Interview guides · Acre

Acre Software Engineer Interview Questions & Guide 2026

Debugging practice for Acre software engineer candidates: reproduce it, narrow it, then change one thing per run.

The 60-second brief

A Software Engineer at Acre plays a pivotal role in shaping the technical infrastructure that drives the company’s platform. This position is not merely about writing code; it is about building scalable, efficient solutions that support the core business objectives of the organization. As a member of the engineering team, you will be responsible for designing and implementing features that directly impact the user experience and the overall reliability of the system.

Most rounds test how you handle an under-specified problem more than what you recall. A wrong first approach you correct out loud is recoverable; a constraint you assumed silently and were never given is the expensive mistake.

Focus areas

Make every write idempotent under retry
Choose indexes from the query's access path
Trace a symptom to a mechanism under load

Overview

The role requires a high degree of ownership and the ability to work within a fast-paced environment. You will collaborate closely with cross-functional partners to translate complex requirements into clean, maintainable, and high-quality software. Because Acre values technical excellence, you will be expected to demonstrate a deep understanding of core programming principles and the ability to apply them to real-world engineering challenges.

The Acre interview process

Acre candidates report 3 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Introductory Call

Because the format is not fixed, the first job in the room is classification. Listen to the opening question and decide what it is: a probe into work you have already described, a fresh problem to solve now, or a conversation about how you operate. Each wants a different register, and the common failure is forcing a rehearsed structure onto a question that did not ask for it. Running a full design ritual on a ten-minute debugging question reads as not listening. When you cannot tell which it is, ask how long they want to spend and answer at that depth.

What to demonstrate

Whether the shape of your answer matches the question, so a yes-or-no gets answered before it is justified and an open prompt gets a direction before a detour
Whether you check how much depth is wanted instead of deciding for them, and whether you stop when the answer is complete rather than continuing until someone interrupts
Whether you can be redirected in the middle of an answer without restarting it from the beginning
Whether a question outside your experience gets an honest boundary followed by reasoning from what you do know, instead of a confident answer with nothing behind it

How to prepare

Rehearse one project at three lengths, roughly thirty seconds, three minutes, and a full walkthrough at the depth of a design review, and practise switching between them when someone interrupts mid-telling
Have someone ask you five questions of deliberately mixed type in one sitting without telling you the types, and score only whether you identified each one correctly before you started answering
Draft the sentence you will use to check depth, along the lines of asking whether the short version is useful here or they want the detail, and use it in a real conversation this week so the day of the round is not its first outing

Take-Home Coding Assessment

The README is read before the code, and a follow-up conversation is usually built from it, so treat every sentence you put there as a question you have agreed to answer. It needs the command that runs the thing, the assumptions you made where the prompt was ambiguous, and the limits of what you built stated with the preconditions that make them true. Overclaiming is the expensive mistake here. Writing that something is thread-safe, or constant-time, or handles files larger than memory invites a reader to check that exact line, and a claim the code cannot support costs more than silence would have.

What to demonstrate

Whether the run instructions work from a clean clone, naming the exact commands, the language version you tested on, and any environment variable the program expects
Whether ambiguities in the prompt are resolved in writing, with the interpretation you picked and the reason, rather than settled silently in the code
Whether documented limits match the implementation, so a stated input bound is one the code enforces or at least does not contradict
Whether the trade-offs you list come with the condition that would make you choose the other way, instead of reading as a list of alternatives you happened to consider

How to prepare

Write the README before the final hour, then read the code against it claim by claim and correct or delete every statement the implementation does not back
For each ambiguity in the prompt, write one sentence fixing your interpretation and keep it; those sentences become the assumptions section and your answer when someone asks why you did it that way
Give the repository to someone who has not seen the prompt and ask them to run it using only what is written down, treating every question they have to ask you as a gap in the document

Final Interview Round

A day like this is several different games in a row, and the expensive mistake is carrying the previous one into the next room. Coding rewards narrow precision and finishing inside a timer. Design rewards breadth, stated assumptions and naming what you are deliberately not building. Behavioural rewards specificity about people and decisions. Candidates who over-engineer a coding problem they were supposed to finish, or who start sketching class hierarchies before anyone has agreed what the system has to do, are usually still playing the last round. Between rooms, name out loud which game the next one is.

