-scoped behaviour changes, so session-level advisory locks and settings applied outside a transaction do not survive the way they do on a direct connection.

Treating a timed-out write as a failed write

A timeout says the response did not arrive, not that the work did not happen; the server may well have committed and then lost the connection. Retrying a non-idempotent create after a timeout is the standard way to end up with two of something, and those duplicates land precisely when the system is already degraded and least able to absorb them. The discipline is to treat a timeout as unknown: either the write carries an idempotency key so the retry is safe by construction, or the client re-reads authoritative state before deciding what to do, and the interface says unknown rather than showing a failure that invites a second click.

Optimising an axis nobody named

Ask which resource is actually scarce here: wall-clock latency, throughput, memory footprint, cost per request, or engineering time. Shaving a constant factor off an in-memory step is wasted effort when the same function makes a blocking remote call inside the loop.

Treating a network call as though it were a local function call

A remote call can be slow, fail, or return after you stopped waiting, so name the timeout, the retry policy, and what the caller sees while the dependency is down. A call with no timeout turns one slow dependency into an exhausted thread or connection pool in every service upstream of it.

Questions & practice

Chessboard or Breadth-First Search (BFS) pathfinding implementation

Medium · data structures and algorithms

Approach

Restate the input: its shape, its size, and what is guaranteed about it.
Walk one small example through your approach before writing the whole thing.
Name the brute-force solution and its complexity before improving on it.

Follow-up

What is the worst case, and how likely is it on real data?
How does this change if the input no longer fits in memory?

Implementing object-oriented programming (OOP) solutions for complex domain models

Medium · data structures and algorithms

Approach

Restate the input: its shape, its size, and what is guaranteed about it.
Walk one small example through your approach before writing the whole thing.
Choose the data structure from the access pattern, not from familiarity.

Follow-up

What is the worst case, and how likely is it on real data?
Which test case would catch an off-by-one here?

This category tests your core programming fluency, data structure knowledge, and ability to write clean, efficient code under time constraints.

Medium · data structures and algorithms

Approach

Walk one small example through your approach before writing the whole thing.
Restate the input: its shape, its size, and what is guaranteed about it.
Choose the data structure from the access pattern, not from familiarity.

Follow-up

How does this change if the input no longer fits in memory?
What is the worst case, and how likely is it on real data?

Schedule ordered webhook retries with a heap of subscription queues

Medium · heap · scheduling · backoff · head-of-line-blocking

Design the in-memory scheduler for webhook delivery. Up to 20 million rows sit in status pending or failed_retryable across 200,000 subscriptions, each row carrying next_attempt_at and attempt_count, and each endpoint having a circuit breaker. Deliveries for one subscription must be attempted in order, so at most one attempt per subscription may be in flight. Support due(now), complete(delivery, outcome) and insert(delivery) in O(log S), where S is the subscription count rather than the delivery count. Give the backoff formula you schedule retries with.

Approach

Key the global heap by subscription, not by delivery. Each subscription owns a FIFO of its due deliveries in event order; the heap holds one entry per eligible subscription, keyed by its head's next_attempt_at. That is 200,000 heap entries instead of 20 million, and it makes the one-in-flight rule structural rather than a check somebody can forget.
due(now): peek the minimum. If its key is in the future, sleep until then instead of spinning. Otherwise pop it, move the subscription into an in-flight set, and do not re-push it. A subscription absent from the heap cannot be dispatched twice, which is precisely how ordering is preserved.
complete: on success, drop the head and re-push the subscription keyed by its new head, or leave it out when the queue empties. On a retryable failure, increment attempt_count and set next_attempt_at = now + uniform(0, min(cap, base * 2^attempt)), sampled uniformly across the whole interval. That is full jitter; deterministic backoff re-synchronises the herd you just created.
Circuit breaker: park the subscription in a second heap keyed by its half-open time, so an endpoint dead for six hours costs one heap entry and zero attempts rather than consuming worker slots. Admit exactly one probe at half-open and close the breaker only on its success.
Say the price of the ordering guarantee out loud. One in-flight attempt per subscription means an endpoint answering in 10 seconds drains at 0.1 deliveries/second however many workers you run, and its backlog grows until it recovers. If the customer does not need order, allow k in flight and document delivery as unordered; that is the trade, and it is a product decision.
All three operations are O(log S) with O(S) resident heap memory and the queues themselves backed by the store. The database-backed equivalent is a partial index on (subscription_id, next_attempt_at) where status in ('pending','failed_retryable') claimed with FOR UPDATE SKIP LOCKED, and the write-back must be fenced on lease_token so a worker that stalled and resumed cannot overwrite a newer attempt.

