Interview guides · Agfa

Agfa Software Engineer Interview Questions & Guide 2026

Testing practice for Agfa software engineer candidates: the boundaries worth covering, and why flakiness is a real defect.

The 60-second brief

As a Software Engineer at Agfa, you are at the intersection of high-stakes medical imaging technology and complex software architecture. You are not just writing code; you are building the digital backbone that supports healthcare professionals in critical environments. Whether you are working on cloud-based infrastructure, automated testing frameworks, or specialized medical imaging software, your contributions directly impact the efficiency and reliability of systems that hospitals and clinics depend on daily.

The loop does not sample the job evenly, and arguing about that in the room costs you. Daily work is mostly incremental change inside code someone else wrote, while the loop samples narrow slices of it; prepare for the slices and save the realism argument for your questions at the end.

Focus areas

Make every write idempotent under retry
Paginate large result sets with keyset cursors
Choose indexes from the query's access path

Overview

This role requires a blend of rigorous technical precision and a genuine commitment to engineering excellence. You will often find yourself navigating legacy systems while simultaneously pushing for modern cloud or automation solutions. The environment at Agfa is intellectually demanding, requiring you to balance the need for stability in medical-grade software with the agility required to innovate in a fast-paced global market. It is a position for engineers who value the tangible, real-world impact of their work and enjoy solving problems that span across software, hardware, and workflow design.

The Agfa interview process

Agfa candidates report 4 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Initial Screening

The person on this call usually cannot evaluate your code and does not need to. They write a short paragraph, and that paragraph is what a hiring manager skims when deciding who to put on your loop. So the test is not whether your work was hard, it is whether a non-engineer can repeat it correctly. Name systems by what they did rather than by their internal codename, give each project a shape (what was breaking, what you changed, what happened after), and keep the whole walkthrough near ninety seconds. Depth that cannot survive a paraphrase reads as vagueness.

What to demonstrate

Whether a non-engineer can restate your projects without distorting them, since their paraphrase is what travels to the hiring manager, not your sentences
Whether each project has a shape rather than a stack list: the failure or constraint, the change you made, the result and how it was measured
Whether you can say what was yours inside a team project without either inflating it or disappearing into the plural

How to prepare

Rewrite each headline project as two sentences with no internal system names and no acronyms outside your company, then say them to someone outside engineering and have them repeat them back. Fix whatever came back wrong
Attach one measured number to each project: the baseline, the change, and the window it was measured over. Where nothing was ever measured, say that plainly rather than reaching for a plausible percentage
Time the background walkthrough against a clock. If it runs past two minutes, compress the earliest role to a single clause and spend the recovered time on the most recent one

Technical Rounds

What this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.

What to demonstrate

Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly

How to prepare

Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live

Behavioral Discussions

Many of these questions are about something that went wrong, and the grading sits mostly in the hours after you knew. Who found out first, whether that was you or an alert or a user, how long it took you to say it out loud, and whether the people who needed the news got it while they could still act on it. Engineers under-tell this part because it feels like confessing. The pattern it is looking for is the opposite: the quiet fix, an incident absorbed without telling anyone, after which nothing changed and the same failure is still available.

What to demonstrate

How the problem was found, and whether that route was one you had built or one that happened to you, since a user reporting it first means your instrumentation did not cover that failure
Whether time-to-detect and time-to-tell are separate numbers in your account and whether you know both, because a fast fix that nobody heard about until the retro is a different answer from a slow one that was announced immediately
Whether the resolution left something durable behind, a check that fires or a default that changed, rather than depending on people remembering to be careful
Whether you can say what the failure cost without either inflating it or waving it away

How to prepare

Reconstruct one incident you were part of as a timeline with clock times: first bad request, first signal, first person who knew, first message outside the team, mitigation, permanent fix. The gaps between those entries are what gets asked about
Look up the configuration of the signal that caught it, including its evaluation window and threshold. An alert defined on a five-minute aggregate cannot fire until the condition holds across that window, which puts a floor under time-to-detect that has nothing to do with how severe the failure was. Be able to say what that floor was and whether anyone had chosen it deliberately
Prepare one story where you escalated early and the severity turned out to be smaller than you thought, including what it cost the people you pulled in. Without it, every answer you give about raising alarms is unfalsifiable

Final Interviews

Coding rounds mostly set a floor. They decide whether you clear the bar, not where you land on the ladder. Level tends to come out of the design discussion and the ownership stories, so the question worth auditing beforehand is whether the scope you describe matches the scope of the job. Work that stops at your own service, or a story whose hard part was writing the code rather than getting several people to agree on an interface, reads a level below where you think you are interviewing, and that gap is usually resolved downwards.