What to demonstrate

Whether the coding round ends with something that runs and has been traced against a degenerate input, rather than an extensible design that was never finished
Whether a design discussion opens by agreeing on traffic shape, read-to-write ratio and what is allowed to be stale, instead of proceeding from an architecture you arrived with
Whether a behavioural answer names a person, a disagreement and what you did about it, rather than describing the system the story happened inside
Whether the opening habits still appear late in the day: restating the problem, asking for constraints, saying the plan before typing

How to prepare

Book three mocks of different types back to back on one afternoon and ask each interviewer afterwards which round you answered in the wrong mode
Write a three-line opening script per round type — coding: restate, name the approach and its cost, then type; design: ask for scale, read-write mix and what must not break; behavioural: name the person, the stakes and the decision — and run it off a card so the switch is mechanical rather than remembered
Practise coding with a timer you do not extend, stopping when it stops, so the trained reflex is to finish a correct solution rather than to keep improving one

Where candidates lose points

Letting a slow dependency consume unbounded concurrency

The failure that takes a service down is usually not an error but a delay. A dependency answering in thirty seconds instead of fifty milliseconds holds each request's worker or connection six hundred times longer, and since required concurrency is arrival rate times latency, a fleet sized for sixty in-flight requests now needs thirty-six thousand to sustain the same rate - so it queues, and requests whose clients have already abandoned them still occupy resources. Retries make it precisely worse: a policy of three attempts triples the load on a dependency at the exact moment it is least able to serve, which is how one slow dependency becomes an outage of everything sharing that pool. Containment is four specific things - a timeout on every outbound call shorter than the caller's remaining budget, a bounded pool per dependency so one cannot starve the others, backoff with full jitter rather than a fixed delay so retries do not resynchronise, and a circuit that stops sending once the failure rate makes an attempt pointless.

Running a schema change as though the lock lasts as long as the statement

In PostgreSQL an ALTER TABLE that needs an ACCESS EXCLUSIVE lock must first wait for every open transaction touching that table, and while it waits, later queries needing a conflicting lock queue behind it rather than overtaking it. A DDL statement that would execute in milliseconds, issued while a thirty-second analytics query is open, therefore stalls all traffic on that table for thirty seconds: the outage length is set by the longest open transaction, not by the change. The defences are specific and worth knowing by name - set lock_timeout low and retry rather than queue, add columns without a volatile default so no table rewrite occurs (from version 11 a non-volatile default is a metadata-only change), build indexes with CREATE INDEX CONCURRENTLY while accepting that it cannot run inside a transaction block and leaves an invalid index behind if it fails, and add constraints as NOT VALID followed by a separate VALIDATE CONSTRAINT, which takes a weaker lock.

Check-then-act on shared state

Read, decide, write is not safe under concurrency unless the decision and the write are one atomic step: a unique constraint with conflict handling, a compare-and-set, or a row lock held for the whole transaction. Two requests can both pass the existence check before either inserts, which shows up as duplicate rows under load and never in a single-threaded test.

Quoting amortised or average cost as if it were a worst-case guarantee

Appending to a dynamic array is amortised O(1), but the append that triggers a resize copies every element, and hash lookup is constant only while the hash spreads the actual keys. Say which guarantee you are offering when the caller cares about the latency of one call rather than the total over many.

Questions & practice

Merge partitioned event streams into one ordered feed with bounded lateness

Hard · k-way merge · watermarks · out-of-order streams

The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.

Approach

Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.
Choose the late-event policy from what the projection is keyed on. The projection upserts on (aggregate_id, aggregate_version) and discards a version it has already applied, so a late event is safe to apply out of order and correctness never depended on the merge at all. Apply it, recompute the affected feed page, and count lateness so the 30-second budget can be re-derived from data rather than folklore.
Say what the merge does not buy: ordering is guaranteed within one aggregate by the log's partitioning, and no watermark makes the cross-aggregate order authoritative. Two events from different aggregates in the same millisecond have no true order, so the feed's order is a presentation choice that must be stable rather than correct.