Worked solution (30 min)

Define the four structures explicitly: queues: subscription_id -> deque[delivery], ready: min-heap of (next_attempt_at, subscription_id), inflight: set[subscription_id], breaker: min-heap of (half_open_at, subscription_id).
Write down the invariant you will assert after every operation: a subscription appears in at most one of ready, inflight and breaker, never in two.
Implement due, complete and insert, then simulate 200,000 subscriptions with Zipf-distributed queue depths totalling 20 million deliveries.
Add one endpoint that always times out after 10 seconds and one that always answers in 20 ms, then measure the fast endpoint's throughput with and without the per-endpoint breaker.
Instrument heap size across the run.

Expected result: Heap size stays at or below 200,000 regardless of the 20 million deliveries. The fast endpoint's throughput is unaffected by the dead one once the breaker trips. The dead endpoint's deliveries accumulate in their own deque and cost exactly one heap entry.

Verify it yourself

The asserted invariant never fires under concurrent workers.
Replaying the same delivery set twice produces identical per-subscription ordering, even though the interleaving across subscriptions differs.
Replacing full jitter with fixed backoff makes retry attempts cluster visibly in a histogram of attempt timestamps.

Follow-up

One subscription has 4 million queued deliveries. What stops it from starving the other 199,999, and what does your heap look like under that load?
A customer requests redelivery of last Tuesday's events. Where do those rows enter your structure, and what keeps them from reordering live traffic?
The process restarts. How much state do you rebuild, and what stops every subscription from being attempted in the same second?

Decide which facts an invoice line copies instead of joining

Medium · denormalisation · immutable records · foreign keys · rounding

invoice_line_item already denormalises tenant_id, which is reachable through invoice_id, and stores amount_minor even though quantity times unit_price_micros would recompute it. A reviewer asks you to normalise both away, and separately asks whether the tenant's legal name and billing address should be copied onto the invoice header. Decide each case. For every field you keep denormalised, name the read pattern or the invariant that justifies it, the anomaly the copy can develop, and the mechanism that prevents that anomaly here.

Approach

Split the question into two kinds of copy, because they fail differently. A copy of a currently mutable fact is a cache: it drifts and needs invalidation. A copy of a fact frozen at write time is not a cache at all, it is the record of what happened, and normalising it away destroys information the source no longer holds.
Keep tenant_id on the line. It costs 8 bytes, it leads every index on the table so no read is ever accidentally cross-tenant, and it turns a wrong join into an empty result rather than another tenant's money. Prevent the drift structurally: a unique constraint on invoice (invoice_id, tenant_id) plus a composite foreign key from the line on (invoice_id, tenant_id) makes a mismatched pair impossible, so the database enforces agreement instead of a code review.
Keep amount_minor. Rounding must happen exactly once, at a named site, with a stated mode (half-even here). If readers recompute from quantity and unit_price_micros, every reader owns a rounding decision, and half-up and half-even diverge systematically across thousands of lines rather than cancelling out. A check constraint can bound the stored value but deliberately cannot re-derive it.
Copy the legal name and billing address onto the invoice header, written once and never updated. The statement must show what was true when it was sealed, and the tenant record will change afterwards. This is a snapshot for the same reason source_rollup_watermark is stored per line: without it, nobody can reconstruct what the customer was told.
Name the read pattern that pays for all of it. Rendering, dispute response and export are per-tenant, per-period reads over thousands of lines that would otherwise join back to slowly changing dimensions that no longer hold the historical value. The write side is a once-per-period batch, so the extra columns cost nothing that matters.
Concede the case where the reviewer is right: a mutable operational attribute such as the tenant's current plan name has no business on a line. If a report wants it, join. If a statement needs the plan as of the period, that is another snapshot and it belongs on the header with the rest.

Follow-up

Write the composite foreign key and the unique constraint it requires on the parent. What does it cost on every line insert, and what does it do to a bulk load?
A tenant is renamed after being invoiced. Which rows change, and what does the customer see on last quarter's PDF?
Where does currency live, and what breaks if a tenant's billing currency changes between two periods?