What to demonstrate

Whether the largest thing you describe owning ran end to end — the decision, the migration path, the rollout, and what you did when it went wrong — or stopped at the change you merged
Whether design answers include what you would not build, what you would defer, and what you would measure before committing, rather than only what the boxes are
Whether a disagreement in a story was settled with something checkable — a benchmark, a prototype, a written proposal — instead of by seniority or by waiting it out
Whether you can say which calls you made alone and which you escalated, and why the line sat where it did

How to prepare

Write your largest piece of owned work as a timeline of decisions — who decided what, when, and what you did when the plan broke — then delete every sentence whose subject is "we" and see how much survives
Take one system you know well and drill the migration answer: how old and new paths run side by side under live traffic, how you compare their outputs, what the rollback is once writes are going to both, and which step you would not automate
Map each line of the ladder in the job posting to a specific thing you have done, find the line you cannot support, and prepare the closest evidence you have plus an honest account of the gap

Where candidates lose points

Assuming an isolation level prevents the anomaly you actually have

Isolation levels are named by the SQL standard but implemented differently, so any claim about one is only true of a named engine. PostgreSQL defaults to READ COMMITTED, where every statement takes a fresh snapshot, so two statements inside one transaction can legitimately disagree about the same row. Its REPEATABLE READ is snapshot isolation: it removes non-repeatable and phantom reads but permits write skew, where two transactions each read a set, each conclude their own write is safe, both commit, and the combined result violates a constraint that no single row expresses. Only SERIALIZABLE closes that, and it closes it by aborting a transaction with a serialization failure (SQLSTATE 40001), which means the guarantee is theoretical unless the application has a retry loop. InnoDB's REPEATABLE READ is a different mechanism again - plain SELECTs read a consistent snapshot while locking reads and writes see the latest committed row - so a read-modify-write inside one transaction can act on a value that the transaction's own earlier SELECT never returned.

Letting a slow dependency consume unbounded concurrency

The failure that takes a service down is usually not an error but a delay. A dependency answering in thirty seconds instead of fifty milliseconds holds each request's worker or connection six hundred times longer, and since required concurrency is arrival rate times latency, a fleet sized for sixty in-flight requests now needs thirty-six thousand to sustain the same rate - so it queues, and requests whose clients have already abandoned them still occupy resources. Retries make it precisely worse: a policy of three attempts triples the load on a dependency at the exact moment it is least able to serve, which is how one slow dependency becomes an outage of everything sharing that pool. Containment is four specific things - a timeout on every outbound call shorter than the caller's remaining budget, a bounded pool per dependency so one cannot starve the others, backoff with full jitter rather than a fixed delay so retries do not resynchronise, and a circuit that stops sending once the failure rate makes an attempt pointless.

Hardcoding to the sample inputs

Solve the stated problem rather than the two examples; special-casing a literal to make a sample pass is obvious immediately and reads as either a misunderstanding or an attempt to fake progress. If you genuinely cannot generalise yet, say which part is a stub and what would replace it.

Sorting when the problem never required a total order

Match the algorithm to the guarantee actually needed: the top k comes from a size-k heap in O(n log k) time and O(k) space, distinctness needs a set rather than an ordering, and a small bounded integer key range admits a linear counting pass. A full O(n log n) sort is the right default only when you genuinely need everything in order.

Questions & practice

Diff a projection against the primary without per-row point reads

Hard · reconciliation · range hashing · throttling

The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.