Follow-up

The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?
One partition is ten minutes behind because its producer is slow. Do you stall the feed or emit without it?

Identify the heaviest tenants in a five-minute window under memory pressure

Medium · top-k · heavy hitters · streaming

The edge service handles about 3,000 requests per second across roughly 50,000 tenants, peaking near 9,000. Expose the 50 heaviest tenants by request count over the trailing five minutes so limits can be tightened before one tenant's backfill starves the fleet. You may not retain five minutes of raw records. Give the exact solution and its memory, then the bounded-memory approximation with its error stated as a formula, and say which you would ship and at what tenant cardinality that choice changes.

Approach

Do the exact version first, because it is affordable at this cardinality: a ring of 300 one-second counters per tenant, advanced lazily, is 1,200 bytes of counters per tenant and roughly 60 to 90 MB for 50,000 tenants with overhead. Carry a running total and subtract the bucket you overwrite so a window read is O(1) rather than 300 adds.
Extract the top 50 with a size-k min-heap over the tenant sums: O(d log k) for d tenants, against O(d log d) to sort them all. Maintaining the heap continuously instead of on query requires a tenant-to-heap-index map, because incrementing a count already inside the heap means sifting from a known position, and without that map you rebuild the heap on every request.
State the approximation precisely rather than gesturing at sketches. Misra-Gries with m counters retains every item whose true count exceeds N/(m+1), and each retained count underestimates the truth by at most N/(m+1). With m = 1,000 and N = 900,000 requests in the window the error is roughly 900 requests, which is fine for spotting a tenant sending 50,000 and useless for ranking two tenants 200 apart.
Say what breaks when the window slides: Misra-Gries and Space-Saving are insert-only and cannot be decremented as records age out. The workable construction is one summary per sub-window, say ten seconds, with 30 summaries merged at query time, and the merged error is the sum of the per-summary errors, so the bound degrades linearly in the number of sub-windows.
Choose and defend it: at 50,000 tenants the exact rings cost under 100 MB in a process that already holds more, so ship exact. Keep the sketch for the case that actually motivates it, a per-principal or per-IP key where cardinality runs to millions and is not bounded by anything you control.
Raise the fleet problem before it is asked: each of 20 to 40 instances sees only its share, and the top 50 of one shard is not the top 50 of the fleet. Either aggregate counts centrally or accept that a per-instance threshold multiplied by instance count is the limit you are really enforcing.

Follow-up

The heaviest tenant is heavy because of one export job rather than user traffic. Should the limiter treat those as the same tenant?
Two tenants sit tied at the boundary of the top 50. Does your answer flap, and does the flapping matter?
You switch to per-principal keys and cardinality goes to 10 million. Walk through what changes.

Collapse a redelivered event batch into per-aggregate high-water marks

Easy · hashing · at-least-once · aggregation

You drain a batch of up to 5,000,000 events, each (aggregate_id BIGINT, aggregate_version INT, event_type, payload). The log guarantees order within one aggregate only; the batch merges 64 partitions, and a relay failover has redelivered a range, so an older version for an aggregate can appear after a newer one. Given a map of last_applied_version per aggregate, produce the events worth applying, at most one per (aggregate_id, version), plus the count discarded. Target O(n) time. State the memory for 2,000,000 distinct aggregates and what you do when it does not fit.