Migrate a live partitioned event table without blocking ingest

Hard · online migration · ddl locks · expand and contract · partitioning

usage_event is range-partitioned daily on ingested_at, holds roughly 250M rows per day across 400 live partitions, and is written at 10-40k rows/second. Two changes are required: quantity must move from double precision to numeric(20,6), and a new environment column must become NOT NULL with a default of 'production'. Ingest cannot stop. Give the ordered plan, naming for each step the lock it takes, what that lock blocks, and roughly how long it is held. Identify the one step that cannot be rolled back cleanly once traffic depends on it.

Approach

Classify the two changes before planning anything. Adding a column with a non-volatile default has been metadata-only since PostgreSQL 11, so it is cheap. Changing double precision to numeric is not binary-coercible, so alter column ... type rewrites every partition under ACCESS EXCLUSIVE and rebuilds its indexes; on this volume that is hours of blocked ingest and is simply not an option, which is why the plan is expand-and-contract rather than one statement.
Expand: add quantity_numeric numeric(20,6) and environment with its default on the parent. Both are catalogue-only but both take a brief ACCESS EXCLUSIVE that cascades to partitions, so run each with lock_timeout set to a second or two and retry on failure. A queued ACCESS EXCLUSIVE request blocks every reader behind it, which is how a metadata-only change turns into an outage.
Dual-write: deploy producer code that populates both columns on every insert, and leave it running before anything reads the new column. This is the step that cannot be reverted cleanly. Once readers depend on quantity_numeric, reverting the writer leaves rows with a null there, and the gap is only discoverable by re-reading the old column, which the readers have stopped doing.
Backfill older partitions in batches keyed on the primary key, oldest first, committing every few thousand rows with a pause between batches, and skipping the partition still receiving writes until it rotates. Each batch is an ordinary UPDATE taking row locks only. The cost is bloat and WAL rather than blocking, so watch dead tuples and let autovacuum keep pace instead of wrapping 400 partitions in one transaction.
Make NOT NULL cheap with the three-step form: add constraint ... check (environment is not null) not valid (brief ACCESS EXCLUSIVE, no scan), then validate constraint (SHARE UPDATE EXCLUSIVE, scans while reads and writes continue), then set not null, which from PostgreSQL 12 uses the validated check and skips its own full scan. Do this per partition, then on the parent.
Switch and contract: move reads to the new column behind a flag, verify over a full period that both columns agree on freshly written rows, drop the old column (metadata-only), and only then remove the dual-write. Any index on the new column goes on with CREATE INDEX CONCURRENTLY per partition, since CIC is not supported on a partitioned parent: create the parent index with ONLY, build each child concurrently, then ALTER INDEX ... ATTACH PARTITION until the parent index becomes valid.

Worked solution (45 min)

On a scratch cluster, build 10 partitions of 2M rows each and run a writer at a few thousand inserts/second.
Run the naive type change and measure how long writes stall and how far ingest lag grows before killing it.
Run the expand step with lock_timeout = '2s' while the writer runs, and observe a clean lock timeout and retry instead of a pile-up of blocked readers.
Backfill in 5k-row batches and chart dead tuples and WAL generated per batch.
Run the not-valid, validate, set-not-null sequence and confirm from pg_stat_activity and timings that nothing held an exclusive lock through a full scan.
Add an index with CIC per partition plus ATTACH PARTITION and confirm the parent index reports valid only after the last attach.

Expected result: An ordered expand, dual-write, backfill, switch, contract plan with the lock named per step: metadata-only ADD COLUMN under a brief ACCESS EXCLUSIVE taken with lock_timeout; batched UPDATE backfill under row locks; CHECK NOT VALID, then VALIDATE under SHARE UPDATE EXCLUSIVE, then SET NOT NULL; CREATE INDEX CONCURRENTLY per partition with ATTACH PARTITION; and the dual-write-to-read switch identified as the step that cannot be reverted cleanly.

Verify it yourself

No step in the plan holds ACCESS EXCLUSIVE for longer than the configured lock_timeout.
The writer's error rate stays at zero through the rehearsal apart from the deliberate lock timeout.
After VALIDATE, SET NOT NULL completes in milliseconds on a table where the naive form scanned every row.
Freshly written rows agree on both columns for a full verification period before the old column is dropped.

Follow-up

A CREATE INDEX CONCURRENTLY fails halfway through the partition list. What state is the table in, how do you detect it, and what do you run?
The producer computes quantity itself. What happens to a request already in flight when the dual-write deploy lands, and does it matter?
Give two queries that prove the backfill is complete: one cheap enough to run every minute, one authoritative.