Approach

Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.
Pin the comparison to a point in time or it reports lag as drift: consider only rows whose updated_at is older than now minus a lag margin, and re-check each candidate mismatch individually before repairing. At 1,200 writes per second a diff without this reports thousands of false positives, and an unattended repairer would then overwrite live rows with stale values.
Make the run resumable and throttled: batch by range key, persist the last completed range, and watch a signal such as replica lag or primary CPU, pausing rather than pressing on. A reconciliation that cannot be stopped and resumed gets killed halfway and restarted from zero, which is how a repair becomes an incident.

Follow-up

The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?
How would you run this continuously at low cost instead of only as incident response?

Find overlapping job attempts and peak concurrency from lease records

Medium · sweep line · intervals · leases

A day of job_run history yields about 50,000,000 attempt records: (job_run_id, job_type, attempt, started_at, finished_at which is NULL when the worker died, lease_expires_at). Leases expire on a clock, so a job that outran its lease ran twice. Produce (a) every job_run_id whose attempts overlapped in wall-clock time and (b) the peak number of simultaneously running attempts per job_type with the minute it occurred. Target O(n log n). State how you treat a NULL finished_at and what clock skew does to your answer.

Approach

Define the interval before sorting anything: an attempt occupies [started_at, COALESCE(finished_at, lease_expires_at)). finished_at is observed and lease_expires_at is only a promise, so every attempt without a finish contributes an estimate and the whole result is a lower bound on overlap rather than an exact count.
For peak concurrency, sweep: emit 2n endpoints, sort by (timestamp, kind) with ends ordered before starts at equal timestamps, then walk the sequence maintaining a counter per job_type and record each type's maximum with its timestamp. O(n log n) dominated by the sort, O(n) space, or O(1) extra if the sort is external and the walk streams.
For overlap detection, do not compare attempts pairwise. A single global sort by (job_run_id, started_at) gives both the grouping and the order; within a group, keep the maximum end seen so far and report an overlap exactly when the next start is less than that running maximum, which is one linear pass after the sort.
Half-open intervals matter and are easy to get wrong: with closed intervals an attempt ending at the same millisecond another begins reads as concurrency two, and across 50,000,000 records that artefact swamps the real signal.
State the clock caveat: started_at and finished_at are written by different workers, so under skew of a few hundred milliseconds an apparent overlap shorter than that bound is not evidence. Filter reported overlaps by a minimum duration, or prefer timestamps written by whichever component heartbeats the lease.
Scale the sort rather than assuming it fits: the sweep emits two endpoints per attempt, so 50,000,000 records become 100,000,000 endpoints, and at roughly 24 bytes each, an 8-byte timestamp plus a 4-byte job_type plus a kind flag padded to alignment, that is about 2.4 GB of sort keys before any scratch space. Either push the ordering into the database behind an index on (job_type, started_at) or run an external merge sort in chunks; the overlap pass sorts n records rather than 2n, so it is the cheaper of the two.

Follow-up

A handler is not idempotent and you have found 400 overlapping jobs. Which of them actually caused damage, and what would you query to find out?
Peak concurrency for one job_type is 4 against a configured cap of 4. Is the cap working, or is the data hiding attempts that never started?
How would you compute both answers incrementally as records arrive rather than in a daily batch?

Identify the heaviest tenants in a five-minute window under memory pressure

Medium · top-k · heavy hitters · streaming

The edge service handles about 3,000 requests per second across roughly 50,000 tenants, peaking near 9,000. Expose the 50 heaviest tenants by request count over the trailing five minutes so limits can be tightened before one tenant's backfill starves the fleet. You may not retain five minutes of raw records. Give the exact solution and its memory, then the bounded-memory approximation with its error stated as a formula, and say which you would ship and at what tenant cardinality that choice changes.