Approach

One pass, one hash map from aggregate_id to the highest version kept, and a discard counter. An event whose version is at or below last_applied_version for its aggregate is dropped without further work, which is the whole reason the event carries its version rather than a delta. O(n) expected time, O(d) space in distinct aggregates.
Keep the maximum, never the last occurrence. The redelivered range means the final appearance of an aggregate in the batch can be an older version than one seen earlier in the same batch, so last-wins applies stale state over newer state and the projection regresses with no error anywhere.
Cost the memory instead of calling it large: an 8-byte key plus a 4-byte version is 12 bytes of payload, and an open-addressed table held at a 0.7 load factor costs roughly 17 bytes per entry before per-slot metadata, so 2,000,000 aggregates is tens of megabytes in a native layout and several times that in a runtime that boxes both key and value.
If the distinct set exceeds memory, partition on hash(aggregate_id) mod P and reduce each partition independently. Every event for one aggregate hashes to the same partition, so the per-partition result is exact and the merge is concatenation rather than a second reduction.
Reject sorting the batch by (aggregate_id, version) as the default. It is O(n log n) and buys nothing, because max is associative and commutative and needs no ordering; sorting earns its cost only when the downstream consumer must receive the events in order rather than a per-aggregate winner.
Separate the two mechanisms out loud: in-batch deduplication does not make the consumer idempotent, because the same event redelivered tomorrow arrives in a different batch entirely. The projection write itself still has to be keyed on (aggregate_id, version).

Worked solution (20 min)

Write the pass: look up last_applied_version, skip if the event's version is not greater, otherwise upsert into the keep-map only when the incoming version exceeds the version already held, incrementing the discard counter on every skip.
Hand-trace one aggregate whose events arrive as v5, v3, v4, v5 with last_applied_version = 2, and confirm the output holds v5 once while the counter reads 3.
Compute the table footprint for 2,000,000 entries at 12 bytes of payload and a 0.7 load factor, then state the multiplier for a runtime that boxes keys and values.
Add the hash-partitioning fallback and say in one sentence why the per-partition results need no cross-partition merge logic.

Expected result: A single-pass O(n) reduction keyed on aggregate_id that keeps the maximum version rather than the last occurrence, O(d) space with the byte cost stated for 2,000,000 aggregates, a hash-partitioning fallback keyed on aggregate_id, and an explicit statement that batch-local deduplication does not replace a projection write keyed on (aggregate_id, version).

Verify it yourself

Shuffling the batch order changes nothing in the output, which is the test that separates max-wins from last-wins.
Feeding the same batch twice produces an identical keep-set and only doubles the discard counter.
Every emitted event has a version strictly greater than the supplied last_applied_version for its aggregate.

Follow-up

The payload is a patch rather than a snapshot, so applying only the highest version loses the intermediate changes. What changes in your reduction?
How do you detect that version 7 arrived while version 6 was never delivered, and what should the consumer do about the gap?
Two events for one aggregate carry the same version with different payloads. Which one is wrong, and how would you find out?

Explain why the owner filter ignores the listing index

Medium · composite index · query plans · sort elimination

The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.

Approach

Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.
Answer the two negatives explicitly. owner_user_id alone is not a left prefix of the new index, so it degrades to a full scan of the index at best. Ordered by updated_at, the query still seeks on the (tenant, owner) pair but must sort, because only created_at is ordered within that pair.
Measure both sides with EXPLAIN (ANALYZE, BUFFERS) and compare estimated against actual rows at the lowest node — a 2M-versus-200 misestimate there is usually what chose the plan, and adding an index will not fix a statistics problem.

Worked solution (25 min)

Load 2M resource rows across 5k owners in one tenant, run the query under EXPLAIN (ANALYZE, BUFFERS), and record the node reading the most rows plus the Sort Method line.
Create (tenant_id, owner_user_id, created_at DESC) concurrently and re-run, confirming the Sort node is gone and actual rows fall to about 20.
Run the two negative cases and capture the plan for each.
Re-run the original tenant listing query to confirm the new index has not displaced the index that query depends on.

Expected result: With (tenant_id, owner_user_id, created_at DESC) the plan is an Index Scan with no Sort, roughly 20 rows and a handful of buffers, sub-millisecond. owner_user_id alone still scans; ORDER BY updated_at seeks on the pair and then sorts that owner's rows.