Design a system architecture for an API providing real-time flight status gathered from multiple disparate sources

Medium · system design and architecture

Approach

Choose a partition key and say what query it makes expensive.
Name the failure you are designing for, then the recovery path.
State the consistency you need, and where you are willing to be stale.

Follow-up

What would you drop to keep the system up under load?
How does this behave when that dependency is down for an hour?

Air traffic monitoring system design focusing on high availability and low latency

Medium · system design and architecture

Approach

Name the failure you are designing for, then the recovery path.
Choose a partition key and say what query it makes expensive.
Name the read and write paths separately; they rarely have the same bottleneck.

Follow-up

How does this behave when that dependency is down for an hour?
What breaks first when traffic grows ten times?

Build a scalable system to track unique drone IDs and handle duplicate data streams efficiently

Medium · system design and architecture

Approach

Fix the scope first: who calls this, how often, and what they do when it fails.
Name the read and write paths separately; they rarely have the same bottleneck.
Name the failure you are designing for, then the recovery path.

Follow-up

How does this behave when that dependency is down for an hour?
What would you drop to keep the system up under load?

Do you prefer building from 0 to 1 or scaling from 1 to n, and why?

Medium

Approach

Clarify what is being asked and what a complete answer contains.
State your assumptions explicitly before working the problem.
Say what you would check first and why it is the highest-information step.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Make run creation safe when the client times out and retries

Medium · idempotency · retries · outbox

POST /v1/runs inserts a job_run row and dispatches a sandbox. The caller is a customer's CI pipeline with a 10-second timeout and three automatic retries. A run that takes 12 seconds to start returns after the client has already given up, so the retry starts a second sandbox and bills it. Redesign the endpoint: the key the client sends, its scope and storage, what happens when the same key arrives with a different body, what happens when a retry arrives while the first request is still in flight, and how long the key stays honoured.

Approach

Name the defect before designing: the client's timeout is an unknown outcome, and the naive shape gives it no way to ask whether the earlier call landed, so its only choices are to duplicate the run or to drop it.
Require an Idempotency-Key header scoped to (tenant_id, key) rather than to the credential, so a rotated or replaced credential still replays. Store the key with a request fingerprint, SHA-256 over method, path and the canonicalised body, plus state, the stored response status and body, and the resulting run_id.
Make the claim a write rather than a read: insert the key row inside the same transaction as the run under unique (tenant_id, idempotency_key). The loser of a concurrent race takes a unique violation and then reads the winner's row, which is what makes the duplicate case deterministic instead of timing-dependent.
Define three outcomes precisely. Same key, same fingerprint, completed: replay the stored response with a header marking it a replay. Same key, different fingerprint: 422 with an idempotency_key_reuse code, never the stored response. Same key still in flight: 409 with Retry-After, because blocking the second caller holds a connection for the duration of someone else's request.
Close the dispatch gap with an outbox row committed alongside the run and a relay that enqueues it. Commit-then-publish loses the dispatch if the process dies in between; publish-then-commit hands a worker a run_id that does not exist yet.
Set retention from the client, not from storage cost: the key must outlive the caller's worst-case total retry window, so publish a number such as 24 hours and state that a key reused after expiry legitimately creates a second run.

Worked solution (30 min)

Draw the timeline of the failing case: commit at t=11s, client abandons at t=10s, retry at t=10.1s, and mark where the second sandbox starts.
Write the idempotency table DDL with the unique constraint and the fingerprint column, then the single transaction that inserts both rows.
Enumerate the four arrival cases (first, replay, conflicting body, in-flight) and write the exact status, headers and body for each.
Add the outbox row to the same transaction and describe the relay's at-least-once behaviour and why the worker must tolerate a duplicate dispatch.
State the retention horizon and the sentence that goes in the public docs about key reuse after expiry.

Expected result: One transaction inserting job_run plus an idempotency row under unique (tenant_id, idempotency_key) and an outbox row; replay returns the stored response, a conflicting fingerprint returns 422, an in-flight duplicate returns 409 with Retry-After, and the horizon is published as a number.

Verify it yourself

The concurrent-duplicate case is resolved by a constraint violation, not by a prior SELECT.
No path returns the stored response for a different request body.
There is no window where the run is committed but the dispatch is not, or the reverse.
The key scope contains the tenant, and nothing in it is derived from the credential.