Approach

Do the exact version first, because it is affordable at this cardinality: a ring of 300 one-second counters per tenant, advanced lazily, is 1,200 bytes of counters per tenant and roughly 60 to 90 MB for 50,000 tenants with overhead. Carry a running total and subtract the bucket you overwrite so a window read is O(1) rather than 300 adds.
Extract the top 50 with a size-k min-heap over the tenant sums: O(d log k) for d tenants, against O(d log d) to sort them all. Maintaining the heap continuously instead of on query requires a tenant-to-heap-index map, because incrementing a count already inside the heap means sifting from a known position, and without that map you rebuild the heap on every request.
State the approximation precisely rather than gesturing at sketches. Misra-Gries with m counters retains every item whose true count exceeds N/(m+1), and each retained count underestimates the truth by at most N/(m+1). With m = 1,000 and N = 900,000 requests in the window the error is roughly 900 requests, which is fine for spotting a tenant sending 50,000 and useless for ranking two tenants 200 apart.
Say what breaks when the window slides: Misra-Gries and Space-Saving are insert-only and cannot be decremented as records age out. The workable construction is one summary per sub-window, say ten seconds, with 30 summaries merged at query time, and the merged error is the sum of the per-summary errors, so the bound degrades linearly in the number of sub-windows.
Choose and defend it: at 50,000 tenants the exact rings cost under 100 MB in a process that already holds more, so ship exact. Keep the sketch for the case that actually motivates it, a per-principal or per-IP key where cardinality runs to millions and is not bounded by anything you control.
Raise the fleet problem before it is asked: each of 20 to 40 instances sees only its share, and the top 50 of one shard is not the top 50 of the fleet. Either aggregate counts centrally or accept that a per-instance threshold multiplied by instance count is the limit you are really enforcing.

Worked solution (25 min)

Size the exact structure: 300 one-second counters per tenant across 50,000 tenants, plus the running-total trick that makes a window read O(1).
Write the top-k extraction with a size-50 min-heap and compare its complexity against sorting all 50,000 sums.
Substitute N = 900,000 and m = 1,000 into N/(m+1) and state in requests what the sketch can and cannot distinguish.
Write the sub-window merge for the sliding case and state the resulting bound for 30 merged summaries.

Expected result: An exact per-tenant ring of 300 one-second counters at roughly 60 to 90 MB for 50,000 tenants with O(1) window reads, top-50 extraction by a size-k min-heap in O(d log k), a Misra-Gries bound of N/(m+1) with the numbers substituted, the sub-window merge needed to slide it, and a decision to ship exact at this cardinality with the sketch reserved for unbounded keys.

Verify it yourself

The exact window sum for one tenant equals a replay of its raw records over the same five minutes.
The heap result matches a full sort of the tenant sums on a sample.
The sketch's count for a known heavy tenant is at most the true count and no less than the true count minus N/(m+1).

Follow-up

The heaviest tenant is heavy because of one export job rather than user traffic. Should the limiter treat those as the same tenant?
Two tenants sit tied at the boundary of the top 50. Does your answer flap, and does the flapping matter?
You switch to per-principal keys and cardinality goes to 10 million. Walk through what changes.

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.
For the job case the invariant is expressible per row, so let the database hold it: a partial unique index on job_run (tenant_id, job_type) WHERE status IN ('queued','running') makes a second running export unwritable and the loser takes 23505, mapped to 409. That is strictly better than a counter — no drift, no reconciliation — and it is available only because the cap is one rather than fifty.
Add the retry discipline each route demands: under SERIALIZABLE both 40001 and deadlock 40P01 are retryable and the retry must re-execute the read, while under READ COMMITTED with the counter nothing retries, because the conflict is reported to the caller rather than raised as an error.

Worked solution (35 min)

Reproduce with two sessions that both count 49, both insert and both commit, at READ COMMITTED and then at REPEATABLE READ; record the final active count for each.
Repeat both sessions at SERIALIZABLE and record which SQLSTATE the loser receives and at which statement it is raised.
Implement the counter form and run a 20-way concurrent create against a tenant sitting at 45 active resources.
Implement the partial unique index for the job case and race 20 enqueues of the same export.

Expected result: READ COMMITTED and REPEATABLE READ both finish at 51. SERIALIZABLE finishes at 50 with one transaction aborted at 40001 — usually at commit, though SSI may raise it at an earlier statement. The counter form finishes at exactly 50: of the twenty creates, the five that take the tenant from 45 to 50 return 201 and the remaining fifteen match zero rows and return 409, with no error raised. The job index admits one running export and rejects the rest with 23505.