Verify it yourself

Actual rows at the leaf node is on the order of the LIMIT, not the tenant's row count.
No Sort node appears above the index scan.
Buffers read stays constant as one owner's row count grows; if it grows with it, the ORDER BY is not being satisfied by the index.
pg_stat_user_indexes shows idx_scan climbing on the new index and not on the listing index for this endpoint.

Follow-up

90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
A dashboard runs this for 40 owners in one page load. What changes about the design?
How do you roll this index out on a table taking 1.2k writes/second, and what does it cost on every insert from then on?

Hold a per-tenant active cap against concurrent creates

Hard · write skew · isolation levels · constraints

A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.

Approach

Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.
For the job case the invariant is expressible per row, so let the database hold it: a partial unique index on job_run (tenant_id, job_type) WHERE status IN ('queued','running') makes a second running export unwritable and the loser takes 23505, mapped to 409. That is strictly better than a counter — no drift, no reconciliation — and it is available only because the cap is one rather than fifty.
Add the retry discipline each route demands: under SERIALIZABLE both 40001 and deadlock 40P01 are retryable and the retry must re-execute the read, while under READ COMMITTED with the counter nothing retries, because the conflict is reported to the caller rather than raised as an error.

Follow-up

A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?
How do you detect after the fact that the counter drifted, without locking the table?

What specific projects have challenged you most in your career?

Medium

Approach

State your assumptions explicitly before working the problem.
Clarify what is being asked and what a complete answer contains.
Say what you would check first and why it is the highest-information step.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Filter a list to remove duplicated items.

Medium

Approach

Clarify what is being asked and what a complete answer contains.
Say what you would check first and why it is the highest-information step.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Why are you interested in contributing to the engineering goals at Acre?

Medium

Approach

Say what you would check first and why it is the highest-information step.
State your assumptions explicitly before working the problem.
Work from the requirement backwards to the design.

Follow-up

What assumption would you test first?
How would you know your answer was wrong?

Choose what to break when replication lag reaches forty seconds

Hard · replication lag · read-after-write · consistency vs availability · load shedding

Reads are served from two replicas: 14k requests/second, about 85% absorbed by cache, so roughly 2.1k reads/second reach the database. Writes go to the primary at 1.2k/second. A tenant's backfill drives replication lag from under 100 ms to 40 seconds and it is still climbing. Sessions that have just written are pinned to the primary. Decide, endpoint class by endpoint class, whether to serve stale, fail, or route to the primary, and justify each choice with the load it adds to the primary. Then state what you would have built beforehand.

Approach

Establish blast radius before cause, because mitigation and diagnosis have different deadlines. The decisive arithmetic is what happens if the database reads move to the primary: 2.1k reads/second on top of 1.2k writes/second roughly triples its operation count, on the node already absorbing the backfill that caused this. Reads and writes are not equal in cost, so treat that as an argument against a blanket move rather than as a capacity model - but it is enough to rule out routing everything to the primary.
Classify endpoints by what staleness costs, not by how important they feel. Reads whose staleness is invisible - listings, search, counters - stay on the replica and return the watermark so the client can tell. Reads that immediately follow that same session's write keep their primary pin, which is a small bounded slice of traffic rather than the whole 2.1k/second. Reads that feed a decision with a side effect - authorisation, quota, the read half of a read-modify-write - must not be stale at all, because a 40-second-old permission row is the stale-permission failure wearing a different costume; those go to the primary or fail.
Shed instead of queueing. If the must-be-fresh class alone exceeds the primary's headroom, refuse its lowest-value slice with 503 and a retry-after. A request queued behind a saturated primary holds a connection for a client that has already given up, and the retry storm that follows is what turns degradation into an outage. Bound the connection pool per role so the read fallback cannot consume the write path's connections - that bulkhead is the single decision that determines whether writes survive the next ten minutes.
Attack the cause in parallel, since it is the one thing that can be stopped. The backfill is the load generator. A backfill that reads replication lag as its throttle signal and pauses above a threshold would have made this a non-event, with batch sizes small enough that each batch's write volume is a fraction of what a replica can apply per second. That is most of the answer to what should have existed beforehand.
Name the mechanism you would prefer over session pinning. Capture the write position at commit and require the read path to be at or past it: compare the primary's pg_current_wal_lsn() at commit time against the replica's pg_last_wal_replay_lsn(), and fall back to the primary only for the specific request that is ahead of the replica. Session pinning is the cheap approximation and it over-pins - every read in the window goes to the primary whether or not it needed to, which is a share of the cost being paid right now.