Follow-up

The SDK generates a fresh key on every attempt rather than reusing one. What in your response surface makes that visible instead of silently doubling the bill?
How does this interact with job_run.parent_run_id: is an automatic retry of a failed run the same object as a client retry of the request?

Regional error rate explodes after a dependency merely slows

Hard · retry storm · circuit breaker · partial outage

A control-plane read replica in one region degrades from 4 ms to 120 ms. Within ninety seconds that region's gateway error rate rises from 0.01% to 40% and its p99 becomes bimodal, one mode near the old p99 and one at the client timeout. The other two regions are unaffected. The gateway retries control-plane reads three times with exponential backoff and no jitter. Give an ordered checklist that separates trigger from amplifier, the offered-load arithmetic, and the controls that break the loop.

Approach

Split the incident into three questions before touching a control: what started it, what amplified it, and what would make recovery slow. Here they are the replica slowdown, the retry policy interacting with queueing, and a synchronised unjittered herd at recovery. They are different mechanisms and each needs its own control.
Read the distribution rather than the mean. A bimodal p99 with one mode pinned at the client timeout is two populations, not one degraded path; split latency by cache hit and miss and confirm the fast mode is hits and the timeout mode is misses that reached the replica.
Do the load arithmetic. Three retries turn one client request into up to four upstream requests, so offered load reaches roughly 4x on a dependency that is already slower, and it arrives at the worst moment. With utilisation approaching one, queueing delay grows superlinearly, which is why a 30x latency increase upstream does not produce a 30x increase downstream, it produces timeouts.
Break the loop with controls that bound offered load rather than with more attempts: a concurrency limit on the control-plane client so at most N calls are in flight and the remainder fail fast, a circuit breaker scoped per dependency and region, and a retry budget capping retries at a small fraction of base traffic so amplification has a ceiling that does not depend on how many clients are retrying.
Add full jitter to whatever retries survive, sleeping uniformly in [0, min(cap, base x 2^attempt)], so attempts de-correlate instead of arriving in waves aligned to the moment of failure.
Decide the unreachable-dependency behaviour in advance, because it is the actual product decision underneath: serving from an expired credential cache keeps the product available while extending a revoked key's life past the stated bound, and failing closed converts a dependency degradation into a total outage. State the mode and the staleness number rather than letting the timeout choose.

Follow-up

The replica recovers. Describe what happens in the first ten seconds with your controls in place versus without them.
Which single metric would have paged before the error rate moved, and why is upstream latency by itself not it?
Requests that fail fast under the concurrency limit still need an answer. What does the gateway return, and what does it do to the usage event it would otherwise have emitted?

Suggested practice checklist

Roughly ninety minutes on weeknights with one longer weekend block. The plan cuts scope rather than compressing everything, on the assumption that one thing finished per night beats four half-started.

Day 1 — Fix the scope and take a cold baseline

Read the role description and write the three things the loop will almost certainly test, then write an explicit not-doing list and keep it visible all week.
Take one twenty-five-minute coding problem and one fifteen-minute design prompt cold, and write the single sentence naming what blocked each, because those two sentences decide where the remaining evenings go.
Set the week's rule: one thing finished every night, including the night you only have forty minutes.

Deliverable: A one-page scope with a not-doing list and two cold attempts, each carrying one sentence on what blocked it.

Day 2 — One pattern, written three times from blank

Choose the single pattern most likely to appear in your loop and write it three times from an empty file rather than editing the previous attempt.
On the third pass, write the invariant as a comment before the loop body and the complexity before the first line of code.
Stop at ninety minutes even if the third version is imperfect, and write the one thing you would fix given another hour.

Deliverable: Three independent implementations of the same pattern plus a note on what changed between them.

Day 3 — One design, only to the depth you can defend

Take one system shape and go only as far as requirements, interface and data model, refusing to draw a box you could not survive a follow-up about.
Attach one number to each non-functional requirement, deriving it rather than asserting it, and write the assumption the number rests on.
Write the one tradeoff you are choosing against and the observation that would make you reverse it.

Deliverable: One design at interface-and-schema depth with derived numbers and one written reversible tradeoff.

Day 4 — Only the fundamentals you will have to defend

Write, in under two hundred words each, the answers to the two questions that follow almost any implementation: why this structure and not the obvious alternative, and what happens to this code at a hundred times the input.
Write what an index actually costs: faster lookups on the indexed columns against a write that now maintains a second structure, plus the cases where the planner declines to use it anyway, low selectivity, or a predicate wrapping the column in a function.
Delete any answer you cannot deliver aloud in under a minute, since an answer that needs reading is not an answer you have.