Verify it yourself

count(*) WHERE status='active' never exceeds the cap across 50 randomised concurrent runs.
Remove the active_resource_count < 50 predicate and the same test must start failing; if it still passes, the race is not being exercised.
At SERIALIZABLE, confirm every participating session is SERIALIZABLE — one session at a lower level and the guarantee is gone.
After each run, the counter equals the real count of active rows.

Follow-up

A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?
How do you detect after the fact that the counter drifted, without locking the table?

Write the update path that detects a concurrent edit

Medium · optimistic concurrency · transactional outbox · audit history

resource carries version INT NOT NULL DEFAULT 1. resource_revision holds revision_id, resource_id, version, actor_user_id, change_kind, patch JSONB, request_id, created_at with UNIQUE (resource_id, version). outbox_event holds aggregate_type, aggregate_id, aggregate_version, event_type, payload, status. A PUT carries the version the client read. Write the exact statements for the single transaction that applies the edit, records the revision and enqueues 'resource.updated', and give the handler's branch on zero affected rows. Then say what PostgreSQL 16 does under READ COMMITTED when two of these updates hit one row at once.

Approach

One transaction, three writes, no network call inside it: UPDATE resource SET title = $3, version = version + 1, updated_at = now() WHERE resource_id = $1 AND tenant_id = $4 AND version = $2; then INSERT the resource_revision row at version $2 + 1; then INSERT the outbox_event row at the same aggregate_version. The event goes to a table rather than a broker because no transaction spans both.
Branch on the affected-row count before doing anything else. Zero has three causes — stale version, wrong tenant, row gone — so re-read once and map to 409 carrying the current version, or 404 for an id outside the caller's tenant, which also stops the endpoint confirming that another tenant's id exists.
State the engine behaviour instead of assuming it. Under READ COMMITTED the second UPDATE blocks on the row lock, and when the first commits PostgreSQL re-evaluates the WHERE clause against the newly committed row, so the version predicate now fails and the statement reports zero rows. Under REPEATABLE READ the identical collision raises SQLSTATE 40001 instead, so the handler must fold both shapes into one conflict response.
Keep UNIQUE (resource_id, version) even though the predicate already serialises writers. It is what makes a lost update unwritable if any other path ever reaches the revision table, and it converts a logic bug into 23505 rather than into a silently missing history row.
Refuse to auto-retry the whole PUT. A retry re-reads the winner's state and reapplies an intent formed against data that no longer exists — the silent overwrite the version token was added to detect. Return the conflict; merge field-wise only if the patches are provably disjoint.
Note that now() is the transaction timestamp in PostgreSQL, so resource.updated_at, the revision's created_at and the outbox row share one instant, which is what later makes reconciliation between the three tables unambiguous.

Follow-up

A client sends the version it read ten minutes ago and the resource has moved three versions. What is in your 409 so it can resolve the conflict without a full re-fetch?
Two editors, two disjoint fields, no overlap. Does your answer still refuse the second write, and should it?
Every write now touches a second hot table. How do you keep the outbox insert and its partial index from becoming the write bottleneck at 1.2k writes/second?

What is your familiarity with Six Sigma or workflow re-design?

Medium

Approach

Clarify what is being asked and what a complete answer contains.
Work from the requirement backwards to the design.
Say what you would check first and why it is the highest-information step.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

How do you apply Agile processes to your development workflow?

Medium

Approach

State your assumptions explicitly before working the problem.
Work from the requirement backwards to the design.
Say what you would check first and why it is the highest-information step.

Follow-up

How would you know your answer was wrong?
What assumption would you test first?

Give the resource write endpoints a failure taxonomy clients can act on

Easy · error taxonomy · status codes · retries

Two callers use POST and PATCH /v1/resources: a server-side SDK that retries automatically, and a browser app that shows the user a message. Today every failure is a 500 carrying prose. Define the error contract for a malformed body, a field that fails validation, an expired token, a token whose auth_version no longer matches, a resource_id owned by another tenant, a version mismatch on update, an idempotency key reused with a different body, an exceeded tenant quota, and a read replica that has not caught up. Deliverable: the envelope, the status per case, and what each caller does.