Worked solution (35 min)

List the endpoints in three buckets - staleness invisible, staleness visible to the writer only, staleness unsafe - and attach the share of the 2.1k reads/second each bucket carries.
Compute the primary's operation count under each routing option and mark which options are arithmetically available.
Write the pin rule and its window, then the shed rule: which slice, what status code, what retry-after.
Write the backfill's throttle predicate against a measured lag value, including its pause threshold and resume condition.

Expected result: Staleness-invisible reads stay on the replica and return a watermark. Reads following the session's own write keep a bounded primary pin. Reads that gate a side effect go to the primary or fail, with the lowest-value slice shed as 503 plus retry-after if headroom runs out. Connection pools are bounded per role so the read fallback cannot starve writes. The backfill is throttled on measured replication lag. The durable fix is a commit-position token compared against the replica's replay position, replacing blanket session pinning.

Verify it yourself

The traffic routed to the primary under the plan is stated as a rate, not as a category.
No element of the plan increases the write path's connection usage.
The backfill throttle references a measured lag value and has an explicit resume condition.
Every endpoint left on a replica returns something with which a client can detect staleness.

Follow-up

Lag returns to normal in nine minutes. Which mitigation do you remove first, and which one stays permanently?
A user reports their change did not save, and the write committed. Trace the path that produces that report and name the signal that would have shown it before the report arrived.
The replica is 40 seconds behind but otherwise healthy. Do you take it out of rotation? What does that do to the other replica's lag?

Every query on one table stalls for forty seconds mid-deploy

Medium · lock contention · ddl · migrations · postgres

During a release on PostgreSQL, every query touching resource times out for about 40 seconds and then recovers with no intervention. The release ran one migration, ALTER TABLE resource ADD COLUMN archived_reason TEXT, and the migration log shows it completing in 6 ms. Unrelated tables showed no change in error rate. Explain how a 6 ms statement caused a 40-second stall, give the ordered checks you would run on a live system to confirm it, and give the migration procedure that prevents a repeat.

Approach

Separate the statement's duration from the lock's duration. ADD COLUMN with no default is a catalogue-only change and genuinely runs in milliseconds, but it requires ACCESS EXCLUSIVE, and it cannot acquire that until every transaction already touching the table has finished.
Account for the queueing, which is the part that surprises people. A lock request that is waiting blocks later requests for conflicting modes behind it rather than letting them overtake, so one long-open transaction holds the DDL and the DDL holds all the traffic. The stall length is set by the longest open transaction, not by the size of the change.
Confirm on a live system in this order: pg_stat_activity for that table ordered by xact_start, looking for the oldest transaction and specifically for state = idle in transaction; then pg_locks where granted = false to find the waiter; then join them on pid to name blocker and blocked. pg_blocking_pids() does that join for you and is the fastest single call.
Prevent rather than merely time it better. Set lock_timeout to a second or two on the migration session so the DDL abandons the queue after a bounded wait and is retried, instead of holding it for as long as the oldest transaction lives. Be exact about what that buys: queries arriving during the wait still queue behind the pending ACCESS EXCLUSIVE request, so each attempt costs them up to one lock_timeout of added latency. The outage goes from 40 seconds to about one second per attempt, not to zero. Also run migrations away from deploy-time peaks, and put a statement timeout and an idle-in-transaction timeout on the analytics role that opens the long transactions.
Know the lock each change takes, since the mitigation differs by change. A column with a non-volatile default is a metadata-only change from PostgreSQL 11 and still needs the brief ACCESS EXCLUSIVE; an index needs CREATE INDEX CONCURRENTLY, which cannot run inside a transaction block and leaves an INVALID index to drop if it fails; a check or foreign key is added NOT VALID and then VALIDATE CONSTRAINT as a separate statement under a weaker lock.