Deliverable: Three written answers, each under two hundred words and each timed aloud.

Day 5 — Your own work, timed

Write a ninety-second and a four-minute version of your main project and time both aloud rather than reading them.
Prepare the two follow-ups that always come: what you would do differently, and how you knew it worked.
Put one number in the first sentence and be ready to say exactly where it came from and what it excludes.

Deliverable: Two timed narratives with one defensible number in the opening line.

Day 6 — The one full rehearsal, in the weekend block

Run a sixty-minute mock covering a coding round and a design round in one sitting with no break, because sustained attention is the thing evenings have not trained.
Immediately afterwards, and before hearing any feedback, write the three moments you lost the thread.
Spend the rest of the block only on those three moments, and on nothing you merely feel shaky about.

Deliverable: Mock notes naming three failure moments with a specific fix written under each.

Day 7 — Taper

Write the twenty-minute warm-up you will actually do on the morning: one problem you can already solve from a blank file, one design you can narrate, and nothing you have never seen.
Re-read only your own notes from this week and open no new material.
Write the logistics down: the editor or shared document you will be working in, whether execution and lookups are permitted, and the sentence you will use when you do not know something.

Deliverable: A one-page card holding the design structure, the project numbers, and the logistics.

The bug you decided not to fix

Engineers over-index on what they repaired. A stronger answer covers something you knowingly left broken: the alert you tuned down, the data inconsistency you documented instead of chasing, the cleanup you deferred past two quarters. Give the reasoning and the condition that would have reopened it, so it reads as a decision and not as neglect.

Walk through a project you built that you are most proud of and explain your specific contributions

Medium · behavioural and engineering judgement

Approach

Close with what you would do differently, concretely.
Give the blast radius: what could have broken, and what you measured.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

This category explores your engineering history, collaboration style, and alignment with the mission-driven nature of the company.

Medium · behavioural and engineering judgement

Approach

Close with what you would do differently, concretely.
State the situation in two sentences and spend the rest on the reasoning.
Name the disagreement and how you resolved it with evidence.

Follow-up

What would you do differently if you ran that again?
What did you decide not to do, and why?

Ship metered billing with a named deduplication horizon

Medium · technical debt · deduplication · deadline pressure · detectors

Metered billing must be on in three weeks. usage_event is partitioned daily, so its unique index must include the partition key and deduplicates only within a day: a producer retry that crosses midnight, or a replay run a week later, gets through. A cross-partition dedup store is two weeks you do not have. Describe shipping with debt you named in advance: what you shipped, what you wrote down, the detector you added, the trigger and date for paying it off, and what you would have refused to ship under the same pressure.

Approach

Show you can separate the two kinds of debt, because that distinction is what the question actually probes. Debt that costs engineering time later is shippable on a deadline. Debt that silently corrupts a number a customer gets charged for is not shippable unless the corruption is detectable, and detectability is the whole negotiation.
Make the exposure narrow and measured rather than gestural. The hole is duplicates whose occurrences straddle a UTC day boundary, plus any replay older than partition retention. Measure it before arguing about it: how often an idempotency_key recurs at all, and the distribution of the gap between first and last occurrence. If the ninety-ninth percentile of that gap is four minutes, the residual risk is a small band around midnight and you can say so numerically.
Add the detector before the feature, not after. A nightly job counting keys that appear in more than one partition is one grouped scan over recent partitions, and it converts a silent overcount into a page. State what it costs to run and what it fires on.
Buy the cheap half of the real fix immediately: extend partition retention so the dedup horizon exceeds the producer's maximum retry window plus the longest replay you intend to support. That reframes retention as a correctness parameter rather than a storage cost, which is the sentence you need on record before someone optimises the bill.
Make repayment mechanical instead of aspirational: a dated entry with a named owner, plus a threshold that pulls the date forward — first detector hit above N events, or first customer dispute. Debt with a trigger gets paid; debt with only a date does not.
Answer the second half honestly by naming what you would refuse under identical pressure: the sealing path, because a sealed row is frozen and a wrong number there stops being a bug and becomes an adjustment line, a dispute and an audit question.

Follow-up

The detector fires on forty duplicate events for one tenant, and two of their invoices have already sealed. What happens next?
Whom did you tell that the billing numbers had a known hole, and in what words?
Finance asks you to cut storage by shortening partition retention. What do you say, and to whom?