Approach

Split the envelope by audience: a stable code enum for programs, a message documented as human-only and free to change wording, a request_id that joins to resource_revision.request_id and the trace, and a details array of field paths for validation failures. Publish the negative rules too - clients never branch on message, and an unrecognised code falls back to the status class.
Assign status by who has to change something. 400 for bytes that do not parse, 422 for a body that parses and violates a rule, 401 for a token that no longer authenticates - expiry and an auth_version mismatch are the same instruction, re-authenticate - 403 for a scope the principal lacks, 404 rather than 403 for another tenant's resource_id because 403 confirms the id exists, 412 for a failed If-Match (409 if the version travels in the body instead), 422 for a key reused with a different fingerprint, 429 for quota.
Derive retryability from whether the outcome is unknown, not from the status number. A timeout or a 5xx on a write is unknown - the transaction may have committed and the response lost - so the only safe retry is one carrying the same idempotency key. Every 4xx except 429 is deterministic, and retrying it only spends the caller's remaining deadline.
Refuse to model replica lag as an error. Read-after-write is held by pinning the session to the primary for a short window, not by a 404 the SDK retries into a loop; if staleness must be visible, expose it as a watermark on a 200, because a failure code invites a retry that cannot fix it.
Write both caller behaviours into the published contract: the SDK retries only 429, 503 and timeouts, with capped backoff and full jitter bounded by the deadline it was given; the browser stops and shows message, except on 412, where it must re-read the resource and rebase the edit rather than resubmit.

Worked solution (20 min)

Write the envelope as four named fields and state which are present on every error response without exception.
Fill a nine-row table: condition, status, code string, retryable yes/no, and the schedule or the reason a retry cannot help.
For each retryable row, name what makes the retry safe - HTTP method semantics, or an idempotency key.
Write the two caller policies as pseudocode: which codes the SDK retries, and what the browser does on 412 and on 429.

Expected result: An envelope with a code enum, a human message, a request_id and per-field details; nine conditions mapped to distinct statuses; retry advice attached to the outcome rather than to the status class; replica lag handled as consistency, not as an error.

Verify it yourself

Every row marked retryable names the mechanism that makes repeating it safe.
A resource_id from another tenant and a resource_id that does not exist are indistinguishable from outside.
Adding a new code does not change any existing code's meaning or any status already published.

Follow-up

A customer reports two resources created from one click. Which of your status codes could have produced that, and what in the contract permitted the client's reading?
You need a tenth error code next quarter without a version bump. What must v1 already have said for that to be non-breaking?

Listing latency scales with page size, not with filters

Easy · n+1 · latency · query batching

The tenant listing endpoint reads resource filtered by tenant_id and status, ordered by updated_at DESC, and returns each row plus the owner's display name from app_user and the actor of that resource's latest resource_revision. p99 is 55 ms at 10 rows per page and 1.4 s at 200. Database telemetry shows 401 statements per request, each under 1 ms, and nothing in the slow-query log. Diagnose the cause and give the fix, stating the statement count per request and the p99 you expect afterwards.

Approach

Read the counters before forming a theory. 401 statements for 200 rows is one driver query plus two per row, and sub-millisecond execution with an empty slow-query log rules out a bad plan. The time is round trips, which is why it is invisible in every per-query metric and scales with rows returned rather than with filter selectivity.
Name the two per-row statements from their normalised text: a single-row app_user lookup by user_id, and a resource_revision lookup by resource_id ordered by version DESC LIMIT 1. Confirm by dropping those two response fields and watching the statement count fall to one. That locates the calls in the serialisation layer, not the repository.
Check that the arithmetic accounts for the whole gap. Measure one round trip to the replica in isolation; 400 trips at roughly 3 ms of network plus 0.2 ms of execution is about 1.3 s on top of a 55 ms baseline, which matches. If the multiplication had fallen short, the N+1 would only be part of the story and you would keep looking.
Batch both lookups. Collect owner_user_ids and resource_ids from the driver query, then issue WHERE tenant_id = $1 AND user_id = ANY($2) for the users, and PostgreSQL's SELECT DISTINCT ON (resource_id) ... WHERE resource_id = ANY($2) ORDER BY resource_id, version DESC for the latest revision, which the UNIQUE (resource_id, version) index serves directly. On an engine without DISTINCT ON, use a lateral join or a row_number window. Three statements per request at any page size.
Keep the tenant predicate in the batched query. The per-row version was implicitly scoped because its ids came from tenant-scoped rows; a batched user_id = ANY(...) with no tenant_id is an unscoped read that behaves correctly only as long as the id list is trustworthy.
Re-measure at 10, 50 and 200 rows and confirm the statement count is constant. Latency should now track bytes returned.