Follow-up

The same release also wants NOT NULL on that column. What is the sequence that gets there without a long lock?
Your lock_timeout retry fails ten times in a row because the analytics transaction is always open. What do you change?
How does this differ on MySQL with InnoDB online DDL, and what is the equivalent of the waiting-lock queue there?

Suggested practice checklist

Four days sample coding, design, fundamentals and the practical rounds at deliberately shallow depth, which is enough to surface the topics you did not know were in scope. That map, rather than a guess made on day one, decides where the last three days go.

Day 1 — Coding, one pass at shallow depth

Solve one problem from each of six families, an array with two pointers, hash counting, binary search, a tree traversal, a graph traversal and one dynamic program, under a hard twenty-minute cap with no extensions, marking each finished, late, or stalled.
For every stall, write the exact move you could not make rather than the subject, so the note reads could not turn the recurrence into a loop rather than bad at dynamic programming.
Fix nothing today. The value of the pass is the unfixed record.

Deliverable: Six timed attempts marked finished, late or stalled, each stall carrying a named blocking move.

Day 2 — Design, one pass at shallow depth

Spend twenty minutes each on three different shapes, a read-heavy feed, a write-heavy ingest path, and something needing a transaction across two entities, stopping each at requirements, interface and data model.
After each, write the first question you could not answer, which is usually a number you could not estimate or a failure mode you had no vocabulary for.
Mark which of the three you would be most relieved not to be asked, and treat that as data rather than as a preference.

Deliverable: Three shallow designs, each with the first unanswerable question written at the bottom.

Day 3 — Fundamentals and the practical rounds

Answer eight short questions in writing at four minutes each, covering the material that fills the gaps between the big rounds: what happens between a URL and a rendered page, what an index costs on write, when a process is preferable to a thread, and what conditions a deadlock requires.
Do one thirty-minute practical task of the kind a take-home compresses: read an unfamiliar two-hundred-line file and write what it does, what you would change, and the one thing you remain unsure of.
Score every answer fluent, correct but slow, or absent, and keep the absent ones visible.

Deliverable: Eight scored short answers and one written reading of unfamiliar code.

Day 4 — The rounds that are about you, and the map

Deliver three behavioural answers aloud against a timer, a conflict, a failure you owned, and a decision made without enough information, marking any that ran past three minutes or contained no number.
Assemble the map: every marked item from days one to three on a single page, sorted by how likely it is to appear in your loop rather than by how uncomfortable it felt.
Choose exactly two areas for the remaining three days and write down what you are deliberately abandoning.

Deliverable: A one-page scored map of the whole surface area with two areas chosen and the rest explicitly abandoned.

Day 5 — First chosen area, to the depth you skipped

Work the higher-ranked area in four focused blocks, choosing items one level above where you stalled rather than repeating what already works.
After each block write the rule you extracted in one sentence with its precondition attached, since a rule carrying no precondition is exactly what fails under a variation.
Re-attempt the day-one or day-two item that exposed this area and compare against the original timing.

Deliverable: Four worked blocks, a timed re-attempt against the original, and three one-sentence rules with preconditions.

Day 6 — Second chosen area, where the gap is coverage rather than speed

Treat the second area differently from the first. Day five drilled something you could already half-do; this one is usually a topic you had simply never met, so build one worked reference example end to end and keep it, rather than attempting six problems badly.
Write down the vocabulary you were missing on day two or three, five terms at most, each with the one sentence that makes it usable in an answer rather than the textbook definition.
Redo the shallow attempt that exposed this area and note whether you now fail later in the problem, because moving the failure point is the realistic gain from a single day and is worth more than a score that did not change.

Deliverable: One worked reference example for the newly covered area, a five-term vocabulary list, and a note on where the failure point moved.

Day 7 — Reassemble the loop

Sit two rounds back to back with no gap, ordering them so the area you chose second comes last, because the map was built from rested, isolated attempts and the loop will reach your weaker area when you are already spent.
Write where the second round suffered from the first, which is normally the point at which structure collapses into narration.
Reduce the week to one page holding only the rules you can state without reading them.

Deliverable: Mock notes on cross-round carryover plus a one-page card of rules you can recite from memory.

The bug you decided not to fix

Engineers over-index on what they repaired. A stronger answer covers something you knowingly left broken: the alert you tuned down, the data inconsistency you documented instead of chasing, the cleanup you deferred past two quarters. Give the reasoning and the condition that would have reopened it, so it reads as a decision and not as neglect.

Tell me about your time at university.

Medium · behavioural and engineering judgement

Approach

Close with what you would do differently, concretely.
Name the disagreement and how you resolved it with evidence.
Give the blast radius: what could have broken, and what you measured.

Follow-up

How did you know your change caused the improvement?
What did you decide not to do, and why?

Ship under a deadline and bound the debt you chose

Medium · pagination · technical debt · tradeoffs

You have four days to ship a tenant-facing listing endpoint. The version you would defend uses keyset pagination over (tenant_id, status, updated_at DESC, resource_id DESC); the version you can finish uses LIMIT/OFFSET with no matching index. Describe a deadline call you actually made of this shape: what you shipped, what you knowingly deferred, how you bounded the damage with a mechanism rather than an intention, and the specific numeric condition that would force the follow-up. Name who you told and where you wrote it down.

Approach

Name the deferred failure precisely instead of calling it slow. OFFSET n makes the database produce and discard n rows, so cost grows with page depth; without an index matching the sort, every matching row is read and sorted before the limit applies; and rows inserted between two page fetches shift across the boundary so items are skipped or repeated with nothing in the response to signal it.
Bound the blast radius with something mechanical rather than a promise: cap maximum page depth, cap page size, restrict the endpoint to one internal caller, or keep it behind a flag. State which failure each cap removes and which it leaves standing.
Attach a number to the trigger and wire it to an alarm: the first tenant crossing N resources, or the endpoint's p99 crossing its share of the 400 ms budget, so the debt announces itself instead of waiting to be remembered.
Write it where the next engineer looks, which is the code and the ticket, not a chat message: what was deferred, why, the cap, and the trigger.
Report what actually happened in your real example, including the case where the trigger never fired and the debt was correctly never repaid.

Follow-up

At what page depth does the offset version breach your latency budget, given your page size and row counts?
What breaks first when you switch to keyset pagination later, and what does a client holding an old page token see?
Who would have overruled you if you had asked for two more days, and did you ask?

Reverse your own decision and price the reversal

Medium · reversibility · measurement · migrations

Describe a technical decision you made and later reversed. Pick one that cost something: a service you split and merged back, a cache you added and removed, an index you created that pushed the planner onto a worse plan, a projection you rebuilt from scratch. State what you believed when you decided, the measurement that changed your mind, how long the wrong version ran in production, and what the reversal cost in migrations, dual writes, and a deprecation window for callers you did not own.

Approach

State the original rationale without irony, in the version you would still defend given what was known then. If it is not defensible, the story is about carelessness rather than judgement, and a different example serves you better.
Give the measurement that moved with a before and after: the p99 that did not improve, the cache hit rate that sat at 40%, the plan that flipped to a sequential scan once the table passed a size you can name.
Cost the reversal in steps, not adjectives: expand-and-contract deploys, the dual-write window, the callers who had to be notified, the rows already written in the wrong shape that had to be backfilled or abandoned.
Distinguish reversal from rewrite by naming what you kept. Most good reversals preserve the schema or the interface and undo one decision inside it, which is also why they were affordable.
Finish on the process change: the smallest experiment that would have produced the same measurement in a day, and why you did not run it the first time.

Follow-up

What in that decision was irreversible, and did you know it was irreversible when you made it?
How did you tell the people who had already built on top of the original decision?
What do you now measure before committing to a change of this size?