Follow-up

The page size is capped at 200 today. What breaks first if it is raised to 2,000, and is it still this bug?
How do you stop the next N+1 from reaching production, given that no individual query is slow and the endpoint's tests pass?
The latest-revision actor is only used to render an avatar. Make the case for denormalising it onto resource, and name the write anomaly that introduces.

Suggested practice checklist

For someone who has spent the last few years shipping features and reading other people's code, and who has not solved a timed problem from a blank file in a long time. Five days rebuild the primitives and the patterns that sit on them, working from invariants rather than remembered solutions, and the last two attach that back to the rest of the loop.

Day 1 — Rebuild the primitives by implementing them

Implement a dynamic array with doubling growth and an operation counter, then change the growth rule to add a fixed sixteen slots instead, and time both for n of ten thousand, a hundred thousand and a million. The fixed-increment version resizes n/16 times at O(n) each, so its total work is quadratic; doubling is what makes append amortised constant.
Implement a hash map with separate chaining and a load-factor resize, then insert ten thousand keys engineered to land in one bucket and record what happens to lookup time, so that average-case O(1) becomes a claim with a stated precondition rather than a reflex.
For dynamic-array append and hash-map insert, write down which cost is amortised rather than worst-case, which single operation pays the whole bill, and what a system with a hard per-operation deadline would have to do instead.

Deliverable: Two working implementations plus a timing table showing the input at which each structure's advertised complexity stops holding.

Day 2 — Arrays under an invariant: two pointers, sliding window, binary search

Solve longest-subarray-with-sum-at-most-K using a sliding window, then run it on an input containing negative numbers and watch it return the wrong answer: extending the window only moves the sum monotonically when every element is non-negative, and that precondition is the whole reason the technique works.
Write the binary search that finds the first index satisfying a predicate rather than an exact value, put the loop invariant above the loop in a comment, and verify termination on the two inputs that break careless versions: the empty range, and a range where every element satisfies the predicate.
Compute the midpoint as lo + (hi - lo) / 2 and write one line on why the obvious (lo + hi) / 2 is a genuine defect in a fixed-width integer type and a non-issue in a language with arbitrary-precision integers.

Deliverable: Three solved problems, each with its invariant written above the loop, plus one recorded input on which the sliding window is provably wrong.

Day 3 — Sorting, heaps, and the greedy argument that has to be proved

Solve one top-k problem three ways, by full sort, by a size-k heap, and by quickselect, then write the values of n and k at which each becomes the right choice, along with quickselect's quadratic worst case and why a randomised pivot makes that unlikely rather than impossible.
Implement bottom-up heapify and count sift-down steps to confirm it does linear work rather than n log n, because most nodes sit near the bottom of the tree and therefore move only a short distance.
Take interval scheduling by earliest finishing time and write the exchange argument out in full: given any optimal schedule, swapping in the earliest-finishing interval keeps it feasible and no smaller. Then construct the weighted variant where that same greedy fails and name what has to replace it.

Deliverable: A three-way top-k comparison with measured crossover points, one written exchange argument, and one counterexample to a greedy rule that looks almost identical.

Day 4 — Recursion, memoisation, and the step to a table

Take one problem with overlapping subproblems, such as edit distance or coin change, instrument the plain recursion with a call counter to show the blow-up, then add memoisation and re-count.
Convert the memoised version to a bottom-up table and state the two properties you relied on: each subproblem's result depends only on its arguments, and the dependencies form a DAG you can enumerate in order.
Rewrite one deep recursion with an explicit stack, then find the input length at which the original hits the interpreter's frame limit, which defaults to about a thousand frames in CPython, so you know when the rewrite is required rather than decorative.

Deliverable: One problem in three forms, naive, memoised and tabulated, with call counts for each and the input length at which recursion depth becomes the binding constraint.

Day 5 — Graphs, where most of the work is choosing the traversal

Implement BFS and DFS over one adjacency list, then answer for each which finds a shortest path in an unweighted graph and which you would use to detect a cycle in a directed graph, including why the in-progress versus finished distinction matters for the second.
Implement topological sort by in-degree, feed it a graph containing a cycle, and confirm the failure signature is that fewer than V nodes come out rather than an exception, then note that the order it produces is one of several valid ones.
Run a shortest-path search on a graph with a single negative edge weight and show the wrong answer, then write the precondition Dijkstra actually needs, non-negative weights, because it finalises a node's distance the first time that node is popped, and name the algorithm you would switch to and its own limit.

Deliverable: A small graph library with BFS, DFS and topological sort, plus two inputs that produce documented wrong answers under the wrong algorithm choice.

Day 6 — One day for everything that is not an algorithm

Sketch one system only to the depth a coding-heavy loop tends to reach: the endpoints, what the service stores, and the single query pattern that decides the schema. Stop at twenty-five minutes.
Prepare the project answer for an interviewer who codes, which means rehearsing the two levels they push to: the specific thing you built, and why you chose that approach over the alternative they will name. Open with a number and be ready to say what it excludes.
Prepare the answer to what you would do differently, choosing a real technical mistake with a specific fix rather than a complaint about process or staffing.

Deliverable: One design sketch at endpoint-and-schema depth, plus a project answer rehearsed to two levels of follow-up.

Day 7 — Solve out loud, under time

Do three timed problems at twenty-five minutes each in a plain editor with no autocomplete and no execution until the end, then tally separately the failures that were syntax and the ones that were approach, because those two numbers call for different fixes.
Narrate one solution from the first sentence, stating the approach and its complexity before writing any code, and rehearse the sentence you will use when you realise mid-solution that the approach is wrong.
Re-solve from blank the two problems you were slowest on this week and compare the times against the day they first appeared.

Deliverable: A recording of one fully narrated solution and a tally that separates syntax failures from approach failures.

Disagreement needs an outcome you did not choose

Conflict answers where you were right and everyone came round are the weakest ones. Stronger: the evidence you went and collected, what would have changed your mind, and what you did in the weeks after the call went against you. Implementing a design you argued against, properly, is a specific and checkable behaviour.

What is your passion or drive for taking on this specific challenge?

Medium · behavioural and engineering judgement

Approach

Name the disagreement and how you resolved it with evidence.
State the situation in two sentences and spend the rest on the reasoning.
Close with what you would do differently, concretely.

Follow-up

What would you do differently if you ran that again?
How did you know your change caused the improvement?

Describe a time you overcame a difficult challenge at a previous employer.

Medium · behavioural and engineering judgement

Approach

Pick a story where you made the decision, not one where you watched it.
Name the disagreement and how you resolved it with evidence.
Close with what you would do differently, concretely.

Follow-up

What did you decide not to do, and why?
What would you do differently if you ran that again?

What is your experience with Linux, GNU toolchains, and version control systems?

Medium · behavioural and engineering judgement

Approach

Pick a story where you made the decision, not one where you watched it.
Close with what you would do differently, concretely.
State the situation in two sentences and spend the rest on the reasoning.

Follow-up

How did you know your change caused the improvement?
What did you decide not to do, and why?

How do you react to moments of failure or technical setbacks?

Medium · behavioural and engineering judgement

Approach

Name the disagreement and how you resolved it with evidence.
Give the blast radius: what could have broken, and what you measured.
Pick a story where you made the decision, not one where you watched it.

Follow-up

How did you know your change caused the improvement?
What would you do differently if you ran that